Wrong Status in SPAM

Dear All,
I have applied CIN(Country Version India) add-on to my IDES 4.6c.
Thought the application was successfull, but it does not show the CIN component in SPAM when we click on support package level.
Any suggestions would be appreciated.
Rgds,
Nk

Where do you click in SPAM?
Markus

Similar Messages

Error : SPAM_CONFIRM_PATCH Wrong Status: R

hi gurus,
environment: SAP4.7EE X200, SUN SOLARIS 4.x, ORACLE9.2
SPAM 6.20/20
During importing the patches TOTAL :6
SAPKA62060
SAPKB62060
SAPKE470061
SAPKE47060
SAPKGPHA61
SAPKGPHA60
At Phase Run_SPAU_?: I called call SPAU, I haven't done anything simply pressed F3(within few seconds), then easy access screen was displayed.
then i again ran tcode SPAM --> import
it showing error as: SPAM_CONFIRM_PATCH Wrong Status: R
IT is URGENT, plz give provide me the INFORMATION
Thanks in advance

Hi RK,
go through these links
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/frameset.htm
Samrat

'Idoc has wrong status'

Hi SDN,
Good morning to all of you. I came infrom of you with a small quaery related to IDOC. My query is sales order is going to be created via IDOCs (Which came from XI) through FM IDOC_INPUT_ORDERS. While creating the SO we are generating the mails to users if any errors will be encountered, but here every thing is working fine and some times it is generating mail with the message 'Idoc has wrong status' for successful also. Not for all only for few sucessfull SO's it is generating mail. Please suggest me any configuration i need to check or any thing else. Please suggest me....Appriciate your valuable suggestions......Waiting for your valuable reposnse.....
Regards,
Kumar

Hi Santosh,
Thanks for your immediate response. It is giving me status 53.
Regards,
Kumar

Wrong status in protocoll of SLFN and SDCR

Hello developers,
when i change the status by executiong an action in SLFN or SDCR the protocol is filled with a wrong status text.
For example:
status "in process" --> status "approved"
In the protocol you can find the technical key for the new status (E0009) or a wrong text "to be approved".
Do you have an idea to solve this problem?
Best regards,
Jens

FYI
The problem were missing datasets in the table TSOCM_STAT_PROP.
Regards,
Jens

Search Complaints: wrong Statuses are displayed

Hello Experts.
I am working with SAP CRM 7.0 and I have an issue when it comes to searching for Complaints.
When I search for all Complaints, I see statuses 'open', 'completed', etc...but I do not see my statuses 'pending', 'concluded' and 'responded to customer'! (the other fields are ok, such as description, sold-to-party, priority, transaction type...the problem is just with field 'status', which brings the wrong statuses).
In other words, I have my own User Status profile customized, with three different statuses: Pending, Concluded and Responded to Customer. However when I search for my Complaints I cannot view my statuses. Other statues are shown instead.
Any ideas on how to solve this?
<< Moderator message - Please do not offer points >>
Thanks a lot in adavance.
Luis.
Edited by: Rob Burbank on Nov 19, 2010 5:03 PM

Hello dear Mittal,
I have found out a way to solve this!
The problem is that some fields are hidden in the configuration of the Design Layer. (spro - crm - ui framework - ui framework definition - design layer - copy sap design objects)...if you see object type BT120_CPL you will see that the design object status is hidden.
There is a configuration to deactivate hiding of fields: spro - crm - ui framework - ui framework definition - design layer - deactivate hiding of fields)...so now, everything in the attributes is available, either in the 'display' or 'shown', and I can move the fields...user status now shows as well in the 'display'!
Thanks for your help...
Luis.

VM2.2 manager page shows wrong status "Shutting down" for VM Guest

Hi,
VM manager page shows wrong status "Shutting down" for VM guest, I can very much connect to console and see it is up and running.
It happened when trying to shutdown VM guest manually but in parallel VM server got rebooted automatically.
Any information on How to correct the status in VM manager page?
Thank you.

I found below this solution on http://download.oracle.com/docs/cd/E15458_01/doc.22/e15441/appendix_e.htm#BHBCIAJB
To solve this problem, change the status manually as follows:
1.Make sure that the virtual machine in the target server has been shut down. Use xm list or virsh list to check the virtual machine name and ID.
2.If the virtual machine is running, use xm shutdown vm_id or virsh shutdown vm_id to shut it down, where vm_id refers to the virtual machine name or ID.
3.Use xm list or virsh list to check if the virtual machine has been shut down. If it is still running, use xm destroy vm_id, or virsh destroy vm_id to shut it down.
4.Log in as oracle (or root first, then su - oracle) to the computer where Oracle VM Manager is installed, and run the following commands to change the virtual machine status to Powered off in the Oracle XE database:
export ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server'
export ORACLE_SID=XE
$ORACLE_HOME/bin/sqlplus / as sysdba
SQL> update ovs.ovs_vm_img t set t.status='Powered Off' where t.img_name like 'vm_name';
SQL> commit;
SQL> quit
vm_name refers to the virtual machine name.
5.Retry your operation, or delete the virtual machine directly.

Wrong status on sales orders

Hi guys,
Sales orders are created in R/3 v 4.6c and downloaded to CRM v 4 SP08.
In some sales orders, the status in R/3 is 'Completed' but in CRM is 'In process', 'Open', etc...
I downloaded again these sales orders but problem persist. I executed from CRM the report CRM_R3_CHECK_STATUS but problem persist.
Have somebody any idea about how to solve this ?
Kind regards
Juan

Hello Friend,
if you sales return acount mapped correct then This is not wrong entries it is correct .
some time SAP find Variance base on target document amount or with out delivery make issue note for same materials.
Thanks
Manvendra SIngh Niranjan

Showing wrong status in sales order

Hi Friends,
I have an issue with thrid party sales order processing
Step#1
My client runs the sales order for
      Material                     Qty
p-100                   10
p-101                10
p-102               10
step-2
Purchase requisition created and from vendor delivery happened
Step-3
My user created billing with reference of sales order for below material
Material          quantity
p-100          20
p-101                  10
p-102          20
step-4
user found mistake and he cancelled the invoice and created new billing document
for
material                     quantity
p-100                       10
p-102          10
again he found mistake and cancelled this billing document and create one more billing document with reference of sales order
material     quantity
p-100     10
p-101   10
p-102     10
now the issue is for p-100 and p-101 it showing being process and p-101 it showing status as completed
please suggest me

Hi,
Check the code written in the user exit if anythingis going wrong there.
First pull the data till PSA and try to check if correct data is coming till PSA.If that is the case try to debug the update from PSA to target and check the values of the field where xactly it is getting changed.
Do u have any transformation in the BI side?
Please feel free to get back...
Regards,
Abhsihek

Wrong status in /CCM/D_UPD_STATE after publication

Hello,
when I click on a procurement catalog during shop trx, SRM tries to connect to CCM and gives following error: Your session has timed out - call up SAP Catalog Search Engine again in SRM "
There is nothing wrong with profile settings (RZ10). I know from the past that replicating the catalog solves this problem. So I replicated the catalog and the status in SLG1 is green but strange thing is that in table /CCM/D_UPD_STATE, the status for the SE entry is still on 03 instead of 05. So the problem still occurs.
Can someone help me please ?
(please no replies on profile settings, since other catalogs work fine)
Thanks,

Hi,
The error 'Your session has timed out - call up SAP Catalog Search Engine again in SRM' generally means one of three things:
1. The catalog is not published, i.e. there is no SE version active in table /CCM/D_CTLG_REQ
2. The index for the catalog is destroyed/invalid, use report /CCM/CHECK_TREX to verify this, if it is
orange or red it should be deleted and the catalog published again in FULL publication.
3. Some data in the call structure is incorrect, e.g. the user in the call structure does not have assigned
the role /CCM/CATALOG_SEARCH or does not exist in the CCM client.
Regards,
Jason

Wrong Status displayed transaction STWB_WORK and STWB_2

Hi ,
we have created a ZSLF Transaction type (Copy of SLFN)
we have defined our own messages status like Open, Clarification, Rejected.... etc
but when the status are seen under the Test Plan>>Test Package (Tcode:stwb_Work) or Tcode STwb_2(Test Plan) the status are wrongly displayed.
e.g: status New is displayed instead of Open , "Send to SAP" is displayed instead of "Rejected"
can any one point us where to look for this issue correction
Regards,
Pradeep L

solved.

SSHR applying for abesnce: Wrong status

Hi experts
Normally if i apply for example holday and sending my request, the status should be pending, as far as my request is not approved. But this is not the case. i will get the status: Work in Progess instead: Pending.
Does anybody has an idea. I am using oracle apps: 12.0.4 on HCM.
I think, when the request is not approved the status should be set to Pending and not to Work in progress.
Is there any patches which should be applied, or something is wrong with the work flow, which should be corrected. It is very urgent to solve this problem, and the user are waiting for a response.
Thanks in advance for your help.
Mehdi

Hi,
Post your question in the HRMS forum for a better/faster response.
Human Resource Management (HRMS)
Human Resource Management (HRMS)
Thanks,
Hussein

PCR "Status overview" showing wrong status

Hi,
We are implemeting Personnel Change Requests using Adobe forms. Our approval processes are working fine. But the status overview link in the "Personnel Change Request" tab shows wrong data. It shows the status as "Open/For Approval" for all PCR's submitted irrespective of the actual status. When i check in Started workflows from Txn:SBWP in R/3 i find that a few of these workflows have actually completed.
Is there any configuration that is to be done to display the correct status? Any inputs on this would be of great help.
Thanks,
Prasath N

Hi Raja,
Thanks a lot for your inputs. Finally i found the issue. I have not set the system status using the task TS50000049 and hence the system the notification remained in "Approval required" status. I was under the impression that this status is set automatically once the approval is completed. Initially when i started the development i had assumed that this task was also used to help in updating the data along with TS50000058. Since we are updating the data in background using certain function modules and BDC's i had removed this step in my custom WF.
I have solved the issue now but still there are some of the questions as given below. Please clarify these if you have any idea on this.
1. There are some hardcoded values like QN44, QN55, PMM4 that are passed to the business transaction. What are these values?
2. How is the system deciding the statuses on these values? Is there a place or table where these business transactions are linked to the Approval texts? 
3. I searched through table TJ01T and found list of business transactions for Notification but i just get an error (in WF log) if i try to use them!!!
Thanks,
Prasath N

Why OWB Execution status report showing wrong status ?

Hi,
I created a process flow. It executed successfuly.
In that process flow I used 4 mappings. and the data is updated in 4 tables. In all the tables data updated successfully.
But the execution status is showing that , in one table the records inserted are 0.
I verified in the Runtime Assistant. There it shows correctly.
Why it is showing like that?
Any suggestions are welcome.
Thanks and regards
Gowtham Sen.

I've seen this often here. Check the log files on the OWB server and you may see that control center service was force restarted. I have an SR opened with Oracle on this.
The symptoms I've seen are:
1. The mapping reports success
2. Some or all of the levels of the mapping show "*" for the statistics
3. The mapping completion time shows the mapping start time.

PO showing wrong status

Hi : I have setup approval for PO. I have one PO in the worklist, it shows PO awaiting approval and whenni go and check detials in PO for the Approval view on the Header Data tab, it says No Approval Required. which is correct as per our setting. could you please tell me why I am getting different statuses and help me in resloving it.
Thanks
RK

Hi RK,
Please read this link.
Re: PO Status is Awaiting Approval when no Approval Required
thanks,
Raju

Em showing wrong status

Hi,
RDBMS : 10.2
OS : Centos 5
I can successfully start and stop emctl service. emctl start/stop dbconsole is showing no error. But when I hit the em URL , it is showing db and listener status as down. But they are working :(
can you please tell how to correct this behavior ?

database is working perfectly. No error generated.
If on EM page, I may process to startup, it takes all the credentials and on next screen detect oracle database as up and running. When I click return, it takes me to the same screen showing everything status down.

Wrong Status in SPAM

Similar Messages

Maybe you are looking for