WRT100 - Cannot conect PSP in firmware 1.0.04

Hi everyone,
I have been using internet in my PSP 2000 since I have bought the router WRT100. After I update the firmware to 1.0.04 it doesn't find my SSID anymore. I noticed that when I turn-off Wi-Fi Protected Setup it shows my SSID but the router config rollback to a previosly config enabling the Wi-Fi Protected Setup.
Can you help me?
Solved!
Go to Solution.

Since you have already Upgraded the firmware of your Router, Have you resetted your Router, If not then you need to Reset your router and re-configure all the settings on your Router back again.
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Here are the wireless settings which you can set on your Router, once you input all this settings, after this your PSP should be able to go online Wirelessly.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

After downloading and installing 3.6.11 latest Firefox version, cannot conect to the web. Found old 3.0 version, re-install, back on the internet. What was wrong?

After downloading and installing 3.6.11 latest Firefox version, cannot conect to the web. Found old 3.0 version, re-install, back on the internet. What was wrong?

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r45
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

I lost 3$ for add visa card, plz help me, it does't work, when i buy gem in heroes charge, it' cannot conect itunes store and ...

Hi, i'm speak english so bad, 13/11 15:20pm, i add visa card ACB prepaid from VietNam, it' done. But when i buy gem from Heores charge( Ucool ), cannot conect itunes store, plz help
<Email Edited by Host>

Hi ..
Pre paid accounts are not accepted at the iTunes Store > iTunes Store: Accepted forms of payment
Iin-App purchases require either a debit or credit card. You may be able to purchase other content but not in app purchases.
What can I buy from the iTunes Store in my country? - Apple Support
Check to see what content you can purchase in your location > What can I buy from the iTunes Store in my country? - Apple Support

When i plug my iphone 4s into the laptop itunes says itunes cannot conect this iphone because an error ocurred,(error 0xE80000222) what can i do also i havent activate my iphone so i cant do anything with the iphone either

when i plug my iphone 4s into the laptop itunes says itunes cannot conect this iphone because an error ocurred,(error 0xE80000222) what can i do also i havent activate my iphone so i cant do anything with the iphone either
HELPPPPPPPP ME PLEASE!!!!!

iTunes runs on your computer, not your phone. Install the latest version of iTunes on your computer. If you're using a Mac, and running OS X 10.5, you will need to upgrade OS X first.

Cannot conect apple tv to my new internet routers

I Have a new internet provider an i cannot conect my router to my apple tv i dont have the oridgnal apple tv remote just my phone

Do you have the Remote app on the phone and is your Apple TV setup to respond to the app? If so you can do the setup of of it.
However if the Apple TV is not on the network then you have no choice but to purchase or find the remote. There is no other way to do the initial setup.

Cannot receive mail - cannot conect to server

Can anyone help me, i cannot receive icloud mail. The message is: cannot conect to server in the inbox of the mail app in my ipad.
Whatis needed to do to fix it. Thanks.

Hi Miguel3903,
Thanks for visiting Apple Support Communities.
See this article for some steps that can help troubleshoot iCloud mail on your iPad:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
Regards,
Jeremy

HT201304 why I cannot conect to the iTunes store with this iPad?

why I cannot conect to the iTunes store with this iPad?
when I want to download something, always show me " cannot connect to the intues store ? What I can do now ?

Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Windows cannot conects .. name

Does anyone know what I should do?
I just bought my Vista machine and new router . I successfuly installed everything my laptop works fine for about 3months everything was fine i was using wi fi but later on my laptop starts to disconect from my internet and later it find the internet but says that windows cannot conect to name i got internet on my laptop by the cable i buy new internet card but its still the same i reinstal my windows and nothing i now got the windows that i have at the begining i got internet from virgin

So when you Hardwired your computer to the Router you are able to access Internet on your Computer... But when you try to connect to your Wireless Network you are getting an error message "Windows Cannot Connect to the Selected Network".. If you are getting this error message then you need to change the Wireless Settings of your Router..
Whats the Model number of your Router? Assuming you have N Series Router, Here are some of the Settings which you need to change it on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Wireless MAC Filter : -
Make sure the Wireless MAC filter on your Router is Disable.
Now see if you can locate your Wireless Network and attempt to connect....

Cannot Restore my Ipad Firmware.Firmware restore not compatible

Cannot Restore my Ipad Firmware.Firmware restore not compatible
but i download lasted firmware for my ipad,4.3.5 and 4.3.4 also cannot
what happed?i restore in DFU mode
why i want restore:because my customer forgot password

If you're unable to do the Restore, go into Recovery Mode per the instructions here.

HT201210 trying to update my iPhone 4 to latest 5x ios and getting a "cannot update due to firmware not compatible

Trying to update iPhone 4 to the latest iOS 5, the error "cannot update due to incompatible firmware" prevents install. Any idea on where to find firmware update or resolve?

The correct way to upgrade the firmware is to first assure that you have the latest version of iTunes, then connect the phone to your computer. Click on the name of the phone in iTunes, then "Check for Updates" on the iPhone Summary screen. It should tell you there is a new version, and ask if you want to upgrade to it. If you are using any other method, or you downloaded a firmware file from a web site, you are asking for trouble.
The only thing you might want to do is to delete any .ipsw files on your computer before doing the above, in the unlikely event that the update file was corrupted during download.

Ipodtouch(4G) 4.3(8F190) , cannot update or restore firmware with Itunes, it shows an unknown error 3192.

Hi, my new Ipodtouch 4G, using ios 4.3(8F190), I would like to update firmware to 4.3.2, even 4.3.3, it will stop between the processing, and display a message that there is an unknown error (3192), no matter I try to update or restore, What can I do now? Thank you.
Wan

This is what Apple says:
Error 3000-3999: (3002, 3004, 3013, 3014, 3164, 3194, and so on) Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an entry in your hosts file redirecting requests to gs.apple.com, or due to your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again.
Above from:
http://support.apple.com/kb/TS1275

Cannot flash Intel MEI firmware on p67a-gd65

well, since the first thread was locked up https://forum-en.msi.com/index.php?topic=144484.0 I think there should be another one to point out this problem. MSI knows of it (here: https://forum-en.msi.com/index.php?topic=144484.msg1080605#msg1080605) but we still haven't seen official responce or a fix to it. Maybe the fix should come from intel itself? p67 revised anyone?
Post your comments here if you cannot flash the firmware.

HU16E, you made the following statements in your first reply to pepe123's initial posting:
First:
Quote
If you have attempted to load the ME driver off your install disc & it fails, the chipset does not have the firmware installed.
Second:
Quote
This can be verified by the absence of the Intel Management Engine Interface not showing up in the Device Manager.
Third:
Quote
The 6 series chipset must be replaced. With almost 100% certainty
When I asked questions and commented on these statements I was not "attacking" you or "provoking" you into some sort of "debate". Stop projecting that and please refrain from taking such comments personally as this will intoxicate any kind of discussion. I was asking honest questions about the premises of your propositions.
Your first statement implicates a connection between "the ME driver" on an "install disc", the failure of installing that driver and the absence of the ME firmware as a consequence of that failure. That is a connection that I simply did not understand (and still do not understand).
Your second statement interpretes the fact that the Intel ME Interface does not show up in device manager as a 'verification" of what is implied in the second half of your first proposition (absence of firmware). Again, I do not believe that the former necessarely verifies the latter. And if you think so, please elaborate on that. It is not clear to me what premise that assumption is based upon.
Your third statement posits a chipset replacement as the only solution, and again, I did not (and still do not) understand the reasoning behind that conclusion in regard to statement 1 & 2.
Quote
I know very well driver & firmware are not the same thing, & can't believe that was brought up.
I brought it up because you drew a connection between a (Windows) driver on a disk and the ME firmware in your first statement:
Quote
If you have attempted to load the ME driver off your install disc & it fails, the chipset does not have the firmware installed.
Quote
A recent interpreted statement about 'all' the mainboards not being affected is believed to be incorrect on your part.
I am not entirely sure what you are referring to, but I am assuming that you are talking about something I said regarding the Intel Statement that only systems that were shipped since January 9th were affected. Under the conditions of the information available at the time I made that statement, it was not an unreasonable one. However, I have no idea what that has to do with the ME Firmware question.
Quote
Rather than brow beat me
Again, you need to stop taking comments as personal assaults. It was not my intention to "brow beat" you.
I am interested in trying find shed light onto the problem in question here without hastening to early conclusions. Based on the facts available at the moment I simply not willing to settle with an "absence of ME firmware" explanation that can only be solved with a chipset replacement. Even if that turns out to be true, there is no sufficiant information available at the moment to infer that or make it the only/necessary conclusion. Let's keep a room for the possibility of other explanations as well. That is all I am saying.
Quote
educational respectful correction with confirmed facts is always a good thing for everybody concerned.
Svet has made some tests in conjunction with someone from MSI to determine where exactly the ME Firmware is actually "stored". He found out that (at least in the case of P67 systems) that firmware is stored in respective area of the BIOS Chip, the same chip that holds the actual BIOS/UEFI Code. The following paper also indicates this as well:
http://webcache.googleusercontent.com/search?q=cache:mi50f3Vy534J:web.it.kth.se/~maguire/DEGREE-PROJECT-REPORTS/100402-Vassilios_Ververis-with-cover.pdf+Intel+me+firmware+resides&cd=17&hl=en&ct=clnk&client=firefox-a&source=www.google.com#88
Page 11/26:
Quote
The management engine’s (ME) persistent code resides in firmware within the same flash memory device as the BIOS, in computer systems [...].
The P67 chipset diagram also points into that direction:

Cannot format after updating Firmware!!

' I was able to format with the original firmware, but now I have updated it with the new version and cannot format it! Creative, please help!

+ Before installing the firmware, I could format the memory by the following steps:
) Press the "delete" and turn on the camcorder. Then I get some information on the screen such as serial number and?available memory space. It also prompts?the user?to press "Play" and "Delete" (if I remember correctly)?on the bottom of the screen.
2) Then I press "Play" and "Delete" to format the memory.
After I updated the firmware the screen with the same information appears but the prompt for formatting is not there anymore. When I press "Play" and "Delete" it does not format.
Hope this helps!

Suddenly, I cannot conect to ITunes Store. What to do?

What to do if I cannot connect the ITUNES STORE.?

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Cannot find the latest firmware for the Toshiba 40TL838G

Hi,
I'm trying to download the last firmware for the model 40TL838G but I can't find it.
Where can I find it?
Thank you.

Are you sure that TV is connected to internet properly?
How did you connect it? LAN / WLan stick (TOSHIBA Dual Band WLAN-Adapter WLM-20U2)?
In some cases it could be possible that some routers dont pass the firmware update due to locked ports. In such case you should check your router configuration. As additional option you could try to test the TV in connection with another network

WRT100 - Cannot conect PSP in firmware 1.0.04

Similar Messages

Maybe you are looking for