Wrong Path for RRMX transaction (Bex)
Dear All,
I've just installed the SAP GUI 7.10 with Patch 09 and with BI AddOn Patch 7 for GUI 7.10
When I launch the Bex Analyser from the Windows Start Menu it works (I'm obliged to launch first the Bex 3.5 before launching the 7.0 !!! but it's not the subject).
But when I try to use the RRMX transaction, it seems that SAP is looking for the file "SAPBEX0.XLA" in the directory "C:\Program Files\SAP\FrontEnd\BW" although the file is located in the directory "C:\Program Files\Fichiers communs\SAP Shared\BW".
Does anyone have an idea on how to change this path in SAP ?
Thanks in advance
Hi,
There are two parameters in RS_FRONTEND_INIT :
VER_MIN_ANA : min revision which you can open BexAnalyzer
VER_ACT_ANA : actual revision which is better for opening BexAnalyser
You can find the revision level in your BexAnalyzer installation info.
My current version is 1352 for exemple.
There is a note for some problem with the flag VER_MIN_ANA : 1280620
Good luck.
Similar Messages
-
Wrong path for go.bat in portal integration
Hi Friends,
during the configuration of the portal integration in rspor_cust01 I get the message
'Windows can not find C:\usr.......\go.bat'.
Where can I change the path because it is in D:\usr\sap\......go.bat.
Thanks you for any help.
Rg JimbobHi Subbu,
I used workshop page properties to associate the image to the page.
framework/skins/classic/images/home.gif
- Shankar
Subbu Allamaraju <[email protected]> wrote:
Shankar,
Did you use any tag to create the img tag? Do you have any sample
HTML/JSP snippet?
Subbu
Shankar Bala wrote:
I created a new desktop and have the following problem. The imagelinks to portal
pages in the horizontal nav bar in the top have wrong path.
Example.
In the original portal the home page link in the nav bar has a imageassociated
with it in workshop.
\framework\skin\classic\images\home.gif
The partial url generated for the image looks liek this:
\mywebapp\\framework\skin\classic\images\home.gif.
I created a new desktop everything works fine except for the images.The href's
are created for the links but the image path is wrong.
the url generated is : \mywebapp\appmanager\framework\skin\classic\images\home.gif
The "appmanager" in the path causes the problem.
Is this a bug? -
New desktop has wrong path for page links in nav bar
I created a new desktop and have the following problem. The image links to portal
pages in the horizontal nav bar in the top have wrong path.
Example.
In the original portal the home page link in the nav bar has a image associated
with it in workshop.
\framework\skin\classic\images\home.gif
The partial url generated for the image looks liek this:
\mywebapp\\framework\skin\classic\images\home.gif.
I created a new desktop everything works fine except for the images. The href's
are created for the links but the image path is wrong.
the url generated is : \mywebapp\appmanager\framework\skin\classic\images\home.gif
The "appmanager" in the path causes the problem.
Is this a bug?Hi Subbu,
I used workshop page properties to associate the image to the page.
framework/skins/classic/images/home.gif
- Shankar
Subbu Allamaraju <[email protected]> wrote:
Shankar,
Did you use any tag to create the img tag? Do you have any sample
HTML/JSP snippet?
Subbu
Shankar Bala wrote:
I created a new desktop and have the following problem. The imagelinks to portal
pages in the horizontal nav bar in the top have wrong path.
Example.
In the original portal the home page link in the nav bar has a imageassociated
with it in workshop.
\framework\skin\classic\images\home.gif
The partial url generated for the image looks liek this:
\mywebapp\\framework\skin\classic\images\home.gif.
I created a new desktop everything works fine except for the images.The href's
are created for the links but the image path is wrong.
the url generated is : \mywebapp\appmanager\framework\skin\classic\images\home.gif
The "appmanager" in the path causes the problem.
Is this a bug? -
I am using v. 7.1 of Mail under OS X 10.9.1. When I attempt to save an email to my Documents folder I get an error message:
Could not save to path /Users/bob/~/~/~/~/~/~/~/~/~/~/Documents/Payment submitted.rtf. Choose a different path.
Clearly Mail has a bad pathname for the Documents folder. TextEdit documents save properly to Documents. Terminal shows the path to Documents as: /Users/bob/Documents
What is going wrong with Mail?
BobAgreed. I get a completely different wrong path, but only (so far) when I try for Documents. Seems like a bug. Good catch.
Apple - Mac OS X - Feedback -
hello
trying load pic to JWindow
i put png images in "images" folder
and can't load it - always url is null
String filename="images/image1.png";
JLabel label;
URL url=SWindow.class.getResource(filename);
if (url==null) {
System.out.println("url not found");
System.exit(1);
}all ok
trouble was in IDEA dirrectory tree -
Hi
When I try to launch the dataload play user in DEV instance
i am given error about wrong dbc file being used
i check it
its shows a wrong path for my dbc file
any idea where to change this path
OS id RHEl 5
DB 11.2.0.1
EBS 12.1.2Hi
Is the value of the variable "s_fnd_secure" in the $CONTEXT_FILE the same as the value of $FND_SECURE environment variable?
It probably is, but it can't hurt to check.
Have you tried stopping the Apps Web processes (and making sure that there are no process running on the O/S) and then restarting the web server?
This test might be useful ..
1) http://server:port/OA_HTML/jsp/fnd/aoljtest.jsp
2) Click on "Enter AOL/J Setup Test"
3) Run these two tests
a. Locate DBC File
b. Verify DBC Settings
Regards
Frank -
Web Application Transaction Monitoring Alerts with "wrong" Path
Hello,
i have created some web transaction monitors, such as
http://foo.htm who is hosted on the server foo123.cologne.org.
It works.. but
we have also a mssql monitoring, the discovery of the mssql management pack discovers the reporting part of mssql server on our managementserver Operations12.cologne.org. So (it's right..) the server Operations12.cologne.org is a member of the SQL Instances;SQL
Compontents;SQL Computers group.
When the web transaction monitor generates an alert, it have the pathname Operations12.cologne.org and not the pathname of the "right" server foo123.cologne.org.
For our mssql admins i have build an email-notification, when somethings going wrong at our sql servers (member of the SQL Instances;SQL Compontents;SQL Computers group) they received a mail.
The problem is, that they received a mail, when a web transaction monitor generated one, because the pathname is the name of our management server, because the management server is a member of thos sql server groups.
Someone have an idea to fix my "problem"?
- Best way: changing the path names of the web transaction monitorings... but how? i can't find anything to change..
Kind regards
Wolfgang WinterThank you, it's a help to decide, what to do, so i have to solutions:
- installing an agent to the web-appliction-hosting-server and configure it as a watcher node
(may be i will have problems with our firewall admins, because they have to allow the communications and.. when the hosting watcher is down, i have no alerts.. when i use more than one watcher nodes (good).. i have the wrong path names..
- configure a part of our management server group without SQL-Reporter Component as a watcher node
(more easy, because i have to tell my firewall admins: "the server foo456 is the standard watcher node"
Crazy.. because i don't know, how to assign the web transaction monitors to the "causing" server.., for mail notification and for our integration to HP Service Desk... -
Revision: 10877
Author: [email protected]
Date: 2009-10-05 15:23:37 -0700 (Mon, 05 Oct 2009)
Log Message:
Fix a small syntax error in Path bounds calculations that could result in wrong bounds for edge cases involving MoveSegments.
Thanks go to Min for noticing the bug!
QE notes: None
Doc notes: None
Bugs: None
Reviewer: Deepa
Tests run: checkintests
Is noteworthy for integration: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/Path.asorangekay wrote:
That is absolutely unreadable.
I agree completely. How about also providing a link to a set of input files so that we could actually run the code ourselves? Otherwise, there is no chance to debug the source code, it is just a mess.
You might have better luck with an older version of the file. To quote the comments:
// Modified on March 31, 2005. Initialized maxchange in nonlinvoltra() as
// INFTY. Replaced crnmbr() by a similar, but faster routine interior().
// Many thanks to Stuart Anderson for pointing out this shortcut.
I suspect that the "interior" function is just plain incorrect. It doesn't matter if it runs on some other OS. Something about it is wrong and the code is so cryptic that it can't be deciphered. -
several of my songs in itunes gives me the can't locate ! sign. in going to the info for each of those songs i noticed the path to locate the file was in proper format except for the slash marks which were / instead of \ . how can i change the slash makrs in the paths for those songs?
thanks for the info. if itunes is applying the wrong path i.e. - forward slashes in path instead of backward slash how will i ever access those songs I've purchased. it won't let me download them again because it thinks they are on my computer?
-
Teststand 3.0 Deployment looking for a file(glang.chm) in a wrong path
Hi, Please help
i just try deploy an installer using TestStand 3.0. it can successfully process the workspace file, But, when the TestStand deployment tool try to build the installer, it keep looking for one of project file(glang.chm) in a wrong path, the error message is following, see the attachment for the screen shot
Error Code:7
Could not process LabVIEW VIs. Fix any broken VIs before rebuilding. LabVIEW error:
C:\MVS 2\data\data\data\glang.chm - source does not exist
+++++++++++++++++++++++++++++++++++++++++++++++++
i understand that it is looking for glang.chm in "C:\MVS 2\data\data\data\", but in my project, glang.chm actually is under "C:\MVS 2\data\". In order to make it works, i need to create the path "C:\MVS 2\data\data\data\" and copy glang.chm into the path.
My question is: How to change the setting in TestStand deployment tool, so that it would look for glang.chm in corrected path"C:\MVS 2\data\", not in "C:\MVS 2\data\data\data\" ?
Attachments:
error message(screen shot).jpg 184 KBWell, David's solution works as expected. It copies the the pristine .lnk file from the startup menu to the desktop.
This .lnk file will start only the operator interface testexec.exe without loading any sequence.
Now I did try a modification. I did create a .lnk file, which loads the sequence file automagically by providing the right commandline arguments to testexec.exe. This .lnk file works on the development system either I start it from desktop or from some normal directory with the explorer.
And now I try to add that .lnk file to the deployed files like all other deployed files by adding it to some project in the workspace, which is configured to be used in the deployment wizard. That doesn't work.
If there is a 2kb "MySequence.lnk" in t
he development tree,you will also find a "MySequence.lnk" in the Image tree at the expected position. But this is 1396 kb big, which is just the size of testexec.exe ( Labwindows/CVI version) where the .lnk file did point to. And the properties (commandline) of that .lnk file became empty.
Other "normal" files in the same directory, which are also included in the deployment, are copied without any coruption into the Image tree into the same directory as the corupted .lnk file.
The installer will install the corupted .lnk file to the desired position without problems. And copying it with post.bat to the desktop is also no problem. -
would someone please tell me how to find the menu path for any given transaction.
thank youHope below link is useful
http://www.sap-basis-abap.com/sapbs007.htm
Version 4.6C, 4.7 , ECC 5 & 6
Transaction code - search_sap_menu
Version 3.0x
go to transaction SE43
click Utilities - Global Search
Global search in area menu - key in '*'
Find - key in the transaction code you want to find
A list will be display. The line with the word Functions is the Main Menu.
Pls assign points as way to say thanks -
Facing Difficulty while accessing Worksheet through RRMX Transaction
Hi,
I am able to access & run worksheet through analyzer which we access through Start--> All Programs > BEx> Analyzer.
But while accessing same worksheet through RRMX transaction I am not able to access it or if try to find it with description, system gives message 'No entry found'.
Please help me on this.
Thanks,
PradipMake sure you have the latest patches for BEx installed. Also check whether in tcode RRMX_CUST you have the correct version set for BEx Analzyer.
-
My iPhoto is not responding. Whenever I click on the iPhoto icon I get a twirling beachball. It is as if the machine is looking in the wrong place for the photos. How can I see where the machine is looking to find out if this is really the problem. How can I see the path?
Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
If that's the case Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Did DreamWeaver CS5 fix the missing "Volumes" in local file paths for "Browse in-"?
I can't "Browse in Chrome", no matter what I do.
I tried:
Re-Installing Chrome. (It's a drag-drop operation. nothing to install )
Searched in Preferences for a value like the Opendiff to compare documents.
If you select "browse in Firefox" it works. I don't know whether it's Firefox fixing it's DreamWeaver sending the wrong path, but "Volumes" is there.
The problem probably only occurs in secondary partitions on the startup drive.
Apple has not replied about it but it could be Adobe's bug.
I honestly think the "Volumes" idea to access other partitions (not the startup's default) was introducint late, since other apps seem to have the same issue with non obvious operations (Compare Files Service, Apple OS)
Has it been fixed in CS5?
How can I fix it in CS4? I'd glad to hack files if I have to. Re-install is not an option, Com'on! Replace my whole teeth for one caries is not an answer. If the installer can fix it, whoever designed the installer knows what file is the corrupted one.
Thanks.This thread is an extension of the discussion in this thread
http://forums.adobe.com/message/4184846 -
i have created a bapi to upload data for MIGO transaction.. (GOODS RECEIPT-->PURCHASE ORDER)
i am getting the error " stock posting is not possible for this material "'.
when i create directly, it is posted.. while uploading through the program it shows the above error.
please suggest if anyone knows....
Thanks in advance,
Dhivya N.*& Report ZR_MIGO_UPLOAD
*& package name : zabap
*& transport request number : MIDK901443
*& program to upload goods movement
REPORT ZR_MIGO_UPLOAD.
***DATA DECLARATION***
type-POOLs: icon.
TYPES: BEGIN OF TY_GR_PO,
EBELN(10) TYPE c , "'PO NUMBEr
EBELP(10) TYPE c, "PO ITEM NUMBER
* LGOBE TYPE LGOBE, "STORAGE LOCATION DESCRIPTION
LGORT(10) TYPE c, "STORAGE LOCATION
XFELD TYPE c, "ITEM OK
GERNR(10) TYPE c, "SERIALNUMBER
END OF TY_GR_PO.
DATA: TA_GR_PO TYPE TABLE OF TY_GR_PO, "TABLE FOR GOODS RECEIPT PURCHASE ORDER
WA_GR_PO TYPE TY_GR_PO.
DATA: BLDAT TYPE BLDAT, "DOCUMENT DATE
BUDAT TYPE BUDAT, "POSTING DATE
WEVER TYPE WEVER. "VERSION FOR PRINTING GR SLIP
***BAPI DECLARATION***
DATA: BEGIN OF GM_HEAD OCCURS 0. "Material Document Header Data
INCLUDE STRUCTURE BAPI2017_GM_HEAD_01.
DATA: END OF GM_HEAD.
DATA: BEGIN OF GM_CODE OCCURS 0.
INCLUDE STRUCTURE BAPI2017_GM_CODE. "Assign Code to Transaction for Goods Movement
DATA: END OF GM_CODE.
DATA: BEGIN OF GM_RET OCCURS 0.
INCLUDE STRUCTURE BAPI2017_GM_HEAD_RET. "Material Document Number/Material Document Year
DATA: END OF GM_RET.
DATA: BEGIN OF GM_ITEM OCCURS 0.
INCLUDE STRUCTURE BAPI2017_GM_ITEM_CREATE. "Material Document Items
DATA: END OF GM_ITEM.
DATA: BEGIN OF GM_SER OCCURS 0.
INCLUDE STRUCTURE BAPI2017_GM_SERIALNUMBER. "Serial Number
DATA: END OF GM_SER.
data: BEGIN OF ta_bapireturn OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
data: END OF ta_bapireturn.
***declaration of excel file handling table***
FIELD-SYMBOLS: <fs> type any. "field symbol for alsm_excel
DATA: TA_EXCEL TYPE TABLE OF ALSMEX_TABLINE, "table to contain excel sheet values
WA_EXCEL TYPE ALSMEX_TABLINE.
***declaration of other parameters***
data: V_brow type i VALUE 2, "BEGIN OF ROW
V_bcol type i value 1, "BEGIN OF COL
V_erow type i value 65536, "END OF ROW
V_ecol type i value 256. "END OF COLUMN
DATA: V_sear type string,
V_INDEX TYPE i,
V_tabix type sy-tabix, "current line.
v_lines type i. "total number of records
DATA: DATE TYPE DATS.
***SELECTION SCREEN***
***SELECTION SCREEN DESIGN***
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP 3.
PARAMETERS: zCODE(2) TYPE C MATCHCODE OBJECT H_T158G,
zrefdoc type REFDOC,
version type WEVER.
SELECTION-SCREEN skip 5.
PARAMETERS: p_file type ibipparms-path.
SELECTION-SCREEN SKIP 3.
SELECTION-SCREEN END OF BLOCK b1.
***SELECTION SCREEN VALUE REQUEST***
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME' "f4 help for file name
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE.
***SELECTION SCREEN EVENT***
AT SELECTION-SCREEN. "validation
if p_file <> ''.
V_sear = p_file.
SEARCH V_sear for '.xls'.
if sy-subrc <> 0.
message 'please provide excel file. it is not valid' type 'E'.
ENDIF.
ENDIF.
INITIALIZATION.
* DATE = '17.04.14'.
GM_HEAD-PSTNG_DATE = SY-DATUM.
GM_HEAD-DOC_DATE = SY-DATUM.
gm_head-pr_uname = sy-uname.
***START OF SELECTION***
START-OF-SELECTION.
gm_head-REF_DOC_NO = zrefdoc.
gm_head-VER_GR_GI_SLIP = version.
GM_CODE-GM_CODE = zCODE.
PERFORM EXCEL_UPLOAD.
PERFORM EXCEL_CONVERSION.
PERFORM NO_RECORDS.
END-OF-SELECTION.
PERFORM BAPI_ASSIGNMENT.
PERFORM BAPI_FM.
*& Form EXCEL_UPLOAD
* text
* --> p1 text
* <-- p2 text
FORM EXCEL_UPLOAD .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FILE
I_BEGIN_COL = V_BCOL
I_BEGIN_ROW = V_BROW
I_END_COL = V_ECOL
I_END_ROW = V_EROW
TABLES
INTERN = TA_EXCEL
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3.
ENDFORM. " EXCEL_UPLOAD
*& Form EXCEL_CONVERSION
* text
* --> p1 text
* <-- p2 text
FORM EXCEL_CONVERSION .
if ta_excel is NOT INITIAL.
sort ta_excel by row col.
clear wa_excel.
clear wa_GR_PO.
LOOP AT ta_excel INTO wa_excel.
move wa_excel-col to v_index.
ASSIGN COMPONENT v_index OF STRUCTURE wa_GR_PO to <fs>.
if sy-subrc = 0.
move wa_excel-value to <fs>.
ENDIF.
at END OF row.
append wa_GR_PO to ta_GR_PO.
clear wa_GR_PO.
ENDAT.
ENDLOOP.
else.
MESSAGE 'no data for conversion' type 'I'.
ENDIF.
ENDFORM. " EXCEL_CONVERSION
*& Form NO_RECORDS
* text
* --> p1 text
* <-- p2 text
FORM NO_RECORDS .
DESCRIBE TABLE ta_GR_PO LINES v_lines.
if v_lines = 0.
MESSAGE 'NO RECORDS TO UPLOAD' TYPE 'E'.
ENDIF.
ENDFORM. " NO_RECORDS
*& Form BAPI_ASSIGNMENT
* text
* --> p1 text
* <-- p2 text
FORM BAPI_ASSIGNMENT .
IF TA_GR_PO IS NOT INITIAL.
LOOP AT TA_GR_PO INTO WA_GR_PO.
gm_item-PO_NUMBER = wa_gr_po-ebeln.
GM_ITEM-STGE_LOC = WA_GR_PO-LGORT.
GM_ITEM-PO_ITEM = WA_GR_PO-EBELP.
GM_ITEM-NO_MORE_GR = 'X'."WA_GR_PO-XFELD'.
* GM_SER-SERIALNO = WA_GR_PO-GERNR.
gm_item-NO_MORE_GR = 1.
gm_item-ENTRY_QNT = 2.
gm_item-MOVE_TYPE = 101.
* gm_item-MVT_IND = 'B'.
gm_item-plant = 'P001'.
gm_item-move_stloc = 'FG01'.
* GM_ITEM-SPEC_STOCK = 'K'.
APPEND GM_ITEM.
APPEND GM_SER.
ENDLOOP.
ELSE.
MESSAGE 'DATA IS NOT UPLOADED' TYPE 'I'.
ENDIF.
ENDFORM. " BAPI_ASSIGNMENT
*& Form BAPI_FM
* text
* --> p1 text
* <-- p2 text
FORM BAPI_FM .
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = gm_head
GOODSMVT_CODE = gm_code
* TESTRUN = ' '
* GOODSMVT_REF_EWM =
IMPORTING
GOODSMVT_HEADRET = gm_ret
* MATERIALDOCUMENT =
* MATDOCUMENTYEAR =
TABLES
GOODSMVT_ITEM = gm_item
GOODSMVT_SERIALNUMBER = gm_ser
RETURN = ta_bapireturn
* GOODSMVT_SERV_PART_DATA =
* EXTENSIONIN =
if ta_bapireturn-type = 'S'.
write:/ icon_green_light as icon,
'success: Material document',gm_ret-mat_doc, 'is created for the GOODS RECEIPT- po number : ', wa_gr_po-ebeln,
/ 'reason:' , ta_bapireturn-message.
ELSEIF ta_bapireturn-type = 'E'.
write:/ icon_red_light as icon,
'error: Material document',gm_ret-mat_doc , 'is not created for the GOOD RECEIPT- po number : ', wa_gr_po-ebeln,
/ 'reason:' , ta_bapireturn-message.
ENDIF.
ENDFORM. " BAPI_FM
Maybe you are looking for
-
G505s random cpu throttling!
This is really frustrating, my cpu can't decide what frequency it should be at when I'm running fullscreen applications. It keeps jumping between 900, 1400, and 2500 mhz. No this isn't the charging issue and my bios is 2.05. The other issue I have is
-
Unable to print numerous different PDFs from a corporate website. Each file has similar header, images, length, appearance. Opening the files online I receive the message "Insufficient data for an image" but the images do appear after I scroll down a
-
Abap proxy cx_ai_system_fault in runtime
Hello Experts, Am getting exception "cx_ai_system_fault" through calling the proxy method in program in run time. If I execute in sproxy-->test am able to get the record/response . could you please suggest me . also i have tested all the Proxy to PI
-
Is there a glitch in my indesign? Jumping layers
When I try to export to a pdf. there are random layers on each page that end up either dissapearing or jumping somewhere else on this page? Is that normal? What can I do? Would adobe be able to fix it or give me a new version that works properly if t
-
How to copy the value of default view textbox into another view textbox
I create one form library and customizing in infopath 2010. on this default view one textbox is placed. in which user will enter his name. I create another view. in which i also place second textbox. I want when user put his name in default view text