WRT150N connects to Wii but doesn't accept a Wii update.
I've updated my WRT150N to the latest firmaware (1.51.3) and the router connects fine to my PC via hardwire. My router is also seen by other wireless devices (laptop, Archos) the Wii even detects it and the Wii internet test passes.
But the problem I have is when I attempt to update the Wii the download will stop after a few minutes. Troubleshooting on the Nintendo site says to change to chanel 1 or 11 to improve the connection, but still it doesn't work.
Does anybody have the same problem? Even better does anybody have a solution?!
Try changing the wireless settings on the router such as ........
Radio Band 40MHz
Wide Channel 6
Standard channel 11
See if the WII is now upgrading ........
Similar Messages
-
Apple password not working in iCloud since I updates my email address. Still lists my old email but doesn't accept old password. How do I access the cloud?
To change the iCloud ID ("email") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
AE - Layer that casts shadow but doesn't accept light?
Hello there,
First of all, I'm using the AE CS4 (due to the 32-bit version) and I have a little problem there:
Please check this image below:
As you can see, I have some rectangle and there's shadow in the back beneath it. What I wanna do, is that I want to create this rectangle and have SHADOW APPLIED on it but I DON'T want the solid to be affected by the light (as you can see, there's an ugly gradient caused by light).
I tried to enable the "accept shadows" and disable the "accept lights" option but that doesn't work since the layer doesn't accept lights it doesn't accept shadows, either. Any ideas?
Thanks.You just didn't try the right box. If I understand your request you simply set the white solid to Accepts Shadows only with all other material options set to their default settings. Here's what it looks like:
I pressed the U key twice to reveal all settings that have been changed from the defaults. -
I just bought an ipad mini with retina display. On my settings page it shows an update occurring for ios.7.0.4 with the message "Estimating time remaining..."
This update and message appeared last evening but doesn't seem to complete. It also says "downloading", but nothing is happening.
How can I complete the download or eliminate it?If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. -
Please give me simple directions to reset a password to m wifi choice...since I downloaded the new updates for IOS7, yesterday! My ipad was frozen, had to go to Itunes to restore it, after it was restored, I went to go on my wifi .....and it won't accept my password...nor will it allow me to make up a new psassword....now what do I do??
The correct password is printed on the route's label.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I´ve been sent here by the Adobe Support but haven´t found a matching problem yet.
It´s a minor problem (the same Serial Number has been accepted in the course of the first installation), but seeking help took me several hours already.
OldrichI´ve been following the same installation procedure as for the first time. There is just one DVD in the set with all the installation files. The only change is the "Invalid Serial Number" message in the very end. Then, a windows appears which announces that "the trial period" continues -- as if I had downloaded the program from some website.
-
Printer is connected to network but doesn't show up in Bonjour since a power outage.
Our friends have an HP printer connected wirelessly to an AirPort. They were able to print with no problem until they unplugged it during an electrical storm. Since then, their Windows laptop has been unable to find the printer in the Bonjour list. We tried restarting both the printer and the computer, but no luck.
ok so i got a ipod nano for xmas...and i have
had so many different things go wrong its not even
funny! so here's my question...when i connect
my ipod to my computer it charges just fine..but when
i have itunes open...is it not supposed to show up
under a device list, so u can sync the songs
to your ipod??? well my ipod is not showing up in the
device list...how do i get it to show
up? its registered, and i have unplugged and
replugged in the usb cable!!! HELP ME!!! it
worked before but now its not showing
up!!!
ipod nano
Windows XP
gateway Windows XP
Holy freakin crap the new nano i got was working absolutely perfectly and then one day it decides to stop freakin showin up in my cpu, i looked under hardware and everything, mine charges and i wanna know if a new cable really would help because i just restored my ipod by mistake then i went to put songs on it and it worked but it got more songs and i can't put them on and im mad now and i cant tell my parents theyll flip.... HELLP ME ! -
My IPod will find the network but doesn't accept the password even though it is right.
I have tried many methods like airplane mode, restart device, restart network setting, restart router and turn on and off. I am getting tiered of it now because my mums I phone and my iPad will all connect but my IPod just refuses to join.
Any ideas?
Please help!!!Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Siri asks for contact choice but doesn't accept any answer
When I dictate an email I begin by saying "send email to" and I say the name.
If there is more than one contact meeting the criteria SIri will display multiple names and say for example, "you have 2 contacts named xxxxxx, which one should I use?" And then she beeps for a response.
I say one of the names.
But Siri does not accept any answer and keeps re-asking and re-beeping for a response.
I have to manually touch a selection for the process to continue.
If this is a bug, how do I report it?
EdThelgord, iPauer,
first of all, thank you for you're answers. But nothing you've mentioned worked for me.
I've changed "My Info" to someone else and back again. I have no linked contacts, no duplicates, no middle initials or something else. I just have contacts in the contact app, saved at/in iCloud.
I've determined, of which I dont't know if it'll help me on at the moment, that it works when I'm deactivating iCloud contacts (Settings->iCloud->Contacts). I choose "delete" when iPhone asks what I would like to do with previously synced iCloud Contacts and all contacts are gone. I then create a new contact for my wife/brother/etc. and a new contact for myself (put it into 'My Info' in Settings) with all relations in it. Now Siri works as I expected.
For me, it seems to be somehow related to iCloud sync of contacts, that Siri is not working properly. -
I have recently gotten a MacBook Pro (through my highschool so it is monitored by them) and ever since I brought it home it's been having wifi connection problems. It says the wifi is working fine, it shows full bars, but when I try to connect to the Internet it acts like there is only one bar or no bars. Although every one and a while I can get a great connection but it lasts for about 10 minutes. This I do not get because the wifi works perfectly fine for everyone else in the house and for our phones too. So if anyone else could help me I would be soo happy. Thanks.
I have had the same issue and searched the forums and found nothing that helped. I contacted apple support and this is what they told me to do:
First we’ll do the SMC reset
1.) Shut down the Mac and connect to power source.
2.) Unplug external devices, flash drives, external monitors, external HD (Keep the Mac plugged into power source)
3.) Hold down “Shift” + “Control” + “Option” (On the left side of the keyboard) + Power key for 30 seconds.
*The Mac should remain powered off during the reset, the LED on the MagSafe Adapter may change colors.
**The “Option” key is also known as the “Alt” key on some Macs.
Awesome, now let’s reset the NVRAM
1.) Locate these keys “Command”, “Option, “P” & “R”
2.) Power on your Mac
3.) Immediately press and hold all 4 keys “Command” “Option” “P” “R”
4.) Listen for 2 boot chimes and then release.
**The “Option” key is also known as the “Alt” key on some Macs.
Posting this here in the hopes that it will help someone else still searching for an answer. -
Airport Extreme connected drive works but doesn't appear on Aiport Utility
I have a seagate back up plus connected via USB to my Airport Extreme. Time Machine works fine from my Mac Book over wifi. I can also open finder and add files over my wifi network and then access them from my PC on the same network. The only problem is the drive doesn't show up on Airport utility. How do I get it to show up there and then can I access remote when not on my network?
resolved
-
Also, I know there is service at my house (it's not the location) because my mom has the same phone and hers works just fine. Did I maybe turn it on too soon? And if so, how can I fix this problem? DESPERATE.
it seems like it hasn't registered with your carrier yet? try a hard reset, LOCK+home button until it shuts down and restarts, see if that helps any, please post back
-
My iPod opens my apps, but doesn't load them or update them. Help!
So basically, let's take Snapchat as an example. I have WiFi. It opens. But then says that I have no internet connection or whatever so it cant update. YouTube however, doesn't load at all. As for my other apps, they open but don't load. Also when I take a picture I see it in the lower left corner but if I tap it all I see is a picture I took a while ago. I'm not sure what to do, and am really scared..could someone help?
Thank you in advance,
DariyaFor wifi problem:
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
For other problems
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
New Vault - but doesn't seem to be updating
Many thanks in advance for your attention.
1. Have been having trouble with backups to my Vault, so after trying various things, I deleted it. And tried to start over with a new Vault.
2. Before starting New Vault, I ran Aperture Repair Permissions and Aperture Repair Library as a precaution.
3. Setup a new Vault. I deleted old Vault on an External Hard Drive to make room for this new Vault.
4. Aperture Library is about 400GB - about 11, 000 Raw Managed images. Have my Aperture Library all by itself on a separate External Hard Drive. Have Vault on a second External Hard Drive (with 700GB of free space). Use Firewire 800 for connections.
5. Started the backup to Vault so it would run overnight, but next morning, little seemed to have changed.
Progress bar was still on - but seemed to be at about the same point (from 8 hours earlier). The word "Copying", at the bottom of the Aperture window, was still on - as it was 8 hours before.
I can see where it might take longer than overnight, but would also expect some progress.
If anyone knows what I may be doing wrong, let me know.
Or - perhaps, when backing up 400GB of Raw files to a new Vault, it just is going to take a long time (days?)
Macbook Pro 750GB 2.9 Intel Core i7This seems to be new in 10.8.2 From the article I linked to
This issue happens because Apple has implemented some changes to the latest versions of OS X that result in different requirements for the system to determine if it can go to sleep, and one of these is a new dependence on applications to invoke a "power assertion" to keep the system from going to sleep.
Unless a program invokes a power assertion, the system may go to sleep if left idling, even though the program is running.
So perhaps some of the programs you are running that don;t seem to have this problem have been updated to include this. As I said for me Aperture does not do the vaults like it use to.
So when you returned to the system and saw the vault hadn't finished did it continue once you cheked on it? If so I'd say it is this problem. If the vault operation stayed hung even after you got back on the machine then it is possible that you have a different problem.
You can see for certain by either installing the app i linked to Caffeine or doing the steps listed in the article. Not sure if just changing the settings in Energy Saver will keep this from happening.
regards -
I've tried several times to update my Macbook software, but each time it says it will begin the process it restarts, and doesn't do anything. This is really frustrating, because a lot of the programs I want to use require new updates. Please help!
My macbook is right around 2 years old.Model A1286
OS X 10.6.8
I haven't been able to install any updates at all since I first got the Macbook. It hasn't caused much of an issue until now- most websites at this points require updated versions of several plug-ins.
Here's the list that the software update gives:
Safari ver 5.1.7
Macbook Pro SMC Firmware Update 1.7
Apple Software Installer Update 1.0
Thunderbolt Firmware Update 1.0
Java for Mac OS X 10.6 Update 12
Remote Desktop Client Update 3.5.3
iPhoto Update 9.2.3
Macbook Pro EFI Firmware Update 2.7
GarageBand Update 6.0.5
iTunes 11.0.1
Security Update 2012-004 1.0
Airport Utility 5.6.1
Maybe you are looking for
-
Create sales order with ref to quotation - usage of line items not copied
hi i have created a quotation for which the first line item(higher level item) is a configurable item for which the value of the field use (vbap-vkaus) is blank and the line items the use field is given as 'HIDE DISCOUNT'. when i created a order wi
-
My settings menue is in chinese language (help)
Whenever i enter my settings menu for the new (webcam live ultra for notebooks) all the words are in japanese or chinese. How can i get these to be displayed in english? thanks' leo kowal
-
How to import catalog and create new link to folder in a new external disk
I lost my data in my laptop. I have a back-up into an external hd. Now I would like to import the catalog and change the link of folder to external disk
-
HT201210 Facetime is not there when i updated my 4s using wifi to ios6,why?
I bought recently 4s and updated the software by going settings,general then update software. Updating takes about two hour after down loading a pop message came out saying there was problem but i just closed it and click Install,my iphone succesfull
-
Field selection in SPRO of Relationship tab in Work Order
Hi, How to make fields visible/invisible of Relationship tab (if there are any other than the visible ones as default). The tab is seen upon clicking of General button in Operations tab of Work Order iw31. Thanks Faisal