WRT150N (New) Gateway IP stops responding to LAN and wireless clients. Hangs, stops, loss of service

WRT150N Firmware Version: v1.51.3 : From LAN and wireless connected devices, Internet connectivity is lost. I try to ping the LAN side gateway IP address from my laptop and desktop, no response. Web management does not work either. Power re-cycle of the WRT150N fixes the problem. The problem is infrequent, it can happen twice per day or once every 2 days.
When the problem occurs,
the DHCP info in my clients looks fine and shows the correct gateway IP address, mask etc. ;
the desktop and laptop can still ping each other;
The gateway is unreacheable and all out going connectivity is lost
Does anybody have any solution or maybe has had the same experience.
I cannot track the problem happening to any particular event or usage pattern however I am using the Azureus bit torrent client all the time.
I have an incident raised with LinkSys Technical Support but no response so far from them.
WRT150N Firmware Version: v1.51.3

Hi - please go to this thread for more details:
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=103033#M103033
or search for the other thread started by (fb2k). But briefly over the 1 year period since this thread started my local store replaced my wrt150n 3 times and then gave me a wrt160n which was replaced and its still having the problem. I am now running Open Source wireless software (DD-WRT) on the WRT160N and it has been up 18 days with no restart. I didnt want to do this but I got fed up taking my unit back to the store. Thanks to fb2k (on the other thread) for taking the plunge and reporting success with the DD-WRT software.
Message Edited by NetGuy-Dubai on 08-23-2008 01:06 PM
Message Edited by NetGuy-Dubai on 08-23-2008 01:07 PM

Similar Messages

Firefox stops responding during Gmail and Google, why?

The last few weeks, Firefox 4.1.0, on my XP SP3 system, stops responding while I am sending Gmail, frequently, stopping the transmission. Today, for the first time, it stopped responding while I was searching on Google.
The LAST thing I want to do is go back to Microsoft's IE.
JMS

Well, clearing cookies and cache over and over does not work.
Also, Firefox stops working with many sites now and I am tired of closing it down every 3 minutes. So, my solution this morning was to import my bookmarks to Google Chrome and it worked. After using Firefox for many, many years, I will now be using Google Chrome.

Lion server on Mac mini server stop responding to ssh and VNC (other services like mail, ical works well)

Lion server on Mac mini server stop responding to ssh and VNC (other services like mail, ical works well)
Version is Lion server 10.7.4
When I attach a monitor to it, I saw all the buttons and menus stopped responding too. I can only push and hold the power button on the box to shutdown.
It only started happening recently.
Anyone has any clue?
Thanks for the help in advance!!!

Found that the second hard drive is broken. I have to go to the apple store to have it replaced.
I had to press the power button to turn the server off for several times, then the broken hard drive went disappeared. After that, I had to disable the Spotlight. Then the server went back to work normally.
Now I made a CCC copy of the primary hard drive, and would like to have the server run on the external raid disk (connected through thunderbolt). Does anyone have previous experience with it? Any expectable drawback or issue with this setup?

HT201412 so today my ipod touch 4 gen ios 5.1.1 stopped responding to touch and then it got really hot and died so i try to charge it... nothing happens. what should i do?

so today my ipod touch 4 gen ios 5.1.1 stopped responding to touch and then it got really hot and died so i try to charge it... nothing happens. what should i do?

retrojustin wrote:
...and then it got really hot and died so i try to charge it... nothing happens. what should i do?
Call Apple.

After purchasing Adobe Acrobat Pro my download window is painfully slowly and seemingly stuck. If i try to pause or cancel the download it stops responding completely. I have tried to stop/start, redownload, and start fresh several times...all with the

After purchasing Adobe Acrobat Pro my download window is painfully slowly and seemingly stuck. If i try to pause or cancel the download it stops responding completely. I have tried to stop/start, redownload, and start fresh several times...all with the same result. Any advice?

Try downloading the offline installer from http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html
Make sure you follow the Very Important Instructions on that page.

My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(

My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(

settings - general - usuage - music - delete. Then do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then sync the music back via iTunes.

How to turn on both LAN and Wireless T430

I need both my LAN and wireless enabled at the same time. Can I turn them both on using Think Advantage? I believe our IT dept has uninstalled any ThinkAdvantage software. Which ThinkAdvantage software should I download and where do I turn both the wireless and the LAN on at? Thank you

Windows doesn't make it easy for you to have different processes access different networks simultaneously.
You can force it to prioritize one over another as so:https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/wired-and-wireless-connection...
But it's all or nothing; you use either-or.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

Volume key on HP Pavilion dv7 stops responding from now and then, also issue with finger scanner?

First problem I've been having would have to be the finger scanner. I've only been using this to sign into Windows, but after a day or so of use it would occasionally stop responding (forcing me to sign in manually or reset to fix it).
For the Volume keys, I've been having trouble getting them to adjust the sound from time to time. Sometimes it works, others it wont (even though the icon screen appears showing they're being pressed, there's no change in volume). I'd end up having to bump the vol up or down manually in the bottom right corner to get it working again). But after awhile the issue ends up reoccuring again.
I can live with the finger scanning problem but this volume thing is starting to get to me.

Hello Laurie,
What is your product number and operating system? I'll send you a link to the steps to help get everything back, once I get this info from you.
Thanks!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

LAN and Wireless Not communicate

Dear support,
I do have a Cisco router and Juniper firewall, which allow me to connect to internet.
Internally after the firewall, i connect it to switches and wireless AP.
Both switch and wireless AP must be able to talk to each other, when user pc connect to LAN via switch or wifi via wireless AP
My switch is Cisco 2960, and AP is AP1142N.
I do have application, IPhone which install an app, call media remote, this features enable me to remote control to my music device
IPhone connect using wifi
Music device connect using switch
Cisco router ------ Juniper firewall ------ Catalyst 2960 ----------- AP1142N . . . . IPhone
                                                                       |
                                                                       |
                                                                       |
                                                                 Music device
If in above scenario, my Iphone not able to detect music device
Cisco router ------ Juniper firewall ------ Catalyst 2960 ---------Hub ----------- AP1142N . . . . IPhone
                                                                                                     |
                                                                                                     |
                                                                                                     |
                                                                                               Music device
I don't understand why if i using any brand hub, example 3com, belkin, buffalo, etc, which use only as hub, just connect to my cisco switch, and both music device and AP1142N, are able to talk (iphone able to search my music device)
If i replace the hub, as cisco switch, and use it as default setting, it not able to detect
The connection to hub, i am using access port, as we only have one vlan.
My configuration as below for my switch and wireless ap
I wonder why only normal hub able this two device to communicate, but cisco not.
Thanks

Thank a lot.
i already enable the igmp on switch
when i show igmp snooping at switch
Vlan4:
IGMP snooping                         : Enabled
IGMPv2 immediate leave          : Disabled
Multicast router learning mode: pim-dvmrp
CGMP interoperability mode    : IGMP-ONLY
Robustness variable              :2
Last member query about      :2
Last member query internal   : 1000
Both vlan 1 and vlan 4 is the same
I already try enable igmp on firewall side as well, juniperSSG140
but still not work, anyone can help?

I have three problems with Firefox 3.6.8 that 3.6.9 hasn't fixed: 1) Firefox has stopped responding to any and all javascripts, 2) Firefox won't play any embedded videos, and 3) Firefox won't let me open up new windows.

Every new link has to be opened in a new tab, or nothing happens. No matter how I try, I can't open more than one window with Firefox. Worst of all, if I surf the Internet for more than an hour, all these problems have a cumulative effect and Firefox simply crashes. I'd uninstall 3.6.9 and reinstall 3.6.6 (which gave me no problems) if I could only figure out how to save and export all my passwords and user IDs first -- that's way too much to have to input again from scratch!!

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

HT3529 I have had my iPhone unlocked properly but now on my new network, with the same number, iMessage and push notifications have stopped working. Any solutions?

I have tried restoring my iphone twice as recommened by my local apple store staff, still no luck

Is the new carrier you're using an official iPhone carrier? Apple warns that not all features of an iPhone will be available when using an iPhone with a non-supported carrier.
Who is your new carrier?

A message will pop up (Exc in ev handl: Error: Bad NPObject as private data!) and the tab I was on will close out and reopen in a new window. Why is it happening and how do I stop it?

Okay, I will have a window open with 4 tabs open. At first, everything is fine, but after a day or so, a message will pop up on screen saying "'''Exc in ev handl: Error: Bad NPObject as private data!'''" and after you close it out, the tab you were on will close and reopen in it's own window. I then have to shut down all both old and new windows and open a new window with my original 4 tabs again. It will work fine until a few days pass and it starts over again.

This issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Keyboard (USB) stopped responding ... and then it did. What's it mean?

I had 2 external HDs attached via firewire and USB connections and was copying something from one to the other. I've done this before with no issues.
When I went to use the keyboard to check the backup (command I - for get info) I got no response from the keyboard.
The backup completed successfully, but no response from the keyboard. I couldn't type commands, or write anything in a doc or in Google's search field.
I unplugged the 2 HDs. I unplugged my USB printer. The only thing I left connected was the keyboard and the USB receiver for the mouse.
I repaired permissions.
I put new batteries in the mouse (USB Logitech) just in case that was the problem.
Still no response.
I came to our MBP to type this question and let the iMac sit and think about it. I did nothing else to it while I panicked over here.
Mr H, with the magic touch, went to the iMac - opened a new text edit doc and started typing - no problem, opened Google - typed into search field - no problem. I couldn't get either of these to do anything.
I was afraid to shut down or restart since I wouldn't be able to log in (though I do have it currently set to login automatically, so I guess I would be logged in and I could shut down or restart)
Any ideas on what this is all about and what/if I need to do anything?
Repair permissions showed a lot of things out of place, but showed it repaired things successfully. I had recently updated firefox but did a repair after doing the update (manually) and had no problems.
Did my 2 HDs together cause a problem though it's never done so before?
Mrs H

Rudegar wrote:...
held down the button on the back the on/off button and closed and started it again and all was well again
try it
Thanks, Rudegar, for the suggestion.
But as I said above, "Mr H, with the magic touch, went to the iMac - opened a new text edit doc and started typing - no problem, opened Google - typed into search field - no problem..." which is to say the problem has solved itself by just regrouping itself after all peripherals were detatched and HDs no longer involved? We'll see if it reproduces itself next time I do this HD-HD copy.
I don't know why it's fixed, but since all is well, the permissions are repaired, and I've put it to sleep and awakened it, and it's still running fine (indeed I'm typing on the iMac now), I am loathe to do anything to solve a problem that seems to no longer exist.
If things go awry I will first try a restart or perhaps just shut down from the Apple menu. As I said I was worried about doing this fearing I'd have to log in and not be able to do it - but the auto login setting works to my advantage here.
Anyone else have any ideas on what went wrong???
Thanks again,
Mrs H

[Solved] Network problems with MSI GX60 Destroyer, killer newtork LAN and wireless

Hi, I bought a MSI GX60 Destroyer 2 weeks ago, and I realized that my internet was a little slow, you don't realize in the web but when downloading it doesn't perform how it should, I tested the speed now with wireless and I got 5 mb/s, and I have 20 mb/s in my house (I also tested with cellphones and other pc's), with LAN the speed was normal, so I saw some forums about the Killer network, I tried to change the drivers but nothing, the wireless is limited to 5 mb/s and now my LAN too.... please help, my phone has 4x better internet than my GAMING Laptop.
Also the Atheros drivers are a pain in the ass it's really hard to remove them.
I'm now with the drivers without the Management app.

Quote from: hch;109858
Hi Tzin,
Which graphics driver are you using?
The quick stream is installed on the notebook with the generic graphics driver from the AMD website.
If you install the AMD's generic graphics driver, you'll find the quick stream program in your Uninstall programs window.(Control Panel> Uninstall a program)
Hi hch , i only can find the "amd cystal manager " under the unintall a program , so when i click into in then only saw the device but dont see the quick stream .

WRT150N (New) Gateway IP stops responding to LAN and wireless clients. Hangs, stops, loss of service

Similar Messages

Maybe you are looking for