Wrongly posted stock

Hi guru's
While using t-code QA11 user has made wrong posting in one storage storage location instead of another storage location..Now how can i make that stock available in the actual storage location..Pls tell me how to do that process.
Thanks in advance
rgds
subramanyam

Hi,
using tcode MIGO, transfer posting and others with movement type 311 you can
do stock transfer from sloc to sloc.
Regards,
nandha

Similar Messages

How to correct the wrong transit stock??

Hi All,
There is an issue with wrong transit stock in plant ABC with part-no.342849.
In MD04 it shows 14 pcs.But iin MB5T 0 pcs are shown in transit.
How do i correct the wrong transit stock...??
Thanks,
Forum

Hi,
Check if Post goods issue has been done with movement 641 from the supplying plant
If the delivery is created and not PGI'd it will reflect in MD04
Please check
Thanks
Diwakar

"Check Business Area of the company code" error while posting stock

Hi Experts,
While posting stock to a storage location of a plant , the system is giving me the following error message :
"Check Business Area of the company code" .
Would highly appreciate if I could get some info for this error message and how to resolve the same.
Thanks & regards
Vikas Hali

hi
i think division is missing in material master basic data , please enter division in basic data tab in material master then you will try ,
then post the stock
regards
vijay

Wrong opening stock and closing in RG-1

Dear experts,
system shows wrong opening stock in RG-1 when comparing to MB5B, how to correct ?.
regards
rajakarthik

hi
in MB5b just give co code and PLANt tick for valuated stock and execute
then again do same for storage loc stock

Error while posting stock from quality to return delivery

Hi ,
I am working in decentralized warehouse. I am posting stock from quality to return delivery in t code QA32. The following is the error message i am getting . i have also checked the movement type settings they are fine for 553.
"Posting only to free or blocked stock due to missing goods receipt".
Please let me know if i am missing any thing in config......
Thanks
Ilyas

Hi Ilyas,
Can you check again the movement type? For return delivery movement type 122 is used and 553 is for GI scrapping from QI. You can check it in SPRO>QM>QI>Inspection lot completion> Define inventory postings.
reg,
Sudhir

Wrong posting to asset in last fiscal year

Hi Gurus
Posting was done on the wrong asset number x instead of y in the last financial year.
depreciaion is posted to the asset X for almost 11 months in the financial year 2011
please specify the options available to transfer the whole acquisition amount and the depreciation amount(book and tax dep) that is booked to the wrong asset X to the asset y.
the balance in asset number X after transferring will be 30K (NBV). these postings have happened prior to the year 2010
the wrong posting occurred in last janaury (fiscal year april to Mar)
thanks in advance
regards
sap student

Do an ABUMN using a gross transfer and all the posted depreciation in the sending asset will be shown up as value adjustment in the receiving asset and in the next year, you see this value adjustment in the accumulated depreciation bucket.

Report for wrongly posted vendors

Hi All,
I have made payment to the wrong vendor and the check also realised. At that time I passed a jv to balancing the account instead of creating credit memo. Now I would like to get a report like what are the vendors has been wrongly posted. This is for creating credit memo purpose. How to track the wrong vendor postings.
Thanks...

Hi,
You have paid wrong payments to Venodrs either manually or automatically it doesnot matter.
System doesnot know that payment has been made to wrong vendor. So you have to find the vendors manually. otherwise your financial statments will be affected.
Thanks
Chandra

"UNABLE TO POST STOCK IN MB1C"

Hello. GE...
When I am trying to post stock in MB1C, I am unable to proceed further as the system shows the error "Account determination for entry INT GBB ____ BSA 7900 not possible
Message no. M8147",
When I am trying to correct the entry in OBYC, i get an error "No changes for user SAP* allowed; Choose 'Display object' or 'Cancel'."
Please help.
thanks and regards,
syamala

Please search in forum or google so that you will find related suggestions.
Check one such thread
[No changes for user sap allowed when using data dictionary|http://sap.ittoolbox.com/groups/technical-functional/sap-basis/no-changes-for-user-sap-allowed-when-using-data-dictionary-3699582]
G. Lakshmipathi

How to post stock in quality inspection

Hi all
we want to post stock in quality by using MB1A t_code

Hi,
Activate the QM in Material master for your finished product, as soon as the goods movment is done from PP for the finished prduct the material will move in the quality stock.
Hope its useful.
Reward points if useful.
Thanks..

Vendor Invoice Wrongly posted- options available

Vendor invoices has been wrongly posted to another vendor .What are the options available to correct the same
1.FB05 Post with clearing
2.F-51-Transfer from one vendor to another
3.Reset the invoice and redo it
4.Go for F-03 Manual clearing and through FB50 go for a G.L Posting
Please advice me whether all the above can be applied
Thanks
Nagendra Prasad BS

Hi ,
IF this is coming from MM and not paid then please reverse in MR8M and maunal clear FI docuemnt F-44 this will open PO again for posting correct Invoice .
if this one is mm and paid invoice then raise a credit note to the wrong vendor and Post invoice on correct vendor .
Same you can do for ONo PO - FI docuemnt . Reverse the Invoice in FB08 and clear in FBRA if invoice is not paid . then Pst correct invoice in Fb60 to correct vendor .
IF invoice is paid to wrong vendor then raise a credit note and post the correct invoice to correct vendor .
many Thanks .

Wrongly posted to asset instead of GL

Hi All
I have a asset which was wrongly posted as an asset in the last year and now users want to transfer that to a Balance sheet GL account .Depreciation has been run on the same for the last year and the current year .Any ideas? Can I scrap the same and then reclass this as a GL or can anyone suggest some other method

Hi,
We need to classify this between last year posting and this year posting..
Last year: Depreciation in already posted and the books are closed..so if you touch the last year balances.. it will call for Audit Query as the books are closed.. Do write back if you also want to adjust the last year figures..
Current Year : You can change the depreciation key for this Asset to 00 Depreciation key and run a repeat run of the Depreciation. This will reverse the depreciation posted in this year in the current month and then you can execute transaction ABSO to transfer the balance of the Asset to a GL Account.
Regards,
SAPFICO

How to reverse wrongly posted unplanned depreciaiton

Hello Gurus,
There has been wrong posting of unplanned depreciation for an asset and now the user needs to reverse such posting.
This occured when the Asset was transferred and some unplanned depreciaiton was posted wrongfully. Now the user wants to reverse the unplanned depreciation.
Can someone please help me with the steps and the T-Codes to reverse such wrong unplanned depreciaiton posting.
Would be really nice of you.
Thanks
Subhankar

Hi,
With u201CUnplanned Depreciationu201D posting, as immediately it will not be posted to FI and no FI document will be generated. It will be posted in next normal depreciationrun i.e., Whenever you run the t-code AFAB-Depreciation Run as part of month-end activities, system will post the u201CUnplanned depreciationu201D along with normal depreciation. So there will be no FI document will be generated with u201CUnplanned Depreciation posting. You need to reverse only Asset document . For this purpose do the following steps :
Option :1: a) Go to t-code-AW01N-Asset Explorer, specify the Asset No., click the posted u201CUnplanned depreciationu201D value
                     and get the Asset Document No. which is available under the head u201CTransactionsu201D.
                   b) Use t-code-AB08 and reverse the Asset document     OR
Option :2: a) Go to t-code AS02-Change Asset Masteru2014Depreciation Areas, keep the Depreciation key with u201C0000u201D value
                   b) Run t-code-AFAB-Depreciation Run with u201CRepeatu201D option by giving/selecting the only the specific Main
                     Asset No. and Asset Sub-number at the bottom of the screen.
Regards
appalas
Edited by: appalas on Dec 14, 2010 1:21 PM

Business area wrongly posted for invoice

Hi All,
Business area wrongly posted for invoice.
The user was posted the invoice with two line items one with posting key 40 for debit and one is 31 for credit vendor, these two line items are posted with different business areas. and the the invoice is cleared also.
Could any one please suggest what the above issue affects the business. what would be the resolution to be done for this.
Thanks in advance
Nandha

Hi All,
The balances are not matching in fbl3n and fs10n, Due to the above wrong document posted and cleared also. what is the better way to match the two balances (fbl3n and fs10n).
Can i reverse the cleared wrong document and reset it in fbra, if i do this is there any problems occur in production.
please suggest to tally the balances of fbl3n and fs10n.
one more thing if i double click on the fs10n the another screen will open in the the total balances are matching in fbl3n and fs10n.
Please any suggest me to come out of this issue
Thanks in advance
Nandha

Posting stock entry in previous period

Dear Friends
Can anyone pls tell, whats the how to post stocks in previous period.? Eg: previous month or previous quarter.
Rgds
Sumanth.Gururaj

Please refer following links-
- [Posting to a Previous Period|http://help.sap.com/saphelp_46c/helpdata/en/47/6102e749f011d1894c0000e829fbbd/frameset.htm]
- Stock In Previous period
- Post in previous period
Hope this can assist you.
Thanks & Regards
JP

How to post stock and what transaction codes

Hi gurus
If I created new material how can I post stock in to the material to process.
Ex:MMBE for stock checking.
But what is the t -code to enter some stock at materila.
also how what other transaction I can for stock posting at various scenarios.(I mean what other transaction codes for different things)
Thanks
Kris

Hi
Enter T.Code: MIGO
Select : Other
Movement Type : 561
In the item Details Entyer the material . enter the quantity. Plant and Storage Location.
Save it. CHekc the Stock In MMBE for that material.
Thanks & Regards
Ram

Wrongly posted stock

Similar Messages

Maybe you are looking for