Wrong page numer (1) when the numer of printed page is 2 using group

I use crystal XI to print a document (facture) from a program.
When the number of printed lines (details) is the max number is possible to print , the number of page (PageNumber) is wrong because the printed page is 2 (the second page is only a line of notes inserted in a group section).
For the sotfware society of the program the problem is the printer driver but i have tested with more then one driver and the error is the same.
what's the problem?
Sorry! My english is not good.
Thank you.

If the page number is in the page header, and the page header prints on each page, then I cant see what the problem is.
Perhaps it is a printer error. Try a different printer and see if it happens.
If a different printer is the same, try putting the page number in different areas of your report.
If still no change, create a new test report and see if it happens there.

Similar Messages

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

TS4009 Why am I receiving emails saying that I have exceeded my iCloud storage, when the methods above show that I am using 4Gb of the 50Gb I have paid for?

Why am I receiving emails saying that I have exceeded my iCloud storage, when the methods above show that I am using <4Gb of the 50Gb I have paid for?

The problem could be that you don't have enough storage on the device itself, not on iCloud. Go to Settings>General>Usage to see how much "Storage" you have available. Farther down the list is the available storage on iCloud.
Also check:
Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud.
A device needs many MB of storage in order to perform a backup to iCloud.
Also see: http://support.apple.com/kb/ht4847

HP Photosmart pro B9180 the color blue prints lavender...using advanced HP photo paper ideas?

HP photosmart pro B9180 win xp no recent changes prior to problem...question is how to get quality color from this printer, the color blue prints lavender, I am using correct ink and hp advanced paper

Hard Reset – While printer is powered ON, pull
the power cord from the printer then from the
wall. After 30 seconds reconnect power to wall
and printer. This will trigger a ‘dirty power up’
and restore the printer to a known good
condition (if it is possible). No user settings are
lost with a ‘hard reset’.
This ‘Hard Reset’ is one of the most powerful
tools to use when the printer hardware is not
functioning properly!
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

When I try to print a 4X6 photo using Elements 12 it prints out 2X3. Does anyone know how you can get hold a live person at Adobe?

When attempting to print a 4X6 photo using Elements 12 it prints out 2X3. Does anyone know how you can get hold of a live person at Adobe?

I've never done a forum and am not exactly sure what to do from here.   I
know how to do a screen shot on my phone, but not on my computer.
I'm about ready to throw every adobe product I have out the window!   If
you purchase a product you should be able to get support from the company.
In a message dated 4/6/2015 3:04:02 P.M. US Mountain Standard Time,
[email protected] writes:
When I try to print a 4X6 photo using Elements 12 it prints out 2X3.
Does anyone know how you can get hold a live person at Adobe?
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in
Photoshop Elements - View the full discussion
(https://forums.adobe.com/message/7412463#7412463)

Wrong DataGridEvent.columnIndex returned when the DG scrolled

Hello all !
Next strange bug for me (using the Flash datagrid is a real challenge !)
I have a datagrid with 7 colums. Because of their widths, I have to use an horizontal toolbar.
When the datagrid is on its initial topleft position, no problem: if I click on the column0, the returned DataGridEvent.columnIndex is 0. If I click on column 3, the returned DataGridEvent.columnIndex 3, the dataField is perfect.
Now, I scroll to the right (scrollpolicy = auto) and the "old" column 3 is the first column I see now to the left in my DataGrid.
If I then click on the "old" column 5, the returned DataGridEvent.columnIndex is .. 2. More than that, the returned dataField is the datafield of the "old" column 2.
In fact, it seems the DataGrid forgets I scrolled to the right and think the newly visible top left column (3) is the zero one.
Is it a known bug ?
How to avoid it ?
Thanks for all

I began to think it was a bug of mines
But no ! I just copied the following code from Adobe examples and got the same behaviour
I just added the event on click to check the row and column indexes.
You'll see: scroll to the rigth and click on a cell: its columnIndex will be 0, 1 or 2 in the event. But, its real columnindex is 5, 6 or 7. How to retrieve this real index ?
Thanks for all
======
/* note: import following classes if needed
import fl.controls.DataGrid;
import fl.controls.ScrollPolicy;
import fl.data.DataProvider;
import fl.events.*;
var i:uint;
   var totalRows:uint = 42;
   var dp:DataProvider = new DataProvider();
   for (i = 0; i < totalRows; i++) {
    dp.addItem({col1:getRandomNumber(), col2:getRandomNumber(), col3:getRandomNumber(), col4:getRandomNumber(), col5:getRandomNumber(), col6:getRandomNumber(), col7:getRandomNumber()});
   var dg:DataGrid = new DataGrid();
   dg.setSize(200,300);
   dg.addColumn("col1");
   dg.addColumn("col2");
   dg.addColumn("col3");
   dg.addColumn("col4");
   dg.addColumn("col5");
   dg.addColumn("col6");
   dg.addColumn("col7");
   dg.dataProvider = dp;
   dg.horizontalScrollPolicy = ScrollPolicy.ON;
   addChild(dg);
   dg.addEventListener(ListEvent.ITEM_CLICK, ListClickedHandle);
   function getRandomNumber():uint {
    return Math.round(Math.random() * 100);
   function ListClickedHandle(event:ListEvent):void {
    trace("ListClickedHandle.click: "+event.rowIndex);
    trace("ListClickedHandle.columnIndex: "+event.columnIndex);

XML DataSource Not Showing When The Rept Is Printed,

My Background: I am new to the VS 2008, but not that new to Crystal, I had experience creating reports against MS SQL, and ODBC data.
Remedies tried:
I have updated VS 2008 to SP3, and updated Crystal with SP and FP to no avail.
Problem
Initially the report worked great, I created a new crystal report and used a XML file as the database through the wizard.
The report worked and looked as expected. I was tweaking it, moving and adding fields and toggling the preview and it was still fine.   I then began trying to add a graphic and then when I previewed it some strange results started displaying like Orange lime, and color references, and nothing related to my XML data. The layout was the same but the data was strange.
I have tried using database expert, and location resetting but the problem persists. I checked the properties, and previewed the data and fields and the correct data shows up. I tried recreating the report from scratch and the problem persisted.
I then tried using a different XML file, made a simple and quick report and the same strange data showed on that report.
In exasperation I used my alternate version of Crystal Reports which I use against MS SQL, opened my original RPT file and `Viola, it shows perfectly with the right data. I turned around and re-opened it through the VS version and it still showed the erroneous data.
I hope my explanation was clear, any help will be appreciated.

I found this page which has your name as the reference
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=235963563
The page displays the titles:
    My Home >
    Business Intelligence (BusinessObjects) >
    Crystal Reports 2008 - Version and Download information for SPs and FPs
    Tools
Crystal Reports 2008 - Version and Download information for SPs and FPs
    Added by Ludek Uher, edited by Ludek Uher on May 06, 2011
The Updates Listed are:
CR 2008 RTM      12.0.0.549      N/A RTM build
FP2.1      12.2.1.412      https://smpdl.sap-ag.de/~sapidp/012002523100013261032009E/cr2008v1_fp21.exe
FP2.2      12.2.2.453      https://smpdl.sap-ag.de/~sapidp/012002523100015097962009E/cr2008_fp22.exe
FP2.3      12.2.3.467      https://smpdl.sap-ag.de/~sapidp/012002523100015892592009E/cr2008v1_sp2fp23.exe
FP2.4      12.2.4.507      https://smpdl.sap-ag.de/~sapidp/012002523100001024152010E/cr2008_fp24.zip
FP2.5      12.2.5.537      https://smpdl.sap-ag.de/~sapidp/012002523100002975192010E/cr2008fp25.exe
FP2.6      12.2.6.567      https://smpdl.sap-ag.de/~sapidp/012002523100004723372010E/cr2008fp26.exe
FP2.7      12.2.7.598      https://smpdl.sap-ag.de/~sapidp/012002523100005755702010E/cr2008fp27.exe
SP3      12.3.0.601      https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
FP2.8      12.2.8.638      https://smpdl.sap-ag.de/~sapidp/012002523100008170752010E/cr2008fp28.exe
FP3.1      12.3.1.684      https://smpdl.sap-ag.de/~sapidp/012002523100010605962010E/cr2008sp3_fp31.exe
FP3.2      12.3.2.753      https://smpdl.sap-ag.de/~sapidp/012002523100015106822010E/cr2008fp32.exe
FP3.3      12.3.3.812      https://smpdl.sap-ag.de/~sapidp/012002523100016815822010E/cr2008fp33.exe
I guess I assumed the link:
SP3      12.3.0.601      https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
Meant the one for VS 2008. This is the one I downloaded and installed, but as you have stated I was mistaken.
There is no reference to SP1.
Since I'm new to this forum, for me its like looking for a needle in a haystack.
Would you be so kind to copy and paste the link as a response to this one. I would appreciate it much.

What is wrong with apple tv when the blue light flashes quickly

I am having trouble with my apple tv device. The blue light flashes continuously and will not reset at all.

Welcome to the Apple Community.
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.

How do I reduce CPU and high Firefox usuage when I mainly just check my email when the box pops up saying I'm using too much

I'm really frustrated because a message pops up all the time when I'm checking my email and then it does something really strange and I can't click on anything to open for a short period of time while it looks like it is reloading. It is so slow and it happens so frequently. What can I do?

You can't avoid that if you use backspace or go back otherwise (toolbar Back button or via the right-click context menu). You will have to use the link or button on that page to go to the inbox.

Playlist shuffle is working even when the button is off...Im using Ipod shuffle 4th gen*

Im using Ipod shuffle 4th gen...And I am not able to stop the songs getting shuffled....For example I want my ipod the play the songs one by one...but its not working...Its shuffling songs by default...I mean the button which stops shuffling the songs(the on off button when placed in the iddle stops shuffling songs) is NOT working....What to do?

If you are trying to play a playlist in the order shown for that playlist (in iTunes), you need to be IN the playlist on the shuffle. You may be in the main "all songs" list on the shuffle, and not a particular playlist. Note: You can have multiple playlists on 4th (and 3rd) gen shuffle, which is why there is a separate "all songs" list.
This article explains how to use VoiceOver, including how to change between playlists.
http://support.apple.com/kb/HT4322
(See Changing playlists and To choose an item from the playlist menu.)

If I apply a per device CAL does it stick with certain devices or when the devices sign off can new ones use the same licences

I purchased a per device CAL and was wondering about this because we have more than 5 devices. If one device is signed on and is using a licence then signs off does that licence become available for a new device then? Or am I stuck with the same 5 devices
even if they are not still signed on.

When an RDS device CAL is issued it remains assigned to the device it was issues to until it expires. It cannot be used by another device until it expires.
An RDS per device cal is set to expire in a random inteval between 52 and 89 days. Once this interval expires, the device Cal is returned to the pool. You can revoke RDS CALs manually (up to 20% of your total) with Remote Desktop Licensing Manager.

Phone usage time increase even when the screen is off?i''m using iphone 5s gold

Is it possible?

VikSweden wrote:
I feel like an idiot for not having spotted this - it was indeed the problem. Not sure when/how I turned this on in the first place but the issue is now fixed.
It's pretty easy to do accidentally if you swipe up the Control Center without meaning to. I also turn of my BT by accident this way every now and then.

What do you do when the music bar dissapears and you cant use the sound buttons

I went to play music and pressed the volume button on the side of my ipad. It was not working at all so i double pressed the home screen and slid all the way to the right and found the circular icon was gone along with the bar showing how loud the music is. Ive reset my ipad and have found its still gone. What can I do to fix it?!?!?!?!

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article is written for the iPhone, the troubleshooting steps are applicable in this situation.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
-Griff W.

HT1595 When the phone is charging, wifi can't use

first, I can connect to wifi.then I take my iPhone4s to charging .after a while ,I want to play iPhone4s again,I found it can't connect wifi.
I restart iPhone4s and it can connect to wifi.
this is the second time it happen.

Welcome to the Apple Community.
I doubt it's anything to do with charging and more likely to be network related.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

When the airplane option is enabled, does it use a lot of megabytes?

There could be a possibility that I may move in the future to an area that doesn't get good 3G coverage. I understand that the airplane mode may boost the signal. I'm jut concerned that using said airplane mode may use a lot of mb's.

Oh, man, I feel truly stupid, lol. (I had read, unfortunately, after this post) in the owner's manual that the airplane mode is used for exactly the reason the 1st person to reply to this post had stated. Dunno, but some misguided apple tech or AT&T employee had told me that the airplane mode would boost a weak 3G signal.
Thanx, all, for your input.

Wrong page numer (1) when the numer of printed page is 2 using group

Similar Messages

Maybe you are looking for