WRT 300N V1 Question/Problem

During a recent power outage(Router is plugged into a Battery Backup) the connection failed. I reset the modem and the router and it worked on my wired computer. I'm having trouble with the wireless part of it coming back on. I've reset(unplugged it for a minute) a few times and it still doesn't give off a wireless signal.
Laptop, Nintendo Wii and Wireless Printer all having the same problem as their is no network available.
Any tips/suggestions?

As you are able to go online from your Hardwired computer, To make your wireless computers go on Wirelessly you need to change the wireless settings on your Router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

WRT 300N v1.1 problem

I am usunig my router as DHCP, I am acesing internet on 2 laptops at home. WHen the router operates on MIxed standart I have the connectcion on 1st laptop 270MBs/sec on other 54MBs (it has G standart adapter) but the speed of download from the web is about 200KBs/sec no firevall or other filtesr used, when I switch to B&G mode both laptops connect on 54MBits and download speed about 2MBytes from the same place the same file, but when I plug in Ethernet download speed increases to 4.5MBytes. The connection quality is 4 out of 5
what shoud I do?
thanks

Keep the Network Mode as "Mixed"...Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Under the Advance Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...Under the Security tab,Uncheck Capture(firewall.blockinterreq)Filter Anonymous Internet Requests.... Now see if you can locate your Wireless Network and attempt to connect...

Problems w/ WRT 300N

Hello, I have been experiencing decreased connection strength through my WPC300N wireless notebook adapter using a WRT 300N wireless router. At boot-up, the signal strength will be low, with 100+Mbps as the speed. After a few minutes it drops to 54 Mbps, then 13 or 11 Mbps, then finally 2 and 1 Mbps, signal strength very low. The internet is as slow as molasses at this point. I am using windows XP with all service packs. I live in a two story house, with the router on the second floor. However, our old Wireless G router (can't remember the model, it didn't have any speed or range boost though) would get to the laptop where its at now. I thought a WRT300N would be better, but I am having this problem now. My laptop with a Wireless G card holds up at 54 Mpbs all the time. Any ideas or suggestions? Thanks a bunch in advance.

No, the changes did not make a difference. Sorry for the long delay in response. The signal is still dropping off very badly. I am still having no problems connecting the WRT 300N off my really old laptop that is using an old Linksys Wireless G card. In fact, the other day I was downloading two programs at 100Kbps EACH!
BUT, the laptop using the Wireless N card is still slowing to a snails pace within 10 minutes of connecting to the Router. I dont know what else to do, I am thinking of trying different locations for the router to see if I can get a more stable connection. The 14 day return period has long since passed, so I have to find a way to make this work. But as of now, I am still having problems.

Problem with Wireless settings in WRT 300N (V2)

Greetings,
I've just managed to reset the WRT 300N to default settings and have setup the internet conncection etc and home network ... BUT no matter how I've fiddled with the wireless settings I cannot get any of the laptops or mobile phones to connect wirelessly to the network.
The Windows software on the laptops 'finds' the router OK but for some reason the router seems unwilling to supply an IP address.
I've checked ALL of the settings that I can think of, and all are correct ... well, all are exactly the same as my old router which worked perfectly.
It's something that I think muxt be to do with the security settings.
Can anyone offer any suggestions ??
THanks
Solved!
Go to Solution.

Try the following steps:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page.
# Then Click on wireless Tab select, Wireless Network mode “Mixed”, Radio Band to 20 MHz only and Standard Channel to 1, 3, 6, 9, and 11. Click Save Settings.
#Adjust the following advanced wireless settings:
~~ Lower the beacon interval from 100 to 75
~~ Lower the fragmentation threshold from 2346 to 2306
~~ Lower the RTS threshold from 2347 to 2307
Then check the status..
Here is the link for connecting the wireless network: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32036bdcd9dd44ec94f94fc5f6da666f_Connecting_wirele...

WRT 300N - WRT 600N

After all I received 4 linksys wireless router n series.
2 WRT 300n
2 WRT 600n
I decide to test those routers in LAB and then migrate our buisiness medium platform from G to N.
Lets See what happened.
1- In open office env with 200 square meter I have weak signal at corner that reduce my bandwidth to 54 Mb/s(from 270 Mb/s).I test coverage area against WRT 54g and I get Incredible result.there is no more coverage except that you forget bandwidth because it Reduce it to 11 Mb/s.
2- I used Solarwinds Orion to get Throughput from this router and again I find a new incredible thing my dashboard show 150 Mb/s at 2 meters distance between my computer and router.
3- I decide to use site survey to plot a map of coverage area incredibly in close building area i see a circle with 10 meter in blue witch means I can use 270 Mb/s at this range only.
4- After All I tried to bridge two routers together I impact with a phenomena these routers series cant bridge together and there is no sign of option access point or bridge in web base console.But I read in Linksys catalog that this models are enhanced Access Points.
5- After all problems with signaling,bandwidth,Bridging ...
I can only say that linksys produce a product with many weakness in hardware and software.

There is always a reality check between what marketing materials claim (a perfect test in their lab) and a real-world test. Having been on the vendor side for many years, I have seen this situation many of times.
Hopefully the speeds will be good enough for your deployment situation. What caught my eye was your mention of Solarwinds. I have been a long time user of Orion and the Engineering Toolset. Recently I came across PacketTrap Networks (www.packettrap.com) for scanning and diagnostic tools. They also have a monitoring dashboard that I have been using for my critical devices. It was the easiest dashboard to set up that I have experienced. To top it off, they have a free version - gotta love that price. www.packettrap.com/download. Good luck, I feel your pain.
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 02-25-2008 10:49 AM

Hi team , I have some questions/Problem for my product apple (iPad,iPhone) , I want to employee speak and type thai language

Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can speak or response me in thai language
1. ผม อาคเนย์ พำนักอยู่ประเทศไทย กรุงเทพฯ มีปัญหาสอบถาม ดังต่อไปนี้
- กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
- ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
ขอบคุณครับ
อาคเนย์ อุดปิน
กด
<Edited By Host>

Google translation:
พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
http://www.apple.com/emea/support/itunes/contact.html

Question / problems with the Toshiba TV 40TL938 (40TL938F)

Hi everybody,
I bought the Toshiba TV 40TL938 french version ( 40TL938F ), in an online store.
I have a few question / problem, and i hope you could help me.
- when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
- when i play MKV vido files via DLNA (with XBMC), there is no subtitles anymore. Whose fault is it ? my TV ? XBMC ? do you how i can fix this ?
- does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938
Thank you very much by advance for your help !
Backslash
French user of a beautiful Full HD 3D 40 inches toshiba LED TV :)

> {quote:title=TomDexter wrote:}{quote}
> > when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
>
> User manual page 76:
> http://www.toshiba-om.net/LCD/PDF/English/TL938-4046-English.pdf
> You will need to check the option: +Subtitle Type+
Hi !
Thank you for your answer,
I saw this but there is no way to change the subtitle setting.
In "subtitle type" the only thing i can do is to swich from "normal" to "deaf and hearing impaired" ("sourd et malentendant" in french).
So i guess i will have to get used to it
Anyway, thank you for your help !
> {quote:title=donhe7 wrote:}{quote}
> BACKSLASH ASKS " does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938?"
>
> Please excuse my ignorance, but what is "DTS"???
>
> donhe7
DTS is an audio format, such as AC3 or mp4. This TV doesn't support DTS, so when i play movie (such as MKV file) with audio in DTS, there is no sound (but the video is ok).

I want to reset WRT 300N router

My WRT 300N will no let me access to change the password. I want to Press the reset Button. How will i set up access to it again and put a password that I can remember into it.

Not much of anything . Here is what I did. I held reset for about 45 seconds and nothing happened. I did find out the router IP address it is 192.168.1.47 when I type that in it ask me for the log in and password. I try admin admin then nothing and admin and admin and nothing but it does not work. I am stuck again. I did yesterday get to CISCO/linksys help and after a while they said that it was out o warranty in Jan of this year....

Wrt 300n wireless router

How can I connect an external antenna to my wrt 300N?

They should just unscrew ... but the middle on (the square one) is the external and the other 2 are the detachable. I wouldn't mess with that though.

Linksys WRT 300n Problem

Perhaps you can help me.
When I connect the router to my modem and computer I use the cdrom and do the setup.
After a few seconds I see that the wizard tryed to find the router. I get then the message unable to find the router. Check your cabel.
The cabels are good and sitting on the good place.
After resetting the router I tryed again but now result.
Hope you can gif me some info. My router is a linksys wrt 300 N
Thanks for your help,
André

How are devices connected? What is the IP address/subnet mask, gateway of your computer?

WRT 300N signal problems.

Hi i have just installed a WRT300N wireless router into my house.
My Laptop is working fine, 100% signal from the router and all is well.
However, the PC in the garage (literally 10 meters away) is showing little to no signal.
I have used the WMP300N PCI router card inside the PC, in an attempt to make the signal better.
The program that came with the PCI card is showing 70-90% signal strength, but still the internet is choppy to say the least.
Disconnecting and reconnection at random.
Any idea where my problem can be??
I have been assured that this router is more than enough for getting the signal over the space between the router and the PC.
Please any help.
Thanks in advance.

First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, Bluetooth (including Bluetooth game controllers), microwave ovens, wireless mice and keyboards, and your neighbor's wireless network. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Hope this helps.

Noob Question: Problem with Persistence in First Entity Bean

Hey folks,
I have started with EJB3 just recently. After reading several books on the topic I finally started programming myself. I wanted to develop a little application for getting a feeling of the technology. So what I did is to create a AppClient, which calls a Stateless Session Bean. This Stateless Bean then adds an Entity to the Database. For doing this I use Netbeans 6.5 and the integrated glassfish. The problem I am facing is, that the mapping somehow doesnt work, but I have no clue why it doesn't work. I just get an EJBException.
I would be very thankfull if you guys could help me out of this. And don't forget this is my first ejb project - i might need a very detailed answer ... I know - noobs can be a real ....
So here is the code of the application. I have a few methods to do some extra work there, you can ignore them, there are of no use at the moment. All that is really implemented is testConnection() and testAddCompany(). The testconnection() Methode works pretty fine, but when it comes to the testAddCompany I get into problems.
Edit:As I found out just now, there is the possibility of Netbeans to add a Facade pattern to an Entity bean. If I use this, everythings fine and it works out to be perfect, however I am still curious, why the approach without the given classes by netbeans it doesn't work.
public class Main {
    private EntryRemote entryPoint = null;
    public static void main(String[] args) throws NamingException {
        Main main = new Main();
        main.runApplication();
    private void runApplication()throws NamingException{
        this.getContext();
        this.testConnection();
        this.testAddCompany();
        this.testAddShipmentAddress(1);
        this.testAddBillingAddress(1);
        this.testAddEmployee(1);
        this.addBankAccount(1);
    private void getContext() throws NamingException{
        InitialContext ctx = new InitialContext();
        this.entryPoint = (EntryRemote) ctx.lookup("Entry#ejb.EntryRemote");
    private void testConnection()
        System.err.println("Can Bean Entry be reached: " + entryPoint.isAlive());
    private void testAddCompany(){
        Company company = new Company();
        company.setName("JavaFreaks");
        entryPoint.addCompany(company);
        System.err.println("JavaFreaks has been placed in the db");
    }Here is the Stateless Session Bean. I added the PersistenceContext, and its also mapped in the persistence.xml file, however here the trouble starts.
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
@Stateless(mappedName="Entry")
public class EntryBean implements EntryRemote {
    @PersistenceContext(unitName="PersistenceUnit") private EntityManager manager;
    public boolean isAlive() {
        return true;
    public boolean addCompany(Company company) {
        manager.persist(company);
        return true;
    public boolean addShipmentAddress(long companyId) {
        return false;
    public boolean addBillingAddress(long companyId) {
        return false;
    public boolean addEmployee(long companyId) {
        return false;
    public boolean addBankAccount(long companyId) {
        return false;
}That you guys and gals will have a complete overview of whats really going on, here is the Entity as well.
package ejb;
import java.io.Serializable;
import javax.persistence.*;
@Entity
@Table(name="COMPANY")
public class Company implements Serializable {
    private static final long serialVersionUID = 1L;
    @Id
    @GeneratedValue(strategy = GenerationType.AUTO)
    private Long id;
    @Column(name="COMPANY_NAME")
    private String name;
    public Long getId() {
        return id;
    public void setId(Long id) {
        this.id = id;
   public String getName() {
        return name;
    public void setName(String name) {
        this.name = name;
        System.err.println("SUCCESS: CompanyName SET");
    @Override
    public int hashCode() {
        int hash = 0;
        hash += (id != null ? id.hashCode() : 0);
        return hash;
    @Override
    public boolean equals(Object object) {
        // TODO: Warning - this method won't work in the case the id fields are not set
        if (!(object instanceof Company)) {
            return false;
        Company other = (Company) object;
        if ((this.id == null && other.id != null) || (this.id != null && !this.id.equals(other.id))) {
            return false;
        return true;
    @Override
    public String toString() {
        return "ejb.Company[id=" + id + "]";
}And the persistence.xml file
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="PersistenceUnit" transaction-type="JTA">
    <provider>oracle.toplink.essentials.PersistenceProvider</provider>
    <jta-data-source>jdbc/sample</jta-data-source>
    <exclude-unlisted-classes>false</exclude-unlisted-classes>
    <properties>
      <property name="toplink.ddl-generation" value="create-tables"/>
    </properties>
</persistence-unit>
</persistence>And this is the error message
08.06.2009 10:30:46 com.sun.enterprise.appclient.MainWithModuleSupport <init>
WARNUNG: ACC003: Ausnahmefehler bei Anwendung.
javax.ejb.EJBException: nested exception is: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
        java.rmi.RemoteException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.; nested exception is:
        javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
        java.rmi.RemoteException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.; nested exception is:
        javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.
        at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:243)
        at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:205)
        at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:152)
        at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(BCELStubBase.java:225)
        at ejb.__EntryRemote_Remote_DynamicStub.addCompany(ejb/__EntryRemote_Remote_DynamicStub.java)I spend half the night figuring out whats wrong, however I couldnt find any solution.
If you have any idea pls let me know
Best regards and happy coding
Taggert
Edited by: Taggert_77 on Jun 8, 2009 2:27 PM

Well I don't understand this. If Netbeans created a Stateless Session Bean as a facade then it works -and it is implemented as a CMP, not as a BMP as you suggested.
I defenitely will try you suggestion, just for curiosity and to learn the technology, however I dont have see why BMP will work and CMP won't.
I also don't see why a stateless bean can not be a CMP. As far as I read it should not matter. Also on the link you sent me, I can't see anything related to that.
Maybe you can help me answering these questions.
I hope the above lines don't sound harsh. I really appreciate your input.
Best regards
Taggert

Question/Problem Sharing iTunes Library between multiple users

Hello all,
I have a question (potential problem) regarding sharing an iTunes Library between multiple users.
In the past, I had placed the iTunes folder in /Users/Shared, and created an alias to it in the "Music" folder of each user, and it worked fine. However, with a recent upgrade to Mac OS 10.5, only the Home user account can access the library.
I read the Apple Support Document http://support.apple.com/kb/ht1203 uner Mac OS X which specifically states *not* to move the iTunes folder, just the iTunes Media folder (which I don't have, would that be iTunes Music?).
Any recommendations? Should I delete the different alias, move the iTunes folder back to the home user, and then follow the instructions in the support document?
We're also looking to sync music purchsed on our iPod touches, as well as apps (which weren't supported in our privous Mac OS X version.
Any advice is appreiciated.

David Guay wrote:
... iTunes Media folder (which I don't have, would that be iTunes Music?).
yes.
specifically states *not* to move the iTunes folder
*do* keep the entire iTunes folder in /users/shared, however, instead of creating aliases, launch iTunes while holding the option (⌥) key, click choose library when prompted, and select the iTunes folder in /users/shared.
obviously, only one iTunes at a time can access the library !

Some reason my apps cannot download in my mac security question problem

securty questionn of apple id problem i tried my apple id method also but did`t work

I strongly recommend that you use a password for each login account but primarily for your admin account which will also be required when installing any software that uses an installer and/or for something being installed to the root directory of the hard drive such as a virus would likely require. If you are ever prompted for your admin password out of the blue to install anything without purposely trying to install anything, you should always decline which not having an admin password negates.
Many single users of a Mac have an admin account (obviously and required) but create a login account without admin privileges for every day use as added security.
Besides turning on the built-in Firewall, do not enable any services/ports that you don't need or regularly use and select all options via the Advanced button under the Firewall tab.

Startup disk question/problem

Should the startup disk always be at the top of the list of disks upon startup? Or is it now the case, with 10.5 on a MacBook, that the internal disk is at the top of the list whether or not it is the startup disk?
Situation: New MacBook Mac OS 10.5.8, new Western Digital Scorpio Blue WD3200BEVT 320GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive in an external MacAlly SATA FW/USB case. I erased (formated) the external drive, and, using Restore in Disk Utility, made what I expected to be a clone of the MacBook's internal drive.
Problem: After repairing permissions, using Start Up Disk preferences I selected the new drive as the start up drive. Upon restart I get mixed signals as to which is the startup drive. The original (internal) drive is at the top of the list on the right of desktop but, in the Start Up Disk Preferences list, the new drive is highlighted. (Further: I am able, after right clicking on the internal disk, to select it, to eject it.)
Questions: Have I bought a drive that won't work as a start up drive or doesn't Disk Utility Restore in 10.5.8 create a bootable drive as in 10.4 or does the internal disk always show up at the top of the list on the desktop in 10.5.8? When I swap the drives, putting the new drive in the MacBook, will it boot?
This procedure for swapping new drives has always worked with my Macs thru Mac OS 10.4.11.

Check with Western Digital (the FAQs on their website) whether that hard drive is bootable on your Mac. Not all of them are.
Quote from a Western Digital FAQ:
While it may be possible to boot your computer to an external hard drive, Western Digital does not provide technical support for booting your computer using an external hard drive. If you intend to make a copy of your boot drive, or install your operating system, please use a second internal drive (EIDE or Serial ATA), rather than an external drive.
And their list of bootable drives:
The following external hard drives are bootable on Intel-based Macintosh computers systems through USB:
• My Book Essential Edition
• My Book Essential Edition 2.0
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition
• My Book Premium Edition II
• My Book Premium ES Edition
• My Book Pro Edition
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
The following external hard drives are bootable on Intel-based Macintosh computers systems through FireWire (1394a/b):
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition
• My Book Premium Edition II
• My Book Pro Edition
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
The following external hard drives are bootable on Power PC based Macintosh computers systems through FireWire (1394a/b):
• WD My Book Premium Edition
• WD My Book Pro Edition
The following external hard drives are not bootable on Power PC based Macintosh computers systems through USB/FireWire 1394(a/b):
• My Book Essential Edition
• My Book Essential Edition 2.0
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition II
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
• My Passport Elite
• My Passport Essential
• WD Passport
• WD Passport (Silver)
You will find a more up to date list on their website.

WRT 300N V1 Question/Problem

Similar Messages

Maybe you are looking for