Wrong Target Display iMac

I am using a Mid-2010 27 inch iMac as my main machine and I also have a 21.5 inch 2009 Late-2009 iMac. I'd like to use the 27 inch as my main computer with the 21 inch as the secondary display, so I purchased a double male ended Mini Display cable, whenever I plug them in, the 27 inch iMac becomes the secondary display to the 21 inch, I hit Command-F2 on the 27 and it goes back to normal, but then I hit Command-F2 on the 21 and nothing happens. It seems as if I'm only able to make my 27 iMac an additional screen for my 21 inch, but not the other way around. Any ideas? Thanks in advance!

Your 21" 2009 iMac is not capable of Target Display Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support

Similar Messages

  • Target Display Mode: Lenovo T420 DisplayPort to iMac (2nd screen) does not work

    Configuration:
    - Laptop Lenovo T420, DisplayPort, Windows 8.1
    - DisplayPort cable, Adapter to Mini DisplayPort
    - iMac (Intel, 27-inch, Mid 2011) as 2nd screen, connected via Mini DisplayPort Adapter, Mavericks OSX 10.9.1
    Problem:
    - iMac does not start Target Display Mode
    - Even cannot be forced via Cmd + F2 or Cmd - Shift - F2
    Test:
    - Lenovo via DisplayPort cable to 2nd screen works fine
    - Can switch between PC only, Duplicate, Extend display
    Question:
    - What is wrong?
    - What can be done to idenify the root cause?
    Kind regards, Marcel.

    Hello Marcel,
    It sounds like you are wanting to use the iMac in Target Display mode with your PC. Target Display mode is a feature that is supported from one Mac to another Mac according to this article:
    OS X Mavericks: Use another Mac as a display
    http://support.apple.com/kb/PH14264
    Target Display Mode lets you use a Mac as the external display for another, “primary” Mac.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • 2010 iMac Target Display Mode not working

    I'm trying to use my 27" 2010 iMac with OS X 10.7.5 as the display for my Power Mac G4 using Target Display Mode, but command+F2 doesn't do anything. I have it hooked up from the G4 using a DVI -> Mini Displayport adapter into the iMac. I've tried having the G4 plugged into the iMac, shutting both down, booting the G4 first and then the iMac. I've tried repairing my disk permissions on the iMac. I'm using an Apple keyboard and have tried both a wireless and USB keyboard, still no luck. Is what I'm attempting impossible or am I doing something wrong?

    Target Display is working on the iMac, but by default, the MacBook Air uses the external display (in this case, the iMac) as an extended display, so you have to drag the windows to the right of the display of your MacBook Air and they will appear on your iMac.
    If you want to show the same on both MacBook Air and iMac displays, see "Video mirroring" > http://support.apple.com/kb/HT5019

  • Dec 2012 iMac using bluetooth keyboard will not exit Target Display Mode

    Hi! I have a new 27" iMac that I would like to use as a second monitor for my work laptop a late 2011 15" MBP. iMac is on 10.8.3 and Mac Book Pro on 10.7.5. Connected via a thunderbolt cable.
    I can toggle on Target Display Mode using the command-F2 keys on my bluetooth keyboard connected to the iMac. If I understand directions correctly, I should use the same keys and keyboard to toggle off – but it doesn't work. I'm able to work around by putting MBP to sleep, which exits the iMac out of TDM.
    I can use the work around, but...
    1) it's annoying.
    2) If I can't use the bluetooth keyboard to toggle, it would be nice to connect it to the MBP for use while in TMD. Unfortunately, the bluetooth keyboard is undiscoverable, presumably because it's still connected to the iMac.
    I wonder:
    Am I doing something wrong trying to toggle out of TMD using bluetooth keyboard?
    or
    Is there a way to enter iMac into TMD without using keyboard command? Maybe System Preferences?
    Thanks for your help in advance!

    Here's the solution: I had the same problem using my 27" iMac as an external display.  The issue is, when you go to Target Display mode, your target computer, the iMac 27" locks the screen with your password. 
    To switch off TDM, type your password in on the iMac keyboard and press the enter key.
    Now press COMMAND - F2 and the displays with switch back to two separate displays.  :-)
    I had to think like a computer to figure that out but it makes sense.
    I also have the disappearing mouse pointer and have not figured that one out.  I did all the software updates and I did not have this problem until I upgraded to Lion.  It is definitely a software issue.  I might have to open a case with Apple support.  Not happy.
    Derrick

  • Apple Mini DVI to DVI Adapter to connect Win7 tower to iMac / Target Display Mode

    I currently run Windows on bootcamp on the iMac (Mid-2011), although the tasks I perform (3D modelling, rendering and such) cause the Mac to get very hot, and as a result hae a slight burn mark on the LED LCD screen.
    I am buying a Windows machine, and am to uninstall bootcamp and use the Mac purely for OSX, but use the iMac screen as a monitor for the tower using Target Display Mode. My issue is - the Windows 7 tower only has DVI output. And as I understand, the Mid-2011 iMac only supports Target Display Mode via a thunderbolt cable.
    My question is - Will the Apple Mini DVI to DVI adapter allow me to connect the DVI-only tower to the iMac? Thanks in advance x

    Oh, I should mention also that the iMac is the 27" model. Mid-2011 3.4Ghz Intel Core i7 with 4GB RAM and 1TB Harddrive. And ATI HD5450 1GB Graphics.

  • Can windows 8.1 in boot Camp display in target display mode on an IMac?

    I have given up on Windows 7 running in Boot Camp on my 15" MacBook Pro and displaying it on my 27" IMac via thunderbolt and Target Display Mode. 
    The FAQ concerning Target Dsiplay Mode farily clearly says Windows 7 won't work. 
    But it  does not say Windows 8.1 will or will not drive Target Display Mode via thunderbolt.
    see:  http://support.apple.com/kb/HT5219, question 29
    Has anyone found that running Windows 8.1 in BootCamp on a MacBook Pro Retina mid 2012 will display via a thunderbolt cable in to Target Display Mode on a late 2013 IMac 27"? 
    I don't want to go to the trouble of installing Windows 8.1 and trashing my otherwise functional Windows 7 Boot Camp installation unless it is going to display properly on my late 2013 27" IMac running OSX 10.9.3 via thunderbolt.
    Thanks in advance!

    no, tdm doesn't work under bootcamp regardless of which windows is being used, imho i don't think it will ever work under bootcamp

  • TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

    Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

    Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

  • How can I use my 27" iMac (2010) as an additional display to my Windows 7 PC (target display mode)?

    So I have purchased a windows machines so that I can play all my favourite games on, and it's not so much a problem rather I have a 27" iMac that I would like to use as an additional monitor for said games.
    I have had a look at this article on using the iMac as a display for another computer and things looked promising. I think I need a bit of help getting there though as I can't find definitively anything online to tell me exactly what I need. Most stuff talks about connecting other Apple computers that have mini display ports.
    My PC's video card is an nVidia Geforce GTX 650 Ti that sports 2 DVI ports and a mini HDMI port (adaptor to full HDMI was included). The iMac has a mini display port. I went out and got a HDMI cable and Moshi Mini DisplayPort to HDMI Adapter (with audio) to try to use the iMac as the additional display. I connected the PC with [a generic] HDMI cable to the adaptor which ran to the iMac and went through the appropriate steps (ie. pressing CMD + F2) to initiate target display mode. Nothing happened.
    I have read that other people with different situations tried an SMC reset, but this didn't work for me either.
    At this stage I wanted to see if the DVI port would do anything, or perhaps looking at a particular kind of HDMI cable, but wanted to see what the community can offer up as advice.
    Any assistance would be greatly appreciated.
    Thank you.

    Hi,
    have a read here http://support.apple.com/kb/HT3924
    Regards
    Stefan

  • IMac 27" Target DIsplay Mode + Answer to Windows 7 Boot Camp Install

    First, I'd like to address the handful of complaints I've come across about installing Windows 7 via Boot Camp on the new 27"iMac.
    The issue of the screen going blank when almost done has an easy albeit annoying answer. Simply connect the iMac to an external display, I used a small vga lcd with the Mini DisplayPort to VGA adapter. When the iMac's screen goes black the external lcd will continue, and when Windows 7 starts up it will download the updated ATI drivers. From there alls well.
    Second, my problem.
    Target Display Mode is a great feature. It worked great when I first used it, and it works great now except for the fact that the Command+F2 button combination stopped working. I have to manually unplug my MacBook Pro in order to get my iMac's original screen up. At first Command+F2 would allow me to switch back and forth, and now it does nothing.
    Any suggestions?

    Well, the usual first things to try for a display-related issue are
    Reset PRAM
    http://support.apple.com/kb/HT1379
    and of that does not help, reset SMC
    http://support.apple.com/kb/HT1543
    which is basically unplugging the iMac from power and reconnecting it following the precise procedure.
    Note: After resetting PRAM, you should go to System Preferences +Startup Disk+ pane to make sure your internal drive is selected (highlighted) as the startup disk.

  • Target Display Mode - Connecting pre-Thunderbolt Macbook Air to Thunderbolt iMac.

    I want to use Target Display Mode in order to display my late-2010 Macbook Air (pre-Thunderbolt) to a Thunderbolt-based iMac. Is there an adapter solution to connect, say, a mini display port + USB port on the MB Air to the iMac Thunderbolt port, such that TDM would work?

    Depends upon the situation.  Take a look at this blog:
    http://blog.macsales.com/10899-target-display-mode-and-thunderbolt

  • Target Display Mode not working iMac 27(2012) Bootcamp to iMac 27(2013)

    Hi All,
    I recently purchased an iMac 27" 2013 which replaced my iMac 27" 2010.
    ===============
    PREVIOUS SETUP
    ===============
    (1) iMac 27" 2012 - Running Windows 8.1
    (2) iMac 27" 2010 - Running OS X Mavericks
    (1)+(2) were connected with a Mini-Display-Port cable.
    (1) was using (2) as external display while (2) was set to Target Display Mode using CMD+F2
    ==============
    CURRENT SETUP
    ==============
    (1) iMac 27" 2013 - Running Windows 8.1
    (2) iMac 27" 2012 - Running OS X Mavericks
    (1)+(2) are connected with Thunderbolt cable.
    (1) can't use (2) as external display anymore becuase CMD+F2 has no effect anymore on (2) in this scenario.
    If (1) and (2) are both running OS X all works as expected.
    I am aware about the support hint from Apple where they state TDM is not working under Bootcamp.
    And I agree, while booted into Windows Bootcamp this machine can't serve as external display. Makes sense because TDM is baked into OS X display drivers.
    Anyone had the same experience and came to a soltuion?
    Thanks,
    Martin

    "Apple has no plans to implement a client driver for Windows since there is no Thunderbolt SW stack available for Windows like there is for Display Port."
    That is a little bit funny since Gigabyte and other big companies have said that 2014 is the year that they are going to implement Thunderbolt in many motherboards.
    "GIGABYTE 7 series motherboards are the very first to offer fully certified dual onboard Thunderbolt™ ports. Capable of connecting up to 12 devices plus 3 digital displays simultaneously with breathtaking data transfer speeds that can transfer 1TB of data in only five minutes, GIGABYTE Thunderbolt™ motherboards offer the fastest connection interface on the desktop PC."
    Have you asked Apple about that? I dont understand why Apple is crippling Thunderbolt on their devices...

  • Target Display Mode iMac 27 mid 2011 with Mac Mini 2011 bootcamp

    Hello,
    I can't seem to use Target Display Mode with Bootcamp.
    My configuration:
    Imac 27" mid 2011 with osx 10.8.4
    Mac Mini Server 2011 with osx 10.8.4, bootcamp 5 and Windows7
    Both are connected via Apple genuine Thunderbolt cable (2m).
    When I boot the Mac Mini into OSX then Target Display Mode works perfectly and I can see the osx installed on the Mac Mini on the iMac display.
    However, when I reboot the Mac Mini into Bootcamp (windows7 x64) I can't put the iMac in Targt Display Mode and get to see Windows 7 on my iMac screen.
    http://support.apple.com/kb/ht3924#8
    The following article says that this should work, however once I reboot osx on the Mac Mini the iMac leaves Target Display Mode immediatly and will not return to Target Display Mode.
    Any advice? I contacted Apple Support and a Sr. Enginner said it should be supported and he's checking with a higher tier.
    Thanks

    Yes, it does.
    (110549)

  • Target Display Mode on late 2013 27" iMac to mid 2010 27" Imac

    Hey guy's real strugling to make my 2010 imac become a display, When i connect my 2010 cinema display 23" everything works fine but the minute i try to enable the tdm function on the 2010 imac nothing happen. Like nothing I got the mini display to thunderbolt adapter but nothing happen with the imac.
    Any help or suggestion is very welcome.

    Target Display Mode 2009 & 2010 iMacs
    Target Display Mode And Thunderbolt
    iMac- How to use your iMac as a Target Display Mode display
    iMac (Mid 2011)- Target Display Mode does not work with Mini DisplayPort cable

  • HT3924 any HDMI converters available for iMac target display mode yet?

    Just got this bed with a pop-out TV, and I'm thinking about getting an iMac 27" to use instead of a TV. Problem is, I'll also want to attach an Apple TV or Freeview box to my iMac - so I can play content from my iPad / watch live TV from the freeview box. This would be technically possible with target display mode, except the Apple TV / Freeview box don't have mini display port output.
    Anyone know if there are HDMI to mini display port adapters available yet to facilitate this? From what I've read most of them only output from mini display port to hdmi, not the other way round.

    I have a Asus HD6570 2GB Graphics Card in that computer with HDMI out, DVI out, and VGA out. I have a Asus HD6570 2GB Graphics Card in that computer with HDMI out, DVI out, and VGA out.
    None of those will work.
    It has to have a Mini DisplayPort, not evn a Display port will work.
    ScreenRecycler...
    http://www.screenrecycler.com/ScreenRecycler.html

  • Mid 2010 27" IMac Target Display Mode has stopped working

    I have a 27" mid 2010 IMac, NOT the thunderbolt version, and have been using it in target display mode for my Mac Pro and 2010 Mac Mini with no problems.  I have used the Belkin cables, and routinely would switch between internal and external machines using Command-F2.  Worked like a champ for about 7 months.
    Today, with no obvious change, I cannot get the IMac to enter TDM.  This is true whether I use the Mac Mini or the Mac Pro, and is true using either of two Belkin Cables.
    I reset the PRAM and NVRAM on the IMac, but this made no difference.  I changed keyboards from my Bluetooth IMac keyboard to an Apple USB keyboard.  Again, no improvement.  I have rebooted the machine without benefit.  The IMac seems to function just fine in every other respect.
    Since I have no other monitor that supports the mini DisplayPort on the two other machines, I am dead in the water at this point.
    The machine is a mid 2010 27" IMac, OSX 10.6.7, 2.93Ghz I7 CPU, 16 Gb RAM, 480Gb SSD and has worked well for quite a few months.
    Any help will be appreciated.

    When the display only shows the background, it's working in extended desktop mode.  That's a logical extension of your desktop to the right of the MBP.  Drag an application off the MBP to the right and it will appear on the iMac.  When you close the lid of your MBP the iMac becomes the primary monitor in Clamshell mode.
    If you want to mirror the MBP to the iMac then press CMD F1, press again for extended desktop mode.  These settings are in System Preferences > Display > Arrangement tab.
    When the iMac is in Target display mode, you don't use the keyboard on the iMac.  Use the keyboard on the MBPro.

Maybe you are looking for

  • Trying to transfer soungs from old ipod to new ipod, received error from

    iTunes saying that "Some of the purchase items on ipod couldn't be transfer to itunes library because you're not authorized to play them on this computer" . That being said the computer is authorized already. When I go to authorize the computer I get

  • Information only on the first page

    Hi, How do I print a portion of the xml only on the first page of the invoice. I am assuming this portion that need to appear on the first page should be put into the footer. But how can I exit out of a loop that is populating the body of the first p

  • MacMini with Yosemite freezes on the login window

    Two of our MacMinis were frozen when we tried to wake them up from sleeping. Both Mac's have standard SW installion and original Apple HW. Usually the Mac has a good recovery of any files being open but on one a major document couldn't be recovered a

  • Where to begin? slideshow? album? homepage?

    I'm just learning how to use .mac, and I have about 10 pictures that I would like to share with friends - and rather than just e-mailing them, i'd like to put something together. I thought about doing a slideshow, which would be my first choice, but

  • HT4009 I cant purchase in-apps

    I cant purchase in-apps with my apple id