WRT1200 Network error when paying music from external disk attached to the Router

Hi everyone, I have one problem with my new WRT1200AC wireless routerFrecuently network errors when playing music from external USB3 disk attached to WRT1200AC Any idea to solve this problem Thanks in advance Regards, Rod

Wireless Configurations
Ensure the default (linksys) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios for dual band routers. Can be anything and not something that's already in use by any neighbouring WiFi routers.
What wireless modes are you using?
Try Mixed mode, single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&respid=0&snid=4&dispid=0&cpage=search
What security mode are you using? Preferred security is WPA-Personal. WPA2 Only.
Ensure any devices with WiFi adapter drivers are updated.
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
WMM Support must be enabled for single wireless N mode to function.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&respid=0&snid=2&dispid=0&cpage=search
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=acca9b9008f04a66af818c2ab366001e_Positioning_the_external_antennas_on_the_Linksys_WRT1900AC.xml&pid=80&converted=0Rod2 wrote:
Thanks I play music fom external disk attached to the router from my internal netwok. No Internet traffic. The network error occurs between a notebook and the router in my home network Thanks Rod

Similar Messages

Removing Password Protection From External Disk Attached to Time Capsule

I have an TV and when I try to watch a show it always says that "file format is not recognized." I am pretty sure it is because my computer gets disconnected from the external disk that all the media is on. This disk is attached to my time capsule. I wish I could make it so it would automatically reconnect with the disk after being disconnected, but I can't figure out how to make the external disk non password protected without making my network password protected also. Does that make sense? How do I make a disk so it is not password protected if it is on my password protected network? If my computer is on the network then I should be able to access discs without having to put in an additional password, no?

I have an TV and when I try to watch a show it always says that "file format is not recognized." I am pretty sure it is because my computer gets disconnected from the external disk that all the media is on. This disk is attached to my time capsule. I wish I could make it so it would automatically reconnect with the disk after being disconnected, but I can't figure out how to make the external disk non password protected without making my network password protected also. Does that make sense? How do I make a disk so it is not password protected if it is on my password protected network? If my computer is on the network then I should be able to access discs without having to put in an additional password, no?

Error when checking out from external punch out catalog to SRM

Hi guys,
We have configured an external punchout in spro. Now when in portal, I am able to access the catalog. But when i check out from catalog to srm, it is throwing error telling "HTTP 404 not found".
Please help me resolve this issue.
Regards,
Madhu N G

Hi, Hope you are doing good. Nice to hear from you again. We don't have the httpwatch traces, but usually such issues get resolved by setting the parameter JSESSIONID.CookieDomain to "NONE". See: SAP Note No. 791765 : Mixed JSESSIONID Cookies from Different Servers SAP Note No. 1144722: Global configuration of session cookies and attributes See SAP notes as well: 1334956 - Various problems that solved by using FQDN in portal URL 654982 - URL requirements due to Internet standards Hope this helps. _ _ _ _ _ _ _ _ _ Kind Regards, Hemanth SAP AGS _ _ _ _ _ _ _ _ _

Data network errors when manually switching from 3g to 2g

Hi everyone,
Apologies if this has been posted before but im running out of ideas! - Got my iphone 4 a couple of weeks ago and have noticed a rather irritating problem with it. For some reason, if i manually switch from 3g to 2g the data connection drops.. I get 'cannot activate cellular data network' errors and i have to toggle airplane mode on/off to reset the connection. Is this a network issue? - I live in London and am with Vodafone... Their tech support are useless as all they suggest is resetting the phone or getting it replaced. Its my third handset in 2 weeks and im getting close to calling it a day and sending the phone back to Apple. Anyone out there in a similar situation? - Advice??

Bump
So no-one has suffered this issue? - Not even fellow vodafone uk users?

IPOD Nano experiences error when downloading music from iTunes

To make a long story short, my new Nano wouldn't fully download all songs from my iTunes library. I received an error about a missing file. As I followed the Apple suggestions to fix the problem I eventually got to a point where the Nano was frozen and wouldn't respond to anything. I couldn't even reset it. I took the Nano back and exchanged for another. The exact same thing happened again, which leads me to believe it's not the Nano that is the problem. Any help would be appreciated.

By "download" I assume you mean transferring songs from iTunes to iPod correct?
When the songs are transferring, try to pin down if it's any particular file from your library that's causing this. Watch the status window at the top of iTunes.
It may be a corrupt file from your library that's causing this, and if you can pinpoint which one(s), you can delete them from iTunes and try again.

Can't see the external disk attached to the TC!!!

Just bought a TC 1TB today. I put a WD 500G external disk to the usb port of the TC. And i found it ways lost the connection to the WD when i see the two airpot disk in my finder. TC's internal disk is fine and never lost, but i sometimes i can not find my WD external disk unless i unplug the power and plug it back again....
Any one can help?

In Finder preferences, is the box checked that permits the drive to be seen?

Error when downloading music from i-tunes...PLEASE HELP

I began downloading music onto my ipod mini...it downloaded about 12 songs and then said "Attempting to copy to disk''''failed. An unknown error occured (-69)". Ive tried everything including uninstalling and reinstalling all ipod programs. I need more music. PLEASE HELP ME!!

Hey.I have the same problems when i connect my iPod mini to my laptop it says can't locate songs and it will only download 11 of my songs. I tried everything that you did and nothing worked my next step is to call up help support.

Errors when reinstalling windows from recovery disks

My laptop crashed and could no longer find Windows, so I ordered a recovery disc (TR-IM00209299 - Win7 SP1 64Bit HomePremium (NH)) via the Toshiba Recovery Media Shop. I have now received the Windows 7 Recovery discs but they do not successfully install, and I'm unclear if this is an error on the discs I received, or an issue with the hardware. Below are the error details. Is this an error that any of you are familiar with? Please advise
Unpack System/WinRE ...
ImageX Tool for Windows
Copyright Microsoft Corp. All Rights reserved.
Version6.1.7600.16385
Error opening file V:\HDDRecovery\SWImg\15583XSP.swm
The data is invalid.
ERROR: ImageX could not apply System/WinRE V:\HDDRecovery\SWImg\15583XSP.swm Index 1 from HDD to W:!
Press any key to continue

I contacted Toshiba in parallel to making this post, and they suggested getting a new copy of the discs. I wasn't sure if it was likely to be a hardware or software problem, so thought I'd see if anyone on the forum could confirm either way. I'm waiting for the new discs to be sent out, and will come back and confirm if that cured the problem. Thanks Mister X

Delay in Doing something when Time Machine's External Disk Attached

I wasn't sure where to post this question. I have Time Machine running and it copies to an external LaCie hard disk.
I notice that when the disk is powered down (between Time Machine backups), when I do things like launch a program or even right mouse click on a word to look it up in the OS's dictionary, the computer pauses to wait for the LaCie disk to turn on, spin up, and then it loads the dictionary and word.
Why? What is telling the computer that this needs to be done? How to tell the computer not to do this? I can't think why this would be needed since nothing should be running off the TimeMachine backups.

I wasn't sure where to post this question. I have Time Machine running and it copies to an external LaCie hard disk.
I notice that when the disk is powered down (between Time Machine backups), when I do things like launch a program or even right mouse click on a word to look it up in the OS's dictionary, the computer pauses to wait for the LaCie disk to turn on, spin up, and then it loads the dictionary and word.
Why? What is telling the computer that this needs to be done? How to tell the computer not to do this? I can't think why this would be needed since nothing should be running off the TimeMachine backups.

Problems connecting external disk to my Thomson router

When i connect my external disk to my Thomson router the Mountain Lion can't access to it inside my home wireless network. With the app muCommander i can access it by writing the IP address but in Finder i can't access it. Any ideas?

I apologize if this is answered elsewhere, but I
could not navigate through to the right thread.
I've just bought a Maxtor One Touch III for Macintosh
(500gb). Having connected it to my Airport Extreme I
can see the disk in Disk Utility.
[portions omitted] .
What am I doing wrong? Please help
I am using the 750GB Maxton OneTouch III with the extreme software 7.1 with absolutely no problem. This is one of the drives that actually gets recognized even after power down - power up.

Old laptop died, got latest itunes on new laptop and recovered all music from external hard drive but ipad not recognised as device when plugged in? Do i reset my ipad2!!!

Old laptop died, got latest itunes on new laptop and recovered all music from external hard drive but ipad2 not being recognised as a device when plugged in so can't sync? Do i reset my ipad2?!!!! Its only taken 7 months to get to this point.
My ipad is set to sync via wifi but it is still trying to look for my old laptop which has been trashed..but i have deauthorised it and removed it from my account and still not recognised.
Please help (an extreme novice to Apple products)

Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

This may be a silly question but how do I get my music from my old ipod to the Ipod touch. when I go to move my music a error pops up saying your music wasn't copied to this ipod because it can not be played on this ipod. what can I do??

This may be a silly question but how do I get my music from my old ipod to the Ipod touch. when I go to move my music a error pops up saying your music wasn't copied to this ipod because it can not be played on this ipod. what can I do??

You will need to do it using a third-party utility such as Phone to PC. Also, see:
How to dowload purchased music
Downloading past purchases from the App Store, iBookstore, and iTunes Store

ITunes freezes when importing music from CD and also when playing,

Just recently iTunes has started to freeze when importing music from a CD - it just stops and the progress bar remains as it it. The whole mac then freezes and I get the spinning beachball. I can't use any other application. The same thing is happening when I play music - it's ok for a song or two and then freeze and the beachball appears. I've downloaded iTunes again and reinstalled and it's just the same. Using Safari and Mail etc is no problem at the moment.
I also have a problem getting the iMac to recognise external hard drives - it won't show them on either firewire 400 or 800. I can see my 1TB drive using usb ( it shows up on the desktop, whereas on firewire it doesn't do this) but if I try to open it and see the contents in finder, it opens, but doesn't dispaly the contents of the drive. I can see the disk size but just get a grey spinning wheel in the bottom right hand of the finder window. Timemachine does not work.

I have had the same problem & itunes crashes when i try to import a file. Now i can't even start itune. I've reinstalled itunes so many times, without a fix, I've lost count.
I did post and had no reply. I'll watch this post with interest.

HT1338 I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

Snow Leopard OS 10.6 is not available via Software Update, it is paid upgrade.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

Network Error when trying to Publish to iWeb

My website was working very well until I made many changes a few weeks ago to my sites on iWeb. Then I had difficulty publishing again until I tried to shut down the program and found it needed to be updated. I updated iWeb and made changes to the website and because it would not let me publish to .Mac I published to a folder. Now, I can no longer publish to .Mac or a folder. I have tried again and agin to publish to iWeb but I continuously receive this Network Error: Publish failed due to a network error. Check your Internet connection and try again.
If anyone can help me that would be great!
Thanks...CCM in CR

Here's another piece of data on this problem. I have also been experiencing the Network Error when publishing, but only on a dialup connection. And in testing I found that if I removed the images from the site so that it contained only shapes and text, it would publish over dialup successfully. The original site including images publishes instantly on a machine at another location that has a DSL connection.
There doesn't seem to be any problem with line quality on the dialup connection, and the same machine that gets the Network Error on publishing from iWeb can sychronize to a .Mac account and use iDisk to backup images over that connection without any problems.
So these results seem to indicate that iWeb has some parameters around network timeouts that are restrictive depending probably on a combination of factors like size of data objects in the site file, network traffic and connection speed. It would be nice if a detailed transaction log could be generated that would pin down what is happening more precisely.
-Allan

WRT1200 Network error when paying music from external disk attached to the Router

Similar Messages

Maybe you are looking for