WRT120N issue: sending hundreds of connection requests per second

I have a WRT120N and for about 1 year it worked perfectly but then my ISP started cutting off my internet because when the router tried to connect to the internet it sent hundreds of connection requests (or so they sad), even after I upgraded the firmware to 1.0.04 I still had the same problem. I got angry and started using it as a switch. Now I see that there is a new firmware out, 1.0.05, I hope that the same problem will not persist. But if someone can help me with some tips please say so. Thank you and happy holidays, Ewald

If, after a reset, it hasn't cleared. Take a look at your systems to see if you have a trojan or some backdoor virus that it trying to open connections in the background.
In other words, do a complete scan. And not with that free crap either, they don't pick up everything.
Hackers call it a "Zombie", its a system that has been compromised and can reap havoc on your network. Can cause denial of service attacks, sends out email from your email account (spam and phishing emails), all kinds of stuff. The important part is that it creates enormous amounts of sessions from your machine.
Just an idea

Similar Messages

  • More flexibility in limiting requests per second or minute

    We've read the docs on limiting the requests-per-second (max-rps), but we would actually like to set the threshold at less than one request per second. For example, we'd like to set the maximum requests to something like once every 5 seconds. But values like 0.2 for max-rps are not accepted. So the question is:
    Is there a way to set the maximum frequency of requests to something like once every 5 or 10 seconds?
    Is there an add-in that does that or could we create an add-in to do that?
    It looks like the server is NOT open source, so we cannot change the current code to address this, but certainly let me know if I'm wrong about that.
    In case it's helpful as background, the reason we want a lower threshold is that we only intend to limit access for html or jsp pages (not gif, jpg, js, css, etc.) That's because we don't want users to get half of a page, like the html, but no images or css, which would look like an ugly error. We want them to get the html complete with all the embeded files or get an error page. We're really only trying to block bots, which might make requests every second or slightly less often, and not block any human users. If there are other general suggestions for how to meet our goal, I'd love to hear them.

    No, the lowest max limit is 1rps. The request limiting isn't really meant for what you're describing, it is for limiting high request rates. At less than 1/sec such detection would have false positive with real users anyway, so it wouldn't be such a great way of distinguishing users from bots. I'm not sure it would prove very satisfactory.
    You could create your own NSAPI plugin (see docs on NSAPI usage) to implement your desired logic. I'd probably look into long term counters instead, but I don't really know the details of the exact problem you're trying to address.

  • Requests per second

    Hi all,
    I would get or calculate how many requests per second (ReqsPerSec) my WS is doing (average in a period).
    I looked at the Admin console monitoring data and at perfdump output.
    From console I get AvgReqs in last 15'. Iis it correct to calculate ReqsPerSec = AvgReqs / 900 ?
    From perfdump I get average RequestProcessingTime. Is it correct to calculate ReqsPerSec = 1 / RequestProcessingTime ?
    Which is the most correct/accurate way to get it?
    MTIA

    If you really need reqs/second then you can do so by :
    a) at time t1, collect perf-dump and get total requests served (say r1)
    b) at time t2, collect perf-dump and get total requests served (say r2)
    So avg rq/sec = (r2 - r1)/(t2 - t1)
    So you can yourself collect rq/sec based on last x minutes (or since the server start).
    Just curious what do you want to do with rq/sec?

  • BIND 9 - max request per second

    I use BIND 9 on Solaris 9, hardware: SunFire V280R, CPU 1.2GHz, 2x73GB HDD, 4xFE interfaces
    Now, I see on our FW, there are 3154 session request to DNS, and CPU use by BIND 9 is 98%. So, 3154 is very high
    I don't know how many request my DNS can service
    Please help me

    Guys any update on this?

  • Control the transaction per second ( TPS ) to down stream system through Oracle SOA

    Hi,
      As part of our business flow,  BPEL calling down stream system via OSB.
    However the down stream system can accept only 5 request per second.
    1. Tried implementing DB poller to invoke down stream system each second with 5 records.
    The flow is as follows .
    DB --> Poller --> ParentBPEL --> Down Stream System
    In this case Poller can able to poll 5 records from DB and push it to "DownStreamSystem" via "ParentBPEL" process.
    But here the contraint is , the "DownStreamSystem" strickly can able to process only 5 requests per second.
    If the "DownStreamSystem" is processed 4 request and processing 1 request  at first second, then in the next second the fusion should push only 4 request . Since the number records in processing state should be 5 at a time.
    Please help me out to solve this scenario or suggest me if there is any other alternative to achieve the solution.
    Thanks in Advance ...

    maybe throttling in the osb is of any help ?
    Throttling
    since you really have hard specs on the "currently processed messages" you could add some coherence cache and use that as sort of lookup to see what messages are getting processed at which time. (it's just some guessing, since i don't have any experience with the situation you're describing)

  • I have 2 Company ipads. They were set up by someone who has left the company. His email address was deleted when he left - so we cannot send a recovery email request.  He connected both iPads to 'find my iphone' - and we cant locate his mobile! help!

    I have 2 Company ipads. They were set up by someone who has left the company. His email address was deleted when he left - so we cannot send a recovery email request.  He connected both iPads to 'find my iphone' - and we cant locate his mobile! help!

    If you have the original receipts, you can take them to an Apple Store and they may be able to remove the activation lock. A good lesson learned to have an employee clear a device when leaving.

  • Symbol LA-4137's (Spectrum 24 Hi-Rate) sends repeated LEAP auth requests

    Anyone using the Symbol LA-4137 ?
    I'm troubleshooting at a hospital and they have many of these Symbol LA-4137 connect to a Alaris Pump. LA-4127 client is setup for LEAP and is sending 5 authentication packets per second. The radius server sends back a success only to get another re-auth request immediately. The network is Autonomous 1220s running 12.3(8)JA with WDS setup.
    This large volume of traffic from the Symbol LA-4137s (these are Alaris Pump's from Cardinal Healthcare) generates a Passed Authetication Attempts csv log file of 100MB per day on ACS. I estimate this is about 512,000 auths per day, far too much traffic. We upgraded ACS to 4.1 for multithreaded LEAP support and added another CPU as we say ACS failing to respond due to every packet due to the shear volume of packets it was getting from these Symbol devices.
    No roaming is occuring. The Alaris Pumps are usually placed in patient room and kept their.

  • Feature request: Frames Per Second info for clips / Warning when exporting

    I know that this may not be the right place to post, but I think many of us users would agree that this feature would be useful in iMovie. Especially for new users who are not even familiar with terms like "frame rate".
    Let's assume you import a video from your digital camera. You are not an expert in this field, so you edit the video in iMovie. Then you export it using QuickTime. The final video is jerky... and this can be due to incorrect frame rate settings.
    It would be nice if iMovie provided some warning if you are trying to import video at a different frame rate setting than your original video source. Just a pop-up saying "Your video was recorded 29.97 frames per second (FPS) and you are trying to export it into 25 FPS. This can cause some playback issues."
    Maybe even suggest the correct frame rate setting for the export. Apple's software is always trying to make things easier. I think regular users do not even know about "frame rates", so it might be a good idea to warn them.
    Also, how can you tell what FPS are your sources in iMovie? There is no way to tell what FPS was the clip recorded in. To find out, you have to go back into iPhoto, then drag the clip into QuickTime and only there you can select "Get Info" and find the recorded FPS for the specific clip.
    This seems like a lot of trouble to go through, just to find out a very basic information about the clip.
    I would like to see some functionality like this added to iMovie. I think many of us users would welcome this feature.
    What do you guys think?

    Click iMovie/Provide Feedback. That will send your enhancement request to the developers.

  • TS3899 issues sending email using my gmail account on my new iphone4s.

    so i was having issues sending email using my gmail account on my new iphone4s.  i called my provider, att - to fix the issue, mine anyway, under settings - general - reset - reset network connections.  fixes the send issue.  releases all of the other junk that was left on your old phone. 

    Hi Jari,
    Thanks to reply me.
    There is an workspace details where user solve that problem but now i have troed to access that workspace but its not working .i have cofusion how can i do this where i put
    apex_mail.send(
    p_to => v_recipient_list
    , p_from => v_from_list
    , p_subj => 'Hello world'
    , p_body => v_body
    , p_replyto => null);
    this package
    and how to and where set SMTP of Gmail and i don't know about gmail SMTP Server Specification
    i ahve jus create a form with
    P1_TO Text Field
    P1_SUBJECT Text Field
    P1_FILE_BRE File Browse...
    P1_COMMENT Textarea
    Please guid me...how can i do that step by step
    Thanks

  • Error by sending a Web Service request

    Hi,
    we generated a WSDL from an outbound-interface and build a web application with it. When we send a Web Service request to SAP-XI from our Web Dynpro client application, we get an error "CALL_CONSUMER_ERROR" (of category "XI_J2EE_MESSAGING_SYSTEM"). We find the following entry in the message-log of the adapter engine:
    Error: Return of synchronous errormessage to the calling application: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier.
    Error: The Transmission of the message with https://hpsaps01.inveos.com:8001/sap/xi/engine?type=entry failed, because: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
    does anybody know, how to solve this problem?
    Greetings
    Hildegard

    Hi Stefan,
    correct certificates are established in the meantime and the error-message in the adapterlog has changed. The errorcode still remains "CALL_CONSUMER_ERROR" of category "XI_J2EE_MESSAGING_SYSTEM".
    Adapter-log:
    Error: Return of synchronous errormessage to the calling application: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: java.net.ConnectException: Connection refused.
    Error: The Transmission of the message with https://hpsaps01.inveos.com:8001/sap/xi/engine?type=entry failed, because: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: java.net.ConnectException: Connection refused
    Are there missing any more permissions or is this another error in the configuration?
    Regards
    Hildegard

  • Outlook: "Send Immediately when connected" not working for Word 2010

    When i disable the option in Outlook "Send Immediately when connected" the messages are placed in the Outbox until i send them manually.
    But when i want to send a Word 2010 document from within Word 2010 by E-Mail the message is send immediately.
    Is it possible to place the message/document in the Outbox just like with Outlook?
    Thnx in advance.

    Hi,
    I cannot reproduce this problem in my environment. When I send a Word document by clicking File > Save & Send > Send as Attachment, it just go to the Outbox like the common message.
    Does this issue happen to all Word documents at any time?
    What's the send/receive interval you set in your Outlook? It could still occur that your message will be sent near instantly when you send a message right before the automatic send/receive interval takes place.
    For more information, please refer:
    http://www.msoutlook.info/question/181
    Regards,
    Steve Fan
    TechNet Community Support

  • Requests per minute in idle conditions in EM

    Hello Gurus,
    We are having an issue where in our Financial Reporting server is going down after throwing an Out of memory error in the logs in Weblogic.
    We have been monitoring the Financial Reporting service in the Weblogic console and in the Enterprise Manager to see the performance and have observed the following --
    - Initially the Heap free percent in the Financial Reporting server is staying at 70 - 80 percent for some time immediately after the services are started.
    - The heap free percent keeps on going down as the time proceeds.
    - The heap goes to 0 and ultimately the services goes into shutdown state in weblogic and becomes unaccesible.
    We also observed that the Financial Reporting service shows requests per minute to 80 in the env where we are facing this issue, however it is showing as 0 in the other env which are exact replica - http://s15.postimg.org/bt756hvuj/NEW_PROD_FR_in_Enterprise_Manager_Idle_Condition.png
    If someone can point us on what we need to check that would be great. as we are not sure as to why the request per minute will be around 80 in idle conditions.
    Any help will be highly appreciated.
    Thanks,
    hyperionEPM

    Sid_Middleware wrote:
    Hmmm... you can always try to boot up weblogic with more memory. Look at $DOMAIN_HOME/bin/setDomainEnv.cmd (or .sh in unix) and check for MEM_ARGS variable which specifies memory settings. Double the memory requirements and restart weblogic and see what happens.Increasing the memory is not a concern here, but the thing is that it keeps on going down even when our servers are idle.
    Also, what is Requests (per minute) as shown in the screenshot and do you know why the Requests (per minute) is showing around 80 even when there is no work going on?
    We have other environment which are again idle and the value is 0 there.
    Thanks,
    hyperionEPM

  • Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

    Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
    Detected Problems:
    - Access denied for attached mailbox (department mailbox)
    - Access denied for delete or move messages on own mailbox
    - Can't send new messages with error (Error: [0x80004005-00000000-00000000])
    Solution:
    - Rollback to Exchange 2010 SP3 - Rollup 7
    - You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
    Algunos de los destinatarios no recibieron su mensaje.
    Asunto:     Hola
    Enviado el: 11/12/2014 8:35
    No se puede localizar a los destinatarios siguientes:
    '[email protected]' en 11/12/2014 8:35
    Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red. 
    Error: [0x80004005-00000000-00000000].

    See the following forum thread: 
    https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

  • Connection request timed out - problem

    Hi, our errorlog confirms there are regular "Connection request timed out" errors in our web-application (asp.net with odp 9.2.0.4).
    Now we did a standard ODP installation, so i don't know how all the Pooling parameters are set up initially. But i found metalink note 261377.1 which states that the max number of connections also depends on the setting of maxconnections in the machine.config on the server. right now this setting is (windows server 2003):
    <connectionManagement>
    <add address="*" maxconnection="2"/>
    </connectionManagement>
    Apart from having to install patch version 9.2.0.7, could this be part of the problem? Or could this also be caused by wrong programming practice?
    Furthermore: in metalink note 240997.1 i found an example of setting several pooling parameters at connect-time. Is this the only way to do it, or is there something like an odp.config where you can specify these parameters?
    Regards, Paul.

    Hi Paul,
    1) "how the pooling parameters are set up initially": refer to the odp.net documentation, it tells you what all the default parameters are. The key parameter in this case would likely be "max pool size" which defaults to 100.
    2) "maxconnections in machine.config": I looked at that note which doesnt contain very much detail, but couldnt force a problem. maxconnection="2" is apparently the default, it's what mine is set to, and I can open 100 connections without problem. It may be that theres another setting that can affect this (I doubt the guy who wrote the note just made the info up) but I dont know what that is top of my head.
    3) the pooling parameters can only be set in the connect string itself. You could certainly store the settings in a System.Configuration.ConfigurationSettings.AppSettings file however.
    4) "Connection request timed out" is typically not an Oracle software problem, but more frequently an issue with code not cleaning up after itself properly. To confirm whether you've hit "max pool size", check v$session; how many actual connections does that app have? Make sure you're closing and disposing the connection, and additionally the command, reader, etc, under all circumstances (ie, a finally block).
    Hope that helps,
    Greg

  • Controlling multiple travel requests per day via schema

    Hello,
    I am working on Travel Management.
    My client wishes that it should not be possible for any employee to raise more than one travel requests per day.
    In the schema, the check box- Multiple TRs/Day is not available. I think with the help of this, maybe issue could be resolved.
    I am not sure.
    Can someone point out what could be missing? What should I do to control this?
    Thank you.
    Ruth Dhamone

    I'm on NW AS 7.03 ABAP Stack 731 Level 13, ECC 606 (EHP 6) with SAP_HR 604 Level 81 and EA_HR 607 (HR-Renewal 1) Level 32 over here. Maybe they really removed it... or it's not available for the deviant Public Sector ;-/. Doesn't really matter though, we don't need it, I was just curious ;-)
    Anyway, since this is not your problem (I misunderstood), there are two possibilities I can think of at the moment:
    1. The Trip is still in the future, hence the Schema doesn't have to be changed and the system remains in technical Schema PL (which is unlikely in your case if the status really says "Trip Completed"). I.e. your Trip is not in the future, is it?
    2. Only one of your expense Schemas qualifies for the trip. In that case the system silently defaults to that one and you don't get the option to choose from a list.
    Cheers, Lukas

Maybe you are looking for