Wrong paths in WGM Home tab. How to correct?

I'm having some trouble with creating home directories on my server. The create button is not working and there are a couple of bad paths in the WGM Home tab. How can I delete these entries in the Home tab and make sure that only valid paths are in there. I am unable to delete a couple, the minus button is greyed out.
Just to provide a little further info, I had DNS running on this server (I think incorrectly) and one of the paths that I cannot delete is a path listing the server with it's DNS name /Network/Servers/ns.eocserver.local/Users/<user>.
The path should be /Network/Servers/eocserver.local/Users/<user>. How do I clean up these entries?

Here's another interesting aspect to my predicament. If I log into terminal, instead of showing:
eocserver:~ administrator$
for my terminal prompt i get the following:
ns:~ admin$
My server is called "eocserver" and not "ns" and my DNS is now shut down.
Another curious thing is that now any new accounts that are created load on the client eMacs within a second compared to at least 30 seconds before this all happened. Not sure why that is but that part is awesome. Since the day this server was set up clients have had to wait for at least 30 seconds for their accounts to load on the client machines.
It's like something went wrong and as a result the login process for clients is way better. This is rather disconcerting and I'd like to clean it up but I don't want the lag to return.

Similar Messages

My current tabs are below Firefox home tab, I want them aline next to Firefox home tab, how?

Hi,
Previously tab settings of my Firefox browser were set to default settings (I guess) as it was set as the colored Firefox home tab with its drop down button were set at left top corner of the window and then the other tabs were set just next to it on the same aline. Now the tab settings ate changed with top left is the Firefox home tab, the other tabs are just down to it.
I like to have my previous settings back as it was all in the same aline. Would you please help me out of the issue?
Thanks,
Regards,
Cyberkhan

That is only possible if you run Firefox with a maximized screen.
You can look at this extension:
*Tabs Always In Titlebar: https://addons.mozilla.org/firefox/addon/tabs-always-in-titlebar/

Wrong path while creating Home-directory

Hello,
i hope i am in the right directory for my question!
Under Leopard Server I set up an DNS Server wich works quite good so far...
When i try to set up the Home-directory for an new user the networkpath is always wrong.
My normal server adress is : "hale.school.private" the Usergroupmannager always set "afp://hale.private/user"!
Where can i change this?

_*Here an Copy of my changeip command:_*
+hale:~ Administrator$ sudo changeip -checkhostname+
Password:
+Primary address = 192.168.2.107+
+Current HostName = hale.school.private+
+DNS HostName = hale.school.private+
+The names match. There is nothing to change.+
_*And here theproblem in the Workgroupmanager:*_
Message was edited by: sykane

WGM Home directory full path not populating properly

I'm setting up WGM with mobility as all of my network users are on laptops. For some reason some of the users are working and others not. When I try to log in with some I just get told that the user couldn't log on because an error occured. As far as I can work out this is because the home directory for the user on the network can't be found and so a local one can't be created either.
The only difference I can see between the users (bearing in mind this is a brand new network set up so I haven't made many changes) is that for the users that do work when I select the SharePoint I want to use under the home tab in user settings, the Full Path has ...er ...well the full path in it: /network/servers/mynetwork/Volumes/myharddrive/myfolder/myuser
whereas ones that don't work just have the folder name: myuser
This not only happens when I use the auto populated list as well as when I create one from scratch.

You're right, DNS implementation in Leopard server is very poor, especially considering how critical it is.
Time Machine for every user is a bit of a tricky one - I've been thrashing this one out in another thread, and there is an answer, but it's not ideal.
Here's the thread: http://discussions.apple.com/thread.jspa?threadID=2034769&start=0&tstart=0
The answer on how to do it is at the end of the thread, but make sure Time Machine isn't used as the only method of Disaster Recovery on a corporate network, it's really only good for a useful extra.
As for an internal and external DNS server, the answer I'm afraid is "not really". The way you have it set up is pretty good, from a redundancy point of view. However, if you have to use an external DNS server, it's always going to be slower, because of the extra distance over slower links that the DNS request has to travel.
Bear in mind, it has to go through your router and/or firewall, all the way out to a busy DNS server somewhere out on the net (probably over a number of routers on the way), then it has to come back the same way before your client can actually resolve the URL to an IP address.
Compare that to internal where it has to travel a matter of metres over a (I assume) 100mbps network to a DNS server that's not processing very many requests.
The only workaround I could suggest would be to employ a second DNS server (perhaps a proxy?) within your network assuming you can separate it from whatever causes your primary DNS server to go down. The costs aren't prohibitive - you could do it on a Mac Mini + cost of a second Leopard Server license.
Oh, and your English is just fine, lol.
Message was edited by: MattLucas1505

I entered the incorrect password for my home wifi network and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

Settings > wi-fi then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
Now at the top tap on "forget this network".
After that, the iPhone will think your home network is a new network and will ask you for the password to connect.

Avg/yahoo page comes up when i open a new tab how can i change it back to my home page

avg/yahoo page comes up when i open a new tab how can i change it back to my home page. it does have a get rid of this page button but it is a link t buy the full edition of avg.
== i downloaded avg free edition

BY removing avg toolbar from your firefox adds-on should remove this problem

When I open a new tab, how can I get the second tab to be me my home page also?

I know how to right click and open a new tab when I am browsing but if I want to open just a blank new tab, how can I get the second tab to be my home page also?

I know how to right click and open a new tab when I am browsing but if I want to open just a blank new tab, how can I get the second tab to be my home page also?

How can i stretch pictures in picture library webpart and remove the home tab that comes with the site

Hello people
how can i stretch images to fit into my picture library webpart?
also how can i remove the Home tab that comes with change the look.

Hi,
Let’s verify the following:
Whether you use the picture library web part or Image Viewer web part or Picture Library Slideshow Web Part.
I think you should custom the web part to stretch images to fit into your web part. There is no OOTB method to achieve it.
Whether the home tab is your library name.
To remove the Home tab, edit the web part->Appearance->”Chrome” choose none.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

When am opening new tab, iam getting some website instead of my home page ,how can I set my new tab page?

Iwant to configure my new tab with google which is my home page,how can I do that,can any one give suggestion to me please?

A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can middle-click or hold down Ctrl and left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can use an extension to set which page to open in a new tab:
*NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
*My Homepage: https://addons.mozilla.org/firefox/addon/my-homepage/

Wrong number of policy violations in Home tab

We deleted manually entries in the mgmt_current_violation table. On the detail tab of policy violations, theses entries are gone. But on the Home tab the number of policy violations is still the old one.
Would be nice if someone can explain this to mee.
best regards
sascha

Andy,
thanks for your reply. To answer your questions
> I'm assuming that read rights have been granted.
in fact read rights have been granted
> For the GWChecks, please confirm that it was a Contents check/fix.
yes, it was
> Do you have regular GWChecks on Contents?
Yes, we do process weekly contents checks every Sunday at 1:00 AM on the PO since we introduced GW in 2002.
Today I found time to check some things out. I retracted the proxy rights on the computer of the affected user and reassigned them. I tried this several times with and without restarting the GW-Client as well as on my computer and on the computer of the affected user.
The next thing I tried was assigning the proxy rights from another PC. I did not just grant read rights but any rights available and was successful: I saw any item in the mailbox and even the mailbox properties told me the number of items. For testing purpose I retracted the proxy rights and reassigned them again as I exactly did before and surprisingly did not succeed. I tried this several times even with reduced (means just read) rights without any success.
Next step was to analyze the rules on the account of the affected user. She has a long rule which finally says that mails received from or sent to special addresses should be marked 'private'.
Finally I reassigned the rights again from another computer I hadn't used before and granted any rights available again. This method again was successful.
The problem is that I don't know why... :-)
Anyway - thanks again and a happy new year!
Regards,
jgoy

IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball. I almost think it is looking in the wrong place for the pictures. How do I redirect it back to the Mac hard drive?

My iPhoto is not responding. Whenever I click on the iPhoto icon I get a twirling beachball. It is as if the machine is looking in the wrong place for the photos. How can I see where the machine is looking to find out if this is really the problem. How can I see the path?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
If that's the case Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

GetRequestURI outputs wrong path

I've written a servlet Counter that outputs a jpeg image. I setContentType to "image/jpeg". And it works nicely when I coded a IMG tab ie. <IMG src="servlet/Counter"> in my index.htm page from the root directory.
However I notice that the request.getRequestURI(); statement in my counter servlet now returns the path where the servlet is (ie servlet/Counter) rather than the html page that calls it (ie root/index.htm).
How can I rectify this to get the caller's URI rather than the servlet path ?.
Rags

Thanks Kare for your response.
>>
I've written a servlet Counter that outputs a jpeg
image. I setContentType to "image/jpeg". And it works
nicely when I coded a IMG tab ie. <IMG
src="servlet/Counter"> in my index.htm page from the
root directory.
However I notice that the request.getRequestURI();
statement in my counter servlet now returns thepath
where the servlet is (ie servlet/Counter) ratherthan
the html page that calls it (ie root/index.htm).
There is nothing wrong with your servlet container.
When changed the servlet to output to contenttype txt/html and output the counter as html code; Using the SERVLET tag (vs the IMG tag), the method getRequestURI() returns the path I want (i.e html path).
It looks like
How can I rectify this to get the caller's URIrather
than the servlet path ?.Maybe you can give the page name as an argument for
the Counter servlet.
like: <img
src="servlet/Counter?page=root/index.html">
and the in servlet code call:
request.getParameter("page");
The whole purpose of implementing this is so that I don't have to specify the path. Any other ideas ?
regards
Rags

Wrong path and application in registry protocol\stdFileEditing\Server ?

Hi
How come there is a wrong path in registry is it a security issue, error or just values not in use anymore ?
I check via regedit: HKEY_CLASSES_ROOT the key .pdf points to
AcroExch.Document the key curver points to AcroExch.Document.7
Under this i check
HKEY_CLASSES_ROOT\AcroExch.Document.7\protocol\StdFileEditing\server
the value is
"C:\Program Files\Adobe\Reader 9.0\Acrobat\Acrobat.exe" (Acrobat catalog and the exe file is not existing)
but in my filesystem the real path is
C:\Program Files\Adobe\Reader 9.0\Reader
and i think the program should be AcroRd32.exe instead
When I have corrected the key an update would reverse it to the old not existing value
So could anyone tell me why i se this behaviour ?
Regards
SEJ

Hi Frank,
How did you call the application in a war?
Regards,
Violeta

Wrong path for go.bat in portal integration

Hi Friends,
during the configuration of the portal integration in rspor_cust01 I get the message
'Windows can not find C:\usr.......\go.bat'.
Where can I change the path because it is in D:\usr\sap\......go.bat.
Thanks you for any help.
Rg Jimbob

Hi Subbu,
I used workshop page properties to associate the image to the page.
framework/skins/classic/images/home.gif
- Shankar
Subbu Allamaraju <[email protected]> wrote:
Shankar,
Did you use any tag to create the img tag? Do you have any sample
HTML/JSP snippet?
Subbu
Shankar Bala wrote:
I created a new desktop and have the following problem. The imagelinks to portal
pages in the horizontal nav bar in the top have wrong path.
Example.
In the original portal the home page link in the nav bar has a imageassociated
with it in workshop.
\framework\skin\classic\images\home.gif
The partial url generated for the image looks liek this:
\mywebapp\\framework\skin\classic\images\home.gif.
I created a new desktop everything works fine except for the images.The href's
are created for the links but the image path is wrong.
the url generated is : \mywebapp\appmanager\framework\skin\classic\images\home.gif
The "appmanager" in the path causes the problem.
Is this a bug?

Update Reader 9.5.2. Windows7 wrong path

Waar kan ik het correcte pad invoeren?

Sorry, I have no idea what "wrong path" you are talking about? An error message during the update? How are you updating?
Maybe and uninstall (using http://labs.adobe.com/downloads/acrobatcleaner.html) and reinstall will fix the problem?

Wrong paths in WGM Home tab. How to correct?

Similar Messages

Maybe you are looking for