Wrong SMTP Header Information

We have noticed that some emails have information in the data section of the SMTP header that looks like "johndoe@ <company.com>" instead of "[email protected]" if they are sent to any mailbox on our Exchange 2010 server.
This wasn't the case before we upgraded to Exchange 2010. Has anyone seen this type of situation before?

Hi itworker,
Thank you for your question.
Did this issue occur all users?
Did this issue take an effect which someone didn’t receive emails?
What is CU of current Exchange 2010?
There are two values in address, which is display and email address, for example ‘displayname<[email protected]>’
We could not make sure which values which is wrong, if displayname Is wrong, we could check it in recipient mailbox and if it is consistent with address format, for example johndoe@ <company.com>. So we suggest you send a header information and displayname
on EMC to [email protected] for our troubleshooting.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Similar Messages

Wrong SMTP

Hi, I run 10.4.11 on a G4. When I try sending an email out to a group I created in Address Book, it says that it can't send to a particular email address even though I know for a fact it is an active and legitimate email address. Moreover, at the bottom of it it lists the SMTP as smtp.mac.com and I do not have an account there. So I went into my settings and deleted smtp.mac.com so that the only one remaining was smtp.myISP.com and it still doesn't work. It is still showing smtp.mac.com even though I've deleted this in Preferences, Accounts for email etc. Any advice? Thanks in advance.

Hi itworker,
Thank you for your question.
Did this issue occur all users?
Did this issue take an effect which someone didn’t receive emails?
What is CU of current Exchange 2010?
There are two values in address, which is display and email address, for example ‘displayname<[email protected]>’
We could not make sure which values which is wrong, if displayname Is wrong, we could check it in recipient mailbox and if it is consistent with address format, for example johndoe@ <company.com>. So we suggest you send a header information and displayname
on EMC to [email protected] for our troubleshooting.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Help Needed regarding the Header Information

Hi,
I am doing a File to IDOC Scenario for CREMDM. The problem I am Facing is that the Basic type is as CREMDM but it should be CREMAS. I am invoking the Function Module IDOC_INPUT_CREDITOR_MDM and I have made a 'Z' out of that. I have also Used a Custom Process Code to link with this Z Function Module, but it is giving me the Error that " Wrong Function Module Called up". In this Z Function Module I have also checked the Exception of "WRONG FUNCTION CALLED".
Can someone tell me the details of how I can know from where the Header Information is being populated and how i.e. the EDI_DC part.
I did the same thing (i.e. made a Z Function Module and a Z Process Code for DEBMDM) and it is working. In case of the CREMDM scenario, there is a check in the Function Module which checks the IDOCtype and it is giving an error there, whereas in the Header it is coming as CREMAS04 but the Function Module is Giving me an Error.
 Can someone Suggest me how I can go about a file to IDOC Scenario for CREMDM and which Function Module i need to Invoke.
Thanking in anticipation.
Warm Regards
Somnath

Hi,
Since this is file to idoc scenrio,the header inforamtion will be populated with the information provided in the mapping part i.e,it will be dependent on the fields mapped during the message mapping in XI .
so the edc_dc control record parameters should be populated with the parameters mapped during the messsage mapping,depending on the file parameters or the constant defined during mapping.
and in your case if the message type is CREMDM then the basic type has to be CREMDM04,which u hav to chk with the xi ppl who performed the mapping.since it is mapped to CREMAS04 u r getting a error in function module.so try changing basic type to CREMDM04.
regards
jithesh

Weblogic puts header information in response

Hi,
 I am using weblogic 5.1 sp10 in a clustered environment.
 When I hit any jsp for the first, I see http header information
 in the generated html page.This happens in once.
 Has anyone faced this problem before ? Or there is something
 wrong with my jsp's.
 Thanks,
 Umesh


 Double check which libproxy.so you are using. Our instance that was doing this
 was using libproxy.so from sp10 - of WLS 4.5.1 (oops). We have just replaced
 it with sp10 from WLS 5.1.0. I will post here if the problem persists.
 Mike
 Umesh Kudtarkar <[email protected]> wrote:
 >recently we moved to sp10 from sp8. We never faced this problem with
 >sp8.
 >I am not sure this is something to do with sp10.As you mentioned this
 >problem is intermittent.
 >
 >Mike Reiche wrote:
 >
 >> Yes, we have seen it often but inconsistently in a test environment.
 >We have NES
 >> 3.6, WL 5.1 SP 8,9 or 10 - I'm not sure which - we have serveral environments.
 >> I only heard about it today.
 >>
 >> Mike
 >>
 >> Umesh Kudtarkar <[email protected]> wrote:
 >> >Hi,
 >> >I am using weblogic 5.1 sp10 in a clustered environment.
 >> >When I hit any jsp for the first, I see http header information
 >> >in the generated html page.This happens in once.
 >> >Has anyone faced this problem before ? Or there is something
 >> >wrong with my jsp's.
 >> >
 >> >Thanks,
 >> >Umesh
 >> >
 >

Header information not getting displayed in the lines

Hello Everyone
I have a very basic question - its very simple but not working for me with so many attempts
My XML structure looks like this . In the RTF , I have header information and then a table for line information looping through G_LINES.
IN this lines table I need the SHIP_CUSTOMER_ID of the header to be displayed. I have tried all options like <?../SHIP_CUSTOMER_ID?> or <?../G_ORDERS/SHIP_CUSTOMER_ID?> , however nothing seems to be working and I am not getting the field to be displayed. Can someone please help?
XML structure is as follows:
<XXSTOL_29251_PICK_TKT>
<LIST_G_ORDERS>
<G_ORDERS>
<CUSTOMER_NUMBER>1411</CUSTOMER_NUMBER>
<SHIPPING_INSTRUCTIONS1></SHIPPING_INSTRUCTIONS1>
<SHIP_CUSTOMER_ID>256</SHIP_CUSTOMER_ID>
<G_LINES>
</G_LINES>
<G_LINES>
</G_LINES>
</G_ORDERS
</LIST_G_ORDERS>
</XXSTOL_29251_PICK_TKT>

Are you grouping within G_LINES? If so, use ../../SHIP_CUSTOMER_ID
or send me the xml and RTF template to [email protected] so that I can get a better look at the data structure and try to help.
Thanks,
Bipuser

Header Information Repeating in the Same Page

Hi Buddies,
I have an issue with PO Print Report. I am trying to reapet the header information by using <?start:body?> after the header informaiton and <?end body?> before the footer informaiton.
If i have two different headers, it displayed in the same page. For e.g I have po header details for PO 30124 and PO 30124-1. These two headers information displaying in all the pages and main body and footer informations goes to the next page.
pls guide me how to solve this one?
Regards
Prabu

Hi,
Are you saying that you need conditional headers? If so, then use <?IF ...> statements.
If your footer is not working correctly make sure your syntax is correct?
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Error says: Warning: Cannot modify header information

I keep receiving an error message after my form is sent (the form still send the information I need just wont re-direct to the next page)
It redirects to a page that says:
Warning: Cannot modify header information - headers already sent by (output started at /home/tommyle/public_html/newp.php:10) in /home/tommyle/public_html/newp.php on line 41
my php code looks like this:
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Tommy Lemonade Beta</title>
<link href="style1.css" rel="stylesheet" type="text/css">
</head>
<body>
<?php
/* Set e-mail recipient */
$myemail = "profiles@tommylemonade";
/* Check all form inputs using check_input function */
$name = check_input($_POST['name'], "Enter your name");
$subject = check_input($_POST['subject'], "Enter a subject");
$email = check_input($_POST['email']);
$message = check_input($_POST['message'], "Write your message");
/* If e-mail is not valid show error message */
if (!preg_match("/([\w\-]+\@[\w\-]+\.[\w\-]+)/", $email))
show_error("E-mail address not valid");
/* Let's prepare the message for the e-mail */
$message = "
Name: $name
E-mail: $email
Subject: $subject
Message:
$message
/* Send the message using mail() function */
mail($myemail, $subject, $message);
/* Redirect visitor to the thank you page */
header('Location: thanks.html');
exit();
/* Functions we used */
function check_input($data, $problem='')
$data = trim($data);
$data = stripslashes($data);
$data = htmlspecialchars($data);
if ($problem && strlen($data) == 0)
show_error($problem);
return $data;
function show_error($myError)
?>
<html>
<body>
Please correct the following error:
<?php echo $myError; ?>
Hit the back button and try again
</body>
</html>
<?php
exit();
?>
</body>
</html>
This is line 41:
header('Location: thanks.html');
Can anybody see what I'm missing?

Yeah, rework the code so you don't get any output before the php code is executed (like below):
<?php
/* Set e-mail recipient */
$myemail = "profiles@tommylemonade";
/* Check all form inputs using check_input function */
$name = check_input($_POST['name'], "Enter your name");
$subject = check_input($_POST['subject'], "Enter a subject");
$email = check_input($_POST['email']);
$message = check_input($_POST['message'], "Write your message");
/* If e-mail is not valid show error message */
if (!preg_match("/([\w\-]+\@[\w\-]+\.[\w\-]+)/", $email))
show_error("E-mail address not valid");
/* Let's prepare the message for the e-mail */
$message = "
Name: $name
E-mail: $email
Subject: $subject
Message: $message
/* Send the message using mail() function */
mail($myemail, $subject, $message);
/* Redirect visitor to the thank you page */
header('Location: thanks.html');
exit();
/* Functions we used */
function check_input($data, $problem='')
$data = trim($data);
$data = stripslashes($data);
$data = htmlspecialchars($data);
if ($problem && strlen($data) == 0)
show_error($problem);
return $data;
function show_error($myError)
?>
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Tommy Lemonade Beta</title>
<link href="style1.css" rel="stylesheet" type="text/css">
</head>
<body>
Please correct the following error:
<?php echo $myError; ?>
Hit the back button and try again
</body>
</html>
<?php
exit();
?>

How can I include the Header Information....for a File to IDOC Scenario

Hi,
I made a File to IDOC Scenario with DEBMDM06 for MDM>XI>SAP R/3. The Header Information in the XML File which is at the XI end is Missing. For that reason In Tcode SXMB_MONI we are getting an Error that "HEADER Information Missing: Message should Start with EDI_DC40" i.e the Header Information.
My Question is that whether we can do some changes in the Message mapping Step in the Integration Repository. I HardCoded the Few mandatory Fields that were there but it Again gave me the Same Error as above.
Can you please Suggest some Solution for this. Since the data is Coming in from MDM part the Header information is not there but It actually Important as it has got all the Port Information.
Kindly Inform me some Solutions.
Thanks & Regards
Somnath

Hi Suraj,
Thanks for ur Reply, but Since we are Doing a File to IDOC Scenario the IDOC DEBMDM is on the Right Side in Message Mapping and as U know it is Mandatory to Map an IDOC on the Right Part. EDI_DC40 is coming as it is there in the IDOC but our XML File Does not have that. If we Don't Map then it Becomes RED, which is an Error.
Furthermore in the Receiver Agreement we have put the Necessary Details such as Sender Service and Receiver Service along with the IDOC Communication Channels.
Can U give as a Better Insight on this Note how to check the Header Part as it is mandatory to MAP.We also tried to HARDCODE it by putting those Values and Mapping them to a Constant but it is Giving the Same Error.
Thanks and Regards
Somnath

Missing header information on a pdf image?

How do I ensure the header information is on my pdf image

I'm not aware of any apps that edit PDF documents. Many that let you edit word documents, but unfortunately, not PDF's.

Header information not displaying in ABAP Webdynpro record working time

1. I am not seeing the header information, personnel number, name, cost center, on the ABAP Webdynpro record working time timesheet. When I run the timesheet profile in CAT2 the header contains the personnel number, name, cost center, but these do not display when the ABAP Webdynpro timesheet is run
2. Is there a version of the ABAP webdynpro timesheet that prompts for the personnel number, date and profile prior to executing the timesheet? I want to define an ESS link for managers to update timesheets of individual teammates. The teammate do not necessarily have to be their direct reports

Hi David,
CATS Webdynpro application is a OIF fpm. Please check if you have performed the FPM IDR configuration properly.
In standard, the ESS CATS does not prompt for the personnel number except in CE scenario. In MSS addon, you have an option to launch the ESS CATS application on-behalf of the employee. Please refer to the sap library documentation.
Hope this helps,
Regards,
Roy

Work order header information from BAPI_ALM_ORDERHEAD_GET_LIST

Upfront I'll admit that this question likely falls outside of MII as I am getting bad results in SE37 as well. Was hoping others in this group have experience with this.
When I use BAPI_ALM_ORDERHEAD_GET_LIST there are several work orders that do not get returned, and I can't figure out why, or even what is the common thread between them. The missing orders are viewable via iw33, and information can also be returned from BAPI_ALM_ORDER_GET_DETAIL.
Right now, the only thing I pass in OPTIONS_FOR_ORDERID with a range of orders (ie 20 or so). Orders are returned in the correct range, just not the one I am looking for.
Rod

Hi Rod,
The only thing I can think of is that there are times where orders (or other objects) are created outside of normal procedures. My experience was with Batch histories, but if the objects are not created in the normal process (a nebulous term at best), they will sometimes not be stored in all the proper tables. Can you check the processing history of the orders missing to see if there are any discrepancies there?
Otherwise, you may need to get some ECC side help. The ABAP code in the underlying function module may direct you to all the tables which should be populated with the correct data so you can check which tables are not populated.
An alternative option for getting the work order header information would be to go back to the old reliable RFC_READ_TABLE.
Good luck,
Mike
Edited by: Michael Appleby on Feb 12, 2011 4:13 PM

How to pass JMS header Information to proxy field

Hi,
I am working with JMS to Proxy scenario (Synchronous).
I am getting one header field at sender JMS channel which need to be mapped with one of the Proxy field.
and similarly when proxy returning one field value that need to be mapped with receiver channel header information.
could any one help me on how to achieve this.
regards,
Navneet

Hi,
>>Now My Question is how can I get Dynamic Configuration Key
Like this
1. switch on ASMA in sender JMS communication channel
2 Assign this udf to target field
UDF code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS","DCJMSMessageProperty9";
String valueOld = conf.get(key);
return valueOld;
3. Do a end to end testing (message mapping test will;l throw error)
Regards
Suraj

Error after compiling DFF at Title: Additional Header Information

Hi All,
The following error message is apeared after creating DFF at Title: Additional Header Information
"The descriptive flexfield "Additional Header Information" of application "Order Management" uses features which are only supported in oracle forms. This flexfield may not function in other environment such as OA Framework or PL/SQL APIs."
The numbers of warning messages: 3
Can anyone advice please? Will this problem affect customizations?
Best Regards,
Hans Chang

Hi everyone
The issue is solved and here is the answer.
"Logon to Oracle E-Business Suite.
Go to System Administrator (or System Administration) --> Oracle Applications Manager --> License Manager
In the license manager screen click on the link Languages.
Click on the NEXT button.
Verify whether American English is set as Base Language
If American English is not set as Base Language. Select American English Radio button in the Lower part of the screen. Click on the Submit button."
Thanks
Engin

How to use header information in line records while inserting into table?

Hi,
Requirement: Data in flat file needs to be loaded into Oracle Tables.
File has header information (basically file information, some account info) and Line information ( Actual data need to be loaded to oracle tables).
File has position based data, first 2 char for Header is 00 and line is 50
Now, header has some extra info which needs to be loaded along with details lines ( This has to be done using sql loader control file).
What should be the control file logic to capture header information in details lines?
Please suggest.
I am calling this control file from Unix, so I can change the control file definition dynamically by retrieving the first line of the data file and modify the control file before executing the sql loader command. Is there any option to achieve this using SQL LOADER commands?
Thanks,
Venkat.

Pl post details of OS and database versions.
Use the WHEN clause to load header and detail lines into separate tables, then write PL/SQL code to perform needed post-processing.
See the examples in section titled "Distinguishing Different Input Record Formats" here http://docs.oracle.com/cd/E11882_01/server.112/e22490/ldr_control_file.htm
HTH
Srini

Oracle Alerts - Suppressing Mime-Header information in plain text emails

Hi there
Is there a way to suppress Mime-header information at the top of an alert email? I mean this stuff:
>
Mime-Version: 1.0
Content-Type: multipart/mixed;
boundary="----=_Part_17_6226724.1264085542237"
Content-Language: en
X-oracle-workflow-nid: ALR[1/0000@DEVE]
------=_Part_17_6226724.1264085542237
Content-Type: text/plain; charset=ISO-8859-15
Content-Transfer-Encoding: 7bit
Content-Language: en
For some reason, it is appearing in some emails, but not others, and detracts from the readability of the alert text.
Any help appreciated.
Regards
CK

852970 wrote:
Am still new in Oracle and am trying to find the solution for this i.e note 472822.1 - Odd Email Header And Footer In 11.5.10.2 Alert. How can locate this?? thanx alot
My Oracle Support website -- https://support.oracle.com
You need to valid username/password to access the site/doc.
Thanks,
Hussein

Wrong SMTP Header Information

Similar Messages

Maybe you are looking for