Wrt100 and apple macbook connection problem

We have a WRT100 and having problems getting the mac to stay connected.
No problems with a Dell laptop. 2 Sony PS3s, Tivo HD, but after a few minutes
online the mac just loses connectivity. Any suggestions?

I was having the same problem. This is what I did to solve the problem. Went into the Basic Wireless Settings and: 1. changed Network mode to G only. 2. Which disabled radio band and wide channel options 3. Set Standard Channel to 11 instead of Auto. Not sure which one of these fixed the problem but my powerbook stays connected now.

Similar Messages

WAP551 and Apple Macbooks - connections drop every 10 minutes.

WAP551 and Apple Macbooks - connections drop every 10 minutes. The Apple Macbooks are from 2007 till 2013. WAR551 are up to date and in cluster mode (3 WAPs).Here is a LOG from an Apple Terminal:
>> associated to "YETU". Bailing on auto-join.
>> Thu Apr 10 13:34:44.536 <airportd[26500]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Thu Apr 10 13:34:44.588 <airportd[26500]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Thu Apr 10 13:34:44.665 <airportd[26500]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Thu Apr 10 14:20:54.383 <airportd[33885]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Thu Apr 10 16:53:21.174 <airportd[53703]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Thu Apr 10 16:53:21.227 <airportd[53703]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Thu Apr 10 18:23:20.964 <airportd[69818]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Thu Apr 10 18:23:20.981 <airportd[69818]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 10:06:43.91 <airportd[72219]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 10:06:43.139 <airportd[72219]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 10:06:43.178 <airportd[72219]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 10:06:58.28 <airportd[72219]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 12:13:02.157 <airportd[91270]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 12:13:02.200 <airportd[91270]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 12:13:02.256 <airportd[91270]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 12:13:02.369 <airportd[91270]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 12:42:59.251 <airportd[94105]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 12:42:59.305 <airportd[94105]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 12:42:59.412 <airportd[94105]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 13:04:10.168 <airportd[95448]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 13:04:10.296 <airportd[95448]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 13:04:10.336 <airportd[95448]> _doAutoJoin: Already
>> associated to "YETU". Bailing on auto-join.
>> Fri Apr 11 15:02:21.138 <airportd[95448]> _doAutoJoin: Already

Did you try upgrading them to the latest (1 week ago released) firmware update 1.1.0.4?

Apple tv connection problems connection manager :: invoke:: failed to find service

HELP THIS IS WHAT I GET WHEN TRYINF TO LOG INTO APPLE TV:
apple tv connection problems connection manager :: invoke:: failed to find service

Check over on the right side of the thread here under More Like This. Look for one that has a green checkmark which means it is answered. I have read of this however, I do not know how to solve it. It seems as though it is one particular carrier this happens to.

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

FRANK M
What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
For the 9.0.1 Update
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
Camera Raw (last update possible for 9) is 6.5
Camera Raw-compatible Adobe applications
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
Please review and consider the above, and then let us know the outcome.
Thank you.
ATR

Apple TV wifi connection to BT home hub 2 and Apple MacBook

Software update available when I switch on Apple TV tonight so I updated, TV restarted automatically and is only erratically connecting to router and when it does asks for network password. I am quite new to Apple Mac but found my router details and put in the only password I have - an administrator password but that is not the one!! I switched router off and on again - no result - looked at BT broadband help - no help. Any ideas welcome please to a very new Apple Macbook user.

there are 3 passwords you can be asked for
wifi encryption password this is the password that make sure only people who you wish to can use your internet with your wifi this is set by you
appleID password this is to buy stuff using your apple account
shared itune lib password if you have a computer and share it's conetent then you can set a password (this is don in itunes on the computer)

Macbook connection problem WRT54GS v6.0

I have a problem on my macbook running OS X 10.4.8
My airport connects to the router but does not receive a valid Ip address. I can even access admin screen from the macbook, but I cannot get on to the internet.
I am running a WRT54GS v6.0 router
I have turned on MAC address filter on my router on purpose. I have my macbook's MAC address stored as an "Allowed client" on my router
also, I have ristricted the maximum number of DHCP leases to 4 clients [ i have 2 pc's and a macbook]
I am using wpa personal security setting. I tried both TKIP and AES modes. neither worked [currently using TKIP]
Although the Airport shows that It is connected to "myNetwork", it does not have an IP address assigned
please help me

the macbook used to
I changed some settings [which I forget now] in order to join the windows workgroup. It did not work.
I did a clean reinstall of Mac OS X today
I did not import anything from the previous install. So all network properties must have been deleted.
So i was expecting that starting all new would work. but it hasn't yet.

Strange Macbook connectivity problem

I have the latest Macbook with 802.11 a,b,g and N installed and enabled.
I also have an Apple AirPort Extreme (802.11n) with an Apple TV connected to it.
Strange thing is that when I enable 802.11n only (5GHZ) on the wireless router,only the Apple TV will connect.
Nothing I do to the Macbook will allow it to connect at 802.11n. If I reconfigure the Airport to 802.11 g ,a and n the Macbook will then see the wireless network,and connect.
This defeates the object,as I wanted to seperate the Apple TV and the Macbook from the rest of my 802.11g devises.
The Airport is connected via a wired connection to a router.
It opperates in Bridge mode.
Can anyone help.
Cheers
Eli

If you have the newest MacBook then the following link can help: http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=36A 3C0EC&nplm=D4141ZM/A
You need that update to make your MacBook n compatible. But only the newest one will work. Or if you got the AEBS, and installed the CD, then it should have put it on so you don't need to buy that.

Apple TV connection problem + Time Capsule

Hi there, I seriously need your help because I don't know what else I can do.
Here's the situation: if I want to sync a single movie (let's say about 1.3 gig in size) to my Apple TV (connected via wireless to my Time Capsule) from my iMac (also connected via Airport), everything goes wrong. I just click on sync in iTunes, see the progress bar slowly going up and as soon as it reach 40%, it just stops sending the data. I check iStat in dashboard just to realize my computer is neither sending nor receiving any data! I then open Safari and not a single web page will load. I then switch back to iTunes, click on the little X to cancel the sync and after 30 seconds, the Apple TV dissapears from the list and the only way I get back my internet is by going to my Time Capsule, pull the plug and reset it. I then get back my internet but I'm still not able to sync my movie to my Apple TV.
I tried reseting my computer, reseting the Apple TV, repair permission, trash itunes preferences nothing seems to be working. I don't know what else to do.
Thank you for your help!

I wish I had a solutipn for you... I am having a similar problem which started in the last two days with my playstation not finding the network from the TC, although the AT! and everything else in the house can find it just fine. The connection in the AT1 is spotty. I wonder if setting the TC to "internet robustness" will help or hurt? I just tried that and will let you know if it helps. Also, often, the syncing stops and does not complete between our iMac (i7 processor) and our AT1.

IPhone and Apple BT answering problems

Hello,
I have been experiencing problems with the iPhone and the Apple BT headset when answering phone calls. It seems that if a call comes and I try to answer it with the BT unit, a lengthy amount of time goes by until I actually here the phone ringing in the BT. Then the phone shows that the call is active and the ticker starts counting time, but there is no sound. If I pick up the phone and listen to it, there is no sound. When I push the BT button, there is no sound. If I use the phone and select an audio source, again, there is no sound when choosing any of the options, BT, Phone, Speaker. Callers have reported that they hear no sound either. Just a blank line before they hang up. Yes, I know...RESET. And that works...sometimes on the second or third try. Has any one else had this problem or know of a solution? It sounds like a bug...pun intended...

I have the same exact problem, except that for me, that exact things also happens when I am not connected to the bluetooth.
However, I restored my phone and it stopped the problem, but it wasn't until I paired my bluetooth with my car handsfree did the phone started doing the same problem again. Any fixes?

Resolved my Airport/MacBook connection problems

So I changed three settings on my base station and now my connection doesn't drop every couple of minutes:
1) Turned SSID broadcast ON (I did have it off)
2) Changed to allow 802.11 b AND g (it was set to just g)
3) Changed encryption to WPA AND WPA2 (it was set to just WPA2)
So I'm not sure which of these was the real culprit or if it was exactly this combination, but I'm thrilled that my problems are over.

I am 99% certain it is this:
1) Turned SSID broadcast ON (I did have it off)
This is down to chipset incompatibilities between the Airport and the MacBook.

Adobe Acrobat 9 Pro on both my Apple Mac Pro and Apple MacBook Pro

I think I found the answer to my question: "May I install my copy of Adobe Acrobat 9 Pro on both my Apple Mac Pro and on my recently purchased Apple MacBook Pro?" I think my question was answered in reading the text of the agreement for use of this site in the following:
"You may activate the Software on up to 2 devices (or virtual machines) at a time, if these activations are associated with the same Adobe ID for the same individual, unless stated at http://www.adobe.com/go/activation . However, you may not use the Software on these devices simultaneously."
If this is correct, would you confirm. I know how security conscious Adobe is with their software.
Thank you! Be Safe!
Ken

Hi kennethf71183385,
Thank you so much for asking! Yes, you are entitled to activate your copy of Acrobat on two computers. Please see Activation & Deactivation Help - Adobe Support for more information about activating Adobe software!
Please let us know if you have additional questions.
Best,
Sara

9780 and Playbook bluetooth connection problem

I have never experienced bluetooth connecting problems between my 9780 and Playbook 64 previously ... but for last few days I cannot connect them. I have deleted both devices and re-paired successfully. I have turned both fully off (removed 9780 battery) and still no connection.
I have tested both devices by successfully connecting each of them to other bluetooth devices. They just will not connect to each other for some reason.
The only change was the recent Playbook Software update.
I use the Bridge and Tethering all the time and so need Bluetooth to be working ... thanks for any assistance.
Solved!
Go to Solution.

maybe you can uninstall then reinstall the Bridge app on your 9780.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

E65 and Pc Suite Connection Problem

Hi Everyone,
I seem to have a problem with my E65. My goal is to synchronize my calendar in Lotus Notes, with my E65, every 30 minutes when I am around the laptop (via bluetooth).
However, although I am able to connect to my phone via bluetooth from PC Suite (I can see the files in my E65 form my laptop, connect via gprs, etc.), the synchronization doesnt work. It used to work a while back, but then, I remember having similar problems.
In PC suite v.6.85.14.1, when I click on, "Click here to connect a phone" and choose bluetooth connection in the popup box, my phone appears in the list, with a handshake and a lock icon next to it (paired). I select my phone in the list, hit next, and it says "You now have the following connections available: Arda E65". Great! But when I go back to the PC Suite, it still says "Click here to connect a phone". Damn!
Also, there is a PC Sync icon in my taskbar. Click on it, and the Nokia PC Sync comes up. The synchronize now option is faded out, and only View last report and Select Phone is available. When I click on Select Phone, nothing comes up..
Can someone please help me with this problem as I really need that feature. That was one of my reasons for buying the Nokia E65...
Thanks in advance,
Arda..

Hi,
Ever find a fix ? My problem is below (seems very similar). This group has not helped me yet.
/t5/Connectivity/Nokia-6350-bluetooth-connection-to-PC-may-or-may-not-resume/m-p/724267/highlight/tr...
Neel

Macbook pro and Iphone5 bluetooth connection problem

my Iphone 5 will pair with my macbook pro with bluetooth but when i try to connect it says unsupported devicebl

Thanks for your reply.
In the Print and Scan Preference how many printers do you have installed? - one.
If only one which I assume is USB, try installing the Cannon as a network printer. - It doesn't specify that it is connected by USB. It says that it is "in use, Default". There is a tick in the box alongside "Share this printer on the network". Is there somewhere else that I need to access to install it as a network printer?
If you have already installed it as a network printer open the print queue from the Print and Scan. Click on the Printer Menu and run Netwrok Diagnostics.
I entered the print queue but there is no option to click on Network Diagnostics because it is greyed out.
There are tick boxes alongside:
Screen sharing
File sharing
Printer sharing
Scanner sharing
Remote login
Remotemanagement
Remote Apple events
Internet sharing
Bluetooth sharing
with a tick alongside Printer sharing.
Many thanks.

Which imacs and apple displays connect to late 2008 aluminum macbook 13 inch for use as external display?

I have a late 2008 13 inch aluminum macbook and want to purchase an iMac computer or apple display to use as an external display for it while I'm at my desk.
I can afford up to $700 for sure, maybe up to $1000 and would like one that has built in camera and audio if possible.
I'd like to know what my options are as it seems not all are compatible.
I'll mostly be doing web browsing and photo editing in Aperture.
Also wondering if it's possible to sync 2 computers so that when you make changes on one it reflects the changes in the other. Like you can with certain apps like Evernote.
Thank you for your help!
Cybrena

Yes he is right, Snow Leopard is your first step. Once you have that you can upgrade directly to Mountain Lion if memory serves me correct. Some people were saying that Lion was a little sluggish with the aluminum MacBook but that Mountain Lion was great. Personally I had Lion on it also and didn't think it ran badly. 10.6 was still with Rosetta (the program that ran power pc apps) but this is dropped on 10.7 and up. Up until just the other day I still had the stock 2 gb of ram. The firmware update happens with Snow Leopard and up so it should come up as a software update. If not, it can be done manually as well. The ram I purchased was 60 bucks for the 8 gb. For Lion and Mountain Lion I have to agree with the above reply, that it would run alot better with at least 4 gb. If you run that many apps at once then you are going to want as much ram as you can get. If you add a solid state drive you will be amazed at the difference it will make too.

Wrt100 and apple macbook connection problem

Similar Messages

Maybe you are looking for