WRT110 loses connection when second laptop connects

One laptop can be connected to the router at a time and have absolutely no problems. The problems occur when one laptop is already connected to the router and another one tries to connect to the router as well. When this happens the router completely loses it's connection to the internet. The only way I have found to fix this is to unplug and restart the router, which I shouldn't have to do every single time we want to use the internet. Sometimes it takes restarting it a couple times for it to work. Does anyone have any idea why this happens or what I can do to fix it?
Solved!
Go to Solution.

I had this issue for a long long time. The one thing that I have found to help combat this issue is to make sure that if you are using Vista that IPv6 is off. For some reason when either my roommates desktop, laptop or my laptop has this one it will crash the network. To do this in Vista
1. Click in Control Panel
2. Click View Network status and tasks or Network Connections if you are in classic view
3. Click Manage Network Connections
4. Right click on your Wireless or Hardwire connection however you are connecting to the router and go to Properties
5. Uncheck Internet Protocol Version 6.
6. Hit ok.
7. Reconnect the device to the network.
Initally it may crash the network. Allow the network 5 minutes to attempt to come back up on its own. If this does not work then go ahead and unplug and replug in the router. After the first crash for me it did not happen again.
Hopefully this will help with some of your problems. This is the only thing that I could find to combat the issues that you are describing. With this off we are able to run my laptop, his laptop, his desktop, an xbox360, and a blue-ray player on the network no problem. Good luck and if you have any questions please ask!
Message Edited by bigguy_132 on 01-30-2009 11:09 AM

Similar Messages

All devices on network lose internet connection when Dell laptop connected

I have successfully setup my AEBS network and am using two wireless clients--HP printer and Xbox access point (both 802.11 G) and a wired iMac that also is connected via Airport (so I can move it around if i want). I tried connecting my Dell Latitude D830 wirelessly and within a few minutes of connecting the AEBS loses internet connectivity. Unplugging and restarting the AEBS restores the internet but it just drops off again in less than 10 minutes. My question is, what might be causing this and what can I do about it? One peculiar thing to me is that I am using the WEP security option since the Xbox doesn't seem to support WAP2. When connecting the Xbox it reports the network as WEP but the HP printer and Dell Laptop but suggested the network was indeed WAP even though I'm clearing using WEP security. Maybe it's nothing but wanted to add for completeness.
The Dell is running Vista Enterprise edition.
Thanks for any help.

I've noticed a similar issue. Any time my HP/Vista laptop is connected to my AEBS it loses the network connection at inconsistant time intervals(~10-15 min).

Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

Hi All,
I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
Here is my server.xml
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<GlobalNamingResources>
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<Resource auth="Container" description="Users and Groups
Database" name="UserDatabase"
scope="Shareable"
type="org.apache.catalina.UserDatabase"/>
<Resource name="jdbc/DefaultDS" scope="Shareable"
type="javax.sql.DataSource"/>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.
MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<ResourceParams name="jdbc/DefaultDS">
<parameter>
<name>validationQuery</name>
<value></value>
</parameter>
<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>4</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>2</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>

<Service name="Tomcat-Standalone">
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/DefaultDS">

<parameter>
<name>maxActive</name>
<value>8</value>
</parameter>

<parameter>
<name>maxIdle</name>
<value>4</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>

<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>

<parameter>
<name>description</name>
<value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Host>
</Engine>
</Service>
</Server>
and my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">

<web-app>
<resource-ref>
<res-ref-name>jdbc/DefaultDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
Connection con = ds.getConnection();
return con;
I tried connecting as mentioned in this website
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
Please help urgent
Sorry for long file. Can any one please help me in solving this problem.
Thanks in advnace
Kurakula

I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
MOD

I have my wifi in my home with secure connection when i get connected to it ,it asks me the password and when i entered it, it shows that unable to join the network why is this happening...........

i have my wifi in my home with secure connection when i get connected to it ,it asks me the password and when i entered it, it shows that unable to join the network why is this happening...........

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

MacBook loses wireless connection when iPod touch connects to network

hi
ever since upgrading to 10.5.5. on my MacBook i've had the "intermittent network connection" problems that have been described and discussed (without any real solution from what i can see) in another thread.
PROBLEM: every couple of minutes my MacBook loses connectivity to the network - the AirPort icon still says that i'm connected, albeit with one less bar than before, but i can't connect to anywhere, not even to the wireless router - and to re-establish a connection i need to switch off AirPort, switch it back on, it will then reconnect, and after two minutes or so i have to do it all over again because the network connection drops again.
NOVEL OBSERVATION 1: reinstalling the 10.5.5. combo system updater helped somewhat. i used to get an error in system.log about there being too many state transitions on the wireless network and about network traffic reduction measures being taken to overcome this problem, but after reinstalling the 10.5.5. combo system updater this message never appears in the logs and I get kicked off only sometimes (see what i say in point 2 below)
NOVEL OBSERVATION 2: now my MacBook will only lose its connection to the net if i switch on my iPod Touch and switch its wireless interface on. in fact, the only way to avoid the MacBook getting constantly disconnected is to make sure that the wireless interface on the Touch is switched off in the Touch's system preferences; if I just sleep the Touch (top button) without switching off its wireless network interface first in its System Preferences, then the MacBook will keep disconnecting even while the Touch is in sleep mode (presumably the Touch keeps polling the network or something, even while it's in sleep mode).
DIAGNOSTIC NOTE 1: I have another wireless device (my Nokia E51, which has wifi capabilities) and if I connect it to the wireless interface then the MacBook's connection isn't dropped - i.e. the MacBook only loses its wireless connection when my iPod Touch connects to the wireless network.
DIAGNOSTIC NOTE 2: I have upgraded my wireless router (before I had a Linksys WRT-54GC, now I have a Netgear WGR614v9) but that has made no difference.
DIAGNOSTIC NOTE 3: I have also tried altering the router's settings (i have played around a_lot with this, trying every combination I could think of - e.g. staple down particular devices to particular ip addresses, use only 802.11g versus automatic b/g, etc) but that has made no difference either.
RANT:
The only thing that prevents these disconnections from occurring is to keep the iPod Touch's wireless switched off, which ***** because if I'm in the kitchen I can't have it switched on to monitor my email (yes, I've no life, i hang around waiting for emails), or if I go have a lie down and want to check out stuff on the net, or to browse the iTunes music store or whatever, then I know that my connecting my iPod Touch the computer will be disconnected.
This obviously *****, right? And a lot of people are having wireless problems with their MacBooks, right? And these problems seem to have been around for over a year, right?
So why hasn't Apple solved this problem yet? Or am I just being melodramatic?
Your thoughts on any or all of the above, or flames if that's your preferred method of communicating, are invited. =)
Cheers
dr.colekat

Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream.

Loss of laptop wireless connection when wired desktop connects

I haven't had this problem when i first bought the router but recently if my desktop is connected by a wired connection I am either unable to connect wirelessly via laptop, or if I am already connected, will be disconnected. Can anyone help please??? Thank you

Are you using any fixed LAN IP addresses on your network? If so, list all the fixed LAN IP addresses that you use. Also, if you are not using the default DHCP server range of 192.168.1.100 thru 192.168.1.149 , then please state your DHCP server range.

Crazy crazy crazy! Airport loses internet when second monitor attached!

Can this really be happening? I decided to try using a second monitor attaching via a mini dvi -dvi converter. Several attempts to get it recognised by the iMac without any success. Scoured the internet groups to see that very many (and I mean very many) others had this problem.
Solved it by swapping my dvi-I lead for a dvi-D lead. The difference is that the DVI-I lead has fewer pins than the DVI-D lead and the iMac mini dvi socked supplies a DVI-D signal. Phew!
So--pleased with myself at surmounting this I fired up Final Cut Pro, dragged the canvas window to the second monitor and had to play around with the resolution setting to get a stable playing of the timeline.
Decided to go on online and see if I was alone on this.
NO INTERNET CONNECTION!!!
30 mins later decided to unplug the second monitor (Philips 200) and got back my inet connection.
Tried the routine again and sure enough each time the second monitor was connected I lost the Airport connection!
Is it possible that the proximity of the second monitor fouls the wireless signal?
Or what?

Kaybee31 wrote:
So far no one has either claimed the same problem or offered a possible explanation.
As I said this loss of internet connection when 2nd monitor is connected is unbelievably odd.
It sounds like another case of EMI (Electromagnetic interference). I believe this is at the root of all these weird Airport or wireless problems. Interestingly enough many of these anomalies are exhibited on the newer generation Macs. Different materials were used, shielding could have been compromised either for cost cutting or by design error. Regardless I'm sure Apple is aware, unfortunately those who purchased these machines may be in the worse case, left with hard wiring for reliable internet and or network connections.......sorry.....

Losing broadband connection when Ipod nano connected

Whenever I connect my ipod to my computer, my broadband connection dips out. I am currently using Windows XP. Any suggestions as to why this is happening and any solutions to this would be appreciated. Thanks

How are you connected to your Internet connection - USB, Ethernet, or wireless?
I've noticed that some PCs tend to "reset" the connection to ALL USB devices whenever certain devices, such as iPods, are connected. If you have a USB broadband modem, it could be related to this sort of thing. I'm not really sure if this is an iPod issue at all, but you could try unplugging/replugging your USB modem, or you could try different USB ports on your computer to see if some are on a separate bus.

Outlook 2010 sticks on "Trying to Connect" when undock Laptops and VPN Connects Automatically

When our users undock their laptops the VPN kicks in automatically. All of the other network services just continue seamlessly. Outlook, however, sticks at "trying to connect". This is often accompanied by a password prompt.
This is easily solved by closing Outlook and reopening it (no need to enter password).
It doesn't seem unreasonable that outlook should require a restart after being disconnected like this. Just want to establish whether there is a way to have Outlook just re-connect without the need to close it and reopen it. Or is the need to
restart it unavoidable?
Thanks.

When our users undock their laptops the VPN kicks in automatically. All of the other network services just continue seamlessly. Outlook, however, sticks at "trying to connect". This is often accompanied by a password prompt.
This is easily solved by closing Outlook and reopening it (no need to enter password).
It doesn't seem unreasonable that outlook should require a restart after being disconnected like this. Just want to establish whether there is a way to have Outlook just re-connect without the need to close it and reopen it. Or is the need to
restart it unavoidable?
Thanks.
This is really a question for the Outlook forum, but from what I have seen over the years, thats just the way it is with OUtlook and MAPI or Outlook Anywhere. When you change the network, Outlook struggles..
Having said that, MAPI over HTTP with Exchange 2013 SP1 is working to eliminate those issues:
http://technet.microsoft.com/en-us/library/dn635177(v=exchg.150).aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Wifi on Macbook Pro does not work when Windows laptop connected

Does anyone know why this is the case or how to fix it? My wifi works great until my wife turns her windows laptop on and logs on the to the wifi. At that point, mine does not work until she shuts her computer down. Any ideas?

you both probably have the same IP address....
set your laptop to DHCP or type in another IP address...

HT5569 I am having trouble connecting to my wifi. I put in the password (the correct password) and it tells me that it is the wrong password. I just purchased this iPad and cannot seem to get connected. My laptop connects with a pin not a password.

I just bought a iPad and am trying to set it up. I have WiFi at my home but cannot get on with my iPad. My laptop asks for a pin number to join and the iPad asks for a password. I enter the correct password and it tells me that it is incorrect. I have talked to my WiFi carrier and they tell me that they do not know what it could be. Can someone please help me figure this out.

connectng with a pin # will not work with the ipad. you need to find out exactly what the actual wifi password is.
pin and push buttons are used by wifi protected setup. which is an optional feture of WPA
here are some ideas
go to the routers home page (typically 192.168.1.1 or 192.168.1.254) and see if you can click on "show password"
get the manual out, it should have the default user name and password you may need to access the routers page
if your windows computer connects, then you should be able to right click the wifi connection and click on show password as well. this is somewhere in the properties page of the wifi connection
also with windows its a good idea to click on "save wifi connection to usb drive" this can be used to connect other windows computers and xbox game consoles as well
if your laptop computer is a mac book you can go to the keychain or icloud keycahin and reveal the actual passowrd as well.
look at the actual router it might have directions on a sticker on how to access the routers configuration pages
if you enter the wrong password on the ipad you need to forget the network and try again

Error while obtaining JCO connection when creating JCO connection

Hey,
im having a problem when creating a JCO connection in the Web Dynpro Content Administrator. Creating the Modeldata (Application Data Data type) JCO Worked but when creating the JCO for the RFC Metadata (Dictionary Meta data) there is a problem:
In step 3.2 Msg server connection I cannot specify a system name and logon group, only the message server can be selected with the dropdown box.
After pushing the finish button i get the following stacktrace:
Failed to create new JCO client connection WD_RFC_METADATA_DEST: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection. at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:150) at
com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:356) at
com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at
com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at
com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at
com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at
com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at
com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at
com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649) at
com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at
com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248) at
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at
com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at
com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at
com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at
java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95) at
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160) Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve connection parameter for WD_RFC_METADATA_DEST at
com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestinaton(JCOClientConnection.java:664) at
com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:508) at
com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:248) at
com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:222) at
com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.<init>(JCOClientConnection.java:101) at
com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection(SystemLandscapeFactory.java:148) ... 30 more Caused by: java.lang.NullPointerException at java.util.Hashtable.put(Hashtable.java:393) at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter4MsgServerJCODestinaton(JCOClientConnection.java:558) ... 35 more
We are running WebAS 640 SP 14 on Unix.
Greetings,
Hannes
Message was edited by: Hannes Defloo

Hi
Please configure your SLD. Your SLD holds the system definition. Define a SAP WebAS abap system and then try to create a Metadata connection using WebDynpro content administrator. Now you will be able to see the msg server defined in the dropdown. Also ensure that you have the message server entry in your services file.
Refer these links for SLD
http://help.sap.com/saphelp_nw04/helpdata/en/c9/dc37520bdf4b48bb8f6d4329f073d5/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
Hope that helps.
regards
Ravi

My email will not connect when i am connected to wifi

When my iPhone4 is connected to my wifi network at home or my office, it will no longer connect to mail. I just get the spinning circle, and "Checking for mail..." message. I've had this for 11.5 months, and it's always been connected to my wifi at home. It's been connected to my wifi at work for about 2 months--I never had this problem until last night.
But--it did not do this at the Apple store (their wifi didn't have password protection--maybe that's the difference???).
Anyway--iMessage still works (as does my wifi iPad); and I can send and receive emails from my Xfinity app.
Help?

I did determine that it is NOT related to password protected wifi. 2 different Apple Stores, and no solution yet...

TC connected to internet, laptop connected to TC but no internet on laptop

Hi everyone,
I'm currently having an issue with my TC.
I connected it to my network in order to use it as router. I'm connected to the internet with time warner cable and it seems to be working with a fix ip. Whatever, I configured it manually to provide the ip adress, router adress, mask and domain. Then I restarted the TC to update the settings. The TC doesn't complain about the internet access (green led) but my laptop is not connected to the internet anymore but it is connected to the TC (everything works wirelessly with WiFi)>
Does anybody have an idea about what is wrong their ?

I am having a similar problem.
I connect to a modem from Charter. I get a green light on TC. I see what appears to be a strong signal on my Mac but my browsers will not connect. Safari and Firefox.
It created a new network but my Mac, my wife's HP-Vista, nor our Iphones will connect.
Yet it looks like it did a backup on TC.
Any ideas ?

Itunes is saying check network connection when i am connected to the internet already

hi i am trying to transfer music from my old ipod nano from like 2005. just got a new 8gb ipod touch from my brother and i have already transfered all of the songs from my nano to my itunes music library but everytime i try to sync the music to the new ipod touch it says "check network connection" and i have to "authorize" something. even after i installed the newest version of itunes 10.something, i registered the new ipod and everything and i am still having problems....please help! called apple and siad i have to pay which i refuse to do.

Try these suggestions in this order.
Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

WRT110 loses connection when second laptop connects

Similar Messages

Maybe you are looking for