[Wrong Section Post] Solved

SORRY, WRONG SECTION... IM REPOSTING THIS IN THE RIGHT PLACE
Hi there,
I am using Oracle Reports 6i and Oracle Forms 6i
I'm experiencing an issue when calling a report from a oracle form.
After log in and run a form I trigger the run_product(); function, it will open the report window and prompt the user connect window every time.
This was not happening before, but I did reinstalled and reconfigured the oracle Database which is an Oracle 10g, after that this issue rised up.
Probably I messed up something in the instalation but I have no clue what was that.
I'll appreciate a lot your help.
- Adrian Lozano
Edited by: zxsplinter on Mar 4, 2010 8:41 AM

Wrong section post

Similar Messages

Deleted, posted in wrong section.

Deleted, posted in wrong section.
Message was edited by: Jeff Vader

ALSO, cleaning....
http://www.maximumpc.com/files/u69/MSI_GX740.jpg
the area on the bottom surrounding the mouse sensor, anyone find a good way of cleaning that? everything i've tried leaves marks or is ineffective....
this was the result of my attempt to clean it looked worse
even bought a "micro-fiber" lens cleaning sheet...bought a few actually--different brands. didn't really help.

Posted In Wrong Section, Moving

I accedentily posted this in the wrong section, and am now moving it to the right one, sorry about the post, but i see no way to delete it completly.

Hi,
I don't know exactly what you've done or where you've been in the process, here are a couple of items that might help. If not, and you have any more specifics of what's been happening, post back to see if someone can help.
Here is an HP document about Updating Windows 8 to 8.1 to check to make sure you're not missing anything when you're updating.
And here is a set of instructions from Microsoft to Update to Windows 8.1 from Windows 8.
If you still have issues, perhaps the exact error message would help.
Thanks,
GeorgeFN
I work on behalf of HP.

Deleted I posted in the wrong section ^^

Whoops posted in the wrong section
Message was edited by:
Dream-Scourge

ALSO, cleaning....
http://www.maximumpc.com/files/u69/MSI_GX740.jpg
the area on the bottom surrounding the mouse sensor, anyone find a good way of cleaning that? everything i've tried leaves marks or is ineffective....
this was the result of my attempt to clean it looked worse
even bought a "micro-fiber" lens cleaning sheet...bought a few actually--different brands. didn't really help.

Some info ( hope i'm not in wrong section :$

Hello
Well uhm I was hoping if some of you could tell me if the next build would work
or having cpu problems or anything or bsods or just things that are know to this mobo
My build is the following
Mobo : Msi K9N SLI 2F ( But I think this is nvidia based mobo) http://www.codima.be/product/1257/msi_k9n_sli_2f_am2nforce_570pcieddr2sata_rglan71.aspx
PCU : AMD athlon 64 x2 4200+
GFX card : Asus Nvidia 8400 GS 256
or Msi Ati RX2400PRO 256 Mb
PSU : 400 watt
The other stuff I have ,So I would love for some info ,like well its compatible and shouldn't give any probs
or well there are some problems with that kind of setup
Thanks alot in advance =)
I was looking on the site at the cpu's and I think its tested on this amd 64x2 but just checking for safe ^^
And sorry if I posted this in wrong section

Going by watt rating is bad thing to do as cheaper PSUs give high watt ratings yet don't provide the amps needed on the +12 volt rail. Look for a PSU in the 450 watt range that has a single +12V rail that has around 30A for +12V. Try to avoide multi rail PSU. You will be looking at something in $80-$90 US price range for a good one.
Yes you are correct that is nvidea chipset on that MB.

PO process by interface was wrongly GR posted.automatic the GR

Hi Gurus,
PO process by interface was wrongly GR posted.automatic the GR posting didn't registered the correct amount of the PO for the line item ($1746) but for less ($1) is posted.automatic GR posted with a wrong/different amount from line item.
We are canceled GR and post it again looking for system to recognize it correctly but this was useless.after GR posted for I$ DOLLAR,we are posted IR doc also.Im still pending for analysis of the reason why this GR was wrongly posted,your instructions and explanation of situation appreaciated.please help me.
Regards
SAP MM

Hi,
Check the tolerance limits defined in IMG under
Materials Management -> Inventory Management and Physical Inventory -> Goods Receipt -> Tolerance Limits
Also, check "over delivery" and "under delivery" tolerances defined in Material Master under "Purchasing" view.
Also check in IMG under
SAP Netweaver -> General Settings -> Currencies -> Define rounding rules for currencies
For the company code/currency combination for which payments are to be made not in the smallest denomination, but in a multiple of it, enter the currency unit (rounding unit) to which amounts are to be rounded.
This ensures that the amounts in this currency are always rounded to this unit (providing the amounts you enter manually are also rounded in line with your entry). The payment program evaluates your entries to determine the cash discount and rounds off the amount accordingly.
Regards,
Srilatha.

Right Category, wrong section !

I have just published my 'First' ever Podcast ( just a tester ) and noticed that it is the Correct Category but in the wrong Section. How do I change this ?
Any ideas, many thanks
Steve

when you send it to itunes, it should ask you for both. it means you entered it incorrectly. try re-sending!
max

What is a .chm file? Sorry if in wrong section. Dont know where to ask?!!?

Hi guys,
I was told to open a .chm file but my mac asks me what program to use. Ive never heard of a .chm file before.
What is it?
What program should I use?
This may be the wrong section to ask so please tell me where to ask if you know.
Thanks,
Jonathan

Hi Jonathan
That's a kind of Help/Documentation file for Windows; you can read it with your Mac using Chmox.
Matt

Srry posted in wrong section

Sorry wrong place to post :(
Edited by: TDEsws on Nov 2, 2008 2:35 PM

Hi,
I don't know exactly what you've done or where you've been in the process, here are a couple of items that might help. If not, and you have any more specifics of what's been happening, post back to see if someone can help.
Here is an HP document about Updating Windows 8 to 8.1 to check to make sure you're not missing anything when you're updating.
And here is a set of instructions from Microsoft to Update to Windows 8.1 from Windows 8.
If you still have issues, perhaps the exact error message would help.
Thanks,
GeorgeFN
I work on behalf of HP.

Please ignore, posted in wrong section and can't delete.

Intended for Windows Desktop section. Skype crashes upon login and I get a "Skype has stopped working." message. It started after my Win7 computer got a BSOD while skyping someone. First time I uninstalled Skype and reinstalled which got it working. The second time trying to open it though the error came back and uninstalling/reinstalling is not working. I have uninstalled, deleted the Skype appdata folder, removed all of the Skype registry keys, restarted, then reinstalled only to get the same error. Below is the error message I keep getting in the Event Viewer. Have spent several hours researching this and trying to fix it with no success. Faulting application name: Skype.exe, version: 7.7.0.102, time stamp: 0x55aa57aa
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18847, time stamp: 0x554d7bd0
Exception code: 0xe06d7363
Fault offset: 0x0000c42d
Faulting process id: 0x19ac
Faulting application start time: 0x01d0c7dfab5c7fe1
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: f6f09268-33d2-11e5-bb9c-bc5ff4c7d140

When you open Maps touch the search bar and on the resulting screen you'll see Favorites. Touch Favorites and in that resulting screen you'll see a Clear button at the top. Then click Done to return to the map.

Sorry posted wrong section

x

As far as I can understand the situation, the answer should be 'yes': the array is protected until you leave the critical section.
But could I suggest an alternative, perhaps simpler approach?
If you configure a thread safe queue of 44100 elements which discards old elements, with T1 that fills it on top, T2 can freely read from the queue without disturbing T1, having available the most recent set of data in any moment.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Sorry if wrong section to post - Stolen Ipad

Hello, it doesn't seem like there is a lot of info out from Apple regarding a stolen iPAD,
I been to police for report, insurance not helpful since under deductible, so its a lousy situation for sure, I am a mobile me subscriber and did sent out a signal to locate but nothing happened, I guess I didn't have it turned on or if its a free search or not . So my question is : Since I can not clear the apps and info off the stolen unit thru mobile me...... what can I do to move my apps (like 150) and start fresh on a new ipad...
Does the thief have access to my purchased apps for life ? I would like to somehow not let the new owner enjoy what I paid for!!!

Thanks for the reply...yes didn't even know about passcode set, you would think this could be a default item...
Yes I did change my itunes and mail etc passwords....but seems pretty s&itty that the "finder" can run apps I paid for and I cant turn it off for them and set it to work only on my new iPAD (soon i hope).
Another issue is I haven't synced a backup in months, from what I see on itunes are apps I wasn't using. Will it remember ( once I remember a app, that i bought that I find in the app store again, will it say you already own it and to download the new version???)
Thanks for your help btw...
Sean

Unhandled Win32 Exception -PLEASE IGNORE Posted in wrong section

I am trying to launch the Essbase Integration Server Console. But, each time I try I am getting a an "Unhandled Win32 Exception occured in olapbldr.exe (6352)" I am running Windows XP SP2 plus updates and Hyperion BI v9.3.
Has anyone seen this error and have any ideas how to get the ISC to launch?
Thanks,
Marty
Message was edited by:
user621066

Hello Lorenzo,
If you are installing Crystal Reports XI on Windows 2003 SP1 or Windows XP SP2, then I would suggest you to turn off DEP on your machine and then perform the steps mentioned above.
I would like to share the following information for proper installation of Crystal Reports XI on Windows XP SP2 and Windows 2003 Server machines:
Please note that DEP - Data Execution Prevention has been introduced in Windows 2003 SP1 and XP sp2. DEP prevents Crystal Reports from accessing the memory. By default DEP is turned on in W2K3/SP1 and XP/SP2. If the processor supports DEP, Crystal Reports will not run on these platforms. If DEP is not supported CR will run even on W2K3/SP1 and XP/SP2. Disabling DEP allows Crystal Reports to run in Windows 2003 Server with SP1 and XPu201D.
I would suggest you to try the following steps:
1. Log in as u2018Computer Administratoru2019
2. Make sure that no anti-virus program or spy ware is running on your machine.
3. Right click on u201CMy Computeru201D and select u201CPropertiesu201D.
4. Click on u201CAdvancedu201D Tab and click on u201CSettingsu201D button in u201CPerformanceu201D frame.
5. Click on u201CData Execution Preventionu201D tab. Click on the second option button.
6. Click on u201CAddu201D button and select C:\Program Files\Business Objects\Crystal Reports 11\crw32.exe
7. Click on u201COKu201D button.
Hope this helps
Falk

Edit icon opening blank or wrong page - (Ignore, solved)

Newbie APEX developer here, so sorry if I get the terminology wrong (I have a Lotus Notes app dev background). I hope you can understand what my problem is. Everything was going fine until recently, so I know it must be something I have done but I can't work out what it is.
I have three reports (lets' call them X, Y and Z) which subset records in the Oracle database. The reports display the right data. If I go to report X, and click on the edit icon next to say the first three records (let's call them A, B and C) then the correct record is loaded for editing. Similarly, if I go to report Y I can edit records D, E and F. No problems so far.
However, with report Z I have a problem. If I go to that report first then when I click on the edit icon, I get a blank data entry screen irrespective of what record I select. However, If I have gone to report X first then when I go back to report Z and click on the edit icon next to the first record, it picks up the first record from report X (i.e. record A). Similarly clicking on the edit icon next to the second record causes the screen for record B to display. The same sort of issue occurs if I go to report Y first; if I then go to report Z then it seems to link the first three records to the first three records in report Y i.e. I click on the edit icon next to the first record and record D opens, not the one as shown in the report.
Can anyone shed any light into what might be going on here? The changes I have been making recently were to store the current report page in an application item, so that when the user clicks Cancel it knows what report to return to (which works fine). I've reviewed that and I can't see how that might explain the situation I have.
[Edit: Just in case it helps, I am using Oracle APEX 4.1.0.00.32, the version currently hosted at apex.oracle.com, where I am developing my app]
[Edit: Solved my problem. When I went to the Report Attributes, Link Column table, I noticed that it had values in the Target and Page field, but the Item 1 Name and Value fields were blank. I set these to the same values as per the other reports and everything fixed itself]
Edited by: Pontormo on 15/11/2011 20:59
Edited by: Pontormo on 15/11/2011 21:47

Dear All,
Thank you very much given good suggestion to me, I'm traded to follow above given steps but not yet resolve. Please help.
Download and installed your given
Windows6.1-KB947821-v33-x86
patch file
Still it’s showing white page while trying to click on
Turn windows features on or off.
Thanks & Regards
Veerababu

Wrong Price posting in GRN's

Hi..
We are posted above 100 of GRN's in wrong price. we have to update correct price in that PO. it is possible to correct existing GRN with PO price. pls. suggest how to resolve this issue....
Reversal it will take long time... anyone pls..... suggest to resolve this issue in shortest way...
by
Prabhu

Hi,
Do subsequent debt/credit for the Qty of Invoice Already posted.
Or you can go for revaluation for the GR's that already have been made(But,the case here is that your material account wont be affected if you do revaluation)
Regards,
Deepak.

[Wrong Section Post] Solved

Similar Messages

Maybe you are looking for