WRT150N and Mac Leopard compatibility? correction

I apologize for getting my cats mixed up. I have Mac OS 10.5.1 leopard not panther. My new iMac has a DHCP address assigned and I cannot get connected to the set up web site. I just continually get timed out because it is not recognized. I have ethernet connected to device and computer per instructions. At least I believe so. any more I don't know what to believe. Does anyone know how to permanently re set the IP address on the computer? I can't re set it for the linksys if I wanted to since I have no access. Or is there some simple solution I am too dense to know? Oh and I can access the address just fine on my old Mac with Tiger OS

Are you getting a valid IP address from router like 192.168.1.100 , are you able to ping 192.168.1.1 ? Try hard resetting router for 30 seconds.

Similar Messages

Photoshop CS3 with Epson Stylus Photo 1400 and Mac Leopard

I have Adobe Photoshop CS3 and an Epson Stylus PHOTO 1400 printer and Mac OS X 10.5.4.
When I print a photo it comes out with excessive ink which smears very easily and has lines in it. It only does it in Photoshop. When I print from any other program it comes out fine. I've seen reviews online where people have printed from Macs and photoshop onto the printer and it worked. I've already contacted Epson, but they said to contact Adobe. Does anybody have any advice?

Forget Epson's useless tech support.
What you describe is typical of improper printer profile or usage of non-Epson paper, especially paper with gloss. Have you profiled the printer/paper and are you using Epson paper (or other paper and profiles specifically recommended here for Epson photo-quality printers) properly selected?
Like Ramón I am on 10.4.11, not 10.5.x, but I doubt if your described problem is due to the OS version.

Palm OS and Mac Leopard Question

Hi, I am using a Palm Treo 755p (Sprint). It is currently connected to a Mac running OS 10.4.11 (with issues in syncing, I might add....mostly duplicates appear/secondary addresses 'gone') with Palm Desktop 4.2.1 software, connected for HotSync via USB.
I just got a new Mac running Leopard 10.5.6 and before I install any Palm Software, I want to make sure that Palm Desktop 4.2.1 is the most recent/correct version, and that it WILL work and not mess up a clean, new computer installation.
So...is the Palm Desktop software compatible with Leopard? Are there any compatibility issues?????
Thanks....and anxiously awaiting the Pre and NEW software! Yeah.
Post relates to: Treo 755p (Sprint)

Yes, Palm Desktop 4.2.1 is compatible with Mac OS 10.5.6 and I have two computers running on it without problems
Post relates to: Palm m105

Image Capture, twain sane interface, and Snow Leopard compatibility?

I have downloaded and installed Mattius Ellert's twain sane interface in order to be able to use an old scanner. In order to use it with Image Capture, Ellert's FAQ page describes a procedure for selecting the twain sane interface GUI over the native GUI. However this procedure fails in Snow Leopard; I seem to have no choice but to run the native GUI, with extremely limited functionality. The twain sane interface GUI is still there and still works; it is what comes up if I scan from Microsoft Word or Graphic Convertor. But I would like it to work with Image Capture and related Apple software (preview and the print/fax control panel). Does anyone know of a procedure to do so?
Also does anyone know where this GUI actually lives on the computer? I examined the installed file locations specified in twain-sane interface's bom file, and just found a bunch of .strings and plist files in Image Capture/TWAIN Data Source/Sane.ds/Contents/Resources, plus one file under ....Sne.ds/Contents/MacOS called SANE.

Ronald,
The reason you are not seeing this device in Image Capture after installing the TWAIN/SANE stuff is because Apple removed the TWAIN interfaces from Image Capture in Snow Leopard. TWAIN is being deprecated on the Mac. What someone needs to do is develop an ICA/SANE bridge and then Image Capture would work again.
Just trying to help.
Andrew

External hard drives and mac/windows compatibility - Need Help pls

I have an external Harddiskdrive with 200 GB formatted in HFS+ with my Mac.
And here's my Problem:
A friend of me would have some of the MP3's on this HDD, but he is a PC user with Windows XP. So he could not see the drive in his Workspace.
Is there a way without buy MacDrive or something like that?
Or is there a App like MacDrive as Freeware or OpenSource???
What is with the "DOS" - format (FAT32)? Can I use this without an afraid of losing my Data on this Drive???

"am getting this error message on my Mac:
SMART status not supported"
This is not an error. SMART status reports of hard drives are not passed through the chipsets of external enclosures.
"What is this FAT program and how do I make it work? "
FAT is not a program. IT's the format in which the drive is fomatted.
In the future, please start a new question about your issues, so as to not "thread-jack" and existing discussion. YOu'll recieve more repsonses if do so as well, rather than burying your question deep inside someone elses topic/issues.

IPhone 5 and Mac OS compatibility

I'm thinking of switching from Android to the new iPhone 5 since I'm all Mac at home.
My Mac is running on 10.5.8. What benefits or problem might I expect?
Will my iCal (3.0.8), iTunes (10.6.3), Address Book (4.1.2), etc. sync correctly?
Appreciate any advise, haven't posted for a while.

An iPhone 5 will not sync with your Mac. You would need 10.6.8 & iTunes 10.7.

Cinema HD Display and Mac Mini compatibility?

I have an older 23" Cinema HD display and am trying to determine if it is compatible with a new Mac Mini. The only thing that looks like a Ser No is on the base: 2A6402H0G0. Is this the SN? And is it compatible? TIA

Is it this one? Then it has an ADC port and connector, and it's unlikely to work as several other threads here suggest.

DW CS3 for Vista and Mac OS compatibility

Hi
I use Dreamweaver CS3 on Windows Vista. I also have a Mac OS
laptop. I am thinking of Running the MAc version of Dreamweaver on
the Laptop. Would the files between the two systems be
interchangeable.
In other words, if I created a site on the Vista machine
would I be able to edit it on the Mac and vise versa.
Thanks

HTML is HTML. There is no platform specificity in it. You
should have no
problem. I routinely work in the same site on the same files
on either Mac
or PC.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"carlosalt" <[email protected]> wrote in
message
news:gjt7i4$m2t$[email protected]..
> Really :)
>
> So sites I created in Vista I can just load up in the
MAc version edit
> then save for reopening in Vista ?
>
> Or is it an export / import function

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

Info regarding Diswarrior 4 and Leopard compatibility

I emailed Alsoft regarding Diskwarrior 4 and Leopard compatibility. Here is the response I got.
+DiskWarrior 4.0 will successfully rebuild a disk that has Mac OS X 10.5+
+Leopard installed or a disk that has been attached to a computer running+
Leopard.
+However, some operating system functionality has changed within Leopard+
+itself. As such, there are some compatibility issues when running an+
+installed copy of DiskWarrior 4.0 while started up from Mac OS X 10.5+
+Leopard. Alsoft currently recommends that you do not run DiskWarrior 4.0+
+while the computer is started from Mac OS X 10.5 Leopard.+
+Instead, to run DiskWarrior, you should start up the computer from either:+
+1) A DiskWarrior 4.0 CD.+
+2) Any disk that starts up in 10.4.x and then run DiskWarrior 4.0.+
+An updated version of DiskWarrior that has complete Leopard+
+compatibility will be released soon as a free download for existing+
+owners of DiskWarrior 4.0.+
+-- What you can expect when running DiskWarrior 4.0 under Mac OS X+
+10.4.x and rebuilding a Leopard disk.+
+All features work as expected with one exception: FileVaults created+
+while started from Leopard are not visible to DiskWarrior 4.0 and cannot+
+be rebuilt (repaired).+
+-- What you can expect when running DiskWarrior 4.0 under Mac OS X 10.5+
+and rebuilding a Leopard disk.+
+While not recommended (and discouraged), if you do run DiskWarrior 4.0+
+while started from Mac OS X 10.5 you might encounter some problems such as:+
+1) There is a lengthy delay whenever DiskWarrior is determining which+
+drives are currently attached. This delay is dependent upon the number+
+of attached drives and may last up to 2 or 3 minutes. You will+
+experience this delay when first starting DiskWarrior, whenever a disk+
+is attached or detached while DiskWarrior is running but idle, and+
+whenever a rebuild is completed or canceled.+
+2) You cannot rebuild FileVaults or disk images.+
+3) In step 9 (comparing directories) of a rebuild, the progress bar+
+might get to 100% even though the comparison step is not finished.+
+4) When performing Check All Files and Folders the progress bar might+
+get to 100% even though the check is not finished.+
+5) After rebuilding a disk, DiskWarrior may report that some files or+
+folders have had their permissions changed. This is inaccurate and the+
+permissions have not been changed.+
+To repeat, an updated version of DiskWarrior that has complete Leopard+
+compatibility will be released soon as a free download for existing+
+owners of DiskWarrior 4.0.+
+-- What about DiskWarrior 3?+
+DiskWarrior 3 and earlier versions are not compatible with Mac OS X 10.5+
+(Leopard). Alsoft does not recommend running DiskWarrior 3 or earlier on+
+a disk that has Mac OS X 10.5 Leopard installed or a disk that has been+
+attached to a computer running Leopard.+
+-- Marc+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Marc Moorash, Alsoft Technical Support+
+Email: [email protected]+
So, it seems it will work but you need to run it from the disk or if you have it installed on a external drive running Tiger, it will work.
Thom

If you open your Tiger Address Book, select all cards, drag them to the desktop, it will make one big "mega-VCF" card with a name like "Alan Adams and 543 others.vcf" Dump that to a flash drive or email it to yourself, then doubleclick on it on the Leopard machine. They will all import just fine into your Leopard Address Book.
Try doing something similar with your iCal data, Open the application, choose your calendars one at a time, and select File > Export. That should make a big "mega-ics" calendar card with a name like "work.ics" or "home.ics, i.e., "originalcalendarname.ics" with all the events of that calendar. Then same drill: dump that to a flash drive or email it to yourself, then doubleclick on it on the Leopard machine.
Both generation methods create text files, which should import just fine into the Leopard applications.

I have a desktop Mac OS X Leopard. I want to upgrade to Quicken 2007, Install Snow Leopard and download iLife '11. I heard that Quicken and Snow Leopard can clash and have problems. What would be the best order for installing these products. Thank You.

I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.

First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
      update unless you will boot from this drive and install the update on it.
      Reconnect it and turn it back on after installation is complete and you've
      restarted.
2. You may experience unexpected results if you have installed third-party system
       software modifications, or if you have modified the operating system through
       other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
      interruption occurs during installation, use the standalone installer (see below)
      from Apple Downloads to update. While the installation is in progress do not use
      the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
      6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1.

I have a Mac leopard. Did a recent recommended update. When it finished,I restarted then a window came up to enter Master Password. I don't know what it is and when I try to enter one, the window shakes and I am unable to use computer at all

I have a Mac leopard. Did a recent recommended update. When it finished,I restarted then a window came up to enter Master Password. I don't know what it is and when I try to enter one, the window shakes so I am unable to use computer at all.

Please confirm exactly what Mac this is, and what 'recent update' you installed.

IPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Dual boot drive - Mountain Lion and Snow Leopard - Correct order to load software /apps?

Hi
I want to create a dual boot drive for Mountain Lion and Snow Leopard as some of my hardware (is not supported in Mountain Lion).
I am happy how to do this, I just want to know if there is a correct way to install software and apps.
My plan was to do a clean install of both using two partitions, the larger going to ML and smaller one for SL. I was going to install SL from the DVD and then after updating from 10.6. to 10.6.8 and download ML from the app store and install on the larger partition.
Do I install all the software I use like Final Cut, Aperture, iLife (for Garageband) etc on the ML or SL partition or on both. Also, is there a better way / practise of the order software updates / apps and boxed software should be installed when doing a clean machine install.
Thanks in advance.
Matt

Thanks mende1
So, if I have software I need to use on both ML and SL - for example Final Cut as I have a Canopus AVDC box which is not supported in ML but only SL, do I need to install the same software in both OS?
I usually open apps using spotlight and didn't know if it would software / apps would open if already installed on the other partition?
Thanks again
Matt

It appears that I can not share documents between my iMacs and mac air without first opening document in an IOS device. Is this correct? If so then iCloud for me is a giant step backward especially since idisk will be discontinued next year.

It appears that I cannot share documents between my iMacs and and Mac air using icloud without first opening document in and IOS device. Is this true. If so, then icould is petty much worthless for me, especially since idisk will be discontinued next year.

jack198 wrote:
You are correct. However, a document can not be opened by another computer unless the document has first been open by an iDevice.
iwork on iOS uses different file formats ( *.tef ) then iwork09 on Mac ( *.key , *. number , *.page ).
Uploaded documents to icloud.com must first be updated to the *.tef format and then re-written to the cloud system. The online service behind the iwork web-app does the re-conversion to Mac formats, pdf or Microsoft office. All that is happening "in the cloud", not on your Mac as he misses the engine to do the transcoding from the *.tef to the other formats. Mac simply does not know what *.tef is.

WRT150N and Mac Leopard compatibility? correction

Similar Messages

Maybe you are looking for