Wrt120n unable to access settings page
Hi - I'm desperate for help. Have a PS3 that will connect to my wrt120n if I unplug the modem and router then plug back in after 2 minutes. if I shut off my PS3 or after approx 1 hour, PS3 drops my connection. I'm trying to access my router page online but after entering the default into my browser, the pop up box will not accept any combo of entries to allow me access. I have an SSID name and my router is password protected. It does not connect me when I use any combo of user name or password or the default "admin". Any help would be appreciated.
Since you tried all possible combination of user name and password including the default one. So you need to reset the router.
Steps to reset the router:
Push the reset button on router for 10 seconds, turn off the router wait for 10 seconds and then power it on. Power light should blink when you perform the reset process.
Once you have successfully reset your router, you will need to reconfigure the network settings with all the new wireless settings as well.
Similar Messages
-
I am unable to access settings or passcode locks or even self destruct which is looking quite appealing.
IOS7 update leaves my Ipad2 asking for a passcode which I have never used.
AaarrgghhI was hoping that some bigwig who decided to throw this update into the mix might have figured out what happened.
I started at 0000 , 1234, 3333 ,9999 nothing except this Ipad is disabled.
............ a bit like IOS7! -
I am unable to turn off/on - Message "iCloud Backup unable to access account" unable to access settings. Totally locked up. Please help
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
Unable to access site page in sharepoint2010
Hi,
I am unable to access the site page with read permissions,while accessing i am getting the following error. for this i am not get any proper log information.Please guide me on this.(Note:we can able to logon witth the same page with contribute permissions)
Thanks in advance.You need to check the logs for details. You can do the following, you will need SharePoint admin access for this
If a correlation id is available, merge the logs from all servers using the following command:
Merge-SPLogFile-Path"<Path\error_ProblemId.log"-Correlation"correlationID"
If the correlation Id is not available in the log, then enable verbose log, follow the following commands to enable and then disable the verbose log. Caution: Verbose log can consume lots of storage space, so reproduce
the issue and turn it off immediately.
Set-SPLogLevel -TraceSeverity verbose
New-SPLogFile
Reproduce the issue, and then immediately run the below commands:
Clear-SPLogLevel
New-SPLogFile
Regards, Mahesh -
WRT54G unable to access random pages
i have the WRT54G ver 5.1 and just upgraded the firmware from 1.00.6 to 1.01.1. some time after the update, i cannot access some pages - browser instantly shows the "page cannot be found" message and ping request instantly suggests to check the entered url, as if the router woun't even forward the requests and just drops them. then again, maybe 15 minutes later, i can access the same pages perfectly fine, yet some other pages stop working. sometimes DHCP RELEASE/RENEW helps, but also for a short period of time, then the router starts acting erratically again. i'm clueless.
mihkelMessage Edited by mihkeltt on 12-26-200606:24 PMHi……
After upgrading the Firmware you need to reset the router by holding and pressing the reset in the back panel of the router for 30seconds. Then reconfigure the router.
Then check your internet connection through the router.
If the connection drops again then connect one your pc to the router and log into the setup page of the router http://192.168.1.1 username leave blank and the password is admin. On the setup screen lower the MTU to 1396 and then power cycle the whole network [unplug the power to the router and the modem and plug them back in] -
Unable to access web pages by typing in the IP address in the address bar?
I hooked up a HP 7520. HP was walking me through some set up options and they asked me to type in the IP address 10.0.1.3 into the addrss bar to bring up the web page. Page remains blank or I get the Safari can't connect to the server. HP stated it was an issue with the setting on the Airport Express. What should the setting be in order for the IP address to load?
10.0.1.3 is a local network IP address. I am assuming that is the IP address of your HP 7520. Since this is a local address there is no additional settings on the AirPort Express that you can make.
I am assuming that you have your Express in its default mode. That is, it is acting as in wireless router and that it is connected directly to your Internet modem ... correct?
If so, your Express will hand out local IP addresses in the 10.0.1.2 to 10.0.1.200 range. Note that this is a dynamic address. The provided IP addresses may change over time which is what I think has happened in your case. By that I mean, you HP received a new IP address and why you can find it in the web browser at 10.0.1.3.
What I would recommend that you do is assign a "static" local IP address to the HP. You can do this using the AirPort Utility. Specifically, you want to set up a DHCP Reservation for this device.
To do so:
Run the AirPort Utility.
Select the AirPort Express, and then, select Edit.
Select the Network tab.
Under DHCP Reservations, click on the plus button.
For Description, enter: HP 7520 or anything else you like.
Reserve Address By: MAC Address
MAC Address: Enter the MAC Address of the HP. This would either be the HP's Ethernet or wireless address whichever is appropriate on how you have it connected to the network.
IPv4 Address: Choose an IP address between 10.0.1.2 & 10.0.1.200. This will be the IP address that you will reserve for the HP.
Select Save.
Select Update and allow the Express to restart. -
Unable to Access Settings Screen - Contacts Lost
I have an iPhone 5c 16GB. I updated to iOS 8.0.1 last week and there didn't seem to be any issues. My iPhone is backed up via iCloud on a daily basis through wifi in my apartment. This morning I woke up and saw that my contacts on my iPhone were all gone. I went into the settings screen because I wanted to make sure iCloud had backed them up. When I got into the iCloud screen I saw that contacts, notes, calendar etc. were now off, i.e. iCloud was not backing them up. The settings screen then went blank and I was back at the home screen. I turned off the power and restarted my phone and clicked on settings. The settings screen came on for one second and then defaulted back to the home screen. I could not access any of the settings. I logged into iCloud on my computer and saw that contacts were backed up from my address book but some of my notes were gone. The calendar was fine, though. There were none of my apps in my iCloud account.
I couldn't get a Genius Bar appt anywhere today so I went into the AT&T store. They played around with the phone but had no idea what happened. They suggested I take it to the Apple store. I was going to upgrade to the iPhone 6 next month anyways so I figured I would do that today. AT&T didn't have any iPhone 6 16GB in stock so I was told to come back during the week. They suggested I plug in my current iPhone into iTunes and sync it to see if I could get back the contacts. When I did that I was instructed to download iOS 8.0.2. I downloaded and installed it. I still had the same problem, though...the settings screen would not remain open. I created a vcard and PDF backup of my contacts (via web-version of iCloud) but some important notes from notepad were no longer there. They're not in iCloud and not on my iPad. I'm thinking that my iPhone is still backing up via iCloud but since contacts, notes, calendar, etc. were unchecked (how they got unchecked I have no idea), the backups are basically of nothing. When I get the iPhone 6 and want to set it up using my iCloud account I'm wondering if any of my contacts, apps, calendar, notes, etc. will be restored. Have I lost this information forever?
Any suggestions would be appreciated. Thank you.It sounds like something is corrupted.
Just as a test, there's a way to open the settings wizard from the command line. For instance, this command would open XP Mode's settings from the default location:
vpcsettings.exe “C:\Users\[USERID]\AppData\Local\Microsoft\Windows Virtual PC\Virtual Machines\Windows XP Mode.vmc"
(replacing USERID with the correct user ID)
If that works, there is a way to reset the mappings.
Bob Comer -
WRT54G v5-Unable to access settings
Hey Y'all. New guy here. My router quit on me. Power light is blinking and all Ethernet lights are lit even if nothing is plugged into the ports. Internet light is also lit. From my reading it appear that the router needs a firmware upgrade. I downloaded the proper bin file for my router and saved it to my desktop. Problem is the router will not let me into the settings area. 192.168.1.1 sends me to a search engine page or an error page. Any help would be appreciated. TIA Jake
If your power light is blinking its a good chance its dead. There is a fix but I dont advise it because you can definately destroy the router. How old is it? Can you return it to the store? If you dont care just send me a PM and I will tell you what it is. But I would call Linksys RMA department and tell them whats going on and have them replace it with a new one. No need to go crazy trying to figure out whats wrong in the sametime it takes to get a new one.
-
Can anyone help me pair my BT keyboard with my password protected Mac Mini? I am currently unable to log in to Mac Mini since the BT keyboard has become unpaired. The wireless mouse is working. I also have an I Pad and an I Phone as well as Mac TV.
Please help!!
Thank you.
GailI had exactly the same issue, that the Apple wireless keyboard became unpaired, and I couldn't get past the password-protected log-in screen, because I didn't have a wired keyboard laying around.
OK folks,
Discovered by trial and error that it was the wireless mouse (not an Apple brand) that was preventing the keyboard from pairing, even though it's not a bluetooth mouse...
Here's the steps I used...
1. Disconnected the USB mouse cord from the Mac Mini.
2. Turned off the Apple wireless keyboard from switch on the back.
3. Turn Mac Mini off, then back on.
4. Waited for it to boot up as far as the password-protected screen.
5. Turned on the Apple wireless keyboard, waited for it to stop blinking, indicating (hoping) that it paired up.
6. And voila... was able to then type in the password...
7. Then plugged the non-Apple wireless mouse sensor cord back into the Mac Mini's USB port
I also immediately went in to the MacMini's Sharing options and set that up for remote management in case something else happens down the road for other problems...
Thanks though to all who suggested solutions... they may come in handy in the future.
Hope this helps someone else...
Lynda -
when I visit 3 insurance company web sites looking for job opportunities, trying to access their position posting. I am unable to access these pages 95% of the time. I can move all around the site access all their different areas within the site except the position posting
when I visit 3 insurance company web sites looking for job opportunities, trying to access their position posting. I am unable to access these pages 95% of the time. I can move all around the site access all their different areas within the site except the position posting
-
I am curently unable to access facebook or google blogger with firefox.
I can currently unable to access blogger (page blank ), facebook (page is disordered) and my gmail account (won't load) on firefox, but can on Chrome. This problem emerged suddenly; I could access these pages fine until a couple of days ago.
hello, try to [[Clear the cache - Delete temporary Internet files to fix common website issues|clear the cache]] & [[Delete cookies to remove the information websites have stored on your computer|cookies from google.com/facebook.com]] and reload the pages. if this doesn't solve the issue, also go through the steps covered in [[Websites look wrong or appear differently than they should]]...
-
We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal -
I need to revert the security settings back to the way they were BEFORE the update because now I am unable to access my secured work website (that I was on yesterday) to actually do work. When I attempt to go to my log-in page I get the following message:
Secure Connection Failed
The connection to corect.ct.gov:10000 was interrupted while the page was loading.
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
It doesn't even give me the option to allow the site (it is my computer after all, it should be my choice). I NEED TO GET TO THIS WEBSITE.The website may try to fallback to TLS 1.0 in a way that is no longer allowed in current releases or may be using a deprecated cipher suite.
You can open the <b>about:config</b> page via the location/address bar and use its search bar to locate this pref:
*security.tls.insecure_fallback_hosts
You can double-click the line to modify the pref and add the domain (corect.ct.gov) to this pref.
If there are already websites (domains) in this list then add a comma and the new domain (no spaces).
You should only see domains separated by a comma in the value column.
*https://developer.mozilla.org/en-US/Firefox/Releases/36/Site_Compatibility#Security
*https://developer.mozilla.org/en-US/Firefox/Releases/37/Site_Compatibility#Security -
Unable to Access Router Admin Page
So I have a weird situation where my router is working fine to allow me access to the internet, yet I am unable to access the router administration page, 192.168.1.1 This occurred after the router froze up tuesday. I reset the router to factory defaults and have since been able to get online, but not access admin page. Router is a Linksys WRT-54GS V 7
Modem is motorolla SB1505
ISP is earthlink, but in NYC so its actually off the Road Runner network. Cable connection obviously. - I attempted to access 192.168.1.1 with both Mozilla Firefox and IE 8. FIrefox gives an "Unable to connect" error message. IE 8 redirects me to search engine results (yahoo in this case).
-Ipconfig confirms default gateway and DHCP server is 192.168.1.1, subnet mask 255.255.255.0
- I am able to ping the router with <1ms times.
- I have tried resetting router to defaults again, but same issue occurs.
- I am able to get online and access web pages, etc.
- Tried resetting up the router using the Linksys setup program, but it error every time saying "please connect router for broadband"
- Router worked fine with me able to access admin page until it froze up yesterday.
- Wireless works fine. Though the network is unsecure atm, since I can't access router admin.
- I've also tried disconnecting all other devices from the router except my computer and modem. Still wont let me access router. System is running windows 7 PRO, fully updated. However, I can't access the router either on 2 other computers at home which run windows XP PRO SP3. System Specs CPU: Intel i5 running at stock speeds
Mobo: Gigabyte P55-UD4P
Ram: Gskill Ripjaw, 4 gb DDR3-1600 7-7-7-21
HD: Intel X-25 M 80 gb G2.
PSU: Corsair CMPSU 750 TX
GPU: Diamond ATI 5850 Anyone have any ideas on whats wrong here? Did i miss something obvious? Would greatly appreciate any help as having an unsecure wireless network in the middle of NY isn't the best idea. Thanks!
Message Edited by Banthracis on 11-06-2009 04:25 PMI am once again unable to access the on-line Router admin page. When I use the EasyLink Advisor and click ADVANCED settings it pulls up the browser but goes nowhere. If I type in the address directly it does the same thing. The address I'm typing is correct. I know because if I unplug the router for a minute, I can get on using the EasyLink or entering the address directly into the browser. Then I sign in and can access the pages.
Why do I have to keep resetting the router to access the router admin pages? It doesnt matter about virus protection, firewall, what version of Windows I'm using, what browser I'm using...the only thing that matters is resetting the router.
And now I have a new problem. When I attempt to go online with my new netbook, it causes my wired-to-the-router desktop to loose the connection, even though I reset the router and "added it as a new device".
I was using Homegroup to access the netbook the first day I got it. Now I cannot access the netbook or the network from the netbook, without resetting the stupid router every single time. I am not using mac address filtering and have the router set to allow 9.
Getting fed up with this router and I never get an answer from Linksys as to why I can never access the router admin pages without resetting the stupid router.
I can get the netbook on other people's wireless networks (using their password) but cannot get onto my OWN using my password.
Does anyone have any ideas? I'll try anything before yanking this thing out and buying a different brand of router. Yeah I'm mad, sorry.
Wired desktop Windows 7 Home Premium 64/IE8/using Windows firewall and MS Security Essentials. Netbook is W7 Starter, Norton Internet Security 2010. But none of this matters. Because I had the same problem with this router using Vista64, IE7, no firewall, no a/v, IE32 & 64 bit...all those variables yet the only thing that works is resetting the router.
SO WHAT DOES MATTER? Help me before I trash this thing please.
mlure -
Unable to access SOA suite start page from remote browser.
I have Oracle SOA Suite 10.1.3 and Oracle 10g AS 10.1.2 installed on a Windows 2000 machine.
I am able to access the default start page of the 10.1.2 AS from the local and remote machine using the following URLs
Http:\\hostname:7777\
Http:\\hostname:80\
Also, I am unable to access the SOA Suite 10.1.3 start page, bpel console etc - from the host machine using Http:\\hostname:8888\
However from a remote machine browser I am not able to connect to the start page of SOA suite only. Http:\\hostname:8888\.
Is there some settings which allow only local host access to the SOA suite pages?.
All the hosts are on the same intranet, there is no firewall. Also i have Msft loopback adapter installed on the server host machine.
Appreciate all suggestions.
ThanksI suppose you're using DHCP and hope you have followed the steps in the Installation Guide. With DHCP it is always a bit tricky to access the server. You should check your /WINNT/system32/drivers/etc/hosts file. If the hostname you're using during install is not in it then adding it will help.
--olaf
Maybe you are looking for
-
Service desk message view from ECC
Hi I have following queries regarding service desk in solution manager. 1. Do user need to login into solution manager to see his message status or can he directly see it from ECC. 2. When a message is created through satellite system support message
-
Can someone tell me what is backed up in the DRS recovery for CUIC? Are: 1 Custom Reports 2 changes to stock reports? 3. Report Definitions? 4 Value Lists 5 Partner created custom reports? 6 Data Sources? 7 All Passwords? 8 Schedules? 9 Dashboards? a
-
I have a Satellite M305-S4835 with Vista Home premium 64-Bit. The control panel stopped working suddenly, the lights don´t work anymore either. I press the buttons and nothing happens. Can anyone help me? I´ve tried to uninstall and re install the To
-
I have Creative suite design premium 3 and upgrade disks to 4. I want to sell them, can I sell them separately or are they tied together? Can the license be transfered? I no longer use the software or have it on a machine.
-
Hello: I get a SerialVersionUID mismatch, during argument unmarshalling for the called EJB method, if my test code is run outside the weblogic server JVM. If the test code is run within the weblogic JVM (as a servlet), it works fine. java.rmi.Unmarsh