Wrt150n issues with xp pro web browser

Finally got wrt150N to work with laptop running Vista and desktop running vista wirelessly, but I can't get desktop running xp pro to work...intermittent connection to the internet, and when it is connected, the browser does not work...please help

if the desktop is wired to the router it should get online automatically, what is your IP address?

Similar Messages

Issues with Flash Pro CS5 on Mac

Hi,
I recently bought a MacBookPro 15", 2.4 GHz Intel Core i5, 4GB 1067 MHz DDR3 and CS5 Creative Suite. Built in Intel HD Graphics and NVIDIA GeForce GT 330M.
Hi have some issues with Flash Pro:
- when objects on the stage are quite big (for example a 800x3000 movie clip), it start showing strange colors and wrong position, however when double clicking the movie clip to edit it, it looks correct. Also no problem when publishing. See images attached, the first one is correct, the second one shows the problem, when editing the mc in the 2nd image i get the third image that is correct.
Correct:
Wrong:
After entering editing mode:
- after a while, when making a change in the stage or in the time line (deleting frames for example), it doesn't show it immediately, but i need to refresh the page. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
- after a while it doesn't show when selecting an object, the object looks like is not selected, however i can see that it is in the properties panel. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
Hi have been using CS3 and CS4 with less powerful computers before (always mac) and i never encountered these issues.
Removing preferences and Application support files didn't help. I also updated Flash to v. 11.0.1, but no joy.
Does anyone know what's the problem?
Thanks a lot.
Mike

Based on some searching and testing, it seems that if you redirect ~/Library/Application Support/Adobe/Flash CS5 to a location on the local hard drive, rather than the network account storage, the problem ceases.
I hope this helps anyone else who may run into this problem.
Take care,
Branden

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

Having issues with Surface Pro 3 downloading boot image over PXE

Hi,
We've recently started to buy the new Surface Pro 3 with the new USB 3.0 Gigabit Ethernet adapter and we have some issues deploying them through SCCM. Basically, with the Pro 2 and Fast Ethernet adapter we have no issue at all, of course the deployment is
a bit longer than on any other computer, but it is still quite faster than the latest Surface.
We have the new 8.13.414.2014 driver injected in the Win 8.1 boot image for the USB 3.0 Gigabit adapter and all the drivers assigned to the new Surface in SCCM.
The problem occurs when we try to load the boot image after choosing PXE, it takes more than an hour to load it when it shouldn't take more than 5 minutes.
I tried rolling back to the old driver (8.6.128.2013) and use the Fast Ethernet adapter, use the Fast Ethernet adapter with the new driver and use the new adapter with the old driver, but it's still slow in any case, so
I'm pretty sure it has something to do with the new Surface and not the Ethernet adapter.
Anyone have an idea what could be the problem here? Anyone having issues with Surface Pro 3 and SCCM 2012?

I would imagine you have upgraded to R2, have you also applied KB2905002.
This hasn't got anything to do with the TFTP loading phase of the boot image.
Similar thread to this can be found here:
http://social.technet.microsoft.com/Forums/en-US/a6d80714-dc26-43db-a071-93eaee267122/surface-pro-2-surface-ethernet-adapter-super-slow-pxe?forum=configmanagergeneral
I already asked in that thread the same question, but how about normal PCs that are connected to the same network segment as the Surface devices, do they boot slow also?

Major Issues with Premiere Pro CC

I am currently having some major issues with Premiere Pro CC running on my macbook pro(specs below).
I am trying to export a 4 minute video using the vimeo 1080p export settings as I usually do, and it takes about 10 hours to export the video. On cs6, a similar project would take 5-10 minutes.
Also, the video that was exported contained a lot of clips that came out choppy and low quality.
I am currently on the phone with tech support, and they cannot seem to figure out what is wrong.
I have seen a few post about CC having issues with amd cards, but nothing has been confirmed yet.
Any help would be greatly appreciated since this job is past due due to these issues.
2011 MacBook Pro
i7 2.2
16GB Ram
256 SSD + 750GB HD
AMD Radeon HD 6750M 1GB

You neglected to specify exactly which release of PPro CC you are running. There have been 5 of them.
If you're on CC7.2 or 7.2.1, then you may be hitting the same problem discussed in one of these threads:
RGB Curves: http://forums.adobe.com/message/5929088?tstart=0#5929088
http://forums.adobe.com/message/5934916?tstart=30#5934916
http://forums.adobe.com/message/5935386?tstart=0#5935386
The first thing to try is switching Renderer to Software Only.

Im having problems with my safari Web browser to opening/viewing pdf files.

Im having problems with my safari Web browser to opening/viewing pdf files. I installed the 8.1.2 version But then when I click to open any PDF it says that Adobe PDF Viewer cannot find a compatible Adobe Acrobat or Adobe Reader to view this PDF. Please select one.
i can see the adobe reader but can not select it .

did you find a solution to this? my safari history is full of
explicit sites that i have not visited. i see a lot of info on how to remove it, but none on how to figure out how they got there.

Photoshop batch production - issues with 'save for web'

Hi,
I'm having an issue with 'save for web' on a batch. I've just spent the last 2 hours searching the web and this forum and although the issue gets touched upon, the threads either suddenly head off in another direction, end, or i just struggle to make sense of the answers given.
I have 350 images that i want to resize to thumbnails and then save for web. 2 hours ago this seemed like a 5 minute job.
I creat an action called 'batch_thumbnail' and press 'Record'.
I then select 'File' > 'Open' and select an image to open using the dialog box.
I then select 'Image' > 'Image Size' and resize the image to the thumbnail size (200 x 125) and press 'OK'.
I then select 'File' > 'Save for Web and Devices', set my optimisation settings and press 'save'.
Using the dialog box that pops up, i navigate to a pre-created directory called 'thumbs' and press 'save'.
I then select 'File' > 'Close' and on the dialog box that pops up i select 'Don't Save'.
I then stop the action from recording.
So far so good.
I then select 'File' > 'Automate' > 'Batch...' and the dialog box appears.
I select my action in the 'Action' drop down menu.
In 'Source' i set the drop down menu to 'Folder', select 'Choose' and select the target directory with my 350 images in.
In 'Destination' i set the drop down menu to 'Folder', select 'Choose' and select the target directory (thumbs), where i wish to save the thumbs.
In 'File Naming' i leave the first box as 'document name', set the second to '_thumb' and have the third as 'extension'.
I then click 'OK'.
And this is where the problem begins. Everything works fine till it trys to save the second image. I can see what's happening, as the directory path and image name that are used whilst setting up the SFW part of the action, are getting hardcoded into the action. So every resulting image is being saved as the same file, instead of being overriden by the settings in 'File Naming'.
I've tried selecting 'Override action 'Save' command', but it doesn't make any difference. Is it actually possible to batch produce files using 'Save for Web and Devices'?
Cheers,
James

I have written a couple of Save For Web batch processors, they may be of use to you?
They can both resize and run an action if required.
CS2-CS3 http://www.ps-scripts.com/bb/viewtopic.php?t=2374
CS4 http://www.ps-scripts.com/bb/viewtopic.php?t=2276 (This handles metadata)

Graphics Card issues with Premiere Pro CS4

Hey there,
I've placed the screenshot of my problem at the bottom of this post.
I'm having lots of issues with premiere pro CS4 and editing videos since I upgraded to Windows 7. I have some .mpg and .MP4 videos. Both of which play fine in WMP, VLC, WinAmp, VirtualDJ etc. But when I load them into PPRO CS4, as you can see in the screenshot they go green and pink. And they don't move. I.e you see one still image and hear only audio.
Now a fix I have found for this is to uninstall my graphics card. But this is no way an option to edit videos, as the resoultion goes from 1920 x 1080 to 1024 x 768.
I should add that I am runnig the following system:
Dell Vostro 1000 Latpop
Windows 7 Ultimate 32Bit
2.00Ghz AMD Sempron Processor
2GB RAM
ATI Radeon XPress 1150 Graphics card
I have the latest graphics card drivers installed. I am just wondering what the problem is, and a potential fix. Would be great to hear any advice,
Regards,
Adam.

OK, here are some other things to think about:
ATI/AMD Catalyst seems to have an issue with one of the latest versions, maybe rollback to an earlier version.
Depending on your OS, check Hardware Acceleration (though this usually affect smoothness of playback) in Control Panel>System>Hardware>Advanced.
Check your OpenGL settings.
In Catalyst, turn OFF any GPU Acceleration
That's about all that I can think of for now, and those are shots in the dark.
Good luck,
Hunt

How doI get dyno pro web browser?

Unable to access web site and error states must use, dyno pro web browser?
How can I fix this on mac computer?

See:
* http://boardreader.com/thread/Problems_with_Web_Dynpro_and_Firefox_4_6rv33X159dx.html

How long should a new battery last when installed for a mac book pro 2009 with only a web browser opened?

I recently went to the apple store in Covent garden and had a battery replaced for my Mac Book Pro 2009 edition.
After fully charging the mac the percentage guage meter displays the battery is losing power fast. 1% increments goes down every 5 minutes even if I have only a browser which is opened and no other running applications.
My recent test after a fully charged mac book pro allowed me a maximum use time is 2 hours!
I have friends and family members who have the same model as me and their mac book when running on battery, shows that the laptop has about 6 hours use. They are able to run multiple applications and use sites such as Youtube and still get a good 4 hours of use.
Anyway, I have booked an appointment with a Mac Genius for tomorrow to look into this issue.
I thought I'd just ask the community to find out if any of you can help.
Many thanks in advance.

Thank you Donald.
You are the second person to tell me this so this is more of a reason for Apple to sort out issue for me.
The team there don't believe there is an issue with the battery.
Thank you once again.

After several repairs, still having heating issue with MacBook Pro (mid '09)

EDIT: this post got removed the first time for not being constructive enough. I've now edited the post.
This is going to be a lengthy post, so bear with me.
2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) heating up a lot harder than usual. I'm familiar with the heating issues these laptops have, but this wasn't normal. Looking at iStat Pro, I saw my fans almost taking off like an airplane at 5700 rpm, while watching only a livestream on my browser. I know Shockwave Flash takes up quite a chunk of your CPU, but I had never encountered this problem beforehand.
The biggest problem wasn't just the heat or the fans, but the fact that my computer also started reacting rather slowly. Sometimes I'd even get beachballed, or the whole browser stopped responding for half a minute...
So I tried to see if gaming was still an option. Of course not. I had been playing League of Legends for several months without any issues. Whilst playing, I'd kick up my fans manually to about 4000 rpm, and they'd stay there throughout the whole game. Now, when I start up the game, it plays smoothly for the first 2 minutes. After the temperatures rise to a critical level, the fans start spinning up to 5700 rpm, and the whole game plays like a powerpoint presentation.
On a sidenote: it sort of 'lags' every 1-2 seconds, and sometimes, after a long period, the game acts somewhat normal again (20 mins). This game uses wine to run, which isn't the most optimal way. So I tried playing Team Fortress 2, too. Probably even worse results! (but again noticeable 1-2 second interval lags)
Before anyone starts screaming: "Don't use your Mac for gaming!" etc., I wish to point out that these two games had been running perfectly for the past few months/years. Something's definitely wrong.
After looking for some solutions myself, I decided to go to an authorized Apple Service in my city. A few days later, they told me my logic board was broken, and I had to pay almost 700 euros ($ 900-1000) to replace it. So I did. I got it back, but it wasn't fixed. Brought it back in. Got it back a week later: "Your new logic board we got from Apple was already broken, but we hadn't noticed. We put a new one in it. It's fixed." Again, same problem.
We're almost 2 months later and 700 euros poorer, still no result. I've brought it in about 6-7 times now, here's a list of what they've tried so far:
- In total 3 new logic boards
- New MagSafe (because they discovered it was giving too much power too my laptop)
- Fresh re-install
- Replaced RAM
- Checked fans etc. (they do this by default)
- A few tests which proved that it was repaired (but I have my doubts with these tests...)
They told me now that it's fixed, and they basically won't look into it anymore. I must contact Apple myself, if I wasn't satisfied. The tests they performed showed no signs of heating issues. (One of the tests was playing 4 1080p movies at the same time. When I watch a 1080p movie on Youtube, my laptop is taking off like a plane) They ran a stress test all night long, showing no temperatures above 98°C. I got it up to 105°C in a few minutes according to iStat Pro.
They advised me to install Mountain Lion, which would make the issues with "high-performance sites" go away. I haven't seen much improvement, though.
This whole experience has been quite frustrating, especially now that I'm gonna need my laptop for University again. Isn't there anything I can do? I've paid almost 700 euros and missed my laptop for 2 months, without any results.
I've got more information regarding the issues if needed, ask away. I'm getting desperate.
I've been browsing around the support communites, and found that a lot of people are having issues since they upgraded to OS X Lion. Could this be the case? Should I try downgrading to Snow Leopard?
I've also found a few topics on refreshing the cooling pasta on the heatsink. Would they have noticed any problems with this after replacing the Logic Board several times? Or should I check it myself? I'm not too keen on opening up my laptop myself...
Nick.

Thought of buying Parallels? Fusion?
Might want to see if this gets moved to the MacBook Pro forum.
I'd think Windows 8.1 is smart enough (what I use 90% time since the Dev Preview came out couple yrs ago it seems like) to find the driver.

Ea6300 causing network issues when connecting to web browser on my Mac

I have had my ea6300 for two months and its causing major issues when connecting to my web broweser before I throw it out the window can someone give me some help.

Hi bigtimer30, what do you mean by “it’s causing major issues when connecting to my web browser”? Do you mean that the MAC computer is no longer able to access the internet? If yes, is it with both wired and wireless connections? Is this happening to all of your devices? Or just that specific MAC computer? If all the other devices are still able to connect except the MAC, I suggest that you do a power cycle on the computer (if you haven’t done it yet). And you’re having difficulties with the wireless part, try to hard wire the computer straight to your router, and check if you experience the same thing. If the wired connection is okay, you may try playing with the router’s wireless channel. Better if you could give more details for us to give you more suggestions.

Still having problems with QT in web browser

I posted earlier this week about a cd-rom that I have created that uses a web browser as an interface. The problem is that on my Powermac and Powerbook the videos load instantaneously, but when a Windows user boots up the disk the videos take several moments to load, sometimes several minutes for the larger file sizes. I have saved all the QT files using "Save As" and set them up for Fast Start but still to no avail.
QuicktimeKirk, you were the only one who replied to my earlier question, and here's a copy of the code for one of the movies:
<html>
<head>
<title>Spring 04 Promo</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#999999" text="#000000" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">
<OBJECT CLASSID="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" WIDTH="672"HEIGHT="464"
CODEBASE="http://www.apple.com/qtactivex/qtplugin.cab" align="middle">
<PARAM name="SRC" VALUE="sprgspot.mov">
<PARAM name="AUTOPLAY" VALUE="true">
<PARAM name="CONTROLLER" VALUE="true">
<EMBED SRC="sprgspot.mov" WIDTH="672" HEIGHT="464" AUTOPLAY="true" CONTROLLER="true" PLUGINSPAGE="http://www.apple.com/quicktime/download/" align="middle">
</EMBED>
</OBJECT>
</body>
<script>
windowWidth = 672;
windowHeight = 464;
if (parseInt(navigator.appVersion) >= 4) window.moveTo((screen.width/2)-(windowWidth/210),(screen.height/2)-(windowHeight/220));
</script>
</html>
Any ideas?
G4/350 Powermac+G4/550 Powerbook Mac OS X (10.3.9)

Those data rates are sort of large (especially the audio). But I don't see any reason why a "modern" CD drive couldn't keep up.
Most .mp3 files are 128 KB/s and MPEG-1 video varies.
I would do a one minute "test" file with various export settings. Adjust the data rates from the 100 to 300 (video) and again to 300 to 600 and last at 600 to 1,000. The same with the audio (128, 256 and 320).
You may find that these lower data rates not only speed up playback times but give you a file size reduction that allows you to put more data on a CD.
Internet Explorer is the most used on PC's. It is far from the best browser.
Last issue could be graphics cards that control the video playback. You'll want to design your QT .mov files for the lowest end cards.
This means no H.264 video codecs and lower data rates.
Your combined data rate is only slightly higher than those found on an audio CD. If the PC can play an audio CD without buffering it should be able to handle your .mov file (even at your current rates).

Issue with SSL in web service.

Hi All,
We are having synchronous web service to proxy scenario in XI. We are trying to send a binary data using the SOAP web service to SAP via XI. Initially, we were posting large binary data using HTTP connection via XI from the SOAP client. The scenario was working without any issues.
Since the data is sensitive changed the web service from HTTP to HTTPS.The interface works without issues when we test it using the SOAP client for testing. When the data is sent using the Dot Net application (the end application) using the same webservice, URL (HTTPS connection) the message errors out. The connection is borken and the message fails. In this scenario, XI does not even receive the message which I can make out looking into the SOAP adapter communication channel.
The interesting fact here is the same Dot Net application is able to connect and send smaller binary data using HTTPS connection.
Could you please let us know if this could be the issue with HTTPS connection on XI side? I doubt it to be an issue on XI side because the adapter does not even receive any message when the scenario fails. But we used some HTTPS monitoring tools and found that the Dot Net Application receives some encrypted response from the server which the application is not able to decrypt and the handshake breaks.
Could you please throw some inputs into this issue.
Thanks,
Manohar.

Hi Manohar
You have posted the same question with two different subject text
anyway follow these SAP notes your problem will be short out
Note 856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=856597&_NLANG=E
Note 856599 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 Mail Adapter
https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=856599&_NLANG=E
Note 870845 - XI 3.0 SOAP adapter SSL client certificate problem
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=916664&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=870845&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede
check the OSS Note 554174 & see if it helps
Note 645357 - SAPHTTP: SSL error
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=645357&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1150980&nlang=EN&smpsrv=https%3a%2f%2fwebsmp102%2esap-ag%2ede
one alternative may be Restart ICM (Internet Communication Manager) .This will solve your HTTP issue
Cheers!!!!
Regards
sandeep
if helpful kindly reward points

Resolution issue with macbook pro 13 (late 2013) and dell u2711

I have a Dell U2711 (native resolution 2560x1440) that I use without issue with a macbook pro late 2007 (running 10.10.x), various iMacs and Macbook air 2011 running 10.10. When I say without issue, the display works at its native resolution.
Last week we got a MacBook Pro 13in, late 2013 model.
If I connect this macbook via either thunderbolt connection to the u2711 using either DVI port on the dell, the maximum resolution that I can use is 1920x1080. I am using apple mini displayport to DVI adaptors (I have tried 2 different ones and 2 different DVI cables, with no improvement). Clicking option + scaled in sys prefs does not give the native resolution as an option.
However, I just discovered that if I use a DVI to HDMI adaptor and I connect the macbook to the display I get the full native resolution without issue (2560x1440).
I have zapped the pram, powered down the display etc etc etc and it made no difference.
I would prefer to use the mini DIsplayPort to DVI adaptor rather than HDMI, any suggestions appreciated.
TIA.

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best.

Wrt150n issues with xp pro web browser

Similar Messages

Maybe you are looking for