WRT 120 Internet Access Control Problem for itouch

I've just set up my router. Cannot seem to control access to the internet for my son's itouch. The router recognizes it on the map as a wireless device part of the network, but it will not show up in the menu that allows for internet access control. My lap top shows up, but no itouch. I'm running Windows XP home premium edition - not sure if this makes a difference.

Open the linksys setup page...Under the Wireless tab,Change the Channel Width to 20MHz only,Channel to 11 and click on save settings...Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings... 
On the I-Touch..Go to Settings>>>General>>>Reset>>>Now select Reset Network Settings.This will now reboot and restore you network connections.

Similar Messages

  • My kids have figured a workaround for the internet access control

    I was quite happy with Network Magic until my kids rendered it fairly ineffective by a simple workaround. The internet access control seems to be tied into each PC's clock. So, my kids simply change the time on the computer and ... Voila! Internet access whenever the parents aren't around. I was kind of hoping the internet access schedule would be linked to the time on the router. I'm hoping this can be fixed.
    Message Edited by molsoncdn on 12-13-2009 06:58 PM

    Hi, set your kids user accounts to not be admins, and set the BIOS password, this will migate that workaround.
    My Cisco Network Magic Configuration:
    Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
    Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
    Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
    Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
    Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

  • Internet Access Control

    Hi.
    Is it possible to keep track of the quantity of internet content received(in bytes) on a client machine?
    How does the proxy server allow or disallow internet access to a subset of clients (or one client) in the LAN to which it is connected.
    Thanks

    miraglia wrote:
    I am using Network Magic version 5.5.9195.0-Pure0, platform version 11.2.9195.1 on a couple of Windows 7 laptops and I am finding when I set the Internet Access Control to "Prevent" that some websites like the www.yahoo.com and www.google.com can be still be accessed.  I thought "Prevent" was supposed to completely turn off internet access?  I also have BitDefender installed on these laptops for anti-virus and firewall and it includes parental controls, also, which I currently have set to always on for internet.  Is BitDefender conflicting with Network Magic?  Is there a way to get them to work together?  I want to be able to turn off the internet so my kids can't get on whenever they want to.  Thanks.
    This won’t work anymore since HND is obsolete and I believed it is not actively maintained anymore. http://homecommunity.cisco.com/t5/Home-Network-Defender/Is-Home-Network-Defender-still-supported/td-...

  • Cisco Secure Access Control Server for Windows 3.0

    I have to rebuild a server using Cisco Secure Access Control Server for Windows 3.0 ... I cannot locate this software under "download software" in cisco.com ..
    where can I download a copy for Cisco Secure Access Control Server for Windows 3.0 ?

    Hi,
    You can not download the ACS windows Solution engines softwares from the cisco.com > download pages as these s/w are not available there. You can only download patches and remote agent software.
    In order to get any ACS software/ upgrade assistance you need to open up a TAC case.
    Also, ACS 3.0 is not supported by Cisco anymore..getting support for this version or any 3.x is not possible.
    HTH
    Regards,
    JK

  • Is July 9 internet issue a problem for Mac Pro users?

    Is the July 9 internet issue a problem for Mac Pro users or has Apple taken care of this issue in updates?

    It is a only a problem for users affected by the malware that replaces their DNS IPs on their macs. They already have a serious problem which they should fix. Follow the url in sig's post to determine if you are infected and how to remove it.

  • E71 PC Internet Access DNS Problem

    Hi all,
    Got a bit of a problem which I hope someone knows the answer to.
    I'm currently triailing tethering on an E71 for our corporate network.  I've got the phone connected up and installed Nokia PC Internet Access on my machine; all good.
    The problem I'm having is that we use a private APN at the mobile carrier to connect back to our network, and this does not advertise automatic DNS settings to clients.  I can get connected to the APN no problem at all but without DNS servers on the connection, it's fairly useless.
    Now, I can see that the PCIA application uses Dial-Up Networking behind the scenes to actually connect up, and I have tried to specify manual DNS servers on that connection, but every time I reconnect using PCIA, it resets everything back to automatic, which doesn't work.
    Anyone got any ideas on forcing manual DNS servers on a connection when using PC Internet Access?
    Thanks all!

    Nobody? This is the way how Nokia does NOT care us. Nokia is now dead

  • Internet Access through TMG for all HO & Branch office

    Dear Experts!,
    I am new to the Forefront TMG 2010. Have requirement to implement internet access.
    Head office : 192.168.11.x/24 (192.168.11.1 is the TMG server)
    Branch Office 1: 192.168.12.x/24
    Branch Office 2 : 192.168.14.x/24
    Branch Office 2 : 192.168.16.x/24
    Forefront TMG 2010 standard edition.
    Having 3 NIC's two have different ISP network addresses and one has 192.168.11.1.
    Branch office are connected using MPLS network, the requirement is all branch site internet must be accessed through TMG 2010 server which is homed in Head Office. How to achieve ?
    What needs to be done in external firewall and in TMG for enabling internet access.
    Thanks!
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    Hi Ganesh,
    Hope this helps
    1 - If you wish to give internet as Proxy to users.
    Ensure the Below subnet is able to reach TMG Internal Interface that is 192.168.11.1
    Subnet
    Branch Office 1: 192.168.12.x/24
    Branch Office 2 : 192.168.14.x/24
    Branch Office 2 : 192.168.16.x/24
    Configuration
    Enable Proxy in TMG and configure Proper Ports as per your requirements
    On the Client IE – Ensure you put Proxy IP as TMG and Port configured in TMG configuration.
    Enable a Rule
    Access Rule
    Source : Internal
    Destination : External
    Ports : HTTP / HTTPS
    Users : Authenticated Users
    2 As normal Internet as Gateway to users
    You need to request your MPLS provider to change the Default Route of below subnet to 192.168.11.1. By doing this, all the internet request from the below subnet to internet will hit TMG.
    Subnet
    Branch Office 1: 192.168.12.x/24 Default Route 192.168.11.1
    Branch Office 2 : 192.168.14.x/24 Default Route 192.168.11.1
    Branch Office 2 : 192.168.16.x/24 Default Route 192.168.11.1
    IF you have any L3 Switch then you can also make Default gateway as L3 for all the subnet and from L3 device point it to TMG
    Enable a Rule
    Access Rule
    Source : Internal
    Destination : External
    Ports : HTTP / HTTPS
    Users : All Users ( Important )
    Two ISP
    In network Rules : You need to use NAT
    You will have a Rule which NATS internal to  External
    On external - Choose which ISP interface should be used  and Apply NAT rule

  • Require MAC (Media Access Control) address for my ...

    Hi
    I recently bought the Nokia C6.
    I want to connect to my WiFi network in my office.
    My network administrator require the MAC (Media Access Control) address of my set to give me access to the network.
    How can I find this address for my set?
    Solved!
    Go to Solution.

    On home screen:
    Open the number keypad (button in the middle in bottom row) and then dial *#62209526# (equals *#MAC0WLAN#) => Device will show your WLAN MAC address.

  • ADF Authorization for ADF Mobile:Configuring Access Control URL for ADF App

    Can someone explain, how to expose weblogic user roles as a Rest Json Api? Basically I want to set up Access Control URL to authorize users on adf mobile.

    Hi Frank,
    This is what I did. Could you please let me know if I am doing it right.
    1. Created an adf application with a simple page and applied security basic http authentication.
    2. Added a rest service implementation in the same application, changed the adf application web.xml as below
    <servlet-mapping> 
       <servlet-name>jersey</servlet-name> 
       <url-pattern>/jersey/*</url-pattern> 
      </servlet-mapping>
    3. When I test the rest service in browser, it asks to log in and returns the user roles. Below is my rest implementation
    @POST
    @Produces(MediaType.APPLICATION_JSON)
    public User getMessag3() throws Exception {
    return new User();}
    the rest service returns the logged in user roles in below json format.
    {"userid":"susant","roles":["SSBAccessGroup","authenticated-role","SSBAccessApp","anonymous-role"],"priviledges":[]}
    Do I need to implement anything on the ADF mobile side or I can just add the rest service url to the authorization tab. Will adf mobile automatically handle sending the http request.
    Actually I just added the rest service url to adfm-applications connections authorization tab and I am getting ACS failed error after log in.
    Thanks

  • New Access Control tab for Distribution Lists

    Is it possible to add user to the access control list using Admin API?
    If yes, then how?

    Currently, no.
    John
    "testowy email" <[email protected]> wrote in message
    news:[email protected]..
    >
    > Is it possible to add user to the access control list using Admin API?
    > If yes, then how?
    >
    >
    > --
    > testowy_email
    > ------------------------------------------------------------------------
    > testowy_email's Profile: http://forums.novell.com/member.php?userid=77987
    > View this thread: http://forums.novell.com/showthread.php?t=417439
    >

  • New MBP - wireless/internet access networking problem - a summary!

    Greetings!
    New MBP here, with all the trimmings (MacOS X 10.4.10 - Safari 3 Beta). New also to the Apple/MAC world
    MBP >> wireless networking into a Linksys WRT54G router and >> thru HughesNet DW7000 Satellite Internet connection (not the fastest, but hey, the US and especially rural areas are NOT S. Korea when it comes to speedy internet connections!
    Frankly, I bought into it for two reasons: First, hearing about the vaunted Mac a/v/ and doc/photo editing capabilities,... and about MacOS stability, etc... Well, it all needs a little work still: on the part of new users like me, but also probably on the part of the Apple/Mac people as well. 2nd reason I decided to purchase the MBP - i.e. ability to run Windows (I have not yet tried BootCanp, etc...: still resolving preliminary issues!). I still live in a heavy Win environment at my business - no other way of course!
    Communications issues seem to still prevail: I am hanging out at several VERY HELPFUL forums (AppleDiscussionForum, MacRumorsForums, etc...) and the same issues keep popping up. Im my case, same as all above reported, with a few additional points, as follows:
    1. Xmission errors: seem to be - at least in my case - a constant factor, regardless on how close/far i am from my wireless router. For example, I would be attempting to dwnload an upgrade (large)QT or MacOS file. i am barely into the dowmoad, and I already have several Read/Send errors. By the end of the download, I will have probably about 15 Rcv and 5 Send errors. Never gets quite that bad in my Win machines, I must mention. Anything to do here (I know, there are such things always affecting wireless com). AND, MOST importantly, how that this affect the effectiveness of the upgrade (I spotted same thing with MacOS 10.4.10 and Safari Beta 3 upgrade downloads!). Would it be likely that applying upgrades in such circumstances would screw up the OS??? Could OTOH such errors be automatically "compensated" by re-xmits from the source, and eventually the download would be OK? Because quite frankly, I do NOT know if my important upgrade download was OK to apply to the system, given those errors!!!
    Also same thing with PING errors. Quite frequent when pinging another device on my network.
    2. Quite often, accessing a site will proceed somehow OK, and then things will get stuck twd the end, as if some buffer somewhere gets overloaded??? Of course, as elsewhere reported, same can often happen with com getting stuck right over the "www" part of the URL!
    3. AND, of course, the often reported "NO connection to the Internet", but computer shows good signal level and connection otherwise.
    4. Strangely enough, seems that the Airport Extreme wifi card sort of "warms up the the internet" as one proceeds to start using it. It eventually picks up on a network, and often "improves" its connection over time!
    5. Built in Airport Extreme seems to not exhibit up all immediately surrounding networks. Sensitivity issue?? iStumbler does.
    6. iStumbler permanently posts noise level of 9% regardless of how close to my wireless router/broadband modem I am. Anyone uses iStumbler to monitor network traffic?
    This is getting longuish: I just want to get over all those p*ant issues and get into putting my a/v stuff together!!
    - Roger T
    Thanks for just reading all this!. I am not sure it is all fixable (back to the Win "features" terminology, really meaning "bugs"??)

    Thanks, BDaqua. This support forum is quite well stocked: I have been perusing all its nooks and cranies!
    On the www.dslreports.com - All things Mac - forum, I spotted a couple of mentions of the following type of infromation:
    link: »www.hardmac.com/news/2007-07-27/#7039
    - The first TechNote provides information concerning the Airport problem affecting the MBP Santa Rosa (but also other Mac Intel). When used on battery, the wireless connection drops and one can even experience kernel panic. Apple Centers are asked not to exchange affected notebook as this is due to a unidentified bug in the Atheros driver, and should be fixed in the future with a simple Airport system update. So for the moment, unfortunate users are asked to directly power their notebook when using wireless network, or using Ethernet connection when running on battery... in other words, turn your notebook into a desktop
    to forum · permalink
    I am wondering if you and folks on this close-to-Apple forum know anything about this. At least, we could just await remedy instead of messing around endlessly looking for solutions and... pondering as to whether it was a wise thing to purchase an expensive machine which happens to have trouble communicating online. After all, seems that the Mac folks are prone to spend MORE time online uploading/downloading music and videos instead of my being normally doing with the rest of my (Win) computers, i.e. work on customer lists, correspondence, inventories, accounting, data bases, etc....
    So, seems to me we do have a pb and Apple might just save a few $$$ on silly ads and get to work on com instead. if nothing else to avoid the appearance of further - admittedly rather funny - ad-spoofs!
    So back to your further inquiry. I run a wireless network from a HughesNet satellite modem, thru a Linksys WRT54GL wireless router, into some nearby office LANed desktops and point of sale equipment, to another neighbouring facility via wireless bridge, and to my Mac laptop. Distance from the laptop to the router: 50 ft max.
    It all works surprizingly very well: up to 200kbps up and 1000 kbps down (in prime time, 150 up and 600 down). OK, my set up looks complex and incurring LOTS of activity. Actually, online activity is quite minimal and well scheduled - right now I am the only machine on the network online. Otherwise, our office processes online money wiring for customers among other things.
    I'll try your DNS server choice on the Mac settings first. Will report accordingly.
    Thanks for everything!
    - Roger T

  • Internet access via hairpinning for Spoke to Hub IPSec VPN

    I have a hub and spoke configuration with a number of site-to-site IPsec VPNs from 857's terminating on an 1811 at the hub. Also in the mix is a client-to-site (EZVPN) which also terminates at the hub.
    I need to ensure all traffic destined for the internet goes out through the hub 1811. I've looked at trying to use a form of hairpinning so that "interesting traffic" from remote sites gets NATted at the hub router to the internet.
    I have seen a number of configurations (in these forums) where internet-directed traffic from EZVPN clients is forced via a hairpin out via the hub router. I am trying to emulate that feature with the site-to-site IPSec VPNs - where internet directed traffic from spokes must go through the hub router, and not be permitted to go directly to the internet from the spoke routers.
    Attached are configs for the hub router and one of the spoke routers, and a pdf diagram.
    I can get traffic to the internet (in my test lab) from the lookback connector (1.1.1.1) by extended command pings, I have connectivity from the spoke1 lan to the hub lan (pings again); but not from the spoke1 lan to the internet via the hub router.
    Thanks in advance for any help
    Phil

    Thanks, guys. Yes, those two access lists did need some attention.
    I've changed the access list on the spoke router from
    access-list 120 permit ip 192.168.8.0 0.0.0.255 192.168.0.0 0.0.255.255
    to
    access-list 120 permit ip 192.168.8.0 0.0.0.255 any
    which allows traffic from the spoke lan out to the internet via the hub router. I've also taken NAT off the spoke router.
    But I also need to change the matching access list on the hub router. I changed the old access list from
    access-list 121 permit ip 192.168.0.0 0.0.255.255 192.168.8.0 0.0.0.255
    to
    access-list 121 permit ip any 192.168.8.0 0.0.0.255
    but I couldn't pass any traffic over the VPN. If I remove access-list 121 completely, then traffic does pass, but the crypto map on the hub router becomes "incomplete".
    When the tunnel is up, and passing traffic, I can ping an internet address (in my lab), but not all traffic is getting through. Every second ping times out, often there are 3 or 4 pings that time out.
    Any suggestions as to what to do with the access list (121) on the hub router, and what can I do to get more reliable results (i.e. get every ping to work)?
    TIA
    Phil

  • Internet access only available for a few seconds before dying

    I've just purchased a new iMac and I'm having problems connecting to the internet. I have a DSL modem router which is configured up and working correctly. I can plug my old PC into it and it works fine, however when I plug it in to my new iMac I have to reset it and then I get about 20 seconds access before it dies. The IP address is still assigned and everything but all traffic seems to stop. If I reset the router again, I'll get another 20 seconds access once it finishes booting. I don't think it's a router issue as I can plug a windows laptop in also and it works fine.

    Those settings would appear to be correct, so the computer is getting the IP number from the router.
    I tried a ping test against www.apple.com after resetting the router, and it was an unknown host . . . Yes, it gave me nothing either: 100% packet loss; but another www address was OK.
    If you enter that router IP number in a browser, do you get a configuration page for the router itself? Does the router need a WEP or WAP password?
    Have you also tried, (A) setting up a new Location rather than use the default, "Automatic" or (B) creating a new user account and setting up from there?
    What router do you have, by the way?

  • ADFMobile - Web service data control problem for android

    Hi,
    I created an application for android and testing it on an emulator.
    I am able to create web service data control for a jax-ws web service. But when I invoke the web service and the call comes to the web service host, there are no namespaces in some of the parameters. Typically, the tags which do not have the namespace are complexTypes. All the values of the parameters come properly. I have tried executing the data control in three different manners but still no luck.
    AdfmfJavaUtilities.invokeDataControlMethod(..);
    AmxMethodActionBinding.execute();
    +#{bindings.invokeMethod.execute}+
    Thanks.

    Hi there,
    Can you try to generate a sample JAX-WS the generates a similar complex structure that can help you and us to isolate the issue? I created a jax-ws service using simple complex type on Ubuntu and also a client mobile application getting no problems running it. But, perhaps you are using a more complex structure, hence an standalone would be very useful.
    Juan C.
    Edited by: Juan Camilo Ruiz on Dec 10, 2012 4:00 PM

  • HT3728 No status light at all on Airport/Time capsule. I can plug internet cable directly into bac of my MAC and have internet access no problem. Is my Airport dead and need to be replaced??

    I have NO status light on my Airport/Time Machine, I unplugged the internet connection from back of Airport and plugged directly into my MAC and am able to get to the internet just fine.
    The Airport is almost 6 years old
    Is my Airport dead and just need to get a new one??

    Is my Airport dead and just need to get a new one??
    Unfortunately, yes.  On the upside, your Time Capsule lasted about twice as long as normal.

Maybe you are looking for