Wrongs user Details showing in welcome text. "Masthead"

Dear all,
Can you please explain why Mr. xyz name is displayed when Mr. abc has logged into portal with his own Login ID?
In UME,,, all users realted details are correct.
Regards
Deepak Raikwar

Hi,
Check in User Admin whetehr the correct name is maintained over there or not. Check whether the Logon ID and the Name maintained for the same is correct or not. Still if it shows the wrong name, then just edit the user details and just change and set back the correct name and save it. Then open the portal in a new browser after clearing the cache. if nothing works then restart the portal and try again.
Thanks,
Mahendran B.

Similar Messages

  • Ichat user details showing as "another" user

    I have a MacMiniServer 10.8 that is running the Address Book for my company
    I have a shared AddressBook that all users access for all Company data
    Several of my users have been complaining that their iChat "User" name was being displayed as another member of staff.
    I have had them set their own "My Card" details to themselves.
    This then changes their own display name shown in iChat.
    However this then affects another member of staff.
    Then changing that member of staffs "My Card" changes either the original user or someone else.
    It does not seem to affect all users.
    I have tried getting users to create a "Local" Vcard in AddressBook and set "My Card" to that, but it is still affecting other users.
    Sometimes the users have a Local and a Networked address book entry both showing as "Their" card at the same time.
    Has anyone any experience of this and advice of how to stop this behaviour
    I asked this question under ichat "discussions" and was advised to ask it here also
    Regards Tony

    Hi
    enter their details (including
    credit card details) directly without logging in (is
    this bad practice?).I would not say this was "bad practice" as most sites where people pay for items by credit card are public. They do however use Secure connections to ensure that the data being sent to the server is protected.
    I will need to look into this further to try and figure out a way to kill the session, or at least mark it as old. However as a work around you can always clear the cache for items on the page. This will reset the values of the items. Create a Process to clear the cache after you have done all your other processing. This way at least if someone else visits the site using the same session id, there will be no data visible to them.
    PS. I would disable the ability for users to enter financial details in your app until this is fixed, as I personally would not be too happy that my card details could potentially be visible to anyone with the correct knowledge!!
    Chris

  • Previous User details showing on new forms

    A user of my application has reported seeing a previous user's details when using my application. I realise that this is caused by the user using a link with another user's session ID in the url, however I was wondering if there was a way to stop this from happening even when the session ID is in the url.
    Basically, I dont users from different machines to be able to access each other's sessions.
    I am using application express v1.5

    Hi
    enter their details (including
    credit card details) directly without logging in (is
    this bad practice?).I would not say this was "bad practice" as most sites where people pay for items by credit card are public. They do however use Secure connections to ensure that the data being sent to the server is protected.
    I will need to look into this further to try and figure out a way to kill the session, or at least mark it as old. However as a work around you can always clear the cache for items on the page. This will reset the values of the items. Create a Process to clear the cache after you have done all your other processing. This way at least if someone else visits the site using the same session id, there will be no data visible to them.
    PS. I would disable the ability for users to enter financial details in your app until this is fixed, as I personally would not be too happy that my card details could potentially be visible to anyone with the correct knowledge!!
    Chris

  • Wrong user details

    Each time I install a new app, the default registration username is not me, it is my business partners.
    If I look in address book under his name it says 'me' when obviously it isn't me.
    All other things are fine - The user account is me and I am logged in as me.
    We do share a .mac account and I am wondering if my machine is getting its information form that?
    Any ideas?

    In your adress book... go to your name, option-click and select as ME.

  • User Details iView - show an image as property

    Hi,
    I would like to add an image to the user details iView showing the gender of the person (e.g. male = blue icon, female = red icon).
    So the shown image must be depending on the users gender.
    Do you know if this is possible? Is it only a "simple" Layout render or something else?
    Showing icons should be possible I think (the collaboration visible status is also there). But how can I add own Icons representing a property?
    Would be great if you could tell me if this is possible and how.
    Thanks in advance.
    Stefan

    Hi Stefan,
    how do you add the text? As plain HTML? This would explain why it looks different from the rest of your text since plain HTML by default doesn't get the font style that is applied to other HTMLB elements.
    Three ways to style the text the way you want it:
    1) Use an HTMLB control which renders the font the way you want it (e.g. label)
    2) View the source code of your generated HTML. Find a text snippet which looks the way you want your text to look. Copy the CSS class and add it to your text for example with a span:
    <span class="classnameyoulookedup">Your Text</span>
    3) Add the styling you want directly inline to your text:
    <span style="font-size:...">Your text</span>
    I hope this helps,
    Esther

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • Wrong bank details are showing in dunning printout

    Hi,
    wrong bank details are shown in dunning report,
    Here system showing one bank account for normal gl's and
    showing another bank account for special gl's in the same printout and in the same company code
    From where these bank details are updated in the dunning printout(i.e which table or which field),
    If i want to change these bank account details in the dunning printout,
    how can proceed or how can i change,
    please suggest me, help is appreciated
    Points are guaranteed if your reply is helpful.
    Thanks & Regards,
    Shan

    Hi,
    Actually in dunning printout below mensioned sentence was displayed
    'Please pay amount to ***** bank account'
    In this i found that there are two bank accounts one is for Normal items and other is for Spl. GL items.
    I have to replace account Numbers, so suggest me how can i do.,
    Thanks in advance.
    Regards,
    Shan

  • TS1702 When I push updated apps it shows wrong user ID

    I Am trying to update my apps & it keeps showing the wrong user ID how do I change it to my user name

    You need to delete those applications and redownload or repurchase them from your Apple ID.
    (86297)

  • Show user details in an iview

    Hi,
    Is there an iview that shows the user details of the currently logged on user? I know the profile iview which is available in the context menu of a user.
    I'm looking for such an iview, but the difference is that I want to show it on the homepage, right after the user logs on.
    Who can help me with this?
    Thanks in advance!

    Hi,
    I expect you don't want to have the profile on the currently logged in user on the homepage?!?!
    If this is true, for what are you looking in detail? Maybe something like the component com.sap.netweaver.kmc.people.PeopleDetails?Uri=/ume/users/[...Escaped Unique ID of the User...]
    (This is the component being called if you click for example on a users (creator / modifier) name within KM.
    If yes, just write some wrapper iView which redirects to this component, calculating the needed URL parameter dynamically.
    Hope it helps
    Detlev

  • User metadata values is showing as plain text in Mysites after upgrading from 2010 to 2013

    We have upgraded our Mysite from 2010 to 2013, after upgrading User metadata values is showing as plain text where
    as in 2010 it has shown as hyperlinks.
    In Mysite 2010 by clicking on user metadata for favorite sports, Favorite Movies etc...it will give the results from search containing same value for other user
    by going to search results page. After upgrading it to 2013 (with 2010 UI) and running full crawls, I am able to search by clicking on any user property.
    After upgrading look and feel to 2013 version  these fields showing as plain text. Can anyone suggest how can we get hyperlinks and how can we make user
    metadata searchable directly by clicking on Property value from Mysite. Below screen print explain you the difference clearly.
    Santosh

    Hi Inderjeet, thanks for the update.
    I am running with SP1 + july2014 CU.
    Search is working fine, I am able to get search results from search page, here the problem is I cannot go to search results by directly clicking on a property.
    In SP 2010, If I click on favourite sports team, (Chelsea football) it will open search results page with all users who have given this team name.
    Where as in SP 2013, this data is appearing as plain text in mysites(Please note before UI upgrade, I am able to search as in SP 2010). You can notice the difference in my above screenshot.
    Is this default behaviour in SP 2013? Has anything changed or am I missing something.
    Santosh

  • LDAP user details not showing in Portal UME

    We have implemented kerberos single sign on using the kerberos xml datasource file and have the corporate LDAP as our UME source.
    However certain user details that are maintained in LDAP (such as department, street etc) are not being pulled through to the portal UME.
    We know the connection to the LDAP is OK as we can create new users and they appear in portal UME - its just that it seems to be missing several user attributes.
    Is this related to the settings in the xml file?
    And if so, what needs changing??
    thanks
    Simon.

    Hi Simon,
    all the attributes that are available in your LDAP can be made available in the UME via the dataSourceConfiguration. The default files does not include every attribute since these may vary from directory to directory. Please take a look at http://help.sap.com/saphelp_nw70/helpdata/en/b7/14d43f2dd44821e10000000a1550b0/frameset.htm
    and especially at: http://help.sap.com/saphelp_nw70/helpdata/en/44/7d188751626fb5e10000000a155369/content.htm and http://help.sap.com/saphelp_nw70/helpdata/en/1a/2bee408a63732ae10000000a155106/frameset.htm
    Hope this helps,
    Holger.

  • Tabular Form - How to store in a column the User details (APP_USER)

    Hi all,
    I have let's say the following table:
    USER_COMMENTS(
    ID number primary key,
    COMMENT_TEXT varchar2(50),
    POSTED_BY_USER varchar2(50),
    DATE_POSTED date,
    UPDATED_BY_USER varchar2(50),
    DATE_UPDATED date)
    How do I, using a Tabular Form, get the USER details in the columns POSTED_BY_USER and UPDATED_BY_USER and the SYSDATE in DATE_UPDATED...
    I've tried the following:
    Created tabular form, all fields included. In Report Attributes > edit UPDATED_BY_USER > Display as Display as Text (saves state); Default Type: Item (application or page item); Default: APP_USER.
    It's not working.
    Thanks!
    Andrei

    It has to be a text field column type with source like the other updatable columns. You should hide that column and create a second of display as text if you want to show the content. Once this is done then you can use the default value and just type the item name there as you did:
    P1_ITEM
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    ------------------------------------------------------------------------------

  • Extending user details: Label in user Profile

    Hello,
    I have followed the document "How to Extend User Details" to add custom properties to user details. However, although it is possible to add labels to the user details iView (which you can access from KM), it does not seem possible to add labels for these properties on the User Profile (which you access through Personalize->User Profile).
    I have checked <a href="https://www.sdn.sap.com/irj/sdn/thread?forumID=42&threadID=129068&messageID=1443674">this</a> post, and the answer refers to the User Details iView, not the User Profile maintenance.
    Regards,
    Martin

    Hello Anja,
    This is a nice surprise (I remember you from your visit here to SA Breweries).
    The labels display fine in the User Details iView, but in Personalise -> User Profile, only the field names show up, the way they have been defined, e.g. expertarea, as opposed to "Expert Area", just as in the screenshots in the How-To Guide. The entries save without a problem.
    In other words, the field labels show up just as you defined them in UM Configuration, but you have no ability to change them to proper descriptive texts (as you would with KM property labels).
    Regards,
    Martin

  • How do I get the Manged bean and Taskflow logic for Disable button in User details Modify page

    Hi,
    I have a requirement where I have to add to custom buttons like "Terminate" and "Reinstate" in the users detail page. Terminate is closely modeled with "Disable" button of user details page. Before I develop the custom beans and register the task flow for the custom button, I just want to understand the logic written in the managed bean for "Disable" button and understand what is there in its associated task flow. Am trying to get these details from OIM. Not sure where exactly I can get the code for this and customize as per my requirement.
    Please suggest the exact location?
    Raghu

    Thanks for the information - I still was hoping that the article Mario mentioned above was accessible (perhaps just moved)?  Somewhere on the BC system?  Just so I can add it to my BC help folder - as well as even share it with clients who want to try things on their own (best to give them some help in that direction so they don't fumble through things).
    I have the checkout form populating information, if they have purchased in the past it will populate their address - but I am also trying to get their "account page" to do the same  (basically show them what their current information in the system is - then allow them to update whatever might be wrong or need changes).  We have a login page, for people to sign up without having "bought" something - so the CRM won't have their billing/shipping info in the system yet.  Trying to capture that without a purchasing being made.

  • Mac App Store update: right Apple ID but wrong user account

    My Mac App Store updates get associated to the wrong user account but the correct Apple ID.
    I live in Germany and have an iMac and a MacBook Pro, both purchased under Snow Leopard and now running Lion 10.7.2. Just after upgrading to Lion I "purchased" a free App (BibleReader 5.0.0). This morning I logged into my wife's user account on the MacBook Pro, and the App Store icon flagged an update. I switched to my user account and was surprised to see that the update wasn't flagged there. By listing my purchases I did suceed in finding an "update" button for BibleReader, but pressing it resulted in a (German) error message whch translates as "An update is available for another account. Please log in with the account you used to purchase the App". But that is what I had just done.
    Intrigued I went back to my wife's user account. By logging onto the Mac App Store with my Apple ID from my wife's user account I did manage to update the app. Later at work I got the same error message on the iMac. But this time the only other user account on the machine belongs to Computing Services: I don't have their password and I ought not to use admin rights to gain access to their account. So I can't perform the upgrade on the iMac.
    All family iTunes / App Store purchases are via my main Apple ID. My wife's user account on the MacBook Pro only exists so that I can manually synchronise our iCloud address books (she has an iPad).
    Any ideas?

    Welcome to the Apple Support Communities
    All the applications you purchase on the App Store are registered to your Apple ID, so you have to use your Apple ID to update them, or you have to purchase those applications again using the Apple ID they are using on that computer, so they will be able to update them

Maybe you are looking for