Wrong print preview and printed color from Lightroom 1.3

I am running Vista Ultimate and i just installed the driver for my Canon PIXMA Pro9000.
When i try to print from Lightroom 1.3 the colors are very muted, even when i do print preview the colors are wrong in the print preview screen.
No matter what i do i cant seem to get lightroom to Print Preview AND print with the right colors.
The image on this link http://www.pbase.com/charld/image/94711330
(on the left) is what i see and get when i do a print preview and print and my monitor image is on the right.
If i use Canon DPP the colors are not that bad, its a bit dark but that was easily fixed and i can get it quite close to what i see on the screen. My monitor is not calibrated..The images were all shot in RAW and converted to DNG...Do i need to re-install Lightroom as i don't think print preview has anything to do with the printer i have attached....
Thanks

I got the solution from another forum:
http://www.lightroomforums.net/showthread.php?t=1613
1. in the Print module, clicking on the Print Settings button ...
2. Choose your media type
3. Under Print Quality choose High
4. Under Color Intensity choose Manual. In the subsequent dialogue box choose None.
5. In the Print right hand panel under Color Management choose your print media - PR1 for Photo Paper Pro, SG1 for semi-gloss &c
6. Rendering intent Perceptual.
7. Hit Print and OK.
this resolved my issue!!

Similar Messages

Difference between execution mode of Print preview and Print for Output

Hello,
Can anybody tell the difference between execution mode of print preview and print for an output (For eg. PO output or Invoice)?. I am trying to download some documents linked to Purchase order to desktop. The code is written in the same driver program for printing PO and it is executed after smartform function module is called. It works fine in print preview mode and it fails in print mode. The reason why download fails in print mode is that GUI not available (just found from debugging).
Any ideas?
Thanks
Anil

HI
try using any other printer and find out if you are getting the correct output. The printer needs to support Multiple Unicode encoding schemes like UTF 8, UTF 16BE, and UTF 16LE, plus special characters and logos, bi-directional text layout, and custom characters..

Print preview and print doesn't show the correct out put result when i connnected with EPSON LX-300+II

I hava an html webpage with css & print css. The print preview and print doesn't give correct output there is alignment problem when i connected with EPSONLX-300+II. But iam connected with hp laserjet they show the correct output with firefox. Please fix the problem as soon.....

I have same problem as you, but later I know how to deal with it.
1. change your print default preferences to
print quality into (120x144 dpi, or other which suites you)
mine goes well to 120x144 dpi
2. Before print enter File->Page setup, set true to option shrink to page width
in order to fit your page into your desired paper
(firefox will resize your content to suit the paper you choose).
If you dont want this you can disable this option.
3. Still in Page Setup, if checkbox "Print background (color & images)" is unchecked then
white text will be printed black.
Set this checked if you want to print white text as it is color.
I hope it answers your question.
Steve
http://www.dailymobilegames.com

Problem with Print Preview and Print events

Hello Experts,
We have developed a program, in which, I m trying to display the % values in the Sub Totals and Grand Total lines, The logic and program functionality is performing very well. The report is displaying the output the way end user is willing to see.
The main problem is, the entire % values are going to a toss when we click the Print Preview or trying to print the report, which is not supposed to go that way. I have even tried to debug the program where the problem is evolving in the code, but it is not raised from the code.
Please refer to the screen shots.Before clicking the Print Preview and after clicking the print preview.
Do anybody face the same kind of problem ever?
If so please let me know what could be the best possible solution.
Thanks & Regards
Harish Kumar MK

Hi Harish,
I have use the below code but not for percentage... I think for percentage you just have to calculate the normal percentage and replace it with a subtotal value.
This is not your complete code it will be better if you mail your complete code so that i can debug and check.
   TABLES: vbak.
TYPE-POOLS: slis.                      " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg,              " Sales organization
s_kunnr FOR vbak-kunnr,              " Sold-to party
s_vbeln FOR vbak-vbeln.              " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
    vkorg LIKE vbak-vkorg,             " Sales organization
    kunnr LIKE vbak-kunnr,             " Sold-to party
    vbeln LIKE vbak-vbeln,             " Sales document
    netwr LIKE vbak-netwr,             " Net Value of the Sales Order
    waerk LIKE vbak-waerk,             " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
*      Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
           FROM vbak
             UP TO p_max ROWS
          WHERE kunnr IN s_kunnr
            AND vbeln IN s_vbeln
            AND vkorg IN s_vkorg.
ENDFORM.                               " F_READ_DATA
*      Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
    add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname   = &1.
    ls_fieldcat-ref_tabname = 'VBAK'.
    ls_fieldcat-do_sum      = &2.
    ls_fieldcat-cfieldname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    ls_sort-up        = 'X'.
    ls_sort-subtot    = &2.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv,
    lt_sort     TYPE slis_t_sortinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    ls_layout   TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
m_sort 'VBELN' ''.                   " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      is_layout   = ls_layout
      it_fieldcat = lt_fieldcat
      it_sort     = lt_sort
    TABLES
      t_outtab    = gt_vbak.
ENDFORM.                               " F_DISPLAY_DATA
BR
Sumeet

Embedded Images Print Preview and Print Blacked Out - Adobe 9 Pro

Having an issue where images embedded into the file will view properly, but once you print or print preview the images are blacked out. This is regardless of the printer we use.
Is there a setting we are missing?

Thanks for posing this question.
Although fonts have embedding restrictions baked into the font such as preview and print, the real restrictions are to be found in a font's EULA (End User License Agreement) which may have other restrictions including payment of royalties on copies of PDF files or any other asset in which the fonts are embedded.
In the case of any and all fonts sourced from Adobe, not only do you have at least preview and print embedding privileges, but there are no restrictions or royalties required for distribution of files (i.e., PDF, EPS, eBooks, etc.) in which the Adobe fonts are embedded.
In other words, you are “good to go” with Adobe fonts. On the other hand, make no assumption about fonts sourced from other font foundries. Many do not provide such liberal terms!
- Dov

Word for mac won't show doc in print preview and prints blank page.

I have a document from layoutready.com that I have been editing and it is a .doc file originally and won't show up. I've tried saving it as .docx and still nothing. Also, when I create a new document and put in a shape or a text box, it won't show up in print preview or print either. Excel is fine. I can insert a shape onto a worksheet and previews and prints fine. I have sent a document to a friend to test and when they open it in their word (on a pc) it previews and prints fine. I called stupid %*&#@ Microsoft and they want me to sign up for $99 Office 365 to get support. Ergh. Should I try to re-install Word? Oh, and I also updated to Yosemite last night.

Then post your question on the Microsoft Mac forums since it's their software you'r having problems with. These forums are for troubleshooting Apple products
http://answers.microsoft.com/en-us/mac

Position command differ from print preview and print

hi friends
*First column box
POSITION WINDOW
POSITION XORIGIN 1 CM YORIGIN '6' CM
SIZE WIDTH '2.5' CM
BOX HEIGHT '10' CM FRAME 10 TW
*2nd column box
POSITION WINDOW
POSITION XORIGIN 1 CM YORIGIN '6' CM
SIZE WIDTH '4.6' CM
BOX HEIGHT '10' CM FRAME 10 TW
in Print Preview i am getting Line but while taking printout.. i am not getting....
what may be the issue...
Regards
Selva

The print driver is rather literal in applying your format. The second box is over-writing the first. If you reverse the order you call the boxes in they'll print okay.
*First column box
POSITION WINDOW
POSITION XORIGIN 1 CM YORIGIN '6' CM
SIZE WIDTH '4.6' CM
BOX HEIGHT '10' CM FRAME 10 TW
*2nd column box
POSITION WINDOW
POSITION XORIGIN 1 CM YORIGIN '6' CM
SIZE WIDTH '2.5' CM
BOX HEIGHT '10' CM FRAME 10 TW
Or
*Box
POSITION WINDOW
POSITION XORIGIN 1 CM YORIGIN '6' CM
SIZE WIDTH '4.6' CM
BOX HEIGHT '10' CM FRAME 10 TW
*Column divider
POSITION WINDOW
POSITION XORIGIN '3.5' CM YORIGIN '6' CM
SIZE WIDTH 0 CM
BOX HEIGHT '10' CM FRAME 10 TW

What happened to my print preview and print icons, buttons, or features. Thanks.--David

Hello,
I have just updated to the 4.0, and, now, cannot find the print or print preview button. I need to print preview. I adjust the size of my prints. Is there a better place to print from, or am I just not finding the icons. Thank you. ---David

You are wrong. FF has had a print preview button, and getting an update to FF should not remove features, it should make them easier to use. This is very troubling, the FF folks do not know what they are doing, now that they have a larger slice of the pie.

Print Preview and Printing have stopped

Hi,
I upgraded to iPhoto 08 on my iMac and everything was still printing quite happily. However after putting one of the fixpacks on it has now decided that it cannot print, sorry cannot remember which just getting round to trying to sort this out.
The print preview option just shows up blank when I preview a picture and nothing will print to the PictureMate I use. I have the latest download now applied but they have made no difference.
Everything else works fine apart from printing as far as I can see.
Thanks Bleddyn

Bleddyn:
Welcome to the Apple Discussions. Did you repair disk permissions after the last update? If not then give that a try. Then, if necessary, delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and try again.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Print preview and print button action

Hi,
This is first time when I am configuring any action in WebUi. I am trying to configure buttons on BT116H_SRVO. Clicking on "Print Preview" shows 'No manual print actions found' and click on "print' throws some exception.
I tried to check action configuration but could not find the right way to do it. Can you please guide me step-by-step as which action profile is meant for this component and how will these buttons work?
I tried action profile 'Service Order' but it seems it was not the right one.
Thanks.
Edited by: ShikhaC on Jul 7, 2009 10:49 AM

Hi,
I am trying to get the Print Preview/Print function working in the webui for "Service Requests" and have configured the following and assigned it to the transaction, but I get an error:
"Errors in smart form: An exception with the type CX_SY_DYN_CALL_PARAM_MISSING occured, but was neither handled locally, nor declared in a RAISING clause."
Can you please let me know if my configuration is correct?

Hide check box in the print preview and print of OO ALV

Hi Experts,
I am working on an OO ALV Report. I am facing an issue as,
1) I have a check box in the output of the report. If the user clicks on print or print preview the check box should not be printed.
2) When I am printign top of page in the event PRINT_TOP_OF_PAGE, when I tried to insert new line its not printing a new line.
please suggest me how to print empty lines in the print top of page event of OO ALV.
Please help me to complete these issues.
Thanks in advance.
Regards.
Ranganadh.

hi,
you can use the write statement in the print_top_of_page event of oo alv.
regards.

Excel Print Preview and printing problems

After upgrading to Leopard, I get a blank page (same when I print) and MS Excel spreadsheet. Anyone else have this issue and what is the solution? Microsoft web site indicates an issue but there updates this month didn't do anything (same results).
Thanks for any help,
Marty

Thanks for the advice here. I've had the same problem using Excel to print to a Brother MFC-440CN printer. Used the workaround described above, but also selected 'Options' in Page Setup and then selected 'Format for Brother MFC-440CN'. Changed the print resolution to 600 dpi and was then able to preview & print. However, the document had to be reformatted to print in landscape, not portrait. Glad to hear that MS are working on a fix as this could be a real pain if it continues too long!

Hi everyone. I have just started having problems with iCal. Events that I thought I had deleted are appearing on Print Preview and on print outs. Likewise Events which I have not deleted have disappeared from my calenders, but appear in print preview.

Hi everybody. I have recently started having problems with iCal (Version 2.05 (1069). Events that I thought I had deleted appear in Print Preview and Print Outs. Likewise Events that I have not deleted have disappeared from my calender (Month View) but appear in Print Preview and Print Outs. I see that there have been similar problems with Events disappearing especially in Month View. I wondered how print preview seemrd to be picking everything up deleted or not, and what the solution may be?. First time of Posting. I hope I haven't embarassed myself.

Hmmmm.
At the very least there must be a "com.apple.ical.plist"...iCal would not function without it.
Click on the Finder icon in the dock
Click on Go > Home
Double-click Library
Double-click Preferences
Look for a file called "com.apple.ical.plist" and remove it to the trash.

How to Customize Preview and Print / Sales Order Acknowledgement

Hi,
Our client needs some additional attributes on a sales order acknowledgement print ( Preview and Print ) output.
The current layout is based on ONTORDDFFN.xml and ONTORDDFN.xsd
How to customize the same to include additional attributes like Territory and Shipping instructions etc.These new fields are not there in xsd or the xml.
Appreciate your great help.
Regards,
Raju

Per Oracle you need to implement the method "getPrintExtensionXMLFragment" of PrintExtensionObject.java. Oracle has given the flexibility that getPrintExtensionXMLFragment can either return a XMLFragement or a sql query.. If the code in getPrintExtensionXMLFragment returns a string which starts with "select" Applications code will execute that query and the corresponding XML will be appended to the main XML. This needs to be written in a CustomClass and then set to the Profile " OM: Printed Document Extension Class Name".
I would like to know if somebody has extensively added columns at the different levels (header, lines, Addresses, Line Discounts, Charges) and the same additional cols. were implemented in the CustomClass. Let me know.
Regards,
Rajesh.

Why will some website articles not print preview or print more than part of the document in firefox. I sometimes have to go to IE to be able to print the entire document.

I often want to print an article from a website. Many times when I print preview, it will only show the first, second and maybe last page, but nothing inbetween. I have tried printing it anyway but nothing inbetween will print. My solution has been to go to Internet Explorer where I have then been able to print preview and print the entire article. This is annoying and takes extra time. Is there a setting that I need to make in order to eliminate the problem

Top left (Orange) Firefox button, Print, Print Preview. Does everything look correct? You may also click the icon that looks like a "DISK" to save, which allows you to save it to your computer and CTRL+P will allow you to print.

Wrong print preview and printed color from Lightroom 1.3

Similar Messages

Maybe you are looking for