Wrong Voltage for a GeForce 2 MX400

I've an ASUS GeForce 2 MX400 with a MSI KT6-Delta LSR, and the utility software of my graphical card say me : " Your VGA card voltage 3.3 is out of safe bound. Motherboard doesn't supply with reliable 3.3 Voltage Please Contact with motherboard manufacturer for help."
The VDDQ Voltage is at 1.98V.
I tried to change the AGP4x by AGP2x but there is the same problem.
I can't play games, and the logo of Bios and Windows don't appear well on the screen...
Thanks for help
MSI KT6-Delta LSR
XP2600+
256 Mo DDR PC3200
HD Maxtor 30 Go
ASUS GeForce 2 MX400
PSU 350W

boards not designed to work with 3.3v agp cards
and a gf is not a 3.3v card any way unless they messed with the specs
you best ask assus as a gf 4 should be 1.5v any way

Similar Messages

  • Geforce 2 Mx400 has compatibility with AGP 8x?

    I have a MSI Geforce 2 MX400 T64CS  model MS-8826  Ver: 2.6
    Can anyone tell me with it is a 1.5 volts card? With this card has compability with AGP 4x.
    I search in the manual and the card but I didn´t find the voltage.
    http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=161
    Any help is aprecciated.
    Thanks.

    Quote
    I think you may find some 8x AGP cards will ONLY work in an 8x AGP slot and are not backwards compatible....
    Can you name any examples? Seems stupid for manufactuers to cut out part of their product target audience.

  • IdeaCentre K230 w/ Vista & Geforce 2 MX400 PCI

    I have an issue adding a Geforce 2 MX400 PCI to my IdeaCentre K230.  No matter what I choose in the BIOS for the video option, the PC will only recognize one video output at a time.  If I set the BIOS to load the onboard primary, the device manager only shows the onboard adapter active and shows a yellow error on the add-in card.  If I set the BIOS to use the add-in as primary, the onboard adapter shows an error in the device manager.  How do I get it to recognize and use BOTH outputs at the same time?  I really want dual monitors but don't know how to get that to work.  Thanks in advance!
    (mod edit: the K230 is an IdeaCentre, not a ThinkStation.   all references to "ThinkStation" edited to prevent confusion.)
    Message Edited by erik on 03-07-2009 08:17 AM

    From what I gather, you are trying to use both the onboard video and a video card at the same time, which is a no go. Only way to get on 2 monitors is upgrade that ancient video card to one that can dual display.
    Michael.
    "Trying is the ultimate form of procrastination."

  • HELP! - Voltages for Overclocking Q9450 on the MSI P7N Diamond (780i chipset)

    Hey.  I fully understand the settings as far as frequencies go, but am a total voltage newb.  No matter what I do I cant seem to get a stable vista load up with my voltage settings. 
    Please help me by providing suggested voltage settings for my hardware.
    CPU - Intel Core2Quad Q9450
    RAM - 6 gigs of DDR2-800 rated at 2.1V
    VIDEO - Dual Nvidia Geforce 8800GT's in SLI
    MOBO - MSI P7N Diamond, based off the Nvidia Nforce 780i SLI chipset
    My cooling is sufficient, and I have the BIOS version 1.2
    I also turned off all of the overclocking not friendly functions, example: spread spectrum, and DOT, ETC....
    I am trying to run my CPU at 3.2 GHZ (400 mhz before multiplier)
    my settings I want are (as shown in the P7N bios)
    System Clock Mode - Manual
    FSB clock - 1600
    DRAM clock - 800
    Please help me by providing the proper voltages for my setup
    Everything I need is marked by "???"
    CPU Voltage - ???
    DRAM Voltage - (already have, its 2.1)
    NB voltage - ???
    SB voltage - ???
    NB Memory reference voltage - ???
    DIMM memory reference voltage - ???
    Memory terminator voltage - ???
    CPU GTL reference voltage - ???
    NB GTL reference voltage - ???
    FSB terminator voltage - ???
    SB sleep mode voltage - ???
    PCI Expander PLL voltage - ???
    For the sake of you not typing too much, if you specify voltages, any that you do not specify will be assumed to be left at [AUTO]
    PLEASE help me by providing some voltages for me, as I have absolutely no clue what to put for them.  If you have any questions about my hardware feel free to ask, and any help is GREATLY APPRECIATED

    Quote from: nihilkrist on 08-October-08, 08:03:22
    adjusting gtl ref. voltages isn't very difficult, but it is probably best to learn the basics first.
    So, basically, increase the fsb a little. So, for example, from 1333 to 1400. See if it's stable, if it isn't try bumping up vcore one notch and try again. If not try Northbridge. Then later move on to stuff like the fsb term.
    Test stability using prime95, there is a 64-bit multi-core aware version floating around somewhere. Try the ftp server linked to in the "hot use prime95" sticky on here.
    Tbh with your OC you shouldn't need to touch any other voltages, or really use the gtl ref settings. What exactly is "sufficient" cooling though? Stock?
    *EDIT: on a side note, just so you don't think I'm deliberately being awkward not telling you specific voltages, they wouldn't do you any good. Every cpu/mobo can handle different freq. at different voltages. Also, use cpu-z to check on your actual voltage and make sure you don't raise it beyond 1.3625 (I think that's right, it's 1.36something anyway)
    Thanks for the tips.  The reason I wanted to jump straight to FSB 1600 is because the MSI p7n is really picky and only likes 1:1 ratios. 
    My "sufficient cooling" is an aftermarket heatsink, high performance thermal paste, and MASSIVE airflow through my case.  If you want specifics, its the Scythe Zipzang
    Quote from: AaronYuri on 08-October-08, 09:05:16
    CPU Voltage - No one can tell you this.
    NB voltage - Depends on what frequency you want
    SB voltage - What's your HDD setup?
    NB Memory reference voltage - Auto
    DIMM memory reference voltage - Auto
    Memory terminator voltage - Auto
    CPU GTL reference voltage - Depends on speed and other voltages
    NB GTL reference voltage - Same as above
    FSB terminator voltage - Depends on CPU voltage and CPU/FSB clock speed
    SB sleep mode voltage - Auto
    PCI Expander PLL voltage - Auto
    My recommendation is do some reading. Guessing leads to dead hardware.
    6GBs smells like mixing modules... Or do you have 3 modules?
    First of all, I already stated the frequencies that I wanted in the top post, and fairly clearly at that. 
    CPU shouldnt be too hard to figure out, as there are very few to choose from.  I'll try to get back to you on that one
    I have 5, 7200rpm SATA 3.0 drives.  It sometimes runs with only 4, as one is a hot swap. 
    My ram IS mixed, unfortunately.  I'm using 2x 1gig sticks, and 2x 2gig sticks.  However, both sets have heatsinks, and are rated at 800mhz, 4-4-4-12, 2t, timings.  (2.1v)
    I AM running them in dual channel.
    If this helps you suggest voltages please do, If not, then I will just have to start trying using nihilkrist's suggestions.

  • Video capture driver for MSI GeForce 2 Pro video card

    Hi,
     I am in need of the nVidia WDM video capture driver for my Geforce 2 Pro video card. Model #M-8831. I was able to download it from the MSI/TW website over a year ago just fine. My computer crashed from a game bug a couple of months ago and MSI/TW does not list the capture driver I need any longer. I did email the company asking for help with no response back yet (after 2 weeks). You people may be my last hope.
     I do have the cd that came with the video card, but I've never been able to install the capture driver from it. There is a button to install it, but it never gets loaded. I've tried browsing the cd and also tried installing it using the windows wizards with zero results. My only successful install was from the MSI home website.
     If you need more information, please let me know.
     Thank you,
     Bruce ?(

    If you followed the second link it says this:
    Windows XP/2000/Me/98SE - WDM Driver v1.22
    Version: 1.22
    File Size: 1.1 MB
    Release Date: December 9, 2002
    Downloads
    » Primary Download Site «
    » Mirror Site 1
    » Mirror Site 2
    » Mirror Site 3
    Release Highlights:
    First stand-alone WDM driver release for Personal Cinema and VIVO-enabled products.
    Right there at the end it says Release Highlights and says specifically that it's what you want...
    Read my man, read...
    Cheers!! 8)

  • Normal temperature for NVIDIA GeForce 8600M GT

    Hi, what is the normal temperature for NVIDIA GeForce 8600M GT when on notebook I use only word, or some programs, no play games.

    Quote from: Mike on 01-February-10, 11:02:34
    normal depends on the environment, the ambient temperature.  Is it hot where you use it?  Do you use it on a hard surface or place it directly on your lap or some cloth type surface.  There are quite a number of variables.  What temperatures are you noticing?
    if I work with word or use internet the temperature is about 55*C

  • I registered the wrong information for my iCloud account--I misspelled and now want to change it.  Help is needed to delete the account and start anew.

    I registered the the wrong information for my iCloud account--I misspelled the account name.  I accidentally spelled blackberry instead of blackbird.  How can I change this?

    If you don't want to use an alias you'll have to create a new account as you cannot change the @icloud.com address once created.  You'll have to create a new ID, verify the ID, then use the ID to create the new account, and migrate your iCloud data to the new account.
    If you are currently syncing data with iCloud, begin by saving any photo stream photos to your camera roll as mentioned above.  If you are syncing Notes with iCloud, you'll also need to open each of them and email them to yourself so they can be recreated in the new account.  Finally, if you are syncing any iWork documents with iCloud, turn off iCloud syncing in your iWork app settings.
    Then go to Settings>iCloud, tap Delete Account, and choose Keep on My iPhone when prompted.  Then in Settings>iCloud tap Get a Free Apple ID at the bottom, set up your new ID, verify the email address you use to create it by responding to Apple's verification email, then sign in with the new ID to create your new account.  Turn on your iCloud sync settings and choose Merge when prompted to upload your data to the new account.  When you turn Mail to On you will be prompted to create your new @icloud.com email address.  Be carefull to type it correctly as it cannot later be changed.

  • "Invoice History Report "show wrong balance for supplier invoice with USD

    Invoice History Report show wrong balance for supplier invoice with USD Currency
    After I run this report i see in the last of this report there is difference between the supplier total
    USD (Currency ) and the open Balance USD , it is decreased the open balance
    for supplier with 2300 USD with out any reasons
    bellow is some data copy of the report
    ======================================================
    Supplier Site Total: SAR 34,700.00
    Supplier Site Total: USD 39,000.00
    Supplier Total: SAR 34,700.00
    Supplier Total: USD 39,000.00
    Open Balance: SAR 34,700.00
    Open Balance: USD 36,700.00
    *** End of Report ***
    ==============================================
    please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
    or it is bug in this report , becuase i compare this report with other report in account payable like
    -supplier open balance letter
    -invoice register report
    -invoice aging report
    all this report give me the amount for supplier USD =39000
    BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
    thanks

    Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
    Thanks

  • Will USB-6008 DAQ be able to power and record voltage for UMS T5 tensiometer at the same time?

    I would like to use my NI USB-6008 to provide power to my UMS T5 tensiometer  (http://www.ums-muc.de/en/products/tensiometer/t5.html) as well as take readings from it, but I don't know if this is possible to do properly. The supply voltage for the instrument can be as low as 5V, which I can easily get from the dedicated +5V channel. I am able to power the instrument and connect it to an analog input on the 6008 and measure a voltage in differential mode. However, while reading the support literature for the instrument, I find the following:
    "Potential data acquisition pitfalls: Because the pressure transducer is configured in a Wheatstone full bridge, the input voltage and signal mV output cannot be connected to the same reference (ground). Hence, the signal mV output can only be measured using a differential voltage measurement. Therefore, do not attempt to make a single-ended measurement of the pressure transducer mV output."  (http://www.decagon.com/assets/Uploads/MeasuringUMSTensiometerswithnon-UMSControlandDataAcquisitionSystems.pdf)
    My understanding is that the 6008 can take a differential measurement if I attach the signal "+" and signal "-" to the positive and negative analog input terminals. However, it seems that all of the Ground ports on the 6008 are grounded to the same reference, which would make my voltage measurement invalid according to the paragraph above. So my real questions is: if I attempt to record the voltage using one of the analog inputs on the 6008 in this way, is the measurement valid? Or do I need to find a separate power supply with a different reference ground to ensure that the measurement is accurate?

    The specification sheet for that device is very poor. The manual is not much better. Companies which want to sell scientific equipment should publish decent data sheets or get out of business.
    In section 3.4.3 General requirements the device is described as a "non-amplified bridge circuit."  This information along with the bridge impedance should be in the specifications because it is essential to applying the device under any circumstances other than the nominal behavior at 10.6 V.
    The answer to your question is this:
    You can use it with the USB-6008.  The 5 V power supply will result in output voltages slightly less than half (5/10.6) the voltages specified under nominal conditions. You can use the differential input mode on the USB-6008.  The absolute input voltages will be about 2.5 V with the 5 V supply. That voltage is within the working range of the device. The differences will probably be less than 100 mV. The resolution of the USB-6008 on the +/-1 V range is about 0.5 mV so your pressure resolution will be around 1 % of full scale. The input impedance and termination voltage of the USB-6008 will introduce some errors.  These may be on the order of 5-10%. I cannot predict much better without the missing bridge impedance specification.  Those errors should be systematic and relatively constant. A calibration of the whole system - sensor and DAQ device together should allow you to compensate for much of that error.
    Lynn

  • I used the wrong ID for iCloud on my iphone 5. It is linked to an email that no longer exists. Do I have to delete my iCloud completely and set it up all over again?

    I used the wrong ID for iCloud on my iphone 5. It is linked to an email that no longer exists. Do I have to delete my iCloud completely and set it up all over again?

    You can change the linked email/sign in email for your iCloud and Apple ID accounts from 1 site,
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Go to Manage your Apple ID
    Sign in with your current creditals
    On the left, click Name, ID and Email Addresses
    Under Apple ID and Primary Email Address, click Edit
    Type in your new Email.
    Go to Apple ID, click Edit
    Type in your new Email

  • I forgot my password for my email, then I cant remember my passwordfor my icloud, how can I reset my password If I feed the wrong birthday for my email/account... Now my account has been disables.. please please please please help me

    I forgot my password for my email, then I cant remember my passwordfor my icloud, how can I reset my password If I feed the wrong birthday for my email/account... Now my account has been disables.. please please please please help me

    You will have to call Apple and speak to someone in account security.

  • First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longer have access to network settings

    First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longerhave access to network settings

    Unfortunately, it says I can't delete anything without the missing password.

  • IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball.  I almost think it is looking in the wrong place for the pictures.  How do I redirect it back to the Mac hard drive?

    My iPhoto is not responding.  Whenever I click on the iPhoto icon I get a twirling beachball.  It is as if the machine is looking in the wrong place for the photos.  How can I see where the machine is looking to find out if this is really the problem.  How can I see the path?

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
    If that's the case  Apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Hello, i am using iphone 4. I made the wrong purchase for ipad.navturk live navigation i bought. just trying to do update. I would ask you to cancel the order. best regards.

    Hello, i am using iphone 4. I made the wrong purchase for ipad.navturk live navigation i bought. just trying to do update. I would ask you to cancel the order.
    best regards.

    There is no one here from Apple or iTunes support. You need to contact iTunes support here:
    http://www.apple.com/support/itunes/contact.html

  • Content Search Web Part displaying wrong Results for anonymous Users.

    HI Forum Group,
    I am getting Wrong results for my content search web part. The requirement is to show the News Description for the selected news item.
    I have a catalog site which stores News like 
    News1
    News2
    News3
    as Items. and i have connected this catalog in publishing site which is anonymous. In the publishing site created one page "News.aspx"added search results webpart which shows all the news item. Added one page "Description.aspx" to show
    description to show the selected news item.
    When ever user selects any news from news.aspx page it will redirected to description.aspx with the selected item ID
    The "Description.aspx" the search results page gets the data based on the URL by QueryString parameter as shown below
    The problem is, if i multiple items to open in tabs all the items are showing the data same as the first selected item, though the article ID is different.
    Thanks
    Sithender

    Hi，
    Thank you for your feedback on how you were successful in resolving this issue.
    Your solution will benefit many other users, and we really value having you as a Microsoft customer.
    Have a nice day!
    Best Regards，
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for