WRT110 and Vista SP1 - additional log on information is required to connect to this network...

Setup WEP 64bit . WinXP SP3 and iPod Touch connect fine but when I select the SSID via Vista it doesn't give the network option. How can I get the network propt option to appear.
[img]http://www.auburn.edu/oit/connectivity/wireless/images/new_connectionsVista10.jpg[/img]
"additional log on information is required to connect to this network
You may need to select a certificate or enter a user name and password to connect to this network."
[img]http://www.auburn.edu/oit/connectivity/wireless/images/new_connectionsVista11.jpg[/img]
I updated to the lastest firmware with no luck.
Using WRT110 firmware Ver. 1.0.04 (build 10).

toomanydonuts let me clarify again:
-XP SP3 desktop = able to connect.
-iPod Touch = able to connect.
New Vista SP1 laptop = NOT able to connect and DO NOT get a prompt to enter a Network Key. Instead I get:
"additional log on information is required to connect to this network
You may need to select a certificate or enter a user name and password to connect to this network."
here is an example screen shot of the above message (found on another web site).
http://www.auburn.edu/oit/connectivity/wireless/images/new_connectionsVista11.jpg
Then Vista SP1 as me to enter a user name/password/domain. This is a home network.
http://www.auburn.edu/oit/connectivity/wireless/images/new_connectionsVista12.jpg
No prompt for Network Key (on VISTA SP1).
My WRT110 is running the lastest firmware Ver. 1.0.04 (build 10).
Message Edited by FerociousLS on 02-04-2009 04:45 AM
Message Edited by FerociousLS on 02-04-2009 04:46 AM
Message Edited by FerociousLS on 02-04-2009 04:47 AM

Similar Messages

Why isnt my itouch not connecting to the wifi? everytime i try to conncect to a network and then i put in the password, it says unable to connect to this network! why is not working?????????? someone please help me!!!

Why isnt my itouch not connecting to the wifi? everytime I try to connect to a network and i put in the password it says "unable to connect to this network" why isnt working?! the password is correct and everything. I just dont understand why its not working. Someone please help me! thanks

Did it ever work with this WiFi system?
Do other devices work with this WiFi system?

Tv @nywhere PRO and vista SP1

hello
my media center doesn't work with VISTA SP1 and a TV@nywhere pro ,if i come back to vista standart, it works again.
simply the media center starts, but when i select tv for source it remains in loading with the logo on screen.
think i need a patch , like for the PLUS version.
help me thanks

Quote from: Covex on 07-January-09, 18:19:49
Unfortunately, I cannot uninstall sp1, so do anybody know a hotfix for pro cards and vista sp1?
As you can see you don't need fix:
Quote from: saeemon on 28-December-08, 17:45:12
hello
i tried to reinstall vista sp1 for the third time and now it works
i dont know what was the problem , now i happy

Boot Camp and Vista SP1

Hi. I have a Macbook Pro running Leopard and Vista. Is it safe to install Vista SP1 in Boot Camp 2.0? I haven't heard of too many issues, but just making sure it wasn't going to break anything. Thanks.

I'm having the exact issues as webcat, but I'm on an iMac 2.8 (early 2008) ATI video & 4GB using 10.5.4/5.
The BC util worked fine through partitioning (32GB) and Vista-SP1 (Ultimate) install, and the the OS-X CD-1 driver update - but once in Vista the stated symptoms showed up. I had initially ran Windows Update, but no Vista Ultimate updates were found. There was also an attempt to run some Apple software update but the pop-up went away before I had a chance to read it.
I have down loaded the BCUpdateVista32.exe and tried to run that (GUI) a few times, but it always fails with the "Boot Camp UI transform Update has stopped working" error - faulting module listed as ntdll.dll 6.0.6001.18000.
So, where to now is my question? I have seen some hope from the Cmd-Line 'softwareupdate' method, or I can run through the registry and 'purge/change' as deemed needed. The confounding thing is that the BC 2.1 update is a Windows EXE, so I need to work in that environment to get it installed, and I had presumed that with my updated 10.5.4/5 before I started, that BC would have been at the v2.1 level.
It seems I may yet need to burn a CD of drivers and and update the supplied OS-X drivers with the BC 2.1 items - is this possible?
Thanks for any help and direction with this.
GrayGuy

FAX through HP laser jet 3050 which is connected on a Windows Network. I m also connected to this Network and i print through HP LJ 3050. How can i sent fax through HP LJ 3050?

HOW can i sent FAX through HP laser jet 3050 which is connected on a Windows Network.
I m also connected to this Network and i print through HP LJ 3050. How can i sent fax through HP LJ 3050?

Welcome to Apple Support Communities.
Apparently there is no HP software support for the HP 3050 fax or scan functions with OS X 'Lion' 10.7:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02950970 #A1
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c0292511 4
Alternatives?
1) Run a Windows client on the Mac using Boot Camp or one of the available virtualization programs like Parallels, VMware Fusion, and others so you can run the latest Windows print/fax/scan driver.
2) If your Mac hardware supports an older OS X version, downgrade to one (Snow Leopard?) that still had support for print, fax and scan.
3) Buy a newer printer. A 2007 model is 5+ years old, and should now be fully depreciated in a business.

Qosmio G30: Conflict between Sigmatel audio driver and Vista SP1

Hello,
I have a Qosmio G30 PQG32E notebook and can't upgrade to Vista SP1 because the Sigmatel driver (6.10.5462.0) is conflicting with the service pack.
As some of you might know, Sigmatel no longer exists and IDT who bought them is as good as non-existent, saying to contact the OEM directly for updated drivers.
Is there any plan to upgrade the audio driver ?
There are huge memory leaks in my case from the audio driver.
When using Photoshop or Premiere Pro, the audiodg.exe proccess consumes 800MB and more after one hour of continuous work.
I am hoping for an updated more stable driver, and more stability from SP1.
Am I a dreamer?

Have your problems started after SP1 installation? Just for info: at the moment Toshiba does not support SP1. I really believe that you have some troubles and because of that I still wait with SP1 installation.
You are right about Qosmio. It costs a lot of money but using delivered recovery image installation you will not have any problem. About memory and how much resources Vista needs you can read everywhere. Even if you close some application RAM will still be occupied with different information. If you start the same application again you will see that application starts second time much faster.
It is Vista!!!
You have really nice notebook and you should upgrade RAM to maximum level. I am pretty the notebook will runs much better and of course faster. For such notebook 2 GB for Vista is really the minimum.

Acrobat Standard X and Vista SP1

Hello..
We are currently looking at packaging Adobe Standard X for approx 3000 Windows Vista machines in our firm.
The problem we have is that Adobe deems it necessary to have Service Pack 2 installed on the machine. We can change the launch condition of the MSI to install even if it doesn't have SP2 on but have no idea what functions wont work. We are currently running 14000 Vista SP1 machines so upgrading to SP2 is a mammoth task.
Does anyone have any information about why it needs Service Pack 2 for Vista, or what features wont work. During brief testing it appears to run OK, but I have only done the basics. I have hunted high and low on Adobe's site but not found much else than the tech specs
Thanks in advance

Hello Greg,
Could you please update to the latest version 11.0.07 and check this issue again?
Cheers,
Deepak

XP SP3 and Vista SP1 very unstable

Hello,
I have a 24" Mid-2007 iMac, with 4GB of ram. I'm trying to setup Boot Camp with either XP or Vista so I can run some CAD software (Solidworks) for a class I'm taking.
I installed XP SP3 using media that had SP3 pre-applied, and installed the Boot Camp drivers that came with my computer, then downloaded the Boot Camp 2.1 update. However, applications frequently crash - windows update fails randomly, the solidworks installer crashed, internet explorer crashes, etc.
I then decided to try out Vista - formatted the partition, started from scratch, same deal. Ran the Boot Camp driver DVD, applied the Vista Boot Camp 2.1 update, then the crashed begin. Windows Update failed about halfway through the updates, internet explorer crashes, didn't even bother installed Solidworks.
What is going on? I have absolutely no problems in OS X, and I've never encountered anything like this in XP or Vista before on other computers. Jokes aside, a fresh install typically works for a while. It makes me think its a hardware issue - but what hardware failure would only manifest itself in windows?

Pewp wrote:
You are hilarious, I haven't even insulted anyone here, nor did I get personal.
Your arrogant approach in your very first post was indeed personal - and insulting in it's tone. Remember my cyber friend, we have no emotions behind the words we're posting here - and we all should keep in mind that communication is 90% NON VERBAL - the 90% filtered out via black letters on a white page...
Just my 2 cents on emails, forums, and the like.
I'm pretty unbiased in terms of the OS argument.
OK, I'll take that at fave value, however your words that follow (from an earlier post of yours) read as pretty biased, IMHO:
Would you prefer it if Microsoft were to call these service packs XP 1.3, 1.4, 1.5, etc and charge people for a new OS or an upgrade? Also, don't say Apple has never provided security updates for OS X or any of it's software. I just said, before you go bashing things (like you were), perhaps you should get a bit more informed about what you are bashing. You are the one that got all defensive about it.
That was quite a defensive statement from you. If someone "bashing" MS's decision to cap a limit on RAM usage upsets you, DON'T DEFEND MS by calling me defensive - contradiction isn't pretty.
I did offer up some advice in that you should give Vista 64-bit a try because it is not the evil OS that most make it out to, especially post SP1. So, due to that I viewed you as being misinformed.
Fairly judgmental of me "personally" since you do not know of my experience with Vista. I do know of my experience with Vista and wouldn't want to deal with it on a regular basis - or infrequent basis for that matter. Again, if my opinion threatens yours somehow, don't "defend" it. Live and let live - my choice, my experience - you're not walking in my shoes so don't tell me to/expect that "I should like Vista" as you do.
I guess what I don't get is how the lack of memory support in 32-bit XP would be a common frustration. People should know this fact and should prepare for it if they want to get the use out of all their memory.
A valid point. For the sake of clarity I did research it as best as I could under the circumstances and within the time which I had available. To think otherwise as you suggest is - well, an assumption - and an inflammatory one at that.
As far as wasting RAM: I specifically mentioned only wanting more RAM for SOlidWorks in the XP enviro... What I dind't mention is that I'm a heavy Photoshop user, and often have all sorts of CS4 apps open concurrently. So my RAM isn't wasted, it's just not being fully exploited in my humble PC experiment. Thank you for caring so about it.
If you say issues with Windows just working in general with boot camp then perhaps you shouldn't point the finger at windows and maybe boot camp?
Sir, re-read my previous posts, please. You'll discover that I never complained about Windows' functionality or it's "working in general with BootCamp". My specific gripe, rant, bloviation was entirely focused on Microsoft's decision (obviously a business-driven decision) to limit RAM usage IN WHATEVER hardware - to 4GBs. I'm merely experiencing it personally in BootCamp, although I've hit that frustrating limit when I tech'ed 130+ PCs for nearly two years...
Want to kiss and make up now?
Sorry, you're not my type But I will peacefully co-exist with you in a cyber space.

WRT110 and Vista Fix

Ok, like various other users, I had a weird issue with my Vista laptop. It would work fine if it was hard wired, but as soon as I turned my wireless adapter on, the laptop would lose connection, even on the wired connection.
I did a lot of research, and discovered that for some reason, Vista likes to push IPV6 across the wireless, rather that IPV4, and alot of routers will disconnect, or flat out refuse to connect.
Here is how you fix the issue in Vista
1. Right click on your network connection icon, and select Network and Sharing Center.
2. On the left side, select manage network connections.
3. Right click on the wireless network connection, and select properties.Vista will probably pop up a "Windows needs your permission to continue" window, just select continue
4. In the large window that says "This connection uses the following items", deselect Internet Protocol Version 6 (TCP/IPv6)
5. Click ok
6.Either reboot, or if you feel extra frosty, open a cmd window, and do a ipconfig /renew
So far it has fixed my issues. I still have to upgrade to the newest firmware. I'm currently running 1.0.04, and I'm happily sitting here typing this on the wireless adapter.

thanks for this procedures, sir. it is really a big help.
for heads up!

Creative Mediasource 5 Player and Vista SP1

Hello there...
Having updated to SP today, I noticed that the MediaSource 5 Player no longer works:
Application name:
CTCMSu.exe
5.2.3.0
I have uninstalled/re-installed, to no avail.
Anyone know of a fix?
Creative: Please sort this!
Edit: Application was faulty prior to SP. Had to go back to a previous image to recover. Anyone have the same problem with an APPCrash with CTCMSu.exe?
Message Edited by gringopig on 03-24-2008 05:24 AM

Cheers OG...
I like the Creative player because it has a great sound with the "Crystalizer" and so on. After it, all other media players sound flat!
Not so good tho' if the software stops working for no reason tho'!!
Thnx for the suggestion. I will try yr options out.

Restored phone, and now i get an error message saying "itunes cannot connect to this iphone" error code: 0xE800000A

so i restored my phone and updated to ios 6, but now my itunes isnt recognizing my phone, and all of my contacts/pictures/messages etc are gone. please help. i'm having so many problems with this update, and i've never had a problem with an apple product yet.

Is your iPhone turned on or off? Are you still able to use it? If yes, sync everything to your iCloud so everything is saved. The following steps/suggestion will delete all your data so it is important to sync everything to your iCloud or iTunes:
Again, WARNING: This will restore the iPhone to factory setting.
Connect your iPhone to your computer and launch iTunes, turn your iPhone off (hold down power button), hold down power button (on top) while holding the home button (middle button/the only button on the iPhone) for 10 seconds. After 10 seconds, release ONLY the power button (on top) while continuing to hold down the home button (middle button/the only button on the iPhone) until a message appears in iTunes.
Then you can try updating yout iPhone again..
I hope this helps! Good luck.

I have iPad2 and original iPad. After upgrade to iOS5 neither will connect to wifi network. Network is working as I have connectivity with iPhone and Mac Airbook. What's the problem?

I have downloaded iOS 5 to both iPad 2 and original iPad. I cannot get wifi to work on either. It's not my wifi as I have connectivity with other devices, just not with the iPad. Any ideas?

I'm having the same problem. The iPad has never roamed particularly well between access points, but under IOS6 it doesn't seem to roam at all, it simply sticks with the access point it first connected with.
I don't have a solution for you, unfortunately.

PC SUITE 6.86.9.3 Vista SP1 Crash

Hello I really like the new look of the PC Suite, but I have a problem ... I recently installed SP1 for Vista. I have Nokia N70 ME and its was paired with my Sony VAIO VGN-CR190 over bluetooth. I had no problems with the previous version of PC Suite (6.84) and Vista SP1. My bluetooth stack is Toshiba v. 5.10.04(SO).
The problem comes when I pair my phone over bluetooth and I try to access it I am getting an error. Here is the log from the Windows Event Viewer:
Fault bucket 701006833, type 1
Event Name: APPCRASH
Response: None
Cab Id: 0
Problem signature:
P1: NclToBTSrv.exe
P2: 7.0.2.0
P3: 47be61ca
P4: ntdll.dll
P5: 6.0.6001.18000
P6: 4791a7a6
P7: c0000005
P8: 0003ed26
P9:
P10:
Attached files:
C:\Users\Denis\AppData\Local\Temp\WER9FE9.tmp.version.txt
These files may be available here:
C:\Users\Denis\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report0af3c3ec
Any help will be appreciated. I'm not in a hurry because I have a card reader, but sometimes I'm too lazy to take the card out just to trnsfer one picture.
Faulting application NclToBTSrv.exe, version 7.0.2.0, time stamp 0x47be61ca, faulting module ntdll.dll, version 6.0.6001.18000, time stamp 0x4791a7a6, exception code 0xc0000005, fault offset 0x0003ed26, process id 0x14f4, application start time 0x01c8c49a95fe99b2.
Message Edited by denis4o on 02-Jun-2008 01:50 PM
Message Edited by denis4o on 02-Jun-2008 01:51 PM

I have the same problem, and the funny thing is, the Bluetooth dongle works fine with my old Sony Ericson phone. So the problem must be the Nokia Suite?

When updating my Apps on my IPhone, it tells me my password is incorrect and wont let me log in. I came to this site and redid my password, so I know its right (as I had to put it in here to get into this forum) and it still tells me its wrong.

When I go to updaye my apps on my IPhone it tells me my passowrd is incorrect and wont let me log in. I changed my passowrd on this site just to be sure I had it correct and it still wont let me log in and still tells me it is incorrect. What can I do?

Updating your Apps is different from the Support Communities and use different passwords. Your best bet is to start with the support links here: http://www.apple.com/support/itunes/account/ If one of those suggestions doesn't work, then hit the "Contact Support" link from the list to the left for additional options.

Equium A100-060 touchpad doesn't work with Vista SP1

Hi, my touchpad doesen't work in Vista with SP1. If i use Vista or any other operating systems the touchpad works without any problem.
The driver installed on Vista Sp1 is the last available.
How can I solve this?

Hi!
Did you disable the touchpad with FN keys?
On my Satellite L300 its FN+F9
Do you have yellow marks in the device manager?
Did connect an external mouse and does it works?
Bye

WRT110 and Vista SP1 - additional log on information is required to connect to this network...

Similar Messages

Maybe you are looking for