Wrong position while the rendering process

I have a very curions problem with After Effects CS6. I just made a composition with different tracked images which are in a video footage. In the preview everything is shown correctly. But when I want to start to render the grafics are not shown respectively in the wrong position. For making you a better understanding of my problem I just want to describe the scene of the composition. It is a scene in which a little boy is going along a street. He passes a shop with large windows. On these windows I try to implement some graffities. Because of the fact that the camera moves I had to track the movement so that the graffities on the windows are moving with the rest of the picture. For the tracking I use zero-objects. Because the boy covers on some parts of the scene the windows I uses also some masks. It's a lot of masks and grafics/graffities. As I told you the preview shows me all compositions correctly. But not the rendering. It shows the grafics on the wrong positions and some grafics are completely hidden. I tried so many things for correcting it. Had it to do with the so-called "priority" of the different layers in the timeline? Thanks for helping me.

We need a screenshot or a complete description of your composition with all the properties of the layers and question revealed. Without details a solution to your problem is nearly impossible.
I have never had a render look different than my main composition Active camera view 

Similar Messages

  • I am trying to export a movie through imovie using the share function, but each time imovie seizes up and stops working about halfway through the rendering process and I can't proceed and have to turn off the computer. Can this be fixed?

    I am using iMovie and can't seem to complete a render of a completed project through the sharing/media browser. Trying to create a medium size movie that I can then access in iDVD to burn a DVD.
    But each time I try, iMovie quits on me about halfway through the rendering process.
    I have successfully used media browser to create other movies, but now it doesn't work.
    Anybody know of any fixes or troubleshooting?
    Thanks.
    Stuart Schwartz
    [email protected]    

    When trying to troubleshoot my problem I discovered a forum that was saying certain NTFS drives work just fine
    Apple support says that an NTFS or exFAT drive cannot be used when connected to the AirPort Extreme.
    I suppose it is possible that someone might have been using some type of special software on the drive that might perform a "conversion", but without more details, it is hard to know.
    Note: ExFAT and NTFS formats aren't supported.
    http://support.apple.com/kb/HT2426

  • HT4759 Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why

    Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why I need to deactivate the space service and take my money back .. Thanks

    The "issues" you've raised are nothing to do with the iCloud service.
    No service that uploads data allows you to disconnect the device you are uploading from while uploading data. Doing so would prevent the upload from completing. It is a basic requirement for any uploading service that you remain connected to it for uploading to be possible.
    The time it takes to upload data to iCloud is entirely dependent on how fast your Internet connection is, and how much data you are uploading. Both of these things are completely out of Apple's control. Whichever upload service you use will be affected by the speed of your Internet connection.

  • CS6 3d: how do I stop the rendering process?

    How do I stop the rendering process in CS6 3d? You used to be able to just click the mouse.

    Steve:
    Thanks for working with me on this. I'm not much of a techie, so bear with me. This is the info I think you were referring to. If it's not, just let me know and I'll try and get it.
    Hardware Overview:
      Model Name:     iMac
      Model Identifier:     iMac10,1
      Processor Name:     Intel Core 2 Duo
      Processor Speed:     3.06 GHz
      Number of Processors:     1
      Total Number of Cores:     2
      L2 Cache:     3 MB
      Memory:     12 GB
      Bus Speed:     1.07 GHz
    Chipset Model:     ATI Radeon HD 4670
      Type:     GPU
      Bus:     PCIe
      PCIe Lane Width:     x16
      VRAM (Total):     256 MB
      Vendor:     ATI (0x1002)
      Device ID:     0x9488
      Revision ID:     0x0000
      ROM Revision:     113-B8030C-253
      EFI Driver Version:     01.00.367
    If you have any questions or concerns please don't hesitate to contact me.
    Dennis

  • You purchase properties in Arab game (Sultan desert), while the procurement process and the discount amount lost contact wrote the running game has been cooperation from them but the problem!  I can't buy any properties in the game itself and the science

    You purchase properties in Arab game (Sultan desert), while the procurement process and the discount amount lost contact wrote the running game has been cooperation from them but the problem! 
    I can't buy any properties in the game itself and the science I don't use jailbreak and two free jailbreak is there a program hindered the procurement process so that I can buy anything from the store

    Hello milkisoo,
    Wow! Purchasing a new computer and monitor should be a fun and exciting experience, and instead, it sounds like it’s turned into a complete nightmare. I can only imagine your disappointment when you found two charges relating to its purchase on your debit card account, and I’m sorry for any aggravation this caused. 
    As I want to provide you some piece of mind, I pulled up your order number using your email address attached to the forum. After review of its payment information, I found we collected only one payment.  However, when orders are first placed on BestBuy.com, a pending authorization should show up on your bank card to make sure funds are available for the order until it is fulfilled. From there, the authorization should drop off and the collection charge should appear.  This is the case for your one charge of $1,051.69.
    It also sounds like an error may have occurred when you initially attempted to place your order,  resulting in one of your gift cards not registering properly and the order not being completed.  Your card’s issuing bank doesn’t appear to have recognized this and pushed through the pending authorization. This occurred a second time when your account information didn’t quite match up with what we had on file. Please know that we haven’t ordered a collection of these funds and your issuing bank should release the two pending authorizations within 5 to 7 business days.
    Thank you for posting.
    Alex|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Wrong position of the APEX IR dropdown menus

    After I customized IR theme with my own css, the menus drop down at the wrong place in IE. However this works fine in Firefox.
    Can anyone help please?

    I found the solution.
    In the css of our company, the width of the body is 760px.
    Since the position of the dropdown is calculated relative to the body, this causes the problem.
    U can fix it by overriding the width of the body like this:
    <style type="text/css">
    body {
    width:100%;
    </style>
    I think it should work too if you do not specify any width for the body.
    Thanks!

  • SQL server agent jobs throws random errors while the ETL process works fine.

    Hi,
    I have this problem with SQL agent jobs.
    We went from sql2008 to sql2012 and migrated SSIS without problems. The ETL process runs fine and the OLAP cubes are processed.
    I have a job which calls the master execution dtsx for a particulair customer. When the ETL load and OLAP is processed it should go to the next customer. The problem i have is that the agent logs some errors for random customers. I tried to do only two clients
    in one job this works then i add the third client and then it fails (log wise) for a customer which did run successfully before when there were only two customers.
    Despite the error message the ETL did run, there were no duplicate keys and OLAP was processed???
    Im very close to pull all my hair, because some combinations like two customers work, and placing these two customers with a third one it then fails again. (again cubes are processed and data is integer yet i keep getting these annoying errors in the log)
    Perhaps someone could help me further. 
    -Miracles are easy, the impossible takes a bit longer-

    Just double-click on the Agent job, then click on Steps property page (on your left), you must be able to see a list of steps with the action "On Failure" which you should examine.
    Arthur My Blog

  • Does Adobe Dynamic Links slow down the rendering process ?

    Hello everybody,
    I have a question concerning Adobe Dynamic Links.
    This is my problem :
    I work on After Effects. I have a composition that is rendered quite fast. (almost in real time...)
    But when I open the linked comp in Premiere Pro, it lags as hell. Maybe 2x, 3x slower.
    So I'd like to know why Adobe Premiere Pro is slow, while After Effects is fast ?
    Is this normal ?
    What can I do about it ?
    Thanks,
    Regards.
    Josef Retsnbergïk

    Todd_Kopriva wrote:
    Because you wouldn't want After Effects to take over all resources from Premiere Pro when you are working primarily in Premiere Pro and just using After Effects as a helper application through Dynamic Link.
    But I primarly see this when I'm exporting via AME. This pulls in not only PPro, but also AE, etc., all through DL. And everything comes to a halt whenever a lower third shows up to be rendered, because AE serializes the process. So my eight core processor becomes a one core processor until that seven seconds or so of footage goes by. And that, is silly. Sorry to have to call it what it is. And it's a serious performance problems that Adobe should address and fix. Truly.
    I guess my "real" question is, why is this an Abobe problem in the first place? This is, or at least should be, an OS resource allocation and scheduling problem. Same as memory allocation should be handled by the OS's Virtual Memory system and not by Adobe. I was taught that problems like this were the whole point behind the a multi-tasking scheduler.  Yeah, I know -- back then we had Unix and VMS, and today we have Windows and OSX. This is... progress?

  • Why is the rendering process slowing right down?

    Hi,
    I'm rendering a 4 minute clip of Pro Res LT files, there's a few effect on it but right now I'm only rendering the video at 1/4 quality.
    It starts rendering fine. Then starts to slow down, and by the time it gets to about 99.35%, it takes hours to render about 0.10 %, still rendering now, has been rendering over night, and is still on 99.54 %.
    Every time it renders another frame, it adds another frame onto the amount that still needs to be rendered. And the estimated amount of time left stays about the same - between 3 and 4 minutes (not true).
    I'm working on a Mac, with 4GB of RAM, but also rendering to an external hard drive that should have about 400GB free.
    Help please!
    Ashleigh

    ah! "locate" is a command you can use to search (inside Terminal,) though you should keep in mind that its database is only updated once a week by default, however, you can update it manually whenever you like, which takes a few minutes, using (in Terminal):
    sudo /usr/libexec/locate.updatedb
    actually, you could always automate that by adding this to the following file: "~/.bash_profile"
    [begin --don't include this line]
    alias locate='if [ $((`date +%s`-`eval $(stat -s /var/db/locate.database); echo $st_mtime`)) -gt 3600 ]; then echo "locate: db is too old!">/dev/stderr; sudo /usr/libexec/locate.updatedb; fi; locate -i'
    [end --that code is all you need, and it needs to be kept together, all in one line]
    f.
    Note: if you need to create the file, (in Terminal) use:
    touch ~/.bash_profile

  • I would like to see a pause button available during the rendering process

    This feature is available with the Adobe Media Encoder but it would be very useful inside of Encore as well. It would also be useful for cases of unexpected interruptions duing rendering if Encore were smart enough to pick up where it left off. I don't think either of these scenarios are programmatically impossible to address.

    I don't know how often (if ever) Adobe reads here... so you might also go to
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • How do I keep Adobe Premiere Elements 11 from crashing during the rendering process?

    I have already published a video, but I had to go in and make some images and texts clearer. I didn't add anything, I just changed them. Now the program will only render to 84% and them an error message pops up and asks me if I want to send a report or not. No matter what I choose, it still shuts the whole program down. I will try to re-open the program with the same file and it will just shut off. I have to restart my computer just to get back in the program. Why is it doing this and is there anything I do to fix it, in light of re-making my video?

    Try doing a Save As and renamed your video. Then render your output. This will keep your new render files from "bumping into" your old render files.
    If that doesn't work, please provide more information about your system.
    What operating system are you using? How fast is processor and how much RAM do you have? How much free, clean, defragmented space is on your hard drive?
    What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements to get the video from your camcorder to your computer?
    What Publish & Share option are you using to output your video?

  • How do you have the help file .chm hold its window position when the user resizes the help window.

    One of my customers is complaining that the help contents will scroll out of view when the window is resized.  Is there a way to anchor the position while the window is resized?

    My CHM is a help file for an application. The application uses F1 to open specific topics for help.  Therefore the help file needs to be visible but not cover the application to much. The Content in this situation is text however the help project contains Images, tables, text, etc. 
    If the user searches for the word "audio" in the search and it takes them to a section or sub topic that is half way down in the Topic, they would like that section or subtopic to stay in the same place as they resize the help window.  Using Bookmarks if the topic is large enough clicking the search link will place the results in the top left of the doc view window, however this is not necessarily the top of the topic. 
    Im not sure how else to explain what the user is seeing, sorry.
    Please explain "Also whether it remains consistent depends on whether an absolute or percentage value has been added to it."

  • IMac quits working in rendering process

    Hi,
    I've got an Intel iMac core2Duo 2,66GHz that is working on an external FW800 128GB SSD due to an failure of the internal Controler more than a year ago.
    During the rendering process of an HD-video with iMovie the black box appeared, that orders you to shut down your computer, and restart...
    I did as I had been told, and I was left with a blank dark screen just with the starting noise of the DVD-drive, that is dying after several seconds and then with nothing, nada,......
    Any ideas what's going on?
    Do I have to dump my iMac or is there any light on the computer wreck horizon?
    cheers

    Does it boot into any of these modes?
    Holding Option/alt key at bootup.
    Holding SHIFT key at bootup.
    Target mode...
    http://support.apple.com/kb/HT1661
    We might get clues with verbose mode...
    http://support.apple.com/kb/HT1492
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214

  • Notes snapping in the wrong position?

    I am experiencing an annoying problem in Garage band 11 (6.0.4). I'm writing a music placing notes along the track and using software instruments. The problem is that after a while, the notes start to fall out of place and play on the wrong tempos. every time I try to fix their position, the notes always snap to wrong position again. Does Anyone have the same problem? Is this a bug?

    If you suspect that the graphical user interface is not responsive, you may have a problem with your User Preferences. Try HangTime's universal fix for "oddball problems"
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs

  • When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.

    When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.
    What am I doing wrong?

    Read and answer the questions posted by Bengt Wärleby in this thread: Cant burn my idvd project to...: Apple Support Communities
    OT

Maybe you are looking for