WRT 54G conected to access point but not internet

Hi There
The wireless router is working an can get to the internet on PC
My other PC see's the access point but
will not connect to the internet
Signal strengh andLink quality are good, looking at the
PCI Linksys adapter box
any thoughts?
Thanks

Whats the OS installed on your computer. In the system tray you will find the linksys monitor...right click on it and select "Use windiws XP configuration" ... once its done ... next to that you will find "Wireless Network Connection" icon ... Right click on it and select "View Available Wireless Network".... select your network... when prompted for "Network key" type in your security key and click on 'Connect' ... After this see if you are able to go online or not.

Similar Messages

  • LinkSys Wireless Card connects to "Access Point" but no internet connection

    I have 2 LinkSys wireless cards. one is 802.11g, the other b. The signal for the Airport Extreme 802.11n Wi-Fi Wireless Base Station is very strong, but when I try to connect, it says "You are connected to the access point, but the Internet cannot be found". No internet access, and I can't ping anything (Ping request could not find host...). And of course the printer hooked to the AirPort is also not recognized. My iMac and Macbook both have no problems connecting to the network. There is no problem with ethernet connection to the Airport. Is it possible to have a compatibility problem between the Linksys and Airport hardware? I thought as long as they were were compatible 802.11, they would work together. The cards had no problem with my old DLink router or other hotspots in the city. Is there a set-up I missed for setting up the PC-based cards with the AirPort?

    Is your wireless network secured?
    The box said windows xp or better... So I installed Linux!

  • WRT160N Useable as a switch/access point but not as an internet gateway?

    Greetings,
    Can anyone tell me if it is possible to use a
    WRT160N wireless N router as just a switch and wireless LAN access point and NOT as an internet Gateway?  I have a LAN that is not connected to the internet that uses a Linksys switch and I need to get a wireless access point setup so that I can attach a computer wirelessly to this LAN.    Occassionally I connect the swich to another router that does have internet access, but in general the LAN is not connected to the internet router.
    Thanks! 

    You can use WRT160N as a switch...Connect the LAN to the Ethernet port of the router and change the ip address of the linksys router in the range of the LAN ip.

  • E1000 works behind E3500 as access point but not behind Airlink AR675W and ideas?

    In my own home just testing my E1000 works fine as an access point with an E3500 as primary router using Linksys
    method 1 (lan-lan connection) with E1000 IP reset to 192.168.1.2  and  DHCP off  and with
    method 2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
    In my daughters building where I need it, I cannot get the E1000 to work as an access point.  The primary router is an Airlink AR675W with ip 192.168.0.1 (255.255.255.0) delivering addresses 100 to 150.
    When i try the E1000 in either method  I get no internet connection on devices connected hardwired or wirelessly to the E1000.  Before each setup I used the reset button and the factory defaults tab
    method1 (lan-lan) I set the E1000 to IP 192.168.0.2 to be different than the Airlink and DHCP off.
    method2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
    Are there any ideas why I cannot connect to the internet in this way behind the Airlink primary router

    ok - i will read up on the airlink - it is a landlord situation but he will probably let me do a few things to it.
    Also I see the Airlink admin IP default is 192.168.2.1 and not 192.168.0.1 like I thought so that might make a difference.
    I don't know what flash DD-WRT means.  Its a 10 minute drive to the other house. The internet provider is SHAW cable and I do not know the modem but it is probably Motorola SB5100 or SB5102 wired modem.  The problem is it is a large house with concrete walls & floors & double pane windows so the wireless signal downstairs is weak.  ethernet cables are probably ok but I'll take some more with me.  The  ethernet jack downstairs definately works as I can connect a single PC to it.

  • I have an airport express, which I want to use with my broadband providers router to create a second wireless access point but not with the same network name etc.

    In effect, I want to have my providers router working upstairs and the aiport express downstairs connected via wi fi. The airport would have a different network name, then allowing me to connect the children to the access point. This would allow me to turn their network off at times of day etc.
    any ideas ?

    I want to have my providers router working upstairs and the aiport express downstairs connected via wi fi
    Sorry, but the AirPort Express....or any other Apple router......cannot do this.
    In order to do what you want, you will need to establish an Ethernet connection from one of the LAN <-> ports on your "main" router to the WAN "O" port on the AirPort Express.
    Configure the AirPort Express to "create a wireless network" using a wireless network name, and password that you select. As far as controlling connections, you can use the settings in Timed Access to establish rules about when the kids and cannot connect.

  • My iPod Touch 4G connects to access point, but not the internet.

    I'm stuck for ideas, so any help is appreciated! I've gone through the troubleshooting guide, and none of that helped. I've reset my network settings, forgetting the specific network, resetting the router, resetting the iPod, restoring it to factory settings, upgrading to the latest firmware, and nothing has worked.
    Sometimes, if I forget the network and reset my iPod, it may (but not always) work for that session. Whenever I try again, I have to repeat this process and HOPE it works.
    I can't try on another network because that's not available to me and won't be for a while.
    This happened really randomly. Nothing changed, and it's driving me mad. Any help is appreciated a lot!

    Does it connect to the internet with other networks?
    - If so that indicates a problem with your router. Likely time for a new router.
    - If not that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Connect to router but not internet

    I recently got a WRT54G Wireless router and easily configured it to run on my Mac but when I try to set it up for my PC it will ping the router but nothing on the internet. Can anyone help me figure out how to setup the corrrect connection on a Xindows XP. My service provider gave me no password or login name to get on the internet.

    I've got the same problem.  The Linksys Wireless Monitor says that it's connected to the access point, but the internet can not be found.  It sometimes indicates that it's connected to the internet for a moment or two, then loses it.  We have 3 computers and this problem is only happening with one of them.  The computer in question just started having this problem.  It previously worked fine.
    Despite indicating that it's connected to the access point, I can not connect to the router's admin interface.
    I tried safe mode with networking, but still wasn't able to connect.
    Any more ideas?
    Thanks in advance.
    Message Edited by ARDelta on 01-21-200711:37 AM
    Message Edited by ARDelta on 01-21-200711:52 AM

  • WRT 110 as an access point

    I have two WRT 110 and I am using one as a wireless router and I wish to use one as a wireless access point, but cannot get them to connect. I have tried it manually and using the wireless protected setup. Is there anything that needs to be cofigured in the router to use it as an access point only? Any help or advice would be appreciated.

    You can not connect them wirelessly, you must connect via Ethernet cable.
    You may go here to find out how to cascade two routers.

  • I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

    I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
    Narmin

    I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
    In the title you state.
    From my interanet I can access srvr but not from my home.
    Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
    In the first post you state,
    I can access windows server from within interanet but don't know how to access it from internet.
    Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
    But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
    I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
    And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
    1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
    2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
    There are lots of references to port forwarding in the TC.. eg
    http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
    The things that generally go wrong are firewall on the computer that is accepting the port.
    The ISP doesn't allow connections on a particular port. (not likely in your case)
    The router is behind another router.. double NAT will kill any port forward.
    Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
    IP on the receiving device is not static and so changes.
    Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

  • Access point are not coming up after upgrade image of WLC

    Hi,
    I have AIR-WLC4402-50-K9 WLC i that current IOS is 7.0.98.218 and i upgraded with 7.0.116.0 IOS but after upgrading and reboot the WLC from 15 access point 3 access point are not coming up and 12 are coing up and working fine (4 1142 and 11 1131 series access point) 3 which are not coimg is 1131 series access point. when i login with console to 3 access point its rebooting 2 times and coming on ap: prompt.
    In between that i reloaded the WLC one more time because from 15 acess point only 4 aceess point are came up and i also cleck the show boot on wlc its output is
    7.0.116.0 (default)
    7.0.98.218 (active)
    so i reload  the wlc and checked out of 15 acess point now 12 acess point are up and still 3 are not. And i also checked the output of show boot command its
    7.0.116.0 (default)(active)
    7.0.98.218
    So i things its because of when 2nd time i reload the wlc the remaining 3 access point are getting image from wlc but because of reload its connection should be loss and error loading flash error are coming on acess point.
    After that i recover the IOS for access point and convert into autonomus and from autonomus convert into Leightweight Access point. I also attached the procedure for recover the ios of access poing
    But my question is why this 3 access point are not coming up is this happen's after upgrading wlc can any one please send me Step by Step WLC S/W Upgrade' process and if this this happens some time please send me any doccument related to this.

    Sunil,
         When you rebooted the controller did you do it from the Web GUI, the CLI, or did you physically reboot the controller? I believe and maybe incorrect but if your getting the ap:  < prompt > that means that there is no firmware on the unit. If you have restored these to functioning autonomous unit and then re-converted them to Lightweight and it's still happening then we need to look at a debug output of what is happening when those AP's attempt to join the controller.
    The capture you attached shows that it appears to join the controller and get a config, but are you saying that when it reboots again it stops working?? the other thing I would reccomend is clear out the flash memory since your capture shows the possibility that there are several copies stored there.
    Hope this helps.

  • Connected to access point but internet cannot be found????

    router was working fine until it wasnt finding internet one nite and then it was unplugged so internet could be used on main computer and now when i try to plug everything back up to get wireless internet, it still says connected to access point but internet not found dont have a clue what is going on!?!

    I think you were connecting to wireless router to access Internet, you need to have proper configuration on wireless router and wireless adapter to make it work, take a look on this wireless network setup tutorial to help you.

  • Access Points do not show in CDP neighbor

    Hi All,
    Last night I was performing mainteance on access points throughout the network. I was converting them from Local to H-REAP to allow for vlan support. The maintenance went well however afterwards I've noticed access points are not showing up in CDP neighbor and with a "show power inline" the access points shows as a IEEE PD. This is causing some weird issues where a client can connect but then will lose it's DHCP address. The problem happened on 9 of the 12 floors that I did this on and there is no configuration differences and bouncing the access points did not resolve the issue. The access points do show a blue light.
    Has anyone ever experienced this before? If so what did you do to fix it?
    I have a mix of 1131 and 1142N access points on a 4402 WLC running version 6.0.188.0.
    Thank you,
    Chris Pratt

    The maintenance went well however afterwards I've noticed access points are not showing up in CDP neighbor and with a "show power inline" the access points shows as a IEEE PD.
    I see all the time.
    "sh cdp neigh" shows nothing and "sh power inline" shows the port connected to the WAP as "IEEE".  This is mostly caused by faulty cabling.  If you have the right Cisco switch, you can test the cable using the in-built TDR feature.
    Here's how you do it:
    1.  Command:  test cable tdr interface
    2.  Wait for about 5 to 7 seconds;
    3.  Command:  sh cable tdr interface
    4.  Please post the complete output. 

  • I can access Google, but not Gmail.

    Hi guys. I've been having trouble with my internet connection for as long as I've had my Mac (one year). For the longest time, I've repeatedly had to click the icon for Airport and then turn it off and back on again to recover my connection to Google Gmail and Google docs. These are the first sites to disappear, later I have trouble accessing other sites, this is corrected by turing off and then on Airport. But that is very frustrating, and I often have to do it over and over again. Also, I'm puzzled by the fact that my Skype connection is rarely bothered when access to others sites drops.
    I've been reading as much as I can find and trying the airport utility. Clearly I am stupid because things went from bad to worse. Now I can access Google, but not Gmail. I can access most parts of Apple.com, but when I tried to purchase the upgrade to OS 10.6, I couldn't view the page images. I found the same problem on a few other sites. When I tried to access Linkedin, I could get to the login page, but no further.
    In each case, I get the usual message: Safari can’t open the page “https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false& continue=http%3A%2F%2Fmail.google.com%2Fmail%2F%3Fhl%3Den%26tab%3Dwm%26ui%3Dhtml %26zy%3Dl&bsv=1eic6yu9oa4y3&scc=1&ltmpl=default&ltmplcache=2&hl=en” because Safari can’t establish a secure connection to the server “www.google.com”.
    I've tried resetting Airport back to the factory settings. Now all I get is the blinking yellow light - I'm not sure what that means.
    I'm now connected via hardwire, but access is limited to very few sites, such as this one and Google. I can search google, but I can't access gmail. I can access everything on my windows computer through the same wired network.
    Message was edited by: WhidbeyTomas

    I am having this same problem, but it's not related to parental controls. I have to keep turning the airport on and off as well. Here (http://www.mac-help.com/forums/showthread.php?t=9802) is a post I made over at mac-help.. still waiting for a reply.
    What I've noticed is, the DNS is resolving correctly, but I cannot access certain sites. Regardless, I've tried Open DNS servers and still get the same result. It's not a specific browser. Certain sites go down in a few minutes after visiting them. Some go down faster than others. And others don't go down at all. Sites I've had problems with are Apple.com (to make this post I've had to turn the airport on and off continually), Gmail.com, Google.com, while Google.ca works fine.
    A solution would be great..

  • How to use time capsule for wireless back-up but not internet?

    Hello,
    I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
    I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their  network.
    Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
    Thank you for your help.

    Your original question was How to use Time Capsule for wireless back-up but not Internet?
    There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
    If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
    Yes, it appears to work without plugging into my tower.
    Correct, it will work.
    I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
    As I stated, that is the downside to trying to back up without an Internet connection.  You have to establish another network...and backup over that network.
    If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

  • HT1595 apple tv will connect to network but not internet

    apple tv will connect to network but not internet

    I have unplugged the apple TV but it still says noat connected. However, it has accessed some movies but when I try to purchase or download from say netflix, it cannot.

Maybe you are looking for