Wrong result in Web Intelligence Report

Post Author: shriram81
CA Forum: WebIntelligence Reporting
When I run a query for web inteeligence documnet I receive a wrong result. But when I run the same SQL query in SQL analyzer of MS SQL server I get correct result.
e.g. I get the same value of measure object against different dimension in web inteeligence report but I get correct values of measure when I run the query in query analyzer on SQl server
Pl guide me to get correct result in Webi

Post Author: GregPye
CA Forum: WebIntelligence Reporting
Are you copying and pasting the query from WebI into SQL Server? Seems a bit odd, as the SQL should be sent to SQL Server to run...
I would check the report level settings, such as filters, or what have you... also check that there aren't more than one SQL query being run in WebI that you haven't noticed...
Cheers

Similar Messages

Date data from Web Intelligence Report not equal to Date from Source

Hi,
I am creating a Web intelligence report based on a BEx query. I have a field called 'Date' that I am bringing over from the BEx query. It has a format of MM/DD/YYYY. When I view the 'Date' in Web Intelligence, it is displaying as 1/1/70. For example, in the BEx Query, 'Date' = 11/01/2011. In Crystal Reports, it is showing up as 1/1/70 as the only date. The source field contains more than 1 date. I'm not sure what's going on. I am using the 14.0.0 (2010) version of the Web Intelligence through the BusinessObject Launch Pad.
Please help!
-Janice

Hi
The patches for SAP BusinessObjects BI4.0 are accumulative. This means you can download the latest patch (for the Support Package that you have installed) and it will have all the patch fixes
It looks like older patches are being removed from the sites & only the most recent patch or patches are available since they are accumulative
I believe Patch 2.15 should now be available, but anything later than Patch 2.6 should help you in this instance
I hope this helps
regards...ian

BI Launch Pad - Error opening Web Intelligence Report (Error: INF)

Hi:
We're working with 4.1 Support Pack 3 Patch 1
Version: 14.1.3.1300
We migrated a Webi report from development environment to testing and it was working fine.
After making some minor changes on the Web Intelligence report, we migrated again, but now when we open the Web Intelligence report we get the following error:
Faltal Exception occured. The cause was: com.businessobjects.corba.generic.container.proxy.internal.DependencyFailoverCallbackImpl$FailoverFatalException:
Prepare failover failed (Error: INF)
Any ideas?
Thanks in advance!
Kind regards,
Florencia

Hi Florencia,
It seems like report is corrupted some how.
To check report is existing in filestore or not , go to report in Launchpad->Properties->check File name , there should be frs path assigned to it.If not it is corrupted.
Ex : File Name:frs://Input/a_067/064/004/278595/auytslwhrgrdneqcvzbefs0-guid[atli.nsurgzit4q8pfgonmi].wid
If it corrupted , check in myfavourites : ~webintelligence folder , there you can find last auto saved instance.If not we may need to create new report.

Gauges/Dials in BO 4.0 Web Intelligence Reports

Hi All,
We are currently working on BO 4.0 and want to add Gauge in web intelligence report. As we know that, Gauge is not existing in the list of components provided by BO webI so we need to do some work around or even for the single value display which other component we can use in WebI.
Can anyone suggest how we can achieve the same?
Regards,
Tina Ailani
Edited by: Ailani Tina on Aug 25, 2011 6:18 AM

Personally, I'd do something like this:
Open Microsoft PowerPoint, use the drawing tools to create a thing that looks like a dial (with a needle).
Copy and paste it 8 times.
Move the needle on each so that's it in a different position.
Right click the shapes and click "Save as Image".
In Webi, add a blank cell where you want the picture to be.
Click the alerters icon in the toolbar.
Add some rule, for your measure (whatever should drive the needle of the chart).
Click the format button, and on this page, select an image for that sub-alerter.
I think 8 is the limit. You can always apply to alerters (each with 8 sub-alerters) to the same cell.

How To Clear The Web Intelligence Report Cache in BO 4.0 Linux

Hi Experts,
I have followed the SAP Note 1207029 to Clear The Web Intelligence Report Cache in BO 4.0 Linux, but in the note they have mentioned the path of BO XI 3.1 that doesn't exist in BO 4.0.
Given Path in the note: <installation directory>/useraccount/xir2/bobje/data/computername_50064/storage/docs
In BO 4.0: Inside Installation directory theres no useraccount directory.
Please anybody tell me the path of BO 4.0 in the linux server to clear the WEBI report cache.
Thanks in Advance,
Gandhi

This would be your path
<install_dir>/bobje/data/<cms_port/storage//docs

Scheduling Error For Web Intelligence Reports

Dear Experts,
    I want schedule BO XI R3.1 SP 3 Web Intelligence reports.
    For this i want to give Adaptive job server :destination details.
    Can you suggest what i need to enter for below details?
   1)Host    ?
   2)Port?
   3)Domain Name?
   For Host can i give BO CMC name or can i give BO Server IP Address or suggest me right one?
   For Port can i give CCM -->Adaptive job server PID value or CMS Port or SIA Port or Suggest me right one?
   For Domain name what i need to enter?
   The errors i am getting as shown below while scheduling with different ways as i mentioned above..
Error Message:     server error. []: [CrystalEnterprise.Smtp]
Remote Instance in Federated Cluster:     No
   Error Message:     server error. [Error initializing SMTP server. Return code: [TCP send failed.]. Reason:                               [Port address].] [CrystalEnterprise.Smtp]
Reply will be appreciated
Regards,
Venkat.

Thanks a lot Konovolav,
Can you tell how can i find SMPT server details to fill host, port and domain name for email scheduling?
I can able to connect to Internet in my BO server.
Can you tell me the path to find above details?

WIH 00013 time out error while viewing a BO Web intelligence report

Hi,
I have a BO web intelligence report. While viewing the report i get WIH 00013 time out error. I have another report with everything same as this one except for one filter condition. That is working fine but former is giving me an error.
I tried changing the timeout values to 120 minutes from 90 minutes in connection server setting but didn't work.
Also when i run the same report by scheduling it in CMC and format as PDF, then it works fine. This error only comes when i try to view the report directly from infoview.
Please let me know if there is any other way to resolve.
Thanks!
Edited by: Satya Suma on Mar 9, 2011 1:31 PM
Edited by: Satya Suma on Mar 9, 2011 2:00 PM

Hi Suma,
These links may be helpful to you:
WIH00013 - Invalid Session
WIH 00013: Invalid session
All the Best,
Madhu....

Web Intelligence Report Server - Error: Failed to run rexec. Error number

Hello,
I post a message in this forum :
"When i want to start "Web Intelligence Report Server" with CMC, i've got this error :
Web Intelligence Report Server: Echec du démarrage/de l'arrêt du service sur l'ordinateur distant : Error: Failed to run rexec. Error number: %12.
Any idea ?"
I've do this command :
bouser@v-bo-1 bobje$ ./ccm.sh -restart ras
bouser@v-bo-1 bobje$
but i have always the same error "Error: Failed to run rexec. Error number: %12".
Thanks

Please try to avoid posting duplicate forum posts.
This command :
bouser@v-bo-1 bobje$ ./ccm.sh -restart ras
Restarts RAS server and has nothing to so with WebIntelligence.
To be able to Start/Stop servers from CMC, you have to have rexec running on your Unix box.
Google rexec for more information on what it does and ask your Unix admin to enable it.

BLOB data in Web Intelligence report

Hello,
I am doing research, how to display documents which are
stored in BLOB field in a database.
I would like to create list of the document names with Web Intelligence
report and make a link to document. Link to the document should open the
document, the document can have different MIME types (doc, pdf, jpg,
tiff, ....).
Could you please help me to find right solution for this?
Thanks in advance.
Best Regards,
Slavisa

hi,
Please refer to below link.
BO XI 3.1 and BLOB
Regards,
Vamsee

How to add image in web intelligence report?

Hi All,
I tried to add an image into web intelligence report by using the background image function available in the appearance settings. But when I tried to click on the button with ellipse, it does not show up a dialog box.
Do I miss out anything? Help is really needed.
Thanks
David Yee

Hi David,
You can try these steps to see if the Background image dialog box is appearing for a Free Standing Cell.
1. In Webi Java Report Panel, select Templates-> Free Standing Cells -> Formula and Text Cells-> Blank Cell
2. Click and drag the cell in the report.
3. Select the cell Properties
4. Under Text Format, click on the button in the Background Image property.
5. You can select the u201CImage from URLu201D or u201CImage from fileu201D.
6. If you are selecting u201CImage from URLu201D, change the u201CRead cell content asu201D property to u201CImage URLu201D under Display section in the Properties Window.
Hope this helps.

Date Format Error in Web intelligence Report

I created Web intelligence report using the BEx query.
The problem is when i drop the date field in webi report it gives me only one date that is (01/01/1970)
but the year and month field that are calculated on BEx query is coming in correct way.
So any one have solution to this Bug.
I m currently on :SAP BO 4.0 SP 2
SAP BI 7.0 EPH 2 on NW 7.02 Instance.

HI,
Not getting whatever you are trying check...please give few more example where you are facing error.
Regards,
satya.

Adding a image in Web Intelligence Report

Post Author: palani007
CA Forum: Integrated Solutions
hi,
I am new to this forum, i am not sure whether i have asked the question to the right group our not.
Here is my question,
I have a situation where in i have to add a logo for each company based on the selection of the company name.
The things which I have done:
For that i have stored all the company logo as bmp file in the server. I have created an object in the universe to fetch that information(url) from the table but while preparing the Web intelligence report, i am getting the logo as a url. Even after changing the format to "image url"
could anyone give me a solution for this?
Ur Help is highly appreciated.
Thnx

Post Author: amr_foci
CA Forum: Integrated Solutions
to add an image to the Webi
1) add your images in this folder" C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Images" in a jpg format lets say " myimage.jpg"
2) add a free standing cell to the web report.
3) in the properties of this cell , go to background image , click custom , write the name of the image "myimgae.jpg" by default it will wirte to you "boimg://myimage.jpg" and it will show you your image in the box
4) configure the properties of the image like, position and border, etc.
good luck

Freeze header row panes in cross tab WEB Intelligence report

how do i freeze the crosstab header row in the WEB INTELLIGENCE report so that the header remains stationary /freezes at the top and the data can be independently scrolled.(similar to freeze panes in MS Excel).
please provide me with a Quick Solution since i am stuck on this task for quiet some time.

Hi,
Prepare to be stuck no longer!
Sorry, this functionality is not available in webi..
This suggestion has been made multiple times in the Ideas Place : https://cw.sdn.sap.com/cw/community/ideas/businessanalytics/sbowebi
for example: https://cw.sdn.sap.com/cw/ideas/1664
please Vote it up. actually, i see it is in status "under review" so that is positive. No commitments to timeline for inclusion, so don't hold your breath!
Regards,
H

Add Comment to Xcelsius Dashboard and Webi Intelligence Report

I created a Web Intelligence report based on that report using Live Office I am creating Dashboards in Xcelsius.
The Business Request is that each day when the report is refreshed/scheduled at 2:00 am, next morning the BA looks at the report checks the data and add some comments.
These comments should be availble/ displayed on the dashboard.
Where should the BA add the comments and how can I bring it in report and dashboard
I have tried few things nothng is working. any suggestions .
THANK YOU

I forgot to mention 1 important thing.
If the user wants to run a dashboard or report (WITH HISTORICAL DATE) the comments should be displayed for that particular historical date.

Export a Web Intelligence Report using its SDK

Is it possible to Export a Web Intelligence Report directly without going to BO Link with the help of Business Object SDK? My requirement is to export the report from java application.
Edited by: Monika John on May 1, 2010 10:25 PM

Hi Monika -
In the future you'll want to post questions like this one in the Business Objects Java SDK forum found at:
Java SDK Forum: Java SDK Application Development
Your requirements is a common one. More resources, sample code and snippets for Report Engine / Export workflows can be found at:
http://wiki.sdn.sap.com/wiki/display/BOBJ/JavaReportEngineSDKSamples
Good Luck

Wrong result in Web Intelligence Report

Similar Messages

Maybe you are looking for