WRT 120N- Cannot connect to the internet with more than one PC at a time.

Before I went on a three month vacation,I could connect 3 or 4 PC's either wireless or wired to my router with no problems at all.I have a desk top and a laptop computer which I use at home.After I returned,I found that I could connect to the internet with only one PC at a time.
If I was say,connected via my laptop,my desk top would continuously keep getting disconnected and vice versa.I have been reading the suggestions from experts here and have done a few checks based on them.I also cannot get to my router page which is 192.168.1.1 I keep getting a message that says "Problem Loading Page" and this happens with both,Firefox and Internet Explorer.I am running Windows 7 - 32 bit on my desk top and Vista Home Premium on my laptop.
I have opened the "Command Prompt" dialogue and pinged 192.168.1.1 and thereafter I typed in "ipconfig".These are the results:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Gordon>ipconfig
Windows IP Configuration
PPP adapter Brownwolf:
   Connection-specific DNS Suffix  . :
   IPv4 Address. . . . . . . . . . . : 92.98.42.65
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . : 0.0.0.0
Ethernet adapter Local Area Connection* 22:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix  . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:35a2:8753:8832:f494
   Site-local IPv6 Address . . . . . : fec0::c:35a2:8753:8832:f494%2
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:35a2:8753:8832:f494
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:a408:59a3:918e:f0ab
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:a408:59a3:918e:f0ab
   Link-local IPv6 Address . . . . . : fe80::35a2:8753:8832:f494%12
   IPv4 Address. . . . . . . . . . . : 192.168.0.1
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix  . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:413:cf4f:77af:474d
   Site-local IPv6 Address . . . . . : fec0::c:413:cf4f:77af:474d%1
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:413:cf4f:77af:474d
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:1591:ad9:13da:8fea
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:1591:ad9:13da:8fea
   Link-local IPv6 Address . . . . . : fe80::413:cf4f:77af:474d%11
   IPv4 Address. . . . . . . . . . . : 192.168.1.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : fe80::35a2:8753:8832:f494%11
                                       192.168.1.1
Tunnel adapter Local Area Connection* 7:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
Tunnel adapter Local Area Connection* 14:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
Tunnel adapter Local Area Connection* 15:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
Tunnel adapter Local Area Connection* 19:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
Tunnel adapter Local Area Connection* 20:
   Connection-specific DNS Suffix  . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41::5c62:2a41
   Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
Tunnel adapter Local Area Connection* 23:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
Tunnel adapter Local Area Connection* 24:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
Tunnel adapter Local Area Connection* 28:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
I presume that this model is a modem **bleep** router as I do not have a separate modem with my system.I have a DSL connection and the firmware version of my router is ver.1.0.If I recall,I did upgrade to the next firmware upgrade a few months after I purchased the router but I am not sure.
I use both my PC's to run a small business venture and I am worried that resetting the router may cause some other problems and will stop me from using the internet.
The Command Prompt information above was taken from my laptop.
Any help will be really appreciated.
Gerard.
Solved!
Go to Solution.

brownwolf66 wrote:
No,I have a desk top and a laptop and I cannot access 192.168.1.1 on either of them.In my OP,I have used the Command Prompt dialogue on both computers to ping 192.168.1.1 and I have attached the results.This is what I got:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
The results I obtained using ipconfig in the command prompt have already been mentioned in my OP.
I do not know if the above result is what it is supposed to be but I still cannot access my router's home page.How do I verify if there is a proxy server and if there is one,how do I disable it in my browsers?This problem occured suddenly as a few months earlier all was well.It's getting rather frustrating.
I suggest resetting the router. Make sure firmware is updated. You can download it here - http://homesupport.cisco.com/en-us/support/routers/WRT120N. After firmware upgrade, reset and reconfigure. Just access the link below to guide you setting up the router.
* Setting up a Linksys router for DSL Internet connection
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
* Setting up a Linksys router with Cable Internet service
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

Similar Messages

  • When texting with more than one person at a time the incoming text scrolls to top of the conversation. anyone out there with the same issue?

    while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?

    I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
    "How do I text message multiple people at once?"
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
    You can ask Apple for iPhone changes via this link:
    http://www.apple.com/feedback/iphone.html
    Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
    (If this has answered your question, please mark your original post as answered)

  • Get the data with more than one of the desired value

    Hi,
    I need to pull the records with more than one value of 'Other' on the delivery days fields.
    The delivery fields are mon,tue,wed,thu,fri and sat that tells the where the item will be delivered. The value can be Home, Work, or Other.
    Here is the Sample data:
    cust_id: 123
    item: newspaper
    mon: Home
    tue:Work
    wed: Other
    thu: Home
    fri: Other
    sat: Other
    And here is my query so far.
    select
    cust_id,
    item,
    mon,
    tue,
    wed,
    thu,
    fri,
    sat,
    sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1
    else 0 end) as day_ctr
    from customer
    Could you please help me with the right formula I need to get this?
    Thank you in advance..

    First
    DESC customer
    Second
    Can you explain what you are trying with
    sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1 else 0 end) as day_ctr
    Third
    Usually it's helpful a example of the result you want...
    Perhaps you want this
    select DECODE(mon,1,(select distinct mon from customer), 'OTHER') mon,
            DECODE(tue,1,(select distinct tue from customer), 'OTHER') tue,
            DECODE(wed,1,(select distinct wed from customer), 'OTHER') wed,
            DECODE(thu,1,(select distinct thu from customer), 'OTHER') thu,
            DECODE(fri,1,(select distinct fri from customer), 'OTHER') fri,
            DECODE(sat,1,(select distinct sat from customer), 'OTHER') sat from
    select
    COUNT(DISTINCT mon) mon,
    COUNT(DISTINCT tue) tue,
    COUNT(DISTINCT wed) wed,
    COUNT(DISTINCT thu) thu,
    COUNT(DISTINCT fri) fri,
    COUNT(DISTINCT sat ) sat
    from customer
    )

  • HT5622 Can Face Time be used to connect with more than one person at a time?

    Can I connect with more than one person at a time when using Face Time?

    You mean like a conference call?  No, unfortunately.

  • Can I use a magic trackpad with more than one Mac at a time?

    I am attempting to pair a MTP with a second MacBook Pro.  So far I can't get system preferences to find the MTP.
    I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
    The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac.  To do this, you first remove the existing pairing and then pair the trackpad again'.
    Can anyone advise, please?
    If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
    Thanks

    Yes, your keyboard, mouse or trackpad can be paired with multiple Macs.  You can even have multiple keyboards, mice or trackpads paired with one Mac.  The caveat is that the device can only be connected to one Mac at a time.  The device can't be paired or connected with a Mac while it's currently connected to another.
    Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other.  The device will connect with the first available paired Mac and then unavailable to the second.   If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on.   I do this with a keyboard from my iMac to a Mac Mini in another room.
    Captfred

  • Is there a stereo bluetooth headset that can pair with more than one device at a time?

    Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
    Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
    The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
    I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
    Appreciate any and all input. My Googling has returned no results.
    Rick

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • HT1040 Is there a way to place an order with more than one item at a time? For example I am going to make a few books and have them all shipped to me.  Do I have to order and pay shipping for each one individually?

    Is there a way to place an order with more than one item at a time?  for example I am making a few books and having them all shipped to me.  Do I have to order each one separately and pay shipping each time?

    You have to order each book separately, if the books are different. Only multiple copies of the same book can be ordered in the same order, see here
    Regards
    Léonie

  • Can a user facetime with more than one user at a time

    I can use facetime with Macbook and connect to another Macbook user on another WIFI network... I was wondering if one can facetime with more than one user at a time?

    ellis911 wrote:
    I can use facetime with Macbook and connect to another Macbook user on another WIFI network... I was wondering if one can facetime with more than one user at a time?
    Only if you have more than one device running FaceTime at your end.
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • I downloaded version 4 and now I cannot connect to the internet with firefox. The lower version worked fine. It keeps saying I'm offline. Any suggestions?

    I have used the older version of firefox and it worked fine. I downloaded version 4 and now cannot get on the internet with firefox. It keeps saying I'm offline and to check a particular box to correct the problem. I have no idea what they're talking about and would appreciate any help.

    Ah I figured it out.....Mcafey was blocking it. Why on earth did AVG being uninstalled update mcafey settings, to block firefox?

  • Cannot connect to the Internet with browser when using VPN

    I am experiencing an odd network problem and am hoping that someone on this list has seen something similar and can help me isolate the cause.
    I have a Mac Pro running Mac OS X (10.5.8) and use Cisco's VPNClient to connect to my employer's network. Some time in the last year I started getting this odd behavior wherein that while connected via VPN, I cannot open external web pages in Safari (Version 5.0 (5533.16)). When this happens I get the following message:
    +Safari can't open the page "http://www.google.com/" because your computer isn't connected to the Internet.+
    Web pages on the company's internal network work fine. Firefox exhibits the same problem. However, the very odd thing (to me), is that I can get to the Internet using the browser in NetNewsWire. Other services (like twitter) also seem to work fine.
    The problem is intermittent and occurs between restarts. After some restarts the problem is not there. Also, connecting and re-connecting via VPNClient does not affect the behavior. If access to the Internet is working then it will continue working, at least until the next restart. If I restart for whatever reason (software update, etc.) the next time it may or may not work.
    This has been going on over several updates to Mac OS X and Safari.
    Another clue is that my MacBook, also running 10.5.8 works fine when connected from the same home network so I am pretty sure the problem is with my Mac Pro.
    Anyone out there have any idea what could be causing this and how to go about fixing the problem?
    Thanks in advance,
    KP

    Earthlink can be challenging. Have a look at this
    very helpful post from Eme.
    This may lead you in the right direction.
    World leaks relates to memory issues with Safari that
    are on-going and being addressed in the developer's
    community. More information can be found
    here.. To
    stop the warning message, go to your Debug menu and
    deselect "always check for world leaks".
    iMac G5 Rev C 20" 2.5gb RAM 250 gb
    HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac
    OS X (10.4.8) LaCie 160gb d2 HD Canon i960
    printer
    I couldn't fix it, and the Earthlink technician couldn't fix it...until she checked and found that the starting address: "www.my.earthlink.net" is down. In fact, it's still down, so I'll just continue using Foxfire for awhile. I can connect by typing "www.earthlink.net" in the addres bar, but it's so much easier to just click on Foxfire in my dock. This shows the value of having a spare browser.
    I'm going to mark it "solved. Thanks for your help, It was a bit technical for me, but I tried. I had to, having just sent an article about the value of persistence to a friend, how could I fail to persevere?

  • Cannot connect to the internet with laptop

    Background: Started out with iMac connected to Apple Airport Extreme base station via wireless that is connected to broadband/cable linksys modem befcmu10. Then setup Apple Macbook 13" to access internet through Apple Airport Extreme base station via wireless. Worked fine, spectacular. Then setup HP Photosmart C6180 All-in-One printer to be accessed through Apple Airport Extreme base station. Again, worked flawlessly. Then setup and "installed" an offline internet Skype phone [Philips VOIP8411B/37] so I could use it's services and not need a computer to be on. It's connected to the Apple Airport Extreme via Ethernet. To get it up and running, I had to reboot my modem and router. Right after I got it up and running I noticed that the Skype phone was working and the iMac was working but the laptop was now not able to connect to the internet.
    Present: Finally able to get back to finding a solution, I was trying to look at settings in the network system preferences and researching things to try. Also going to the Airport Utility program trying different things like having it distribute IP address and having it find DNS servers automatically, etc etc etc. Nothing was working to get the Macbook back online. So I rebooted the modem and router again [because i have been experiencing problems with cable company] just for the heck of it. Wa-la, the iMac and laptop were now both using the internet. But before I realized what was happening, the Skype phone was not able to establish a connection. So before I stopped for the night, I shut everything down and rebooted the cable modem and router.
    Next morning I awoke and the Skype was working but the iMac and Macbook weren't able to connect. After trying to fiddle with System Preferences and Airport Utility I resorted to reboot the modem and router. iMac worked, Macbook didn't, Skype worked. After a full day of researching, reading and fiddling with preferences on the macs end, I decided to try the reboot of modem and router. Got iMac online, Macbook online, Skype not.
    Discovered problem: Apparently only two of the three devices can connect to the "internet" through the Aiport Extreme base station at a time. So right now, I have to sacrifice one device not to connect to the internet. It's the Macbook for now. From what i can see, the use of the printer is not affected [but it's only setup on the iMac].
    I've gone into the network diagnostics on the Macbook and under Network Status on the left, Airport, Airport Settings, Network Settings, and ISP are all green, while Internet and Server are yellow for a second while it searches but turn red and stay red. Contacted cable company and everything is good on their end and they couldn't help further. Something is wrong on my end. Now on to apple care or forum help.
    Does anyone have a solution or suggestion of what to do or where to look? Do I have to change something in the Apple Airport Extreme base station? Network setting? Any help would be much appreciated, it's frustrating and time consuming and I'd like to get it all up and running.
    Thank you for your time.
    BCSlck1

    I don't have an answer, but I experienced the same problems trying to set up an airport express to route traffic to my stereo.
    Apple Extreme router, iMac and laptop all worked just fine for months, upon installing Airport Express (step by step, according to instructions), all **** broke loose. Airport Utility was unable to see my Airport Extreme router, after hours of rebooting computer, cable modem, router, and finally a hard reset of the Airport Extreme router, it is finally recognized by Airport Utility again.
    Recreated network, iMac connects to the internet just fine, laptop (Macbook Air) connects to the network just fine, but will not connect to the internet. Network diagnostics does not help, it gets to the "do you have a router? If so, reboot" stage, and never seems to see the router.
    Any suggestions?

  • I have AirPort Extreme and cannot connect to the internet with a land line but the WiFi works

    I have an AirPort Extreme and have been using for several months successfully, but as of two weeks ago, the line that I have hooked up to my desktop no longer provides internet service, but the WiFi works fine for the I-Pad and I-Pod.
    I have checked with my service provider and my modem works successfully hooked up the the AirPort extreme or directly to the PC.  When I am hooked in from the modem directly to my PC, I have internet for my desktop, but of course no WiFi.
    If I connect the Modem to the Router and the router to my desktop, I have WiFi, but no internet service to my desktop.
    I have replaced the network cable but to no avail.
    Any suggestions?

    It appears that there may be something amiss with the Ethernet switch that is built-in the 802.11n AirPort Extreme Base Station (AEBSn) or its configuration settings may be incorrect. I assume that you also tried using the other LAN ports on the AEBSn and the outcome was the same ... no Internet access via a wired connection.
    One thing to try is to change the Ethernet adapter settings on the PC. It is possible that its current settings may be appropriate when connected directly to the Internet modem, but may be off for connecting to the AEBSn. If your PC's Ethernet adapter has options to control Speed, Duplex, & MTU, I would change these to the following respectively: 1000 Mbps, Full duplex, & 1500

  • Cannot connect to the Internet with my Sun Ultra 20 Workstation

    Hi Everyone,
    I am very new to Solaris world. I have an Ultra 20M running Solaris 10 (x86), and a Linksys 350N router connected to a cable modem. But I am not able to go online. Please can you help me with the commands or steps I need to take for configuring the Solaris for accessing the Internet ?.
    Any help, is much appreciated!
    Thank you,

    Are you using the router to do any verification the cable company needs? I assume so and if you are not I would set it up so it does (if it is even needed with cable internet).
    After that it should be simply a matter of turning on DHCP. The easiest way is to type sys-unconfig as root. That will 'reset' all of the important network settings. Choose dhcp. The default router address is probably something like 192.168.0.1 or 1.1
    I believe that will be both your gateway and dns.
    This all assumes you are using the router as a router and not a switch.
    You can then use the router as a firewall and dmz your ultra if you feel like connecting to it from the outside (if you have a static ip for your router).
    Same goes with windows, linux, BSD, Apple etc... nothing solaris specific but the sys-unconfig bit.

  • TA48312 I'm using iTunes 11 final version on my pc windows 7 and I cannot connect to the internet with any of its feautures. why? I'll be grateful if you help,thanks in advance.

    Hi everybody,
    First of all I was not one of iTues users till by chance discovered its amazing features of downloading all kinds of items that help in education in particular. I set up iTunes version 8 I gusse and it was working properly either by using direct connect to the material or downloading it. Then, I made I mistake when I tried version 11 and everything stopped working. No downloading or even connecting the web. I'm a student and I'm in a bad need to this wonderful programme. I must not forget that I tried many steps to solve this problem by uninstalling iTunes with its contents from its roots till registry files, and I set up the old version once and then the newer version 11 and finally version 9 and all my trials were in vain. Please I need your help and advise. I'm looking forward for your reply and thanks in advance for your care.
    adam karim,

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Can i pair my BB8330 with more than one device at a time?

    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    Solved!
    Go to Solution.

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

Maybe you are looking for