Wrong u2018Last Data Updateu2019 is displayed in the reports

Hi
We have a problem with the u2018Last Data Updateu2019 date that is displayed in some of our reports that are linked to a specific Multiprovider. The date is stuck on 2009-06-29 even thou the data is updated every day. The Multiprovider is linked to 9 different infocubes of which 5 are updated on a daily basis. The other 4 are updated once a month or so. The date was displayed correctly in the reports up until 2009-06-29. What happened that day was that we transported a re-activation of the cubes and for some reason that caused a problem for the u2018Last Data Updateu2019 date. Some threads suggest that it is the date from the request that were loaded the longest time ago that is displayed but this is obviously not the case here. There is a Link: [Similar thread|Query element - "Last Data Update:" for MultiProviders; that mentions Link: [SAP Note 993622|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler] .
Anyone who has an idea of what I should do? / Mats

Hi
Nice to see that someone is working on a sturday night About your reply, that just cant be the case here or mabye we have made som abjustments to the standard i-View that affects the origin of the 'Last data update' date. The Multiprovider containes an Infocube that was last updated 2007-11-16 so according to your theory that should be the date that is displayed, but it is not. I'm quite conviced that it has someting to do with the transport that went in to production that day, but what I did was that I unchecked the 'Compress aggregates after rollup' checkbox on some of the cubes. But mabye we had some unwanted changes in our developmentsystem that affected the cubes in some way and that accidently came along with the transport or something like that. Any other suggestions? / Mats

Similar Messages

  • Latest Version data to be displayed in the report

    Hi,
    We are maintaining Version as a Char in the Cube. While displaying data in BEx report I need to display latest version data based on the 2 Info Objects. (These 2 Info Objects are keys..say Project, Its sequence Number).
    EX: Proj     SQ Version
         123        1       v1
         123        1       v2
         131        1       v1
                     Here I need to display only 2 & 3rd records         123        1       v2 ,     131        1        v1.
    PLease suggest me what is the best way to achieve this in BEx.
    Thanks,
    Swathi

    Hi Swathi,
    Directly reading data form infocube using SELECT statement will be a tedious task as fact table stores only DIM ID's so it's better if you use FM RSDRI_INFOPROV_READ  to read data from infocube.
    Execute this FM in SE37 first and check how it works and then accordingly you can write code in EXIT to read data from cube.
    Regards,
    Durgesh.

  • Udf Data is not being displayed in the report

    Hi all,
    i have designed one report in which i am displaying some udf fields along with other system fields.
    i have not used any selection criteria.
    when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
    If i open sales order and press 'Shift-F2'  and update the document and now if i run report then i get that udf value in the report.
    why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
    pls suggest some solution.
    regsrds,
    Chetan.

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • SSRS tablix not be visible when no data is selected to display on the report

    In an SSRS 2008 r2 existing dashboard application, I display a tablix (as a header) based upon the following selection criteria:
    =iif(Len(First(Fields!CustomerNumber.Value, "Main")) = 0, true, false).
    The CustomerNumber value is passed between the various SSRS reports in the dashboard application. There are times when the Fields!CustomerNumber.Value is selected for a particular report and there is no detail data to display. What happens with the existing
    reports, is the space that would be allocated for the tablix is shown.
    When there is no data to display, there is a NoRowsmessage that can be displayed on the report.
    Basically when there are no detail records to display on the report, I would like the tablix report header not to display when there is no detail data for the report.
    Thus can you tell me how to code the tablix report header not to display when there is no detail data?

    Sorry, I overlooked Katherine's simple solution, partly because the header doesn't go away, it is just replaced with something that cannot be differentiated from the report background. Keep in mind that the space the tablix is in is still occupied by the
    tablix as you can see below:
    Sample report with no data and an empty rows message of "  ".
    Above is the same report without a no rows message but with the header row hidden using thisformula: =IIf(Count(1)>0, false, true). You can see that the space that the header normally occupies is collapsed away when hiding the header whereas the spaces
    ("  ") occupy that space when using the no rows message.
    "You will find a fortune, though it will not be the one you seek." -
    Blind Seer, O Brother Where Art Thou
    Please Mark posts as answers or helpful so that others may find the fortune they seek.

  • Siebel - BIP Issue: Data is not populating in the report

    Hi Guru's
    You have any idea why there's no output data in a section of the report? I generated the xml for a record from siebel and tested that with my updated template and it's working fine. All sections are populated. But when I tried to upload it in Siebel the template and the updated xlf (from generated xml) and run the report, one section of the report don't have populated data. It's pretty weird bip. In that section of the report that without populated data, this is the codes:
    <?for-each:/SiebelMessage/ListOfBipPubHlsIncidentIo/PubHlsIncident/ListOfHs1IncidentContact/Hs1IncidentContact?><?sort:Household2;'ascending';date-type='number'?><?sort:Role;'ascending';date-type='text'?>.................<?end for-each?>
    Need your thoughts.
    Thanks,
    JP
    Edited by: BIPnewbie on Nov 18, 2011 3:06 AM
    Edited by: BIPnewbie on Nov 18, 2011 3:06 AM

    HI,
    Give the same Selections in the list cube same as in Report and run see if there are any values coming in the Listcube.....If u r getting the values then you should get same in the Report....
    Check with the authorizations to view the data....
    Thanks/tarak

  • How to display % in the report results

    Hi Experts
    I my BW report i am calculacting % using Calculacted KF.
    I want to display "%" in the report
    Ex: 2.5 should be displayed as 2.5%
    How can i achieve this

    Hi,
        In formula -- u have to select the Percentage Functions - then u select the [%A] Percentage share funtion.
         It will display the calculated value with percentage like ,50%.
    Regards
    RP

  • Please solve  Radio buttons (when selected) will then display on the report

    Each of these new Radio buttons (when selected) will then display on the report in the same locations, which is after the existing columns.
    Check boxes are by default checked.
    When the 1st radio button is selected then a new column will be displayed in the ALV output
    Next to A.
    Like wise when 2nd radio button selected then a new column will be displayed in the ALV output next to B.
    Like wise the ALV output is displayed.
    A   is a checkbox
    B  is a checkbox
    C   is a checkbox
    D   is a checkbox
    1   is a radio button                         
    2   is a radio button      
    3  is a radio button
    4   is a radio button

    while populating fieldcatalog itself u include these condition....
    if Pradiobutton = 'X'.
    *--populate field catalog for field u want in specified position....
    endif.
    similarly u proceed for other fields and other condition

  • Last GR date and lat GI date to be developed in the report

    HI,
    I want last GR date and last GI date to be developed in the report. I wl take the data from CKM3N.
    Is there any easy way how to go about it?
    Regards,

    Hi there
    1. Last GR date,If the material is a Batch amanged material you can get the last Gr date from the Table: MCHA-(Field) LWEDT..
    if the material is not batch manged,, Hope we can ref the MSEG based on the Movement types( Inward )/Material/Plant/Location for the last GR..
    2. For the last GI date- Same we can ref the  MSEG based on the Movement types( Outward )/Material/Plant/Location for the last GI..
    Hope it helps,,
    Thanks
    Senthil

  • Total time taken for the quiz needs to be displayed in the report

    Hi,
    I would want tthe total time taken for the quiz to be displayed in the report...Let me know if its possible

    Hi,
    Please try this.
    Define three user variables - StartTime, EndTime and Duration.
    At the start of the quiz ('On Slide Enter' of the first Question Slide). have an advanced action with the following actions.
    Assign: StartTime with cpInfoElapsedTimeMS  
    Continue
    At the end of the quiz ('On Success' or 'On Failure' of the last Question Slide or 'On Slide Enter' of Result Slide), have this advanced action.
    Assign: EndTime with cpInfoElapsedTimeMS
    Expression: Duration = EndTime - StartTime
    Expression: Duration = Duration / 1000
    Continue
    The variable 'Duration' will have the time taken by the user for the Quiz in seconds.
    Let me know if you have any queries.
    Thanks,
    Thejas

  • Data is not getting displayed in the report from an Infoset.

    Hi All,
    I am having a report  based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
    While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
    Could anyone please suggest why the data is not getting displayed in the query designer.
    Thanks & Regards,
    A.V.N.Rao

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • Run data not being displayed in the data view tab following a run

    Recently I had some engineerings troubleshooting an issue with our test setup and since then, they run data is not automatically displayed in the dataview tab.  I am now having to drag it over from the project documentation tab.  I am sure there is a quick fix.  What is it?  Also, how can I password protect to prevent this type of issue in the future?

    Benbrax wrote:
    Recently I had some engineerings troubleshooting an issue with our test setup and since then, they run data is not automatically displayed in the dataview tab.  I am now having to drag it over from the project documentation tab.  I am sure there is a quick fix.  What is it?  Also, how can I password protect to prevent this type of issue in the future?
    So they changed something?  You don't have a backup of the software, nor any kind of software control?  Where I work, you can't even run modified code on a production unit, else you just created an expensive "engineering unit."  Could be they deleted just one data wire and it may take you hours to find it.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • Date not being displayed in the custom format

    Hi ,
      I have a problem wherein i am unable to change the format of the date.
    I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
    I have binded date from the context, used the Current Date field provided by SAP.  Nothing works.
    Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
    Please suggest as to what the issue could be.
    Thanks,
    Soumya.

    Hi All,
    Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
    data: v_int_date like sy-datum,
            v_ext_date(10).
    v_int_date = '20110201'
    write v_int_date to v_ext_date MM/DD/YYYY.
    Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
    Is there any solution for this? How can I 'override' defaults in the SAP User Master?
    Thanks,
    Mahesh

  • Master data is not getting displayed in the Report in Quality

    HI Experts,
    I have ZESP_Num as master for my transaction data.
    I have loaded the data in the Development and designed and checked my report. It is working fine.
    But after moving it to Quality. My report is not getting the master data.
    When I try to do right click manage ZESP_Num.
    I'm getting message like this.
    The data from the InfoProvider ZESP_NUM involved could not be checked
    Message no. DBMAN242
    Diagnosis
    A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
    Can anyone plz help me.
    Thanks

    Hi,
    Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
    Hope helpful.
    Regards,
    RAO

  • Data displayed on the report in disc plus when used "GROUP BY"

    Hi,
    I have created a cusom folder, in which the query has group by on 3 columns. So the report in Discoverer plus is showing as
    Accounting Period     Market      Account     name,     Total billed
    200812     xyz     12345     xxxxx,     $12,345.00
              yyyyy     $12,345.00
                   zzzzzz     $13,985.00
                   aaaaa     $18900.00
    200812     abc     12345     xxxxx,     <$56,789.00>
    200901     xyz     12345     xxxxx     $12,345.00
    200901     ghf     12345     xxxxx     $12,345.00
    200901     abc     12345     xxxxx     <$56,789.00>
    200902     xyz     12345     xxxxx     $12,345.00
                   qqqqq     $12,345.00
    200902     abc     12345     xxxxx     <$56,789.00>
    but the user want to see data in each row, all the rows should be populated.
    Is there a way I can show that in the report?
    Thanks,
    Srini
    Edited by: user10593912 on Jul 9, 2009 11:11 AM

    Hi,
    You need to change the sort on Accounting Period Market from a group sort to a normal sort.
    Rod West

  • View the actual sales order (VA03, Display Mode) by double clicking on the Document Number of any line item displayed in the report.

       CLASS LCL_HANDLE_EVENTS DEFINITION.
      PUBLIC SECTION.
        METHODS:ON_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_SALV_EVENTS_TABLE
        IMPORTING ROW COLUMN.
    ENDCLASS. "lcl_handle_events DEFINITION
    DATA: EVENT_HANDLER TYPE REF TO LCL_HANDLE_EVENTS.
    *       CLASS lcl_handle_events IMPLEMENTATION
    CLASS LCL_HANDLE_EVENTS IMPLEMENTATION.
      METHOD ON_DOUBLE_CLICK.
        CASE COLUMN.
          WHEN C_VBELN.
            READ TABLE T_FINAL INTO WA_FINAL INDEX ROW.
            IF SY-SUBRC = 0.
              SET PARAMETER ID: C_AUN FIELD WA_FINAL-VBELN.
              CALL TRANSACTION C_VA03 AND SKIP FIRST SCREEN. "#EC CI_CALLTA
            ENDIF.
        ENDCASE.
      ENDMETHOD. "on_double_click
    ENDCLASS. "lcl_handle_events IMPLEMENTATION
    Is Something Wrong With The Code?

    If you are using ABAP for the report this will fulfill your requirement.
    Take a close look at the ZUSEREXIT program.
    When you execute it you enter the t-code e.g. VA01.
    It will display the enhancements available in VA01.
    Now you can click on the user exit name and you will
    automatically be transferred to SMOD t-code with the
    selected enhancement as a parameter.
    You can see in the below code how simple it is to implement this.
    You will not call SMOD but VA03 t-code on click.
    You can use this code to execute it in SE38 and see how it works.
    CODE STARTS BELOW:
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
              tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
        select single * from tadir where pgmid = 'R3TR'
                         and object = 'PROG'
                         and obj_name = tstc-pgmna.
        move : tadir-devclass to v_devclass.
           if sy-subrc ne 0.
              select single * from trdir where name = tstc-pgmna.
              if trdir-subc eq 'F'.
                 select single * from tfdir where pname = tstc-pgmna.
                 select single * from enlfdir where funcname =
                 tfdir-funcname.
                 select single * from tadir where pgmid = 'R3TR'
                                    and object = 'FUGR'
                                    and obj_name eq enlfdir-area.
                 move : tadir-devclass to v_devclass.
               endif.
            endif.
            select * from tadir into table jtab
                          where pgmid = 'R3TR'
                            and object = 'SMOD'
                            and devclass = v_devclass.
             select single * from tstct where sprsl eq sy-langu and
                                              tcode eq p_tcode.
             format color col_positive intensified off.
             write:/(19) 'Transakcija - ',
                  20(20) p_tcode,
                  45(50) tstct-ttext.
                         skip.
             if not jtab[] is initial.
                write:/(95) sy-uline.
                format color col_heading intensified on.
                write:/1 sy-vline,
                       2 'Naziv exita',
                      21 sy-vline ,
                      22 'Opis exita',
                      95 sy-vline.
                write:/(95) sy-uline.
                loop at jtab.
                   select single * from modsapt
                          where sprsl = sy-langu and
                                 name = jtab-obj_name.
                        format color col_normal intensified off.
                        write:/1 sy-vline,
                               2 jtab-obj_name hotspot on,
                              21 sy-vline ,
                              22 modsapt-modtext,
                              95 sy-vline.
                endloop.
                write:/(95) sy-uline.
                describe table jtab.
                skip.
                format color col_total intensified on.
                write:/ 'Broj exita:' , sy-tfill.
             else.
                format color col_negative intensified on.
                write:/(95) 'Nema user exita za ovu transakciju'.
             endif.
           else.
               format color col_negative intensified on.
               write:/(95) 'Transakcija ne postoji'.
           endif.
    at line-selection.
        get cursor field field1.
        check field1(4) eq 'JTAB'.
        set parameter id 'MON' field sy-lisel+1(10).
        call transaction 'SMOD' and skip first screen.

Maybe you are looking for

  • Why won't my vi run outside of the LV2011 project explorer?

    I've created a LV2011 project. The vi's within this project open executables to perform measurement functions. When I open the vi's from within the project explorer window the executables open with no issues. However, with the LV project closed and o

  • Unrecognized Event Datatype Using ActionScript 3.0 Cookbook

    This is my first time using Flash 9 Alpha (F9A)/ActionScript 3.0. I am using code from the ActionScript 3.0 Cookbook so I assumed it would work immediately; this is not the case. I've verified that my code looks exactly as it does in the Cookbook wit

  • Program to populate variable values in BPS thru file

    Hi All, I've layouts in BPS. In my layout my super user has to change Version/ Actual period/forecast period/previous version everymonth. For all the above we are using varibles. My requirement is that i need to write code to populate Version from a

  • Can we use Call transaction and session method in same program ?

    Hi experts,                  Is it suggested to use call Transaction and session method in the same Program ?                  i have a doubt , why cant we use multiple call transactions in same program instead of session method if we have multiple t

  • Which acl is used for creating a new Context?

    When I do something like this....           Properties h = new Properties();           h.put(Context.PROVIDER_URL, "t3://localhost");           h.put(Context.SECURITY_PRINCIPAL, "cdanek");           h.put(Context.SECURITY_CREDENTIALS, "cdanek");