Wrt 160n router using N adapter

Have a 160N router that has performed fine using my G wireless adapters. Recently installed a wirless adapter with 300 mbps capability to attempt to to get the benefit of the "N" feature on the router. It works fine but it still connects at 54mbps, do i need to do somthing to get it to work at the higher speed?

What is the version number of the Router...?
Try the following settings on the router...
Under the Advance Wireless settings...Disable Frame Burst,Change N <script type="text/javascript">// // <![CDATA[ document.write("Transmission Rate") // </script> Transmission Rate to 15-130Mbps,Change Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Power Cycle the router and check.

Similar Messages

  • Dynamic Routing using AQ Adapter

    Hi
    I am using AQ Adapter to configure my OSB Buisness services to enqueue/Dequeue messages to my AQ queues.
    My requirement is to post messages to different Aq queues at runtime without having to reconfigure adapter everytime.
    I tried the routing options,It only allows me to change the endpt url which is the Datasource name in aq adapter, but it doesnot allow me to change the queue_name at runtime.
    Is there any other way of acheiving dynamic routing for AQ?
    Thanks
    Gayatri

    Thanks for your reply, but i guess i have not been successful in explaining my requirement clearly.
    I am not interested in changing the routing pattern at the AQ level using Alter propogation.
    My requirement is at one step above this while posting a message to the source AQ queue.
    For eg: My Multi consumer table name: Publisher_Table
    queues in my Publisher_Table: 1.Pub1
    2.Pub 2
    3.Pub 3 and so on
    I need to post messages on pub1,pub2 etc...however while configuring the AQ adapter for enqueue opertaion i had to hardcode my queue name to Pub1(One among multiple queues created).
    My query is whether i can have this queuename as a variable,so that at runtime i can change the target, instead of having to configure multiple aq adapters one for each pub queue.
    Thanks
    Gayatri

  • BizTalk routing using SMTP Adapter

    Hello, I have I an Orchestration , depending on STATUS field in Orch how can I send an email using SMTP Adapter ?
    For eg : if STATUS = OK, send email saying file is OK
    if STATUS = Error, send email saying file is Error
    if STATUS= Pending, send email saying file is Pending
    if Status =Paid, send email saying file is Paid
    How can this be achieved using dynamic send Port ?
    MBH

    Hi,
    Yes, you can achieve this using dynamic send ports.
    In decide shape you can check the Status (It can be distinguished field or based on XPATH).
    Dynamic Send Port where you set the appropriate email address on the message.
    Read
    this thread also about sending email dynamically.
    You can also refer some good discussion
    here.
    Please mark as answer or vote as helpful if my reply does

  • Unstable Connection With My WRT 160N Router

    It works fine on my wireless laptop and it rarely disconnect so I'm very happy about that. But on my PC which uses an ethernet cable, I get some problems. I have cable internet and everything seems fine for a while. On my PC, I can see the symbol on the bottom right hand corner indicating that it's connected to the internet but when I go on any website, my broswer (firefox) time out and nothing is working. To solve this problem I have to log into the router website at 192.168. 1.1 and as soon as I log in, my internet starts to work again. This can get very annoying. Is there like an option that keeps me connectivity from stalling or disconnecting? My wireless seem to be fine all the time.
    Thanks for your help. 

    There is a known issue with intermittent connectivity and the Build 11 firmware for the WRT160N V2. Build 11 is the current firmware on the Linksys site. Check to see if you have Build 11 if your router is a V2.
    Downgrading to Build 8 is generally accepted to correct these issues, however Linksys have indicated to several people they do not have the build 8 firmware to give to end users.
    This is ONLY for WRT160N V2 routers. This firware will not work on WRT160N V1.
    You can find it at http://audipages.com/router/
    Follow the dowload and firmware downgrade instructions on that page.
    Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
    D-Link DSM-320 (Wired)
    Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
    SonyBDP-S360 (Wired)
    Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
    IOmega StorCenter ix2 1TB NAS
    Linksys WVC54G w/FW V2.12EU
    and assorted wired and wireless PCs and laptops

  • WRT 160N: Internet Dropping one of two New Toshiba (Windows 7) Laptops.

    Can anyone shed any light as to why I would be losing my internet connection on one labtop, while I have 2 others (along with a desktop) and two iphones that continously hold their connections?  The desktop is running Windows Vista, one laptop is running XP and the two new Toshiba laptops are running Windows 7. 
    I have had this Cicsco Linksys (WRT 160N) router for about a year and it's been fine and all the connections hold just fine, until I bought my newest laptop 2 weeks ago.  It connects into the router just fine and holds the connection at times, but most of the time I'll get to the first website and then when I change it will get hung up and say it's not able to connect. 
    I would think that if it was an issue with the router maxing out (is there a maximum # of laptops that can be linked into the router?)  that I would have issues with all components and not just this Toshiba L675 laptop.  It show's that I'm connected to the router all the time, it just indicates in the network icon that it has "No Internet" until I refresh it.  I obviously want to refresh every 10 seconds and sometimes that doesn't even work.
    Any suggestions, as I'm seriously thinking about taking the laptop back, but I don't really think it's the laptop.
    I appreciate any insight any of you might have on this issue.
    Thanks!

    Check for the model number of the Wireless Network Adapter of your Toshiba Laptop, If required try to update the wireless network adapter drivers and then check if you face the same problem or not.
    On your Toshiba Laptop, under the wireless network adapter properties, Uncheck "QoS Packet Scheduler" "TCP/IPv6" and then try to connect to your wireless network again and then check .

  • Router model wrt 160n v2 help!

    i have a router wrt 160n v2 and i need a good amount of help ive tryed calling linksys support and they tell me the same thing everytime and its not the problem, i have a modem that uses a USB and before its worked just fine then about 3 weeks ago its just went out. So i went to go buy (the model above) to replace it and when i hooked it up it shows it connected in port on the little sign that looks like waves are being sent out is lighting up and the power is lighting up. but the one that looks like saturn WILL NOT LIGHT UP! best buy told me i need to have the thing configured and im thinking thats it but linksys is telling me i need to call my internet porvideder and get a new modem which is not the case so i think its just need to be configured can anyone help?

    I think in this case you need to reset your router and reconfigure the settings on it. First Connect the Modem to Linksys router on Internet Port and your computer to Linksys router on Port No.1. Once the Physical Connection is done, Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    Click Here to Configure your router with Cable ISP. 
    Click Here to Configure your router with DSL ISP. 

  • I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

    I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

    The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
    The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
    Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
    WDS network
    If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
    The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
    At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

  • Add another computer to a WRT 160N

    On Thursday I bought a new WRT 160N. I followed the instructions and I can connect my wife's laptop to the new wireless network with no problem. Managing the network, connecting to the internet wirelessly, etc. with my wife's computer is a snap. Trying to connect my 6-year-old laptop to wireless internet through the new router is another story. My laptop can see the wireless network. But when I try to connect, enter in the WEP given in the EasyLink Advisor, and wait for the internet to work, my computer pings the network but nothing happens. Adding to my frustration is this: my network (which I run through my wife's laptop) can see my old laptop. When I follow the prompts to add my laptop to my wireless network, it asks if I the computer has a removable media device. I click yes, follow the directions (insert the USB device into the old computer--which it has no trouble reading), and the network says that no USB device could be detected. When I try to outsmart the EasyLink advisor and say that my old computer does not have a USB media device and go through the prompts the EasyLink Advisor eventually brings up a window with my network's security settings that I should use to connect my old laptop to the network. The only problem is that the computer only displays the top 1/3 of the relevant letters and numbers (we don't have a printer yet). Even if I could read or print the relevant information, I wouldn't know where to enter it on my old laptop.
    All I want to do is connect my old laptop to the internet without entering in a long string of letters and numbers or relying on my wife's computer. I also want to make sure that connecting the old laptop does not leave my network open to intruders.

    I have the same issues!  My laptop is only 2 years old however.  This is what I did to fix the issues.  FIRST: GET RID OF THE LINKSYS SOFTWARE off ur old computer!  Let the laptop find the router and connect with its default software.  SECOND: go to ur router setup(the website that is the router IP) under the "Wireless" tab set the "Network Mode" to Wireless-G only" as ur old computer probably cant use the N.  When I had it on "Mixed" which means it should use all the types it had MANY issues with the old computer....  I hope these things help you!
    message me if you need help, I am pulling my hair out trying to fix MY issues... as in the lack of connectivity in an 850 sq ft apt... Ultra Range eh???

  • WRT 160n v2 as a wireless repeater

    I have a E4200 as my main router and would like to use my old WRT 160n v2 as a wireless repeater upstairs. I am getting the impression that I can't do that with v2...Is there any way I can make this work?

    If the User Manual or the routers UI doesn't mention or display any Repeater funtions, then it would not be supported. The next best option would be to wired LAN to LAN AP mode and set it up as a additional wireless AP:
    http://www.northshore-it.com/tips/how-tos/cascade_linksys/#LAN_to_LAN
    Or Cascade the router as BigDave mentioned.
    jgarymc wrote:
    I have a E4200 as my main router and would like to use my old WRT 160n v2 as a wireless repeater upstairs. I am getting the impression that I can't do that with v2...Is there any way I can make this work?

  • Print spooler not working since installing LinkSys WRT 160N

    Since installing my WRT160N my printers have stopped working. All printer drivers have been removed including acrobat and my fax.
    Even if I try reinstalling my drivers, I get the following error:
    Spooler SubSystem App has encountered a problem and needs to close. 
    Prior to this error my firewall was giving me constant warnings about  Pure Networks Admin assistant application trying to access the same files(i.e. nmctxth.exe). Even though I allowed it still kept popping up.
    I am using the online armor firewall on a Windows XP system.
    I cannot access the LinkSys Advisor anymore as it will not start.
    Thanks

    I had the exact same thing happen to me.  Installed a WRT 160N on May 10 and have not been able to print since.  Wasn't sure it was the router until I dug into the event log.  This message appears as a warning during the time I was installing:
    Printer Driver Microsoft XPS Document Writer for Windows NT x86 Version-3 was added or updated. Files:- mxdwdrv.dll, unidrvui.dll, mxdwdui.gpd, unidrv.hlp, mxdwdui.dll, mxdwdui.ini, stddtype.gdl, stdnames.gpd, stdschem.gdl, stdschmx.gdl, unidrv.dll, unires.dll, XpsSvcs.dll.
    Apparently we tried to print something a couple of days later and this error appears:
    DCOM got error "The service did not respond to the start or control request in a timely fashion. " attempting to start the service lxcf_device with arguments "" in order to run the server:
    {323CE21C-A448-40AA-BA74-7FCF1E44106F}
    Any help out there?  Windows says I have a spooler dll file missing and also keep getting an error message about "RPC server not available."   What should I do?
    thanks!

  • How to change the passphrase on my WRT 160N V3

    A few months ago, I purchase, installed and configured a WRT 160N V3.
    And I couldn't be happier.
    I now would like to go back and change the passphrase that a user needs to enter when they connecting to my router.
    Currently it uses the default value.
    And I would like to make it a bit more friendly.
    I found a number of postings dealing with setting retrieving or changing the Admin password.
    But I was not able to find anything on changing the “passphrase”.
    There probably are a number of postings on the subject, and I simply overlooked them. 
    I wonder if someone might be able to point me in the right direction.
    Thanks
    Ray in Wisconsin

    Welcome to the Cisco Home Community.
    Type 192.168.1.1 on your routers address bar and log in. Default is to leave username blank and type admin in the password field.
    Go to Wireless then Wireless Security. You should see your passphrase there.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • Error when trying to sign into Linksys WRT 120N router management page, indicates browser authentication not capable - a HTTP401 error.

    In trying to get into the Linksys WRT-120N router's management utility browser, I was unable to sign in. After resetting the router multiple times and exhausted all the variants of the username/password combination that I can find and think of, I was still unable to sign in to the utility browser. Just for the sake of trying something different, I opened IE 8 browser and was able to sign in just fine. This tells me that FF has a problem with authentication, somewhere along the request information aren't being sent correctly to allow signing in to the utility page of the router.

    hi , here is a step by step for for you need to do..
    a:- Do not use the setup disc....remove it and keep is somewhere safe.
    b:- Disconnect the USB cable from the modem and PC and keep it somewhere safe as well
    c:-turn off the modem and PC....
    d:- with the power plugged in....reset the linksys router for 1 minute...once done , unplug the power.
    e:- connect the modem to the "internet" port of the router and connect the PC to one of the other ports..
    f:- turn on the modem only.....wait for 1 minute for the modem to initialize
    g:- turn on the router and PC.
    h:- on the PC...hit "start">>"run">>cmd and enter ....now the black window should stay up......type ipconfig and enter.....the IP u get should be 192.1638.1.100....if so...
    i:- bring up your web browser and key in http://192.168.1.1 and hit go.....type the password as "admin" when prompted...
    j:- under the setup page....look for an find MAC address clone.....enable and "clone"......save settings and check if you are going online.

  • Hooking up a Westell E90-610015​-06 and a Linksys WRT 160N?

    Please help me.  I have spent hours trying to get my Linsys WRT 160N wireless router to work with my Westell 6100 modem (E90-610015-06).  I have tried the suggestions from dslreports, so please do not send me a link to this website.  Setting the modem to bridge and setting the wireless router to PPPoE does not work.  Also, changing the IP address on the router does not work.  Does anyone have any other ideas?

    changing the IP Address does work.
    You might be doing something differently.
    Let me tell you a few things to check
    You have to open your NIC properties
    make sure its set like this
    Then plug your PC into your linksys, or make sure you connect to it wirelessly. 
    put in 192.168.1.1
    http://ui.linksys.com/files/WRT54G/v1-v4/4.20.7/
    Change the  Local IP Address on the first page to reflect 192.168.0.1.
    Then plug your linksys into the westell.
    reboot the linksys, then reboot the pc (or you can do a repair, or an ipconfig/release and ipconfig/renew in DOS) and as long as the westell is online, everything else will pass internet traffic through
    I hook those up all the time the same way and they work just fine.  
    if it doesn't work again this time let us know, and KEEP IN MIND this is how it should ultimately look
    Wall -> westell -> linksys plugged into the yellow ethernet port, and plugged into where it says WAN on the linksys
    then your PC wirelessly connects to the linksys.

  • WRT 160N Games loosing network connections

    When I am playing MW2 and Socom Confrontation (on PS3) or any game I get a message, and go to the main screen saying No internet connection deteced you must have a active network connection to play this game.  I not only get this from online gameplay, but even if I leave myself signed in I lose the internet and the same message occurs.  I checked with my laptop EasyLink Adviser map and the whole network goes down.  It's not the PS3 because I had it serveced for a diffrent issue with video, but this is ridiculous.  I paid 75 dollars for this router and im pretty mad with Linksys because the same thing happened with my G Linksys router.  ....More Info  My network provider is BrightHouse but this also happenes with Knology.  The WRT 160N v.3 is wireless what's wrong? Someone please help ME!!!  I'm going to throw the router through a window then pick it up and go to another WINDOW!!

    When the internet goes down on your PS3, at that moment you can check if you are still able to go online from your Laptop or not?
    On your Router setup page change the MTU size to 1365 and click on save Settings and then click on the Wireless tab and below change the Wireless Channel to 11 and then click on the "Advance Wireless Settings" and below Change the Beacon Interval to 50 ...Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 ...Click on "Save Settings"...

  • How to eliminate inserting  Duplicate rows into database using JDBC Adapter

    File->Xi->JDBC
    In above Scenario if the file has two rows their values are identical, then how can we eliminated inserting  Duplicate rows into database using JDBC Adapter

    Database is a consumer of a SERVICE (SOA!!!!!!).
    Database plays a business system role here!!!!
    Mapping is part of an ESB service
    Adaptor is a technology adapted to ESB framework to support specific protocol.
    ESB accomplish ESB duties such as transformation, translation, routing. Routing use a protocol accepted by the consumer. In a JDBC consumer it is JDBC protocol and hence it a JDBC adaptor.
    There is clear separation on responsibilities among business system and ESB. ESB do not participate in business decision or try to get into business system data layer.
    So who ever are asking people to check duplicate check as part of mapping (an ESB service) may not understand integration practice.
    Please use an adaptor module which will execute the duplicate check with business system in a plug and play approach and separate that from ESB service so that people can build integration using AGILE approach.
    Thanks

Maybe you are looking for