Wrong usage times after firmware update?

My usage times used to reflect my usage perfectly, prior to the recent firmware update. Ever since I updated its like my usage times keep going up even when my phone is "sleeping". Currently my phone displays 1+ day of Standby and 1+ day of Usage on one full charge - even though I have probably used it about 6-8 hours total.
Here is a picture of what my phone currently displays from one single charge, all of the usage settings were reset right after the firmware update when I charged it. http://img69.imageshack.us/img69/911/img0166sd4.jpg

It looks like I have found a solution.
I again connected the Airport via ethernet cable, included all the settings as before, changed the channels of the router and the Airport device to 4 AND also changed the security settings in the router from "WPA/WPA2" to "WPA (TKIP") (whatever that means...). The last one was only a try but in the end it worked out. The airport device was instantly recognized and my music can now be streamed wirelessly again...
I now hope it lasts...
So for those out there who are facing the same problems, try out this one.
Cheers
Axel

Similar Messages

Linksys WRT54 G V1.1 - Problems with SBC DSL after firmware update

I have a Linksys WRT54G version 1.1. I also have AT&T SBC Yahoo! DSL with the SpeedStream 5100 DSL modem.
It previously had the original firmware, as I never updated it. Last night I updated the firmware. It was successful. However ever since I have not been able to successfully connect to my SBC DSL.
I set it to PPPOE and used my SBC username and password to connect but it would not connect. Router name, domain name, host name and the new field called "service name" were all left blank previously....so I do not think anything changed there. I talked to the SBC technical support and the lady had no information to give me regarding any of those fields because the router was 3rd party....she gave me the Linksys number but how are they supposed to know any of SBC's specific information? Anyway I figured I mind as well post here instead of waiting in line for an on-line Linksys technical advisor.
There were also new added options in the updated firmware version like "advanced settings" I believe it is called....since the firmware update the "router" was set to be a hub instead of a router....so I changed it to router. Then I was able to go to status and finally be able to connect. Prior to that it was giving me an error saying it was not able to obtain an IP address from the server.
Although I was able to connect to the SBC DSL service through the router I am still unable to actually get an internet connection. Cannot receive weather through weatherbug or access websites through IE7. For the time being I disconnected the router and have the modem hooked directly to my desktop. This works OK temporarily but I'd love to get the router up and running again so I could use my wireless laptop as well as the increased security that the router provides.
If you can think of something I am forgetting or doing wrong with this new firmware update let me know. There are a bunch more options and settings than the original firmware that I am not really familiar with. Thank you in advance!

With most AT&T systems, the modem does your PPPoE login. The Linksys router should not repeat this login. Instead, in the WRT54G, the "Internet Connection Type" should be set to obtain an IP address automatically (DHCP). This is the factory default setting.
Additionally, after a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
So, to fix your system, do the following:
First, reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, then power down your network, then wire the ethernet port on the 5100 to the Internet port on the WRT54G. Leave one computer wired to a LAN port on the WRT54G. Power up your network. It should work.
If you cannot get "Reply from ..." in step 9 above, your router might be dead. Report back with this problem.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, report back with this problem.
If you need additional help, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 02-18-2009 02:49 AM

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Drastic reduction in battery usage time after OS B...

Drastic reduction in battery usage time after OS Belle update. Without calls or any application use - one day! I am using a Nokia C7-00. Any solution to the problem?

Many folks, including myself have had success with correcting this with a battery cycling...
Basically...drain the battery until iPhone shuts itself off...Then charge using a home power outlet and NOT a Computer USB...
Then allow it to drain again fully until it shuts off...then again Charge fully using Home outlet...
Even though these batteries don't carry memory...this process seems to correct battery issues with the cells themselves just not acting properly...

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.

Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.

https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
Type '''about:crashes''' in the URL bar and hit Enter. <br />
Click the hyperlinks to bring up the Crash Report pages and copy'n'paste the URL of each of those reports into the message box here. We'll see if we can help you figure out what is causing those crashes to happen.

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

I've downloaded itunes 12.0.1.26 3 times after the update and it still doesnt work! Everytime i start it up it comes up not responding, why is this happening? how can it be fixed? I currently cannot use itunes!!!!!!

I've downloaded iTunes 12.0.1.26 3 times after the update and it still doesn't work! Every time i start it up it comes up not responding, why is this happening? how can it be fixed? I currently cannot use iTunes!!!!!!

Hey High Socks,
Thanks for the question. If I understand correctly, iTunes isn't working when you try to launch it. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Time Capsule Firmware Update 7.5.1 - Where's "download" on support page?

Hey there -
There is no "download" button available on the apple.com/support page for the latest Firmware Update (7.5.1) for the Time Capsule.
Wouldn't care if my device would automatically bring in the update. But, it won't. It's still sitting with the 7.4.2 firmware version.
Any ideas how to get the Time Capsule Firmware Update 7.5.1 to download?
Thanks!

SparkleToes wrote:
There is no "download" button available on the apple.com/support page for the latest Firmware Update (7.5.1) for the Time Capsule.
Wouldn't care if my device would automatically bring in the update. But, it won't. It's still sitting with the 7.4.2 firmware version.
Any ideas how to get the Time Capsule Firmware Update 7.5.1 to download?
Welcome to Apple's discussion groups.
According to this Apple Web page
http://support.apple.com/kb/DL965
that update is "for the latest Time Capsule and AirPort Extreme Base Station (Late 2009)". If in AirPort Utility the menu item AirPort Utility -> Check for Updates results in the message "No updates to AirPort Utility or any of your AirPort wireless devices are available at this time" (which is the case for the Time Capsule I bought in August of last year), then it would seen that update doesn't apply to your Time Capsule.

TS1702 What is wrong with Pages after the update?

What is going on with Pages after the update?

Hey George.iD, you wrote on 6 Feb 2014, this:
Re: What is wrong with Pages after the update?in response to TRSPAGES
What's wrong with it?
As one thing after more-than a month later on 22 March, Pages _refuses_ to alter the color of text. How maddening this is: I select text, I select a crayon, but the text _remains_ black. < Pages is Incorrigible! :-( >
[After I vented steam, I feel better -- until later. What a cycle! :-) ]

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Why the sound of my ipad3 gone suddenly,not first time after i update the software

Why the sound of my ipad3 gone suddenly,not first time after i update the software

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I just did an Time Capsule firmware update and now my Time Capsule is dead. What happened?

I just did a Time Capsule firmware update and now my Time Capsule is dead. What happened?

tresbaileys wrote:
it may be important to note that when I put my ear to the box I can still hear the HD spinning (although no lights are lit and it doesn't show in the airport utility). Ideas??
That is very bad.. how old is it??
The Gen4 TC can die this way.. it is not usual but it happens.
Leave it for several hours to cool off. Do a factory reset immediately when you try to restart it.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
Tell me exactly what the LEDs do throughout this process.
Both the main one at the front and the LED on the ethernet ports which should all flash during bootup.
If it is less than a year.. of course Apple will replace under warranty.. 2 years in some places.. Europe .. places with stronger consumer laws. If you have applecare on a computer it should still cover the TC.
I kind of doubt you are going to get this going again... but we can try.

Wrong usage times after firmware update?

Similar Messages

Maybe you are looking for