Wrong SMTP

Hi, I run 10.4.11 on a G4. When I try sending an email out to a group I created in Address Book, it says that it can't send to a particular email address even though I know for a fact it is an active and legitimate email address. Moreover, at the bottom of it it lists the SMTP as smtp.mac.com and I do not have an account there. So I went into my settings and deleted smtp.mac.com so that the only one remaining was smtp.myISP.com and it still doesn't work. It is still showing smtp.mac.com even though I've deleted this in Preferences, Accounts for email etc. Any advice? Thanks in advance.

Hi itworker,
Thank you for your question.
Did this issue occur all users?
Did this issue take an effect which someone didn’t receive emails?
What is CU of current Exchange 2010?
There are two values in address, which is display and email address, for example ‘displayname<[email protected]>’
We could not make sure which values which is wrong, if displayname Is wrong, we could check it in recipient mailbox and if it is consistent with address format, for example johndoe@ <company.com>. So we suggest you send a header information and displayname
on EMC to [email protected] for our troubleshooting.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Similar Messages

Wrong SMTP server got selected when sending email

For a Gmail account I set the outgoing mail server the smtp.gmail.com and checked the "only use this server" box.
Yet if I look at the full headers for an email I just sent it used a non-Gmail SMTP server from another account to send the email! This is confusing, and could potentially be embarrassing.
Anybody know what might be wrong?
Thanks,
Doug

Graley wrote:
I wouldn't give in too early. Easy for me to say. Persistence often pays off. Mvks is a wondrous beast. It seems o learn about your preferences as you try. If smtp continues to fail, rather than dump Mail, you could buy your own smtp server at outbound.mailhop.org. Google will find it. That works with any mail client anywhere.
Too early?
I've been in Mail h*ll ever since upgrading to Mavericks! I've been through 3 versions of the Mavericks Mail app so far. I've been nothing but persistent - and neglecting real work just to do beta testing for Apple.
Mailplane right now is working fantastically well. And with all the keyboard shortcuts for labeling, filing and navigation I'm going zip zip zip through this morning's mailbox at a rate I never was able to before in Mail.
I'm plain tired of fussing with it. I just want my mail to be reliable!
Thanks,
doug

Wrong SMTP Header Information

We have noticed that some emails have information in the data section of the SMTP header that looks like "johndoe@ <company.com>" instead of "[email protected]" if they are sent to any mailbox on our Exchange 2010 server.
This wasn't the case before we upgraded to Exchange 2010. Has anyone seen this type of situation before?

Hi itworker,
Thank you for your question.
Did this issue occur all users?
Did this issue take an effect which someone didn’t receive emails?
What is CU of current Exchange 2010?
There are two values in address, which is display and email address, for example ‘displayname<[email protected]>’
We could not make sure which values which is wrong, if displayname Is wrong, we could check it in recipient mailbox and if it is consistent with address format, for example johndoe@ <company.com>. So we suggest you send a header information and displayname
on EMC to [email protected] for our troubleshooting.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Replies often go to wrong SMTP when message in local folders

This happens for me when replying to a message, M, in the
following cases:
A: M is in a local folder.
B: The To and CC fields do not match the receiving account.
Previously the reply went to the right place, presumably
because the SMTP server was looked up through the
X-Account-Key field.
I have verified that the X-Account-Key lookup should work.
In my case, X-Account-Key matched "id3", "id3" matched "smtp3"
and "smtp3" match the expected SMTP server.
However, a different SMTP server was chosen for the reply.
It wasn't even the default server!
I have verified that when the To or CC field matches the
correct account (i.e., in my example, the account for "id3",
the correct SMTP server is chosen.
For mailing lists the To and CC fields seldom match the
receiver's accounts.
Thanks for your help,
David A.

Further to what I said originally. It looks like it's using item #3 in "mail.smtpservers"
mail.smtpservers; smtp3,smtp2,smtp1,smtp4,smtp5
It should be using smtp3. This happens to be default smtpserver.

Mac Mail Uses wrong "from:" Address .... ouch!

I have multiple e-mail accounts set up on Mac mail. Each email account has it's own SMTP server defined. The "use only this SMTP server" is checked on all the accounts.
Today I sent an email from one account ... let's call it [email protected]
The outbound server was set properly.
The mail was sent, and appears on the outbox for [email protected] Just like normal.
I got a reply back from the person I sent the e-mail to, and the reply shows that my e-mail originated from a DIFFERENT account. Let's call it [email protected]
The e-mail I sent originally does NOT show up in the Sent e-mail box for [email protected] It shows up in the Sent e-mail box for [email protected] where it should.
So ... it looks like Apple Mail sent an e-mail from the wrong account, using the wrong SMTP server. The mail program obviously doesn't konw what SMTP account to send mail from.
Wow.
I'm shocked.
This is beyond lame.
lame
lame
lame
lame
Has anyone else seen this?
--R

Follow up to my own question. I do see others have had this problem:
https://discussions.apple.com/thread/2253932?tstart=0
It makes no sense whatsoever for Apple Mail to "fall back" to an SMTP server that is not assigned to a particular account. It's far better for the SMTP connection to fail and NOT send the e-mail from the wrong account, instead of confusing all the people I send e-mails to.
This SMTP fallback "feature" ***** and should be gotten rid of.
it *****
it *****
it *****
it *****
--R

SMTP Password Error????

I send 100's of emails a day with Mail and never have any problems. Today after every few emails I'd get a box popping up saying Mail had the wrong SMTP password. I would type in my password and would then send fine. I went to Preference and the password was set-up properly. This is getting annoying.
Anybody know what might be going on??????

I fixed my bizarre problem of rejected pw's by shortening them to abot 8-10 characters

SMTP uses localhost?

I cant get my mail to send in a JSP running on JRun on Windows Web Server.
It keeps giving me message:
javax.mail.sendFailedException...Could not connect to SMTP host: 123.45.67.999...connection refused
What or how do I find the SMTP address?
<%@ page import="javax.mail.*, javax.mail.internet.*,java.util.*;">
try
InternetAddress toAddress = new (InternetAddress("[email protected]");
InternetAddress fromAddress = new InternetAddress("[email protected]");
Properties props = new Properties();
props.put("mail.smtp.host", "123.45.67.999");
Session mailsession = Session.getDefaultInstance(props, null);
catch(Exception e)
out.println(e);
}Do I just use the word "localhost" and that will find the correct SMTP?
props.put("mail.smtp.host", "localhost");
I can ping to the SMTP address (123.45.67.999).

Sorry for the post.
I had the wrong smtp and it now works.

SMTP Banner mismatch - still not understanding how this works?

I have a new Exchange 2010 install.
My outgoing email is getting flagged as spam. MX Record test shows SMTP banner mismatch.
I understand that you don't change the FQDN on the receive connector using the GUI.
I have created an additional Receive connector so I have the following:
Receive Connectors:
Client Comm
Default Comm
My question is how to I change the smtp banner and which connector do I set it on. The syntax needed for the Set-ReceiveConnector is kicking my butt.
It sure is frustrating that the new Windows World is so centered around Powershell command lines. Very frustrating and backwards technology.
The documentation on the Set and Get-Receiveconnectors is very poorly written. IMHO.

My reverse DNS is setup correctly.
This is an issue with the receive connector banner page. Some email hosting services, AOL, Hotmail etc. are flagging my outbound email as junk. So they must be doing a test to see that my receive connectors have the wrong SMTP banner.
My send connector is ALSO setup correctly.
I need help with the syntax in using the Set-receiveconnector cmd.
Follow:
http://technet.microsoft.com/en-us/library/bb125159(v=exchg.141).aspx
Create a Internet type custom receive connector. My assumption is that you receive internet messages directly to the hubs. When you create an Internet Receive Connector it will allow anonymous senders to connect to it so it will work for internet messages.
In the Specify the FQDN this connector will provide in response to HELO or EHLO field, type the name advertised in response to the SMTP HELO or EHLO verb. If you leave this field blank, the fully qualified domain name (FQDN) of the Hub
Transport server or Edge Transport server is automatically added when the connector is created
Twitter!:

Problems with my new E5, help needed

I just got me a new E5 about a week ago. Despite reading a lot on this forum, I still have two major issues setting up this device; so I need some help. Problem number one is that I cannot set up my email. I have "aol" email that falls under "other" in the email set up section. Some of the screens listed in Pool of Knowledge subsection (like choosing POP3 or IMAP) does not even come up in my e5 during email setup screens. What to do to set up aol email account.
Problem number 2 is that I cannot transfer my contacts and other data from old device (Nokia X2-01) to the new e5. I paired them easily using Bluetooth but when it get to the point of transferring the data, I hear a "click" sound in the e5 and "Bluetooth disconnected.... " error message comes on. I have tried upteenth times but I get the same result. When I tried to transfer contacts one by one, using Bluetooth business card option it works; but I have over 800 contacts and I would like to use the switch route. What to do to solve this problem?. I hope I do not have a faulty device.
With God, all things are possible

I can't help you with the contacts problem, but have you made any progress with email? Just because you pick the Other category, doesn't mean you need to enter every server detail. I use Earthlink email, but simply typing my email address causes the wizard to fill in every other detail besides my password. (Curiously, it always uses the wrong SMTP server.) But once setup finishes, I can change any of the settings. I hope that helps. (And BTW, the above may not apply if you opt for using Nokia's push service.)

The Top10 most frequently asked questions and answers (FAQ) January 2009

Dear SAP Business One Community members,
We will provide you on a regular base the top10 most frequently asked questions together with the related answers.
The Top10 from January:
1. How to install SAP Clients?
According to the symptom, this issue can be caused by the missing "SQL Native client" component.
In this situation, please refer to [SAP Note 1015229|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=703028],to resolve the issue.
2. How to put sales order number on A/R invoice?
1. Create a UDF in A/R Invoice at Row Level.
2. Apply Formatted Search on this UDF.
3. Use the Below Query:
Select T0.DocNum From ORDR T0,RDR1 T1,DLN1 T2
Where T0.DocEntry = T1.DocEntry And
T1.DocEntry = T2.BaseEntry
And T2.DocEntry = $\[$38.45.0\]
4.Now you can get this UDF in the print layout(template).
3. How to know variable in Print Layout?
Variable can be retrieved checking System Information in view, however it is not supported
Please refer to the attached [SAP Note 723783|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=703028] - the use of system variables isn't supported as their definitions might change after upgrade.
Variable fields are not supported due to the following reasons:
1. Variable numbers might change after upgrading to a higher version.
2. The user can use variable numbers which are not linked to the document or form related to the document editing.
The list of variables is only supported for 2007 A version.
We do not have such kind of variables list for 2005 B version.
You can find the documentation of variables on Service Market Place in the following:
Go to the [Documentation Ressource Center|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000707558&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&_OBJECT=011000358700002906862005E] ->2007 A Version->How to guide->How to use PLD variables file in 2007 A Version.

4. How to clear the SBOMailer queue?
As a workaround, please use dummy or wrong SMTP server and send all those mails to that address.
After sending those mail to dummy SMTP, you can see the mail status changed to "E" (Error), then after setting up the correct smtp mailer
would not try to send the mails with status "E".
5. How to use dialer in BP?
1.How does this work?
If you have Microsoft#s automatic phone dialer installed, you can press CTRL+TAB to automatically dial the numbers in the telephone fields.
2. Are there settings I can change? In the System Initialization - General Settings - Services, to place calls directly through SAP Business One if a phone system or modem is installed on your computer or in your network, in these fields specify the area code and the number to dial for an outside line.
3. How can I troubleshoot when this doesn't work? Try to check if the number is correct, the best way to check it is to use the MS Phone Dialer and to enter this number exactly as it is written in B1. If the dialer succeed dialing this number so B1 should succeed too, if the dialer failed check what is the problem with the number or with the Microsoft Phone Dialer.
6. Iu2019m unable to set exchange rate in credit note
To set an exchange rate in a Credit Note is only possible to if the credit note is not based on another document. In this case the exchange rate of the base document will be considered. Please see also SAP Notes [686224|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=686224] und [703028|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=703028]

[Forum FAQ] Date Deduplication frequently asked questions and solutions

Q1: Sometimes we deleted a folder or a file on a deduped volume. The Free space is not released. How to do a refresh to show the correct result?
A1: The following cmdlet could help to perform a refresh (Figure 1):
Update-DedupStatus
Figure 1: Force a refresh
Q2: How to remove a file on a volume from Deduplication list after the whole volume is already deduped?
A2: Run the following cmdlet:
Expand-DedupFile –path: “X:\folder\file”.
Note: It does not support wildcards in the -Path parameter (Figure 2).
Figure 2: Error when use wildcards
We can do standard PowerShell pipelining to automate for multiple files such as:
dir X:\folder | expand-dedupfile
Here is an example:
Figure 3: Example
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

4. How to clear the SBOMailer queue?
As a workaround, please use dummy or wrong SMTP server and send all those mails to that address.
After sending those mail to dummy SMTP, you can see the mail status changed to "E" (Error), then after setting up the correct smtp mailer
would not try to send the mails with status "E".
5. How to use dialer in BP?
1.How does this work?
If you have Microsoft#s automatic phone dialer installed, you can press CTRL+TAB to automatically dial the numbers in the telephone fields.
2. Are there settings I can change? In the System Initialization - General Settings - Services, to place calls directly through SAP Business One if a phone system or modem is installed on your computer or in your network, in these fields specify the area code and the number to dial for an outside line.
3. How can I troubleshoot when this doesn't work? Try to check if the number is correct, the best way to check it is to use the MS Phone Dialer and to enter this number exactly as it is written in B1. If the dialer succeed dialing this number so B1 should succeed too, if the dialer failed check what is the problem with the number or with the Microsoft Phone Dialer.
6. Iu2019m unable to set exchange rate in credit note
To set an exchange rate in a Credit Note is only possible to if the credit note is not based on another document. In this case the exchange rate of the base document will be considered. Please see also SAP Notes [686224|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=686224] und [703028|http://service.sap.com/sap/bc/bsp/spn/smb_searchnotes/display2.htm?note_langu=E&note_numm=703028]

Mails sent on my iPhone isn't shown in the sent folder

Whenever I send an email it does not show up in the sent folder on my iPhone or on my Mac when I sync. Why could this be?
It works just fine, I recieve mails and I'm able to reply and all that. I just can't see them in the sent folder which is annoying.
Hope you can help me

I think figured it out. The original problem was that Mail.app was not using Gmail's smtp server. In the account preferences in Mail I have checked the box which says: 'Only use this server' under the pop-up list which has Gmail's smtp server selected. But examining the full headers of emails sent via supposedly different smtp servers (via different email addresses with all have that 'Only use this server' checked) and emails sent via Gmail's web interface gave me the strong indication that Mail.app is not using Google's smtp server.
Lo and behold, once I switched between my corporate network and a cellular-modem based one which caused Mail to fail to reach the smtp server (inside my corporate network only my corporate smtp server works and outside every smtp server except the corporate one works) and therefore brought up a dialogue which allowed me to choose the smtp server and I selected Gmail's smtp server, my sent messages showed up in Gmail's sent folder.
Even better, after restoring my iPhone (syncing wasn't doing the trick), emails sent from my Gmail account on the iPhone show up in Gmail's sent folder (and Gmail's sent folder also shows up on the iPhone).
As usual, if you for your life's sake cannot figure something out, most likely something you consider a fact is actually not the true. I was assuming that Mail was using Gmail's smtp server, that is what I told Mail to do. But apparently, once Mail fails to reach an smtp server and you tell Mail to use another it continues to use this alternative server forever until it fails to reach this one and ask you again (and that is the only way to reset it). And more importantly this alternative smtp server gets carried over to the iPhone. Even more sneakily, if you check the smtp server setting on the iPhone it still reads the 'correct' one but it is using in fact another one (visible from the full headers of the received email).
Getting Mail to use the correct smtp servers is its own pain in the butt. And after the umpteenth restore with everything working now, I now unchecked the option to sync mail accounts (since I keep switching networks on my Mac, I'm sure to end up with the wrong smtp servers associated with my email accounts).

Mailboxes shown in mail!

Hi
I am new to mac, have mac pro and leopard, thats fien, now I am transferring my outlook stuff to leopard, that one goes well too, but setiing up email accounts in mail i do not understand why my new .MAC account is shown wneh the account, with my new .mac email name, is also shown, seems the are indentical in contenst.
can i delet / clos on of them ?
I have a pop account to, that works fine.
second question, sometimes the send action just result in a eternal rotating icon, an d then send does not take place, get an errormessage about smtp serve offline or not responding. however veh I tets the all i fine.
PAlle

you may have two duplicate .mac accounts. go to mail>preferences>accounts and on the left hand side column do you have two .mac accounts showing? if so you can delete one.
if you have problems with sending, either the smtp server is offline, or your internet connection has some issues, as in slow for example, which results in the process to check the smtp server times out or gives you an error. if you do send eventually it is not an issue with a wrong setting, as in wrong port or wrong smtp setting, just an issue with the internet connection.
hope this helps

Bursting Excel file

Hi guys
here is my problem, i have a report that produces xml result which calls the bursting engine to send it out. My report and also bursting program works perfectly however when i change the output-type in the bursting control file from pdf to excel or in fact any other output-type except pdf the bursting program fails with the error
Error!! Could not deliver the output for Delivery channel:null. Please check the Log for error details.
i looked for that error and i came across many post that identified the problem as wrong SMTP server. However when i change the output-type back to pdf this problem get solved.
how do i enable the XDOBURSTREP log file, and how do i see it
the template it uses is rtf
here is my control file
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="/CGLRPALR/G_REPORT">
<xapi:delivery>
<xapi:email id="5444${P_CONC_REQ}" server="mailhost" port="25" from="[email protected]" reply-to="[email protected]">
<xapi:message id="5444${P_CONC_REQ}" to="[email protected]" attachment="true" subject="Monthly Ledger Report for ${DEP_DECR} - ${DEP_NUMB}">
EMAIL TO: ${E_TO}
EMAIL CC: ${E_CC}
EMAIL BC: ${E_BC}
These information were sent by ${P_CONC_REQ} on ${REP_DATE}
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="${DEP_NUMB}" output-type="excel" delivery="5444${P_CONC_REQ}">
<xapi:template type="rtf" location="/m/net/2/CGLRPALR-DETAIL-USD-STTM.rtf" filter=".//G_HEAD_INFO[REP_CONTENT='DETAIL']">
</xapi:template>
<xapi:template type="rtf" location="/m/net/2/CGLRPALR-SUMM-USD-ACCT.rtf" filter=".//G_HEAD_INFO[REP_CONTENT='SUMMARY']"> 
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>

You can view the log file for the output post processor service by going to the manage concurrent managers form. Click on requests and click on show manager log.
Also, take a look at the following note, it's quite helpful: Troubleshooting Oracle XML Publisher For The Oracle E-Business Suite [ID 364547.1]
Patrick

Cant send mail...wtf!!!!!!

I am trying to use the simple little example that sun gives and have listed how I have it below, but everytime I run it I get a java.lang.NoSuchMethodError : main
exception in thread "main"
I dont think anything is wrong with the code, the only thing I can think of is there is a problem with me having a firewall or my smtp may need user authentication
or could it be that I have the wrong smtp information, I pretty sure this what it should be, but if not would it cause this sort of error
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
public class mailtest2{
public void main()throws Exception {
String host = "xxxxxxx";
String from = "[email protected]"; //these of course are fake
String to = "[email protected]";
// Get system properties
Properties props = System.getProperties();
// Setup mail server
props.put("mail.smtp.host", host);
// Get session
Session session = Session.getDefaultInstance(props, null);
// Define message
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO,
new InternetAddress(to));
message.setSubject("Hello JavaMail");
message.setText("Welcome to JavaMail");
// Send message
Transport.send(message);
}

nevermind it was a fricken stupid problem that I fixed

Wrong SMTP

Similar Messages

Maybe you are looking for