Wrong production order connected to a sales order - how to change?

Hello all!
We are using ERP ECC6 - I now I'm in SCM but this has to do with PP and there was no other forum.
I have following problem:
After the MRP a production order was created for a sales order. Because of the production in another plant
the production order which was created automatically had to be technically completed and a new one
created.
If you want to check now the availability, the sales order finds nothing, because it's linked to the one,
which was technically completed. Now is the question how can I change the production order for this
sales order. (In the production order the correct sales order is connected!)
Is there a way / transaction to reconnect the wrong one?
As I found out it's connected to the field AUFNR in the table VBEP. But how can I change this
field within a transaction and not in the database?!?
Help urgently needed,
Thanks Barbara

Hi Nandha,
actually this causes the problem. We use special procurement key 80 - production in another plant.
The problem is that we don't want to produce all orders in this plant. And SAP doesn't allow us,
to use the special procurement depending on for example a special order type.
We have an order type which is used for rebuilding the completed machine, but this needs to
be done in the other plant. This are just a few orders a day, but there has to be a "clean"
solution for them.
Thanks,
Barbara

Similar Messages

Next date in sales order, how to change it? if change it does it triggres

Quick and simple question... what can change a Sales Order Next Date (field VBAK-CMNGV)?? it got changed for one of my Sales Orders according to the changes log via VA02, but no idea how... as I can not see the field via VA03.
Appreciate any help in this regard,
Next date in sales order, how to change it? if change it does it triggres credit check
Thanks
Krishna

Hi,
The next date available if you activated payment card processing
In the sales order header, this field specifies the next planned delivery date and In the delivery header, the field specifies the next planned picking or goods issue date.
This field is used in connection with next delivery/service
If you are not using payment cards in sales order then this will not impact any of your business transaction
Go to HEADER >> Tab PAYMENT CARDS
kapil

Exit/Badi in the transaction of production order create or change (CO02)

hi all,
I need an exit/Badi in the transaction of production order create or change (preferably during SAVE).
I want to change structure AFVGD-usr02,AFVGD-usr03 .
<b>PPCO0007 Exit when saving production order</b>
the exit is not applicable EXIT_SAPLCOZV_001 .

Hi
we around 200 exit for this tcode i found only three badi for this tcode.
AFABD_CHANGE          Change Relationship
CAUFVD_CHANGE        BAdI: Overall Network Scheduling with Selection Option
SIDAT_UPDATE            Change date of price simulation.
check with this goto se18 and F4 thn give the Package as CO.enter u get this three.
reward pointd if use full

IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

Production order status as "Change by external system"

Hi,
I am come across the production order status as "Change by external system"
In what condition above status is maintain in production order.
Please help me.
Sanjay

Any change in the order done in the external system other than SAP, this status is set by the System.
For example XMII.
Regards
Ratan

Std web shop behavior if a Wrong Product is input in the Sales Order page

Hi Experts,
In a B2B/BOB web shop, when a product is entered into the sales order screen manually, does the system run a standard validation as to check if the product exists in the product catalog ? Is there any documentation on this kind of standard web shop behavior ?
Any pointers on this front would be of great help. Thanks in advance.
Best Regards,
Kris.

Hello,
Where are you seeing the dump? There will not be any dump in the defaulttrace file when a wrong product is entered.
ideally on the jsp it says check product number. this is the std behavior. Below error message will be shown
At least one item is faulty; check faulty items before continuing. Go to first faulty item
Product xyz was not found.
Pradeep

Material Has wrong product hierarchy when entered in sales Order VA01

Hi,
Material -1300 - has a wrong product hierarchy.
If you search for product hierarchy via Tcode mm03 - basic data1 you will find the following hierarchy: 00P4SU000D8400600H
However if you enter an order with Tcode va01, enter Material 1300 - in the item tab Sales B - sales order picking up the wrong hierarchy 00PCSU000D8400600H. But in the sales order Product hierarchy should be 00P4SU000D8400600H.
How it could happen by picking up the worng product hierarchy. Can any one help me with regard. And how to resolve it.
Thanks in advance

Dear,
Please check in MM03 ---> Sales: Sales org 2 ---> Product Hierarchy.
If on plant level it is wrong maintain may be this type of issue generated.
Regards,
Sandip Shaktavat

Production Order - How to recieve more than one item in a single Prod .ord

Hello everyone ,
Hope and wish all is fine with u all ..
Well .. My scenario is as follows ..
While producing a particular item ( Item1) using the raw materials (say R1,R2 etc..) ..we also get another by-product ,(item2) which is also a revenue generating item.
I want to know , how do we do a receipt for this item ( item2 ) ...
I did read the forum thread posted on 12/12/07 " Receiving By Products on basis of Production order "
what I dont understand is , if we add it as a raw material in the BOM and then how or why do we issue it ..
and if we are goin to issue it ,,then when how will u update that inventory... I dont know if scenario in the thread (backflush ) is the right way to do it ..
Thanks in advance
Best Regards,
Arul...

Arul,
I beleive this is case of using the functionality of Disassembly Production order. Now your Item no. 1 is a BOM of say RM1RM2RM3. The goods receipt would be Item No.1. Now you can create a disassembly production order where in the by product would be say Item no. 2 which is as as per your information a revenue generating item hence to be marked as a sales item in the Item master.
Please check this out and let me know.
Nagesh.

Availability Check during Production Order (controlling side) change

Dear Gurus,
we run our COMAC run over all production order, but due the fact some controlling user is performing at the same time some settlement activity the job scheduled goes in DUMP and block all the chain of ATP scheduled for all Work Center, instead of provide an easy message log that advice the order processed bt the user has not taken into account?
there is something that is wrongly set up?
Regards.
Gianluca

Dear,
It depends on when your background job started..if the background job is started before CO settlement, then system will give error in settlement. If the ATP checking background job has started after CO people started settlement, then you will have this problem.
Hence to resolve the problem two possible solutions.
1. You send a message through basis that Production order job will be starting from this time to this time and hence dodnot run settlement...hence system will give the message to all users.
2. Schedule the activity in the night when no one uses the system.
Pl come back if required.

Open Production Orders, how to properly close

Hi Gurus,
How do you close your open production orders in the past, say 3 years ago. These orders have no effect anymore in terms of stock/cost. Whats the proper way of closing them?
Im trying to do a TECO, then CLOSE the order but system is not letting me so because I have open (undelivered) qty for that order. How do i close them?
Thanks guys,

Dear,
1. Complete the order technically by using Tcode : CO02--> Functions ( Menu)---> Restrict Processing -
> Technically Complete. You can carry out TECO for multiple Orders in Tcode : COHV (Mass Processing).
2.Now Calculate Overheads using Tcode : KGI2 - Individual Processing
CO43 - Collective Processing
3.Calculate WIP using Tcode : KKAX - Individual Processing
KKAO - Collective Processing
4.Calculate Variance by using Tcode : KKS2 - Individual Processing
KKS1 - Collective Processing
5.Finally do the settlement of Order in Tcode : KO88 - Individual Processing
CO88 - Collective Processing
Hope this helps.
Regards,
R.Brahmankar

Production order report for changes in component & quantity

Dear all Hi,
Is there any standard report/functionality in SAP PP to see changes made to the production order once it is created. This is the client's requirement, changes that are made to components, quantities, operations & dates of a production order should be displayed in a report. Please do guide me, thanks in advance.

Hi,
One Option could be Order Change Management (OCM).
The second could be , use the modification which is provide by SAP in SAP note 390635.
(This OSS Note was suggested by Sabine Trosse number of times in the Forum, there were number of success feedbacks after using this.)
Hope this helps..
Regards,
Siva

Production Order header Qty change without changing the line qty

Dear Experts,
This is one of the requirement from my client. He has to change header planned qty without changing line planned qty in the production order. They are doing this to avoid the wip variance account posting. Can we achieve this through SDK? If so how?
Regards,
Gokul K.

Hi Gokul,
You can over write the planned quantity by the base quantity in each line.
Here is my sample fro you:
If (Not pVal.Before_Action) And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_VALIDATE) And (pVal.ItemChanged) And (pVal.FormTypeEx = "65211") And (pVal.ItemUID = "12") Then
With CType(SBO_Application.Forms.Item(FormUID).Items.Item("37").Specific, SAPbouiCOM.Matrix)
For ii As Integer = 1 To .RowCount - 1
.Columns.Item("14").Cells.Item(ii).Specific.value = .Columns.Item("2").Cells.Item(ii).Specific.value
Next
End With
End If
regards,
Csaba

Production order - How to understand if there's a modification ?

Hello,
If a production order is modified ( transaction CO02 ), I have to call some Zprogram when the order is saved .
There's some exits, or else (It's enough just a flag ( X or space ) ) to check it ?? I mean to check if one or some variables
inside at order are modified.
Thank you,
Roberto.

Hello ,
tks for reply.
I don't need to send an email. I need just to run a zprogram.
There's something more light ? for exemple if you know some exit....
tks.

Excise invoice price is updating with sales order how to change

Dear All,
I am following TAXINN tax procedure.
when any misstake happens in price i have to cancell all the process. from excise invoice to sales document.
even if i am updating the billing invoice and again creating the excise invoice its taking the price from sales order price.
How can i update the price in excise invoice with billing document not with sales document.
Thanks with Regards
Subrat

Actually when we are canceling the excise invoice and updating the billing document with new price and again creating the excise invoice its taking the old price not the updated price.
this is what the problem is .
how system will concider the updated price for excise invoice.
Thanks with Reagrds
Subrat

Wrong product on your the download page- so how do I get CS6 web design for Apple Mac

I bought the mac version - I get a windows version. No online support. No answer to the telephone. All supposed avenues to customer support, lead to a dead end.

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

Wrong production order connected to a sales order - how to change?

Similar Messages

Maybe you are looking for