Wrong sap_ep_baseurl when calling a bsp application via appintegrator iview

Hi all,
we have integrated an BSP application via an appintegrator iview. Everything works fine except that the sap_ep_baseurl parameter in the BSP application URL is incorrect. It contains the port number 50000 which should not be included in the url as we are using a proxy in front of the portal.
The parameter looks like this
...&sap_ep_baseurl=http%3A%2F%2F<proxy dns name>%3A50000%2Firj%2Fportal
but it should only contain the following value
...&sap_ep_baseurl=http%3A%2F%2F<proxy dns name>%2Firj%2Fportal
Does anyone know out of which configuration the port is taken?
Thanks in advance. Regards,
Constance

Hello Constance,
why did to integrate the BSP application via an appintegrator iview? You can use a BSP IView.
Regards
Gregor

Similar Messages

Calling a BSP application from universal worklist

Hi All,
I want to call a BSP application, when a workitem is clicked in Universal Worklist(Enterprise Portal)
I have configured the Task Type in SWFVISU transaction, with Visualization type BSP standard & in visualization parameter i entered,
APPLICATION = zgelrbsp0001
PAGE_ID = leso.htm
When I click on the workitem my test BSP application is called. Buy my requirement is not call a static dynamic application, when the workflow is called the workflow container has a URL
http://dev01.abc.gov.sg:8000/sap/bc/bsp/sap/hap_document/document_port_wf.htm/
this URL will change. But I don't know how to configure to call the URL in container. Please let me know how to achieve this.
Regards,
H.K.Hayath Basha.

Hi Raja,
Thanks for the reply.
I said wrongly in my earlier mai, my URL is static, but the parameter appl_id will have different value.
http://dev01.abc.gov.sg:8000/sap/bc/bsp/sap/hap_document/document_port_wf.htm/?appl_id=1234
What I have done is similar to the one which you have said, copied the standard BSP and modified, I pass WORKITEM ID to the BSP application, BSP application reads the workflow container for appl_id and sets that value to the BSP application attribute.
There should be a better way to do this.
Regards,
H.K.Hayath Basha.

How to call a BSP Application inside Webdynpro for ABAP

Is there any way to call a BSP application inside the webdynpro ABAP application..
The Input screen will be the BSP page and when the user click the action it have to trigger some data in BSP and in turn it have to collaborate the manipulated data in webdynpro and shows the output in webdynpro or in BSP..

pls refer to http://help.sap.com/saphelp_nw70/helpdata/EN/30/1b62799d786445a72ad85acb4fd55b/content.htm
and check if it helps u

Calling a BSP application's View directly

Hello,
I am using BAB to simplify 'Maintain Opportunity' BSP. After the simplification, when calling the BSP in portal, I could not call the view 'ACT_LEAN' directly. I can see only the standard BSP in the portal and not the changed one. Following are the parameters I am passing to the portal:
BSP application: CRM_BSP_FRAME
Start Page: entrypoint.do
application parameters: appl=CRMD_BUS2000111&blview=ACT_LEAN&sap-syscmd=nocookie
I have also activated the whole tree where all these bsps are in the xn 'sicf'
Any advice on how to call the view directly is appreciated.
Regards
- Arun

Hi ,
what you need to do is
1) for the "Send" button attach a java script.
<htmlb:button id="myButton" text="Submit ...." onClick="sendRequestWrapper()"/>
this javascript should take the inputfrom the field,
then in the javascript create the URL.
function sendReqeustWrapper(){
sendRequest(InputField);
function sendRequest(InputField)
var URL;
URL = window.location.protocol + "//" ;
URL += window.location.host ;
<b>Note: its only Example link,</b>
URL += "/sap/bc/bsp/sap/<BSPApplication>/controller.do";
URL +="?InputFieldName=";
URL +=InputFieldValue;
<b>then use</b>
Your URL will look like:
http://ld0507.wdf.sap.corp:50007/sap/bc/bsp/sap/<bsp appl>/controller.do?InputFieldName=XXXXX
window.open(URL,"_self","");
so once this URL is triggered you need to goto the respective controller and handle the input. You can see the reply from Mr. Akshaya Rao .
regards,
Vijaya Kumar M.
Message was edited by: Vijaya Kumar

Calling a BSP application on a Web-Dynpro screen

Hi all,
We have a requirement as below:
In the SAP Standard Web-Dynpro screen we have a Tab-strip control, where there are 2 tabs.
We need to enhance the tab-strip control and add a new tab. On the same tab we need to call a BSP application.
It meas when we select the tab we should be able to see a specific BSP Application there.
How can this be made possible?
One way that I can think of is by creating the Service calls... However, I am not sure how can the service call can be created and used to call a BSP App to be displayed on the screen.
Waiting for your replies.
Regards,
Kunjal Patel

Hi Thomas,
Thanks for the reply. It was quite helpful in analyzing the available options for the development.
Now, with the further analysis from your inputs, following are the findings:
1. BSP is a Stateful BSP.
2. Yes, We are using this web-dynpro in the portal. How can we go about with the alternative way suggested by you about the iView? As i have very limited knowledge about the Portal hence a little more help from you will be helpful.
Is it like we can provide a button on the screen and then when a user clicks the button the result is a new window of the browser with the given portal link?
Please suggest.
Regards,
Kunjal Patel

Adding a tab on opportunities and call custom bsp application

Hi All,
         I want to add a tab "Visit Reports" in accounts,opportunities,contacts applications and on clicking this tab it should call a bsp application.I followed the
steps given in the following blog
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1646. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
1.This blog gives steps to create a tab and call bsp in accounts application,I could create a tab but it is not calling any bsp application?
2.When I followed the same steps to create a tab in opportunities ,it dint work.In the application set of opportunities what should be given in "parent structure"?For accounts I have given BUP_MAIN.
3.Do we have to write anything in the process event,to call bsp?If so can u give me the steps.
                    Please suggest,it's urgent.
Regards,
Ruby Chacko.

Hi Raj,
          I have done customisisation of application set also,but it still doesnt work.
I have given application set-comp_bupa ,structure name,mac,structure type-dependent structure,parent type-bup_main.My read method is as follows:
method if_crm_bsp_model_access_il~read.
    data :
      lv_account type bu_partner,
      lv_submi   type crmt_object_id,
      lv_guid    type crmt_object_guid,
      ls_screen_structure type zcrmt_bsp_acc_aett,
      lt_screen_structure type table of zcrmt_bsp_acc_aett.
     CALL METHOD CL_BSP_RUNTIME=>IF_BSP_RUNTIME~CONSTRUCT_BSP_URL
EXPORTING
IN_APPLICATION = 'z_timerecord'
IN_PAGE = 'input.htm'
IMPORTING
OUT_ABS_URL = ls_screen_structure-url .
    case iv_screen_structure_name.
      when 'ZCRMT_BSP_ACC_AETT'.
        read table it_object_key index 1 into lv_account.
        concatenate
          ls_screen_structure-url 'P_KUNNR%3d' lv_account
          ';P_AUF%3d;P_ANG%3dX'
         into ls_screen_structure-url.
    endcase.
    insert ls_screen_structure into table lt_screen_structure.
    et_screen_structure = lt_screen_structure.
endmethod.
If there is any mistake in the read method please reply.I have followed the same steps ,given in that blog. ( Modify method is empty implemented.)
Please give me guidance.
Best Regards,
Ruby.

Calling a BSP application in ABAP webdynpro

Hi Friends,
Is there any chance that i can call a BSP application from WEBDYNPRO.
regards
Nalinikanth.

Hi Yashpal/ Pankaj,
I have one question regarding this.
The usage of the UI element link "link to URL" is pretty much understandable to call a stanalone application.
Whereas the usage of suspend and resume plugs, how does it work for BSP applications? For two WD components we can connect the plugs and it works.
As I do not know about BSP, does it have in/out plugs like WD components?
If so how to create the navigation link for this.
Please explain.
Sankar.

Calling a BSP application from another

Hello,
    I have not a lot experince in bsp's programming.
    I am trying to call a bsp applicattion from another one. Do you know how can I do it?.
    Thanks in advance. Javier.

hi Javier,
For questions on BSP programming,you should post your questions on the bSP forum.
For your question,it depends on how you want to call your BSP application.
Do you want to navigate from one BSP page to other or you want some link which leads to the other BSP application.?
You can find sufficient help on the help.sap.com
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm</a>
For more details, you can search SDN itself.
IF you have more queries,your'e welcome.
Regards,
Siddhartha

How to call custom BSP application (copied from standard)

Hi,
I came across 1 interesting link in SDN.
[Enhancement procedure of BSP application HRRCF_RECRUITER in eRecruitment]
My requirement is also similar.
I need to copy the HRRCF_TRM_SRCH application.
I know how to make the changes for the logic (like copying the standard controller & iterator class etc.)
But I donu2019t know how to call the custom BSP application.
One requirement is, I need to call a BSP application, in which there are only UI(user interface/screen) changes .
That is, if there are only changes made to hitlist_cand.bsp page . And no changes made to hitlist_cand.do page.
Eg: Removing one button from screen.
Second requirement is, I need to call a BSP application in which there are logic changes also.
(I know how to change the standard controller class to custom class)
Eg: Changing logic of button.
We tried renaming the application name from standard to custom one (with Namespace=SAP itself, though it gave a warning) in the table T77RCF_LOG_APPL .
Then we used this name to configure the start page link. But still the execution control is going to standard page & not to custom BSP application.
How will I know which BSP application(Appl A), is calling the BSP application (Appl B) in which I want to make changes ?
The starting application is HRRCF_START_INT.
Would really appreciate solutions posted.
Thanks,
Nisha Vengal.

Hi Nisha,
I think you have an issue to call custom BSP.
- Ignore the warning message (in the table T77RCF_LOG_APPL) as it is just a warning message. I did not touch start page link at all.
- Additionally you need to make (I had to made) an entry in table u2018V77RCF_SMG_NAVIu2019.
Let me know, if you need anything else.
...Naddy

Error when calling up the application function for hierarchies

Hello,
if I try to load a material class hierarchy and the loading is failing directly in source system with error message "Error when calling up the application function for hierarchies". Did anybody have this problem? I could not find anything iside the forums.
Thanks for your help!
Regards,
Christian

Hi,
I have the same problem. Do someone know the solution? What is the problem?
Thanks,
Ángel.

What i want is when i run bsp application automatically is should open with

Hi friends,
In BSP when we run a application the browser will open.
When it open if i want to full screen i have to press F11.
What i want is when i run bsp application automatically is should open with fullscreen -F11.
How to code this in BSP.
Pls suggest.

Not exactly full screen but resizing to maximum:
<S CRIPT language=JavaScript1.2>

</S CRIPT>
In the code remove the space between s and cript

Eliminating logon when calling R/3 transaction via BSP

Is it possible to eliminate logon when calling SAP R/3 tcode via BSP. I run
http://<FQDN>:<port>/sap/bc/gui/sap/its/webgui/!?client=%3c100%3e&transaction=SE80
but have to login each time. I could embed my username/pwd on the url string, but is there another method?
I also thought about using the URL iView parameters (Mapped User, Mapped Password) within Property Editor, but content admins will be able to see username and password when opening the iview. Any suggestions?
Regards,
James

I figured this one out.
Regards,
James

EREC-BSP-How to call a bsp application from another bsp application

Hi Experts,
In E-Rec one of my bsp application zapp_e_ext calling another standard bsp application hrrcf_searchhlp when user click on search help button.
i made a zcopy (zhrrcf_serchhlp) of std application hrrcf_searchhlp,and did some changes,
now the problem is how to replace the std application with zapplication so that zapplication should be called in place of std application when user click on search button.
Cheers,
Amod

try exec()ing the cad program with the name of the file as a command line parameter...
Runtime.getRuntime().exec("CADProg.exe Test.prt");
i have no clue if this will work but it seems like it's worth a try.

Environment.Exit hangs when called from an application domain exception handler

I've implemented a handler for exceptions not thrown in the main GUI thread of my C# WinForms application, as follows:
AppDomain.CurrentDomain.UnhandledException += OnUnhandledExceptionThrown;
This handler is called from a background thread. The last statement in this handler is a call to
Environment.Exit with the application exit code. However, the application hangs in this call. From within Visual Studio, it hangs and I'm unable to break the application; I have to use Task Manager to terminate Visual Studio. Environment.Exit
works fine when called from the unhandled exception handler for the GUI thread. Is there a better way to terminate the application in the context of an unhandled exception thrown by a background thread?

Are you just trying to avoid a crash? Environment.Exit can cause deadlocking if exiting in the wrong kind of scenario; if you're just trying to avoid a crash, use
GetCurrentProcess with
TerminateProcess to terminate your own process. It skips the notification phases that Environment.Exit uses which prevents the common deadlock scenarios.
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

Calling custom BSP application from CRM PCUI

Hi,
We are using the CRM PCUI for channel partner management. Since PCUI framework has some limitations as to how the data is formatted in the layout such as no multiple value selection ( Being a generic framework using blueprint tables we have to use the predefined layout settings and positions) we want to call a standalone BSP application to maintain some of the data such as marketing attributes. We want to do this by providing a link to the standalone BSP application where the data can be maintained. Since we will be calling this application in the create mode of a new BP, is it possible to integrate the whole application as one logical unit ? I mean we want to commit the marketing attributes within the same 'save' methods of the pcui framework. Is this possible to do ? Any ideas or input is greatly appreciated.
Thanks.

Hi,
we've already done a rework of the marketing attributes screen by using the technique I've described in my Weblog <a href="/people/gregor.wolf3/blog/2005/05/27/use-crm-pcui-html-viewer-to-call-a-custom-url">Use CRM PCUI HTML viewer to call a custom URL</a>. But it has one drawback: You can't use the Save button of the PC-UI applicaiton. You have to provide your own. But the usability enhanchement is rearly great.
Regards
Gregor

Wrong sap_ep_baseurl when calling a bsp application via appintegrator iview

Similar Messages

Maybe you are looking for