WRT120N problem with home-plug "TL PA101"

I have bought a WRT120N few days ago.
I have one PC is connected to the router though home-plug "TL PA101".
But I find that the router cannot detect the home-plug in the GUI ->status->DHCP client.
And also the "network magic" ->add device or network map.
But the LED on the router port (home-plug) is twinkle.
The PC cannot access to Internet.
By the way, the connection is OK if I directly plug the cable into the router port.
Can anyone help me about this question?

Did you connect your computer directly to the ethernet slot on the router.. and then check if you were able to go online or not.. then you can also check the DHCP client table (For a valid ipaddress).

Similar Messages

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Problems with home button on iPhone 4

problems with home button on iphone 4

If its due to sensitivity issues, these self help guides might help.
http://www.youtube.com/watch?v=zNwr_mxgs9Q
http://www.youtube.com/watch?v=lSqPC1V0PPg&feature=related
By the way, alcohol based hand sanitisers work too.
Don't overapply it in one go though. You'll have to allow the alcohol to evaporate.
One final tip, after its dried, I'd recommend you to leave your iPhone's home button facing a laptop's vent just to bake it a little drier.

I keep getting a message about a problem with the plug in container for firefox. what does it mean?

I am getting a pop up box saying that there is a problem with the plug in container for firefox. It keeps saying do I want windows to find a fix for it and close it or do I just want to close the program. What is this plug in container for firefox and why am I constantly getting this message? It has been happening for the past month or two.

It means either you have a faulty/out of date plugin, or your firewall/antivirus is causing problems with Firefox.
Make sure you update all your plugins and disable unwanted ones.
https://www.mozilla.org/en-US/plugincheck/
https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons
Also, make sure your firewall/antivirus is not blocking plugincontainer.exe from the Firefox folder in your computer. How you make sure that's not the case will depend on your firewall/antivirus.

Problem with search plug-in in ver 5.9

Hello
I have a problem with search plug-in when you type some key words and press search button it works fine, but if you press enter jou have following error:
Whoops. Something broke.
Version      5.9.6.43135
Message      Invalid postback or callback argument. Event validation is enabled using in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.
Source      System.Web
Stack      at System.Web.UI.ClientScriptManager.ValidateEvent(String uniqueId, String argument)
at System.Web.UI.Control.ValidateEvent(String uniqueID, String eventArgument)
at System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBefore
Our technical people have been notified.
We're sorry for the inconvenience.
Thanks
Greg.

Grzegorz, I'm going to guess this is a problem with the version you're using. We're using 2007.0.620 and whenever we hit enter on the field instead of the search button itself it returns no results. As far as I can tell, it's a bug in the system.
It looks like updating to the latest version (624) isn't helpful either, although both 620 and 624 remove that nasty explosion that you're getting and instead just return the same page with no search results.
There may be a way to edit some code-behind to detect when a postback is being made, although given the locked nature of Web Tools I doubt it. If you can find a way to have the button be recognized, let me know - otherwise, I'd say it's a bug that needs to be addressed in the next version.

Motion 3 won't open citing problems with "Ozone plug-in" - Any suggestions?

Motion 3 won't open citing problems with "Ozone plug-in" - Anybody ever experienced this? I tried dumping all motion app's and reloading but same thing happens. Any ideas? Thanks.

Motion 3 is part of Final Cut Studio 2. There are many threads on these boards about trying to get those apps to install properly on OS versions above 10.6.8. Here's one such thread. A search will bring up additional ones.
Russ

I have some problem with home sharing

I have some problem with home sharing. I have iPad, iPhone, MacMini, MacBook and Apple Tv. Five items. I can't add other items to home sharing, like iPhones and pc of my sons, and my wife's pc. More than home (Family) sharing it becomes Single sharing. Is there any solution?

Post in the iPhoto forums.

Problem with home wifi and nokia n8

I have a problem with home wifi and nokia n8.
The problem is that seamlessly connects to wifi but 2 or 3 mb download is blocked and I have to reset router.
I have other devices like nokia n86 and other phones that connect well and do not give this problem.
Could anyone help me?
Thanks

i have a similar problem. it connects prefectly to wlan but after sometime the connection goes and i have to disconnect and reconnect cause ovi music or maps or opera says internet not connected. Can someone help me out here?

I'm having serious problems with Lightroom plug in for Facebook not working on my iMac. Help!

It started about a month ago with LR4. I kept getting problems with not being able to publish to Facebook because of problems with the plug-in which had been working perfectly up to then. I had a run round that worked by disableing and reloading the plug in. I upgraded to LR5 but the problem persisted and in fact just became worse. I can no longer publish to facebook from LR. I deleted the LR app in facebook as someone advised but now I cannot re-authorise with Facebook. When I go to the "connect" buton nothing happens. This is a serious problem that may make me reluctantly abandon Lightroom if I cannot find a solution. Can anybody help?

According to the Lightroom Facebook page, Facebook broke it and Facebook has to fix it- there is no ETA.
You can read several posts here (with Adobe responses as well) https://www.facebook.com/lightroom?fref=ts&filter=2

Problem with home button and "messages" app after upgrade to iOS 4.1

Hello,
I have noticed two interesting problems with my iPhone 4. I am not sure if it is in conjunction with the upgrade to the iOS 4.1 software, but I did not notice the problem prior to this. Both of these problems are very odd and are hit or miss. I have tried restoring and the problem is still present. Also, since both problems have presented at the same time, that is why I am starting to believe it is not hardware...
Problem 1: The home button has become considerably unresponsive. This is not all the time, but it does happen a lot. Sometimes it won't work for about 5-8 clicks and I have to use the power button to access the phone.
Problem 2: When composing a new text message the cursor would always default into the "To:" section of the app which allows you to easily type what contact you are trying to message. However, I am having the issue now occasionally when I am in the messages app and select to compose a new text message that the cursor now defaults into the chat box (where you type your actual message). This is very annoying and I know that this is not the intended behavior of this.
Please let me know if anyone has experienced similar issues and can provide me with some feedback.

I have not experienced the same.
I have tried restoring and the problem is still present.
You restored from your iPhone's backup, or as a new iPhone or not from your iPhone's backup?
If whatever software problem is causing this is included with your iPhone's backup, restoring from the backup will also restore the problem.
Try restoring as a new iPhone or not from your iPhone's backup to see if this makes any difference. If not, more than likely your iPhone has a hardware problem.

Problem with Extensis plug-in with Adobe CS6

I have a Mac running version 10.8.5 OS X and I also have Adobe CS6. I recently update Suitcase Fusion to their newest version (Suitcase Fusion 5) and since then I've been having a lot of problems with CS6. Every time I start the program it gives me the message: "The Extensis plug-in could not locate a running copy of the FMCore application. Auto - activation plug-in functionality will be disabled". I'm not sure how to fix this, so I would appreciate any help!

What does Extensis say?
From where I sit, the error message is telling you that you only updated the plug-in but not the application itself. But only Extensis can clarify that.

Problems with home hub 2

Since Xmas we have experienced problems with our home hub 2. We introduced 2 new mobiles onto the hub and since then have been having real problems with the connection. My blackberry and ipad will no longer connect to the hub, one of the samsung galaxy s3 has interrupted service.
We have a total of 6 devices connected to the hub plus bt vision ! Is this the cause of the problem.
Even when nothing else is connected to the hub the ipad still won't connect although I get a signal and connection through BTFON .
I tried doing a speed test using the link provided by another forum member but got only upload nod download rates which didn't bare any resemblance to those posted and mean nothing to me.
The hub is well over 2 years old so wondering if its time to renew.
I'm not a techi so really need an idiots guide of how to rule out other options. Please help I'm tearing my hair out!

Have you tried a factory reset of the home hub, by pressing in the recessed button?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I recently downloaded and installed Lightroom 5.7.1 problems with Flickr plug-in.

I recently downloaded and installed lightroom 5.7.1 and am having numerous problems with the Flickr plug-in. All Videos uploads creating error messages. Many photo uploads creating error messages. Something about API error. Also, my photo count after is different within the app then it is on Flickr website.

It really isn't clear what you are asking. If you are looking for the profiles for your cameras you would go to the calibration tab in the develop module and click to choose from different profiles. Profiles will only be available for raw files, including DNG files.

IPad 2 (iOS 8.0.2) Problem with Home Sharing TV HD 1080p

hello,
have someone also the problem with Video Home Sharing by iPad2? Wenn TV is HD1080p, Shows" cannot open, unauthorized" only by HD1080P.
Hardware/Software:
iPad2 (iOS 8.0.2), compare iPad mini / iPhone 5c/5s (iOS 8.0.2)
iTunes 11.4, Home Sharing activated and Apple ID authorized
iTunes TV SD
iPad2 ... OK
iPad mini / iPhone 5c/5s ...OK
Apple TV ... OK
iTunues TV HD 1080p
iPad2 ... cannot open, unauthorized
iPad mini / iPhone 5c/5s ...OK
Apple TV ... OK
is that a buy of iOS 8???
best regards

IOS 8.03 no better. No probs with 8 8.01 and 8.02.....now with 8.03 ipad not responding at all. White screen is all I have when "home button" used to start ipad. Unable to power down or soft reboot. Now have crashed ipad!

Problems with home sharing on my iPhone

So my home sharing keeps crashing after it gets to 50% on my iPhone. I choose the computer I want and it just sits there and loads until it hits 50% then it stops and refuses to load anymore. I first thought it was the computer I was connected to. At the time it started I was connected to my dads iMac and thought it was something to do with the apple IDs we were using on that computer. He has a different apple ID then me and I thought it was something to do with the multiple IDs. So I logged out from His sharing and logged in onto mine using my computer. After changing the IDs and restarting both my iPhone and my computer I tried it again. Same exact thing. It loads 50% and stops no matter how long I leave it for. I tried turning off my firewall and logging out of home sharing and logging back in on my iPhone. No joy. So I'm stumped. I have no idea why my phone will not connect with home sharing. Also my dads phone will connect to home sharing. Its just my phone this happens with. And this started to happen about 1 month ago when the new iPhone 5 came out. I'm also sure that it started happening after I installed IOS 6 on my phone.

Personally I think recognition of libraries has always been a bit flaky with both versions of AppleTV.
Sometimes this is down to local network issues, but sometimes, for whatever reason I think communication to say iTunes is available or not between the 2 devices is not always robust, and a restart of itunes, AppleTV, router or all can be required to kick start things.
Some people have lots of issues. I don't see that many but occasionally a library isn't available when I know itunes is running or seen and then can't be accessed.
AC

WRT120N problem with home-plug "TL PA101"

Similar Messages

Maybe you are looking for