Wrong Windows product key during SP2 installation

Hi all, i have reinstalled the windows XP.
When i try to update the SP2 for the system, mircrosoft told me i am not using a right product key.
Then i follow the instructoin to download a KeyUpdate Tool and i put in the product key which under my notebook, it saids it is not the correct key for the windows that i am using.
At the compare product key site, it shows:
OS Version: Windows XP Professional
Manufacturer: TOSHIBA
Model: Satellite M60
Product Key: *****-*****-*****-*****-P6R2Y
It shows correctly the manufacture and the model.
However, i am using a Windows Xp Home Edition and the key from that CD is end with *****-*****-*****-*****-Q6JWG.
And the product key from my notebook is end up with *****-*****-*****-*****-GCFKM.
Then I download the Windows Product Key Update Tool and put in both the product key from the CD and notebook.
Both of them dosen't work. I want to know how can I update the Service Pack for my windows. Can anyone help? Thx!
What can i do for that? Thx!!!!!

Hi
I have read some threads about similar problems with the OS key and the key changing has always helped
Sometimes Microsoft rates the image keys as incorrect or invalid. Why? I don't know... it's Microsoft you know ;)
Fact is that the key on the CD cover can be used only to activate the installed Microsoft Works or OneNote software on the notebook. The key is not responsible for the Windows OS!
The key which could be used with Win OS is placed at the bottom of the unit.
Well, according to your message you used this key and now Im a little bit confused
I think you should make a call to the Toshiba authorized service provider in your country for clearing this problem

Similar Messages

Miix2 8 Windows Product Key not accepted

Hello,
I got a brand new Miix2 8 which asks me to activate Windows.
I got a sticker with the Windows product key inside the product box. However Microsft tells me that there is something wrong with it. In the UEFI I can find the entry for the windows key. There it says "Std" only.
Where can I get a working product key. My device should be activated by the factory already?
Thanks and Best Regards
Marco

That raises flags. I would contact Lenovo to have the machine re-imaged.
Also, can you clarify when you said you received a product key in the box? Again, it seems very unusual. With other series, the key is either affixed to the unit, or embedded into the BIOS.
Did you purchase this unit through a retailer, or direct from Lenovo?
←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗
Tap that kudos button if I helped ^^
←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗

Prompted for Windows product key after FBReseal.exe

Greetings,
With the EOL of Windows XP fast approaching, we are planning to deploy POSReady 2009 to several cash registers. My plan is to install the POSReady 2009 Ghost image provided by our vender/OEM, make our site specific modifications, then run fbreseal
and create a new image for deployment. My problem is that after I run fbreseal (and then simply reboot the register as a test) the setup wizard asks me for a Windows product key (which I don't have and can't get because OEMs can not give it to customers).
I thought that the entire purpose of fbreseal was for cases like this when you do not have a Windows product key? What am I missing? Is there a hidden switch I should be using with FBReseal?
Thanks,
Dasani

I had found/read the document... I guess the fourth paragraph had led me to believe that FBReseal would not ask for the product key:
"Sysprep is useful in scenarios when you have access to your POSReady product key, and also provides additional customizing functionality over FBReseal. FBReseal does not require a product key, but it does not have as many features as Sysprep, and it can
only be run one time. If you do not have access to your POSReady product key, you must use FBReseal."
When I apply the Ghost image from the vender and start the register I get the following prompts:
- Welcome Screen
- I have to accept the license agreement
- Choose regional/language options
- Define my name/organization
- Define computer name and administrator password
When I FBReseal it and then restart, I get the exact same prompts EXCEPT after I define my name and organization it asks for the Windows product key.
I suspect the vender did not prepare our Ghost image properly, it appears that they may have ran FBReseal. Based on the POSReady 2009 deployment guide, this should not be done:
http://technet.microsoft.com/en-us/library/dd936220(v=winembedded.0).aspx
"The product ID (PID) that is required to license the OS is only available to an OEM. End users receive a fully installed OS that can be customized. It is important to understand the state of the POSReady OS that you receive from your OEM. The original installation
of POSReady must be prepared by the OEM by using the Sysprep utility. This will put the OS image in a state that is ready to be customized and cloned. The OEM must not use FBReseal to prepare the computer for cloning. The suggested cloning method, which uses
Windows Deployment Services, will only recognize a device that has had a full Sysprep pass. The OEM will likely provide two sets of media to aid in the POSReady customization process:"
Anyway, since the vender I'm working with is slow.... it appears I may have no choice but use their Ghost image and then apply all of our customizations to each and every register.
Thanks,
Dasani

WINDOWS PRODUCT KEY - for reinstalling WINDOWS

What if your computer comes with NO Windows Product Key sticker -- computer came new with Windows 7 preinstalled but, included Windows 8 installation discs - never needed a key & should've (in hindsight) made a boot repair disc - but, recently computer would NOT boot up - tried to repair it but, no luck -- SO, now if I want to reinstall Windows 7 will have to use an OEM but, need a Product Key for HP computers --- any time else you install Windows you are REQUIRED to enter your own Product Key # which is about 25 digits including letters, numbers & dashes ---------- I do have Windows 10 on another drive but, love Windows 7 -- Windows 10 is far better than 8 BUT, not as good as 7 I have looked all over my case for any WINDOWS sticker & inside too -- I have heard that laptops are usually under the battery but, for DESKTOPS will be stuck somewhere on the case & this does NOT have one -------------- it is just STUPID for HP to ship computers without a PRODUCT KEY as every other manufacturer does for this reason..THANKS

Hi, Goodmorning! Uhm as far as I know Operating System of these unit didnt came with product keys, because operating system of this unit is from the manufacturer, And it was never been installed using standalone discs by hp. You might need to order recovery discs online on its support website. as far as I know. Hope you dont mind.

Where can i find my windows product key ? am I not allowed to know this these days ?

Where can i find my windows product key ? am I not allowed to know this these days ?

If you bought a notebook with Windows 8, there are no product key stickers anymore.
The key is now digitally encoded in the BIOS.
http://www.mydigitallife.info/windows-8-to-have-oem-activation-3-0/
I don't have a notebook that came with windows 8, so I don't know if you can see it in the BIOS or not but that would the place to look.
Paul

I Need the Windows Product Key for my Laptop

I had to use my recovery disks and Microsoft was not able to validate the software online. When I called Microsoft support, I was told I needed the Product Key. When I looked under the bottom of my laptop, one of the numbers/letters is worn and hard to read. I was told to contact HP. When I attempted to do this on the website, I got a message that HP no longer services this laptop. I don't need service. I just need information. All of the HP product information was nicely sealed and secured. I don't understand why the same was not done for the Windows product key. Thanks.

Check everything to make sure all is working OK. I do not think it is necessary to reload the OS if everything is working. There are other ways to get it activated.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

How do I get my OEM windows product key that came with my laptop when I bought it? Lost info/discs

I needed to clean install my laptop with Win8.1 before I upgraded to Win10, i was told that the BIOS held the key so I wouldnt need it and I dont have the OEM windows product key sticker that came with it when I bought it and I cant activate!!? Help

Hi
what if my recovery partition is lost too? I hace an HP15 Notebook with windowa 8.1 and a "friend" deleted the recovery partition. Now I dont know what to do to reformat and recover my laptop to its original condition. Saddly i dont have the recovery dvds either.
Thanks,
Adolfo

T440s Windows product key sticker

Hi, I plan on reinstalling Windows 8. Does anyone know where the Windows product key sticker is located on the T440s? I've looked under the battery compartment but it's not there. Any help would be appreciated.

It's built into the BIOS, so Windows Setup will pick it up automatically.

Cannot use product key for Vista installation on my Satellite U400-112

HI, NICE DAY
I BOUGHT TOSHIBA SATELLITE U400-112 , WINDOWS VISTA , I FORMATED MY LAPTOP THEN I SETUP WINDOWS VISTA , BUT WHEN I INTRED THE PRODUCT KEY (THAT IN THE LAPTP`S STICKER) , A MESSAGE APPEAR AND TELL THE P K IS INVALID !!!
BY THE WAY, MY WINDOWS VISA IS A COPY CD OF THE ORIGENAL VISTA, IT CAN BE UPTATED BUT DOES`T ACCEPT MY LAPTOP PRODUCT KEY!!!
WAIT FOR HELP, THANKS.

hi
i get answer by search results
ther is
Hi!
The product key on the bottom side of the notebook is an OEM key and belongs to the preinstalled OEM version. That means you can??t use this key with a normal Vista installation disk that you can buy on the internet or from a computer shop.
If you want to install Vista you should a Toshiba recovery disk or a Microsoft disk with the corresponding product key.
You can order a Toshiba recovery disk from Toshiba directly:
https://backupmedia.toshiba.eu/landing.aspx
Bye
thanks

Upgrade of Windows Product Key

I upgraded my product key on Windows XP Professional on the same computer and now am getting messages during sync with my 5th Generation iPod that "Some of the items in the iTunes Library were not copied to the iPod because you are not authorized to play them on this computer". How do I get it to recognize the computer with the new Windows XP Product Key?

Try playing one of the affected songs in iTunes. Do you get asked to authorise? If so, and if you do, do the songs transfer accross next time you sync?

How to obtain hardware key during first installation?

I'm installing SAP Netweaver 7.0 and got stucked when the installer requested Solution Manager Key. I went to SAP site to generate the key and there I was requested the hardware key. As far as I understand, the hardware key may be obtained using saplicense program but I don't have it installed yet.
How can I provide the hardwaer key during installation?
Thanks
Renato

Hi,
You need solution manager system to generate the installer key..
Login into Solution manager system - and enter T-code SMSY
You may need to do the following steps:
1. Create a system by right clicking on System entry and select Create new system.
Enter the System Name i.e., SID (3 chars)
Product = (select from the list you which to install)
Product Version= (select from the list you which to install)
Save the entries.
2. Select Menu Item "System--->Other Configuration" and enter the SID which you have created earlier.
Enter the Server Name(hostname)
Finally click on Generate "Installation/Upgrade Key Button "
The system generates a Key ,copy that Key and paste it in the SAPINST screen when it prompts for Solman Key.

Using Windows product key

QuestionCan I use the product key on the bottom of my computer to activate Windows?
AnswerAcer’s OEM version of Windows does not require a product key to activate. This means if you are using recovery disks you created on your system, or disks you ordered from Acer, Windows will automatically activate without the need for a product key. The product key on the bottom of the notebook is an OEM product key. This product key does not work for activating retail versions of the operating system.
If you did not make or are no longer able to obtain recovery media, you would need to purchase an operating system of your choice for installation.
For instructions installing a non-OEM operating system, please review this article:
Installing a different Operating System

Mistä voin tilata asennus USB tai tiedoston?

Pavilion dv6 - How can I determine if the windows product key for Windows 7 is 64 bit or 32 bit?

The hard drive in my Pavillion dv6 had to be reformatted. I do not have a recovery disc nor a Windows 7 disc. I do have a product key on the back of the computer for Windows 7 Home Premium. How do I determine if I should install the 64 bit or the 32 bit version of Windows 7? The product number is A3E82AV, Model dv6t-7000.

Hi: All dv6-7xxx models came with W7 64 bit. That is what the license is for (although the product key would also work on a 32 bit OS). You can make your own W7 installation media and use that to reinstall Windows. Link to the W7 ISO file downloads is below. Download the applicable version of Windows 7 that is on your product key (Home Premium, Pro, or Ultimate). The SP1 Media Refresh files are the latest ISO files. http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languag... Use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link below. You need a DVD or a 4 GB flash drive to use the USB method of compilation. Use the 25 character windows 7 product key to activate your installation. http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html Then go to the PC's support and driver page to install the drivers you need.

Looking for the parameter/command line to supply the license key during the installation of Adobe Captive CS6 application.

Hello - We are performing customize installation for Captive CS6 with the help of AAMEE tool. We have couple of licenses which we wish to supply over the installation command line during deployment. However we did not find any parameter or the command line which will allow us to enter the license key during installation. Has any one succeed in finding the command line where we can pass the license key during installation of this application?
Thanks.

Can you post the last bit of your log file? 100 or so lines should be plenty to see what's going wrong.

Windows product key

i have activated my laptop HP pavallion g6, but forget to keep that product key for windows 8. I'm intrested in installing other os also like ubuntu, bt without knowing original product key i'm afrid to do so.
anyone plese help me to find my original product key/ id for windows 8
thanku..:-)
This question was solved.
View Solution.

Hi,
All HP units shipped with Windows 8 does not have a physical product key. They have a Digital Product Key also known as DPK that is installed in the motherboard. This key cannot be retrieved as it is an OEM key unlike any other retail Windows key.
In case you want to install another OS on this unit, it is advised to create a Recovery Disk for this unit which could be done using the in built "Recovery Disk Creator" application. You can find a video in the below link to create the same.
http://h20621.www2.hp.com/video-gallery/us/en/customer-care/2008493915001/creating-system-recovery-d...
Please note that Recovery CD can be created only once for your notebook. You also have an option to create a recovery media on a USB pen drive if the option is available for your notebook. This information can be found when the tool creation application is opened.
Once these discs are created, you can make this notebook a dual boot by installing another OS. In case there is any problem, you can reinstall Windows 8 OS using the Recovery media you created.
Please click the white Kudos star on the left to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your issue makes it easier for other people to find solutions
I work on behalf of HP

Wrong Windows product key during SP2 installation

Similar Messages

Maybe you are looking for