WRT120N 'Limited Access' & Other Problems

Searched the forum but couldn't find anything specific to the limited access problem.
I have a WRT120N with Firmware 1.0.06
First peculiarity is that I can't access the web based admin screen from Firefox 7.0.1. The password prompt appears but won't proceed from there.
Second, and main issue is that frequently (several times a day) I get a 'Limited Access' error on my wireless connection. On mouse roll over Windows 7 Pro gives the error message 'no internet access'. This problem appears to resolve itself after several minutes or straight away if the router is powercycled. During these 'Limited Access' moments I am unable to connect to the route web based admin page nor ping or tracert.
Settings:
WRT120N
Firmware Version:
v1.0.06 build 001 Apr 29 2011 11:08:40
Boot Code Version:
v0.03
Connection Type:
Automatic Configuration - DHCP
Mode:
Wireless-N Only
Network Name (SSID):
(removed)
Channel Width:
Auto (20MHz or 40MHz)
Wide Channel::
Auto
Standard Channel:
Auto
Security:
WPA2 Personal
SSID Broadcast:
Enabled

For the first issue:
*Did you type 192.168.1.1 on the address bar? Also, the default password is "admin" and you have to leave the Username field blank.
Have you tried doing the following?
* Connecting the computer directly to the modem. The limited or no connectivity issue may be due to a problem with the Internet connection. If you still cannot connect to the Internet, you may need to call your ISP.
* Connecting the computer directly to the router with an Ethernet cable. If that didn't work, you might want to check the firewall settings. Try setting it to Low or try disabling it for the moment.
* If you're able to connect to the router with an Ethernet cable, you can also try checking the wireless settings. Try setting the network mode to "Mixed" and select the 20MHz Channel width and 6, 9, 11 channels.
* using another wireless device to connect to the network wirelessly. There's also a possibility that the problem may be resolved by updating the firmware of your wireless computer's adapter drivers.
* The location of your router is could also affect the wireless connectivity. As vai_fan mentioned, you need to avoid placing the router near any other devices which emit wireless signals like cordless phones, microwave ovens, etc.
"Don't fix it if it ain't broken."

Similar Messages

G580 Limited access Wireless problem

Hello,my first post here.
G580 wireless adapter BCM4313
Try different divers,but problem still exist.When i surf on internet everything is OK,but when i put something to downloading my connection get limited access and need to disable wireless card to connect again or restart computer.The problem is not from my router for sure.Appreciate any help.

So far, no solution yet. Do you have a Broadcom wireless N chip in your system?

MSI GT70 with Limited Access Internet Problem

Hi I'm using MSI GT70-0ND
everything working fine but yesterday I did upgrade window 8 ---> 8.1 and Ethernet Lan still working. anyway when I'm using wifi i can't it say limited access (before I changed it to window 8.1 i can use wifi) so I refresh my notebook to turn window 8.0 again hope can solve this problem
but this change makes problem because I can't use internet lan and wifi too
the way i did(but it can't be solved)
1.uninstall killer network
2.restart
3.try use cleaning killer x64
4.restart and then
5.install bigfootkiller network( i try all firmware but it still problem)
i don't know how to do it (and this icon also have yellow mark) so what i should do
thank you.(sorry for bad english)

No resurrections please
>>Please read and comply with the Forum Rules.<<

How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

See Terence Devlin's thorough explanation here.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

Limited access log ons for others in company

Is there a way for someone else in my company to log on with limited access to submitted forms only and not be able to alter designs/layouts/preferences, etc?
Thank you

You can designate someone as a Contributor, which gives them the ability to Tweet the link to the form, Add/Delete responses from the View Responses tab, export responses and print summary reports. This level of user can see all of the settings, but cannot change them. The Design tab shows, but they are not able to make changes to the form.
If you want to be more restrictive there is the Reader user. A Reader cannot see the Design, Test or Distribute tabs. The Options tab only has the Email Notifications item and that is only availible if you have enabled the feature (it is greyed out if you have not selected it). The View Responses and Summary Report tabs appear, but Reaaders are limited to exporting and creating summary reports.
-Jeff
Jeff Canepa
Software Quality Engineer
Adobe Systems, Inc.
[email protected]

TS1424 Getting error -1202 when trying to connect to My Wish List. Says there was an error in the ITunes store and to try again later. Any work arounds for this? I have no other problems accessing anything else.

Getting error -1202 when trying to connect to 'My Wish List" in ITurnes. Says there was an error in the ITunes store and to try again later. Have no other problems connecting or purchasing......

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen L*/Coo* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

Think disabling WMM on G580 solved wifi Limited Access issue

I'm posting this in the hope the hope that it may help someone else. I have a G580, model 20150 with Windows 8.1 and the Broadcom wifi card. Like many of you, I had the limited Access dropout issue. Here's the things I can remember trying previously:
Switching from the Microsoft Broadcom driver to the Broadcom driver.
Turning off power management on the Broadcom driver
Setting IBSS mode to just b/g
Disable Bluetooth collaboration.
Disabling all things power managment I could find.
etc...
The thing I found that seemed to fix it once and for all is going to the Advanced properties of the Broadcom and disabling "WMM". As I understand it, WMM is a QoS feature for prioritizing audio/video port traffic over data. Supposedly, you can't take advantage of wireless N speeds with WMM off, but I'll trade performance for not having to reconnect every 15 minutes.
I'm not going to mess with telling you how to disable WMM since there are tons of instructions and discussions on the interwebs. I also can't guarantee that it wasn't a combination of WMM and other fixes that solved my problem because I'm not willing to experiment on my finally working pc. My system has been constantly connected and going strong for 12 hours.
Good luck and I hope this helps.

Don't these usually work by intercepting the DNS quieries and then redirecting you to the gateway for authentication? Check your DNS settings and try to use theirs for the nameserver. Make sure something else isn't getting specified such as Google Public DNS.

Can't access other accounts

Suddenly I can't access other accounts in my Mac, everything works fine but when I choose to log into other user account it just remains in the progress bar and never logs in, even if I create a new user account it does not let me in (password or not). The information is intact but I just can log into the administrator account (no changes has been done in the accounts administration since they where created, everything happens in a sudden)

With 10.3.9 you would go System Preferences-> Accounts -> (click on an Account)-> Limitations, then either No Limits or Some Limits depending how they were originally set up.
You can adjust the criteria at this point.
You may want to try deleting an account that is least used and re-adding a different one in its place. This will give you an account to experiment with to see if it behaves as the other accounts you're having trouble with.
You'll likely be able to solve the problem by seeing what is different between this new account and your old ones.
Hope this helps. If so please let the Apple Discussion forum know.

WRT54G Limited Access in Vista

I have an XP and a Vista machine on my wireless network. The Vista computer keeps going into limited Access Connection after it is on for a while. The XP machine never looses connection. To connect again all I have to do is disconnect from the network then reconnect and it works fine, but I hate having to do that all the time. My cousin with Vista and a WRT54G router has this same problem also.

Update firmware, perform hard reset. Set all settings again. Change wireless channel to 1,6,9,11 and check which is best for you. Change advanced wireless settings : change beacon interval to 50, fragmentation threshold to 2306, RTS threshold to 2307, DTIM to 2

Lenovo G400s Wireless Connection Limited Access on Windows 7 Ultimate - 32 bit

Just bought Lenovo G400s, install windows 7 ultimate - 32 bit on it.
It turns out the wireless network driver need to install manually, the disc driver that came with laptop was for windows 8.1. So I went to lenovo website, put on the series and download the wirelss network driver which is around 250 MB.
I installed the driver and connect to the wireless network. My office wireless was on security and use static ip. I changed the ipv4 ip static already. It connected for a while, 1-2 second then lost connection. I checked with ping to google, got 2 records of live connection which is very short. After that it try to reconnecting itself again and again with status said "Limited Access"
I search in google, read some forums about problem in different series, so I use another computer go to Intel website to download latest driver. Got it installed, but it's still the same.
I try download broadcom driver, but it's really different and doesn't work at all.
Now I don't know what to do.
Windows 7 Ultimate - 32 bit
Inter(R) Centrino(R) Wireless-N 135
Driver Provider: Intel
Driver Date: 1/26/2014
Driver Version: 15.11.0.7
Digital Signer: Microsoft Windows Hardware Compability Publisher
What makes it weird, although from intel website said the driver date is in 3/21/2014, and the version is 16.11.0, but this information I get from device driver was different.
Here's the intel's website if you're wondering:
_https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+Wi-Fi+Products&ProductProduct=Intel%C2%AE+Centrino%C2%AE+Wireless-N+135#&OSVersion=Windows%207%20(32-bit)*&DownloadType=Software%20Applications
Can anyone help me?
Solved!
Go to Solution.

Today I want to install windows 8.1 on it, because the laptop came with windows 8.1 driver disc.
However, I try the wireless connection once again , one final try before I clean install the OS.
It turns out the internet connection is connected. Ping is quite stable, got a small drop. Nonetheless, IT'S CONNECTED!!!
I don't know what happened, I tried thousand ways yesterday and gave up. Today I don't set anything just try connecting with static IP set the ipv4 just like I did yesterday, and it connects without hassle!! is there a pc fairy or what?
The possible way I can think of is the router's internet connection's got restarted since It's a new day at office.
Despite how it solved still mystery to me, I think I mark this thread as Solved.

Set up TM w/Limited Access to one laptop & Full Access to another?

Dear Apple,
I just received my Apple 1 TB Time Capsule. Can someone please help me with a network configuration I want to set up?
I have a cable modem, and, three computers: a G4 iMAC (system 10.5.5), an Apple MacBook (system 10.5.5), and, a PC laptop.
The Time Capsule is connect directly to the cable modem.
Regarding the computers:
(1) I want the G4 iMAC to connect directly, via an Ethernet cable, to the Time Capsule, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature, and, with allowed access to my HP inkjet printer (class 6110);
(2) I also want the MacBook laptop to wirelessly link to the Time Capsule via the Airport utility on the laptop, and, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature (using WPA/WPA2 security, and, without the network name visible to third parties), and, WITH allowed access to my HP inkjet printer (class 6110);
(3) I want the PC laptop to wirelessly link to the Time Capsule (using WEP security), but WITHOUT ACCESS to the Time Machine, WITHOUT access to the back-ups on the iMAC, WITHOUT access to the back-ups on the MacBook, and, WITHOUT access to the inkjet printer --- I only want the PC to use the Time Capsule as a WIRELESS ROUTER so that the PC laptop can access the internet.
(4) And, finally, I want to specify (Time-Capsule/Time-Machine/server ) access ONLY to the iMAC and the MacBook, so that others cannot gain any access.
I specifically need help to set up and configure the Time Capsule so that the PC laptop, as stated above, should have limited access to the Time Capsule --- namely, only to access the internet, and, not even be aware of stored data on the Time Capsule, not even be aware of the inkjet printer, and, not even see my WPA network name when the PC scans for wireless devices.
I also want the iMAC and the MacBook to have access to each other’s data stored on the Time Capsule (like a common server).
I have an old D-Link DI-624 wireless router that I used before buying the Time Capsule, which is available, if needed. Hopefully, I can configure the Time Capsule so that I would not need the old D-Link.
Thank you in advance,
David.

Not a problem. I just wanted to point out that you won't get any "official" answers from Apple on this board. It is all user to user and we only know what we know and some of the time it is conjecture on how to fix a problem if we've never seen it before. I try to point out when I'm guessing, but I don't always remember to rephrase my statements.
I'm not sure how to set up the Time Machine, but look for an option to only serve out files via AFP (Apple Filing Protocol) only. Turn off SMB sharing, if possible. The PC won't be able to understand AFP--it communicates via SMB (Server Message Block). I would think you should be able to set up
If the PC can use WPA or WPA2, use that instead of WEP. There is no way to set up special passwords for individual users on a wireless network. It is all or nothing. Now, the wireless password could be different than the password needed to access the files, I think. So, you could set up a simple WPA password for wireless, but set up user accounts with strong passwords for the file server. Again, I don't have Time Capsule, so I don't know how to set it up. Hopefully, I've put enough keywords in for you to look through the configuration options and get it set up.
As long as this thread stays open and unanswered, more people might look in and have a more specific answer for you.

Network issue Windows 10, limited access

I have totally no idea what to do. This thread is not about a smartphone problem
Ive updated from Windows 7 to Windows 10 build 10074
I dont have a Internet connection at all. Every network i connect to it says limited access does anyone have windows 10 and the same problem ?

Hi Curnow1,
I moved your thread to Other Discussions General since the question was not related to a smartphone.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Limited Access

Can anyone please advise me on the matter above?
After a period of usage with Airport, my network shifts to limited access. Not exactly sure what is it in the settings I need to change, but would greatly appreciate some input.
Thanks,

Still no solution. I've done everything I can find posted on the internet to "fix" the problem, but nothing works. I've also had Dell Support trying to fix the problem for three days and still no fix. A complete waste of money buying this new laptop with Windows 8.1. I'm going to do a complete restore on my old Toshiba with Windows 7 and start using it again. It's a piece of junk, but at least I can stay connected to the internet.

Limited Access User

Hi All
I have query, the site is anonymous.
I have limited access user who has permission to an item in the List, does he can able to view the site (Once he logged in)?
Thanks
Joe

Try looking
here
If this is helpful please mark it so. Also if this solved your problem mark as answer.

WRT120N 'Limited Access' & Other Problems

Similar Messages

Maybe you are looking for