Wrong temps reported in clickbios and coretemp
Hi all,
I have noticed with my new system build that coretemp and clickbios occasionally will report the wrong temperatures for my processor: they display 91 degrees C. In coretemp this shows as "91C(?)" Has anyone else had this issue? I know the CPU is not that hot, and upon rebooting the issue usually goes away. System specs below:
# Intel 3960x overclocked to 4.5 GHz (all voltages set to auto)
# MSI X79-GD65 (D8) with v1.3 bios
# G.Skill F3-17000CL11-4GBZL x 8 sticks = 32 GB running at 1600 MHz (auto settings in bios)
# Nvidia Quadro FX 4600, 768MB ram
# OCZ Vertex 3 120GB boot drive, Seagate ST1000DM003-9YN1 1TB storage drive
# Windows 7 x64
# Corsair TX750W power supply
FWIW, the auto cpu voltage is set to 1.368V.
Thanks,
DrDet
This behavior has been noted by several users. In the last reply I had from MSI Tech Suppport, MSI & Intel are in communication with each other over what appears to be a CPU microcode problem. It also surprises me the Auto V. is setting 1.368v's with 1.35v's being the recommended industry limit for the LGA 2011 CPU, with a published absolute maximum of 1.400v's in Intel's latest product datasheet. Quite a bit lower than it's Sandy B. cousins. Anyway, it is being officially looked into, so all we can do is wait & see what develops.
Similar Messages
-
Vista/iTunes reports iPod corrupt (and Restore does not correct it)
I have a 16GB nano, a Dell laptop running Windows Vista Business Edition, and a home-built PC running Windows XP SP3. On the XP desktop machine, both Windows and iTunes work perfectly fine with the iPod. All is great.
On the Vista laptop, it's a no-go. Windows says there's a disk there, but only offers to format it (as if it's a new, unformatted disk; and if I let it, it reports a failure to format successfully). iTunes reports that it's corrupt and offers to restore it, but after restore process completes, it once again reports the problem and offers to restore it again. Interestingly, this iPod came formatted for Mac, and the restore process did/does successfully convert it to PC format. Only afterward, we're back to the usual error message.
I'm not sure if the issue is the laptop (and some funky USB hardware port thing), or if it's Vista (and some funky Vista software thing). Or, is it possible there's really something wrong with my iPod and XP overlooks it?
I've performed the 5 R's, and tried a lot of uninstall/reinstall/update the install with USB devices and drivers, with no change. I'm not really certain how to proceed. My gut tells me the iPod's ok; but I'd like to be sure.
I'd mostly like to verify that: (a) my iPod is really fine - and either - (b) the laptop has a hardware issue - or - (c) Vista has a software issue. If I solve the laptop/Vista issue, that would be icing on the cake (I'm content to use the XP machine for iTunes), but it's not critical as long as I can feel confident the iPod's okay after all.
Let me know if there's anything else I can tell you, or if you have any suggestions.
Thank you!
James
Message was edited by: jamesmhebert (typos, and clarification)It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
If necessary, post the results from the HD test and we'll figure out where to go from there.
B-rock -
Generate report on server and open it in a client report viewer, possible?
Hi guys,
We are new to Crystal report so please feel free to correct me if I had the idea wrong.
Our client-server application was written in a language other than Java and Dot Net. We want to use Java and Crystal SDKs to glue our application, the Crystal Report Server and Report Viewers together...
We are planning to collect report parameters within the client of our own application (due to attributes of our application and parameters we need) and then pass it back to the server side (our server, not Crystal server). Our server will then generate a XML file and run a Java program talks to the Crystal Report Server (XI R2) to run a report with the XML file and store the result on the server side. Then it will send a message back to the client, tells it the report has been generated. Then our client program will fire up the Crystal Report Viewer to view the report.
I was just wondering if it is possible to do what we wanted with Java SDKs that are available to us (JRC, Viewer SDK and Report Application Server SDK)? Has anybody done the similar thing before?
Also we would like to have some drill-down reports with XML as report data source. Would it be possible to intersect drill-down event fired in a report viewer(Java and Web)? I would imagine the report viewer will then call some Java program talk to our application server to generate XML file for the drill-down section and then some how programmatically tell the viewer to display the drilled down report with the XML file just generated... Will my design work? Any advice or thought will be highly appreciated.
Thank you,
DongIf you are using Crystal Reports Server, you can do almost everything you want using the RAS Java SDK. RAS will accept XML as a runtime datasource, and then manipulate the report at the server end and render the report in the DHTML viewer. If you want your client to call the viewer, have it call the JSP file that the viewer code has been added to.
The RAS SDK doesn't have any ability to intercept or manipulate drill down events, so the second part of what you would like to do may not be possible. Because our viewers are dynamically generated there is no source code to look at or use to make changes to the viewer outside of what is available in the viewer SDK.
Below is a link to the developer library with the Report Application Server SDK that has sample code and tutorials to do what you need to do, as well as the Java Docs of the RAS SDK.
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm -
Report on Position and the corresponding Job
Dear Friends,
There were some positions which are wrongly assigned to some Jobs. For e.g.: an Account Superintendent position is assigned to a Stenographer Job. So we would like to find out which position is assigned to which job.
Is there any report through which we can obtain the positions and to which Job they are assigned to. We have 900 odd positions. So if we get those positions and their corresponding job then we can check whether they are correctly assigned or not.
It would be great if anyone could help me in this regard.
Thanks
NelsonHi Viishwa,
Just as the error message said, “The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database”. Because the remote data source support feature is only
supported in Enterprise, Business Intelligence and Standard editions. Express with Advanced Services can only use Express with Advanced Services (local only) as the Database Engine instance to host the database.
For more information about Features Supported by the Editions of SQL Server 2014, please see:
http://msdn.microsoft.com/en-us/library/cc645993.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
If image file not exist in image path crystal report not open and give me exception error problem
Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as belowFirst: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP] -
Simulair report for FBL5N and FBL1N for new general ledger on segment level
We are working with segments in new G/L ledger. We want to run a open item report where we can combine customers and vendors by segment. The vendors and customers are linked in the master data. In the "old" reports FBL5N and FBL1N you can do this but not by segment.I found the following report on segment level:
- S_PCO_36000218 - Receivables: Segment
- S_PCO_36000219 - Payables: Segment
What I'm missing is to run 1 report for Customers and vendors. What I'm missing to is that there are only some fields available on line item level. (I like to have invoice number, documentype,.......)
Is there a standard report for this in new genaral leger?
Is it possible to ad additional field to th list viewer.What is this user license type? All financial transactions need professional license.
Thanks,
Gordon -
Excel Download of a Web SAP BW Report asks userid and password.please help
Dear BW folks,
Issue: When I run a specific SAP BW Report from Web and download the same into excel & csv.
When I open the excel file downloaded, it asks me user name and password to enter. csv file downloaded doesn't ask.
The report has 0cust_sales hierarchy and SBU hierarchy.
Is there any thing to do with these hierarchies that the excel download is asking user name and password?
Please help me out!!!!! This report needs to be downloaded into excel sent to my manager.....
Regards
PavanHi Pavan
It is possible,please refer the below link
Report execution without prompting user id
Providing un-secured access to a web report.
Also, for the time being, you can run the query and save a workbook and sent across
These will resolve the issue
Thanks
Pavan Agarwal -
Crystal Report 2008 SP3 and BO XI 3.1 conflict
Hi every body,
We have a BOE system:
BO XI 3.1
Oracle db 10g
All running successful and can create some types of WebI report.
But we also want reports with Crystal Report.
1> So we install Crystal Report 2008 SP3 (without knowing the conflict error between BO XI 3.1 and Crystal Report 2008 SP3 and overwrite some .dll file). After installing, we can not create WebI report any more. And a error message box display: "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll ".
2> We uninstall Crystal Report SP3. But this is not the solution. Still error because of missing .dll files.
3> We open BO XI 3.1 setup and repair BO XI 3.1. Even we uninstall BO XI 3.1, delete all of its components and delete in regedit key. We install BO XI 3.1 again. Now we have full .dll file, not missing them any more. But when we open universe and click on Table browser, cannot fetching any tables.
We set rights for Oracle DB user again. But still error: cannot fetching.
4> We searched the solution for this problem on the internet. But not worked, no answer.
Can somebody help me bring back the BOE system state again ? pls :"<
T______THi Paul,
I hope I read your question right!
Yes, It is possible to run XIR2 and 3.1 on the same server although it's not recommended by BO. You will need to make sure they are both pointing to different CMS databases and different FRS repositories, like you already mentioned you will need to specify different ports for the CMS db and Tomcat.
Why not uninstall Business Objects XI R2 in your BO development environment or a spare server (if you have one), and do a clean install of XI 3.1 SP3.
Tip: If you were already having performance issues with your XI R2 environment, I would seriously consider upgrading the hardware. XI 3.1 needs a bit more RAM and CPU than XI R2
Regards
Rim Geurts -
Unable to schedule a report to email and print
I have been working on a task to both print and email a report to recipients whose email addresses are obtained at runtime. So far I am able to email the report as a PDF attachment, however, I am not able to get the report to print. I have three thoughts as to why the report is not printing.
1. The printer is in a subdomain under the domain where InfoView and the Enterprise server reside.
2. It is not possible to schedule a report for both an SMTP and print destination simultaneously.
3. The format is causing an issue in printing - the SDK API states "Printer is a report format specific destination and can only be used when the report object is a Crystal Report."
I have looked at the scheduled report in InfoView and can see that the print settings I am passing are correctly set for the scheduled instance. Does anyone know if there is a problem with trying to schedule printing and email at the same time, or if the report format must be .rpt?
Below is my code. Thank you for your time.
String query = "Select SI_ID, SI_NAME, SI_PROCESSINFO, SI_SCHEDULEINFO, SI_SCHEDULE_STATUS From CI_INFOOBJECTS Where SI_ID=" + reportId;
IInfoObjects results = null;
ISchedulingInfo schedulingInfo = null;
try {
results = iStore.query(query);
} catch( SDKException sdke ){
logger.error(sdke);
if( !results.isEmpty() ){
// get the actual report object from collection and set scheduling information
IInfoObject report = (IInfoObject)results.get(0);
schedulingInfo = report.getSchedulingInfo();
schedulingInfo.setType(CeScheduleType.ONCE);
schedulingInfo.setRightNow(true);
schedulingInfo.setRetriesAllowed(3);
try {
Set<String> keys = destinations.keySet();
Iterator i = keys.iterator();
while( i.hasNext() ){
String dest = (String) i.next();
if(dest.equals(CrystalDestinations.EMAIL)){
// get the destination object and set it to SMTP plugin
List emailAddress = destinations.get(CrystalDestinations.EMAIL);
IDestination destinationObject = schedulingInfo.getDestination();
destinationObject.setName("CrystalEnterprise.SMTP");
IDestinationPlugin smtpPlugin = (IDestinationPlugin) iStore.query("SELECT * FROM CI_SYSTEMOBJECTS WHERE SI_PARENTID = 29 AND SI_NAME='CrystalEnterprise.SMTP'").get(0);
ISMTPOptions smtpOptions = (ISMTPOptions) smtpPlugin.getScheduleOptions();
smtpOptions.setDomainName( emailDomain );
smtpOptions.setServerName( smtpHost );
smtpOptions.setSMTPUserName( smtpUser );
smtpOptions.setSMTPPassword( smtpPass );
smtpOptions.setSubject( "Email for report " + report.getTitle() );
smtpOptions.setMessage( "This is the message body" );
smtpOptions.setSenderAddress( smtpUser + "@cdrh.fda.gov" );
smtpOptions.setSMTPAuthenticationType( ISMTPOptions.CeSMTPAuthentication.LOGIN );
for(int j = 0; j < emailAddress.size(); j++ ){
smtpOptions.getToAddresses().add( emailAddress.get(j) );
destinationObject.setFromPlugin( smtpPlugin );
} else if ( dest.equals(CrystalDestinations.PRINT) ){
List printers = destinations.get( CrystalDestinations.PRINT );
IReportPrinterOptions printerOptions = ((IReport)report).getReportPrinterOptions();
printerOptions.setCopies(1);
printerOptions.setEnabled(false);
printerOptions.setPrinterName( (String)printers.get(0) );
printerOptions.setPageLayout(IReportPrinterOptions.CeReportLayout.USE_SPECIFIED_PRINTER_SETTING);
List reportPrompts = ((IReport)report).getReportParameters();
for(int j = 0; j < reportPrompts.size(); j++){
IReportParameter prompt = (IReportParameter) reportPrompts.get(j);
if(prompt.getParameterName().equals(mdrParamName)){
IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
v.setValue(reportParameters.get(mdrParamName));
} else if(prompt.getParameterName().equals(addressParamName)){
IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
v.setValue(reportParameters.get(addressParamName));
IReportFormatOptions format = ( (IReport) report).getReportFormatOptions();
format.setFormat(IReportFormatOptions.CeReportFormat.PDF);
iStore.schedule( results );Hi Jason,
Based on your code, I could not tell if you were scheduling a Crystal Report or a WebI document.
Regardless, what I would suggest is you try scheduling the report/document on InfoView.
Once you schedule it on InfoView, you can retrieve the instance on Query Builder (or through code) and compare the properties that are being set through InfoView and the one you set through your code.
This should indicate if you are missing some properies or have set some properties incorrectly.
Hope this helps.
Regards,
Dan -
Need Report in Training and Event Management
Dear All,
I want a report in Training and Event Management consisting of attendee name and training date and venue details, price for training event and would like to know any standard report available.
Kindly let me know the std report name.
Thanks and Regards
Suresh,VHi!
for all reports try T-code : SAP1 ( Report Selection ) & SAP2 ( Info catalog ) here you will get all the standard reports available for that module .
Regards
Sheetal
Edited by: sheetal Gulati on May 14, 2009 7:51 AM -
Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
ThanksIt is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.
-
App store reports "Pinball HD and 11 other apps cannot be purchased at this time"..... This occurs whenever I log into the app store. I have already purchased this app (and presumably the 11 others as well). I believe this started when it showed up as an app I should update (for free).
My wife and I share this iPad and we have apps purchased under two different store accounts on this machine. I have tried to log off and sign in with her account and then check updates but with either account I am told that all apps are up to date. All of our credit card info is current. Any clues?Already on Automatic..... :(
This is an iPad 1 - I've had it since it first came out (ordered directly from Apple). Lots of apps and purchases over the years. My wife got her own WiFi only iPad shortly after mine as she fell in love with it and I don't share well. ;) This only started about 7-10 days ago. I did not update to iOs 5.1 until last night so this predates that. My concern is that when the iPad 3 arrives next Friday that this will transfer over.
Ever since my wife received her own iPad our purchases are pretty much separate. -
Did a clean install 10.9.4. on a Apple Stock 1TB Fusion Hard Drive. When I run "diskutil list" via Terminal, everything is wrong. I have "EFI" and "apple Boot Boot OSX" in every dev/disk** Everything is out of place, How can I repair? Im willing too reformat if need be, however thats what I did in the first place. Any help would be much appreciated, thank you.
I know this cannot be correct
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 999.3 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion *1.1 TB disk2
/dev/disk7
#: TYPE NAME SIZE IDENTIFIER
0: *121.9 GB disk7It appears as if my startup disk has been reversed and not using the fusion ssd portion as it should. At least its now reversed as to what it used to be originally before. the 128gb ssd used to be on top. Is my mac booting fusion correctly? Thank you for responding as I was about to reformat.
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group C2619AFE-0EB5-4721-8C50-3F3DBA520D1B
=========================================================
Name: fusion
Status: Online
Size: 1120333979648 B (1.1 TB)
Free Space: 114688 B (114.7 KB)
|
+-< Physical Volume 583AAEA9-E333-4A83-9BE3-E937396E9248
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 120988852224 B (121.0 GB)
|
+-< Physical Volume B0C1CB16-D46F-4387-A679-B55392BB7934
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 999345127424 B (999.3 GB)
|
+-> Logical Volume Family FB42B9F4-CB77-4162-831B-7DCB7816E760
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume C0B8479B-C51C-45BF-B59B-1AA5DF3A3B83
Disk: disk2
Status: Online
Size (Total): 1111826497536 B (1.1 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Fusion
Volume Name: Fusion
Content Hint: Apple_HFS
FoHeazys-Mac-mini:~ FoHeazy$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 999.3 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion *1.1 TB disk2 -
When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified. There is nothing wrong with my apple id and I do not want to change it.Any suggestions?
Debi....
Try "resetting" your Apple ID password > Apple - My Apple -
SCCM Report for Applicable and Installed Updates Collection Wise
Hi All, I was looking for a report on Applicable and Installed Updates Collection Wise and got this below query on the Internet and want to create a SCCM report with this below query. How to make this query working in SCCM report?
Do I need to add prompts, if yes please guide me on adding prompts.
SELECT
DISTINCT
SYS.Name0
AS [Server Name], SIS.SMS_Installed_Sites0 AS [Site Code], UCS.Status AS [Patch Status Code],
CASE WHEN UCS.Status = '2' THEN 'Applicable' WHEN UCS.Status = '3' THEN 'Installed' ELSE '' END AS 'Patch Status', UI.BulletinID AS [Bulletin ID],
UI
.ArticleID AS [Article ID], UI.
Title
FROM
v_R_System AS SYS LEFT OUTER
JOIN
v_Update_ComplianceStatusAll
AS UCS ON SYS.ResourceID = UCS.ResourceID INNER
JOIN
v_UpdateInfo
AS UI ON UCS.CI_ID = UI.CI_ID INNER
JOIN
v_RA_System_SMSInstalledSites
AS SIS ON SYS.ResourceID = SIS.
ResourceID
WHERE
(UCS.Status IN ('2', '3')) AND (UI.ArticleID IN ('972270', '974392', '973904', '969947')) AND (SYS.Name0
IN
(SELECT DISTINCT v_FullCollectionMembership.
Name
FROM v_FullCollectionMembership INNER
JOIN
v_R_System
ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID AND v_R_System.Active0 = 1 AND
v_FullCollectionMembership
.CollectionID IN ('Collection ID'
ORDER
BY
[Patch Status Code]Yes it can be done and please run the query which i have shared in the thread
I again pasted the query for you below..
SELECT DISTINCT
SYS.Name0 AS [Server Name], CASE WHEN UCS.Status = '2' THEN 'Applicable' WHEN UCS.Status = '3' THEN 'Installed' ELSE '' END AS 'Patch Status',
UI.BulletinID AS [Bulletin ID], UI.ArticleID AS [Article ID], UI.Title
FROM v_R_System AS SYS LEFT OUTER JOIN
v_Update_ComplianceStatusAll
AS UCS ON SYS.ResourceID = UCS.ResourceID INNER JOIN
v_UpdateInfo AS UI ON UCS.CI_ID
= UI.CI_ID
WHERE (UCS.Status IN ('2', '3')) AND (SYS.Name0 IN (SELECT DISTINCT v_FullCollectionMembership.Name
FROM v_FullCollectionMembership INNER JOIN
v_R_System ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID AND v_R_System.Active0 = 1 AND
v_FullCollectionMembership.CollectionID
IN ('XXX00000')))
Kamala kannan.c| Please remember to click “Mark as Answer” or Vote as Helpful if its helpful for you. |Disclaimer: This posting is provided with no warranties and confers no rights
Maybe you are looking for
-
How to create a form that people can fill out
I'm creating forms using Adobe Acrobat XI Pro with the goal being to save the form on a network drive so users may access the form, fill out the form fields and save the file. Currently, users are not able to complete the form; it requires them to
-
How to get back to regular arrange view after double clicking on a rex file
Hi. How do I get back to the regular arrange view where I can see all of my tracks in the arrange window. I had double clicked on one of the tracks which was a rex file. I wanted to see what the slices looked like. Doing so just brought me to a new a
-
Oracle AVDF Database Firewall - Logs
Hi all, We are using Oracle Audit Vault & Database Firewall 12.1.0. We are having some issues and we are trying to find log files on the Database Firewall Server (OS). We do know where logs are located in Audit Vault Server, we just need to find out
-
Hello,Team I want to use CFL (object-id =171 emp details) in matrix column. It is not getting copied values from CFL into matrix cell i used to do in normal textbox(not in matrix) but i dont know how to do with matrix i trie like this. If oCFL.Uniq
-
Load a VI (including TestStand API) in TestStand
He, I'd like to load a VI in TestStand without LabVIEW. LabVIEW Version 8.5 TestStand Version 4.0 The PC with TestStand just have LabVIEW Runtime Engine 8.5, and the VI is used to import data in station globals; Also, This VI calls TestStand API and