WRT150n SLOW!!! and constantly renewing IP address.

I have a WRT150n and a Belkin USB Wireless N NIC.
I am having two problems. First it keeps dropping connection and takes forever as it is "Acquiring new IP Address" every few minutes.
And secondly, It is SLOW!!. I have a 6 meg Cable Connection to the Web. I can plug straight into the Cable Modem and get great 6 meg dl speeds, I can plug the WRT150n to the box and get 6 meg speeds (DSL Reports/Speedtest) if I am plugged directly into a port on the router with a network cable (Intel Chipset NIC built into MoBo) but when I am connected wireless I can only get about 500K.
Any suggestions would be greatly appreciated.

802.11.n is not a Linksys standard. It is a IEEE standard. It is also a new standard that hasn’t been perfected yet. Most of the 802.11n devices you are buying are 802.11n ready kind of like “Vista Ready” devices. Linksys didn’t invent the standard nor did they invent the technology that is designed to use the standard. Linksys built a router and NIC (as well as other devices) that are able to utilize the standard.
The issue could be your computer entirely. Your motherboard may or may not support a NIC with that high wireless ability.
There is a number of reasons why 802.11b and 802.11g are working better then 802.11n one reasons is because computers and routers will automatically choose the fastest connection available according to ALL software and hardware limitations not just because you bought a new NIC and put it in.
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

Similar Messages

How do I know if I have a wifi problem with my new iPad 3 (it seems very slow) and how does one address the problem with apple if there is one?

I just read about the possible issue that some folks are having with their new iPad wifi (my seemed to be running very slowly but I thought that perhaps it was just me overreacting). How do I know if I have a definite problem, and what is my recourse? Do I need to take it to an Apple store for testing? I have apple care which I assume addresses stuff like this. Thoughts? Thx so much.

Your iPad is covered by the normal warranty for one year. If you have AppleCare that extends the coverage. If you feel there is a problem with your wifi reception visit an Apple store with your iPad for a consultation. Be sure to make an appointment before you go.

My MacBook is very slow and constantly has the spinning beach ball of death!!!

In the last couple if weeks my MacBook has suddenly slowed down a LOT. Sometimes it takes ages for it to boot up when I turn it on and at other times not as long. Then once I log in, as soon as I click on something, the spinning beach ball appears and won't go away so I have to force it to restart.
It runs a little bit faster in safe mode and if I log in as a guest user, but it's still relatively slow.
So far I have tried the following:
- starting in safe mode
- resetting PRAM
- turning off then pressing ctrl, option, left shift and the power button for 10 seconds then turn it back on
- repairing disk permissions
I've been told that it might be best to reformat my mac, but in order to do this I need to back up. I bought a Seagate Back Up Plus 1TB and tried to use time machine. After a while a message popped up saying "Time Machine Error. Unable to complete backup. An error occurred while creating the backup folder.". There is something on my hard drive, but I cant tell if my mac has fully backed up or not.
Any suggestions?

How large is your HD and how much space do you have left?
Check out the following & do the necessary:
User Tip: Why is my computer slow?
What to do when your computer is too slow
Speeding up your Mac
===========
Troubleshoot the spinning beach ball/freezing & crashing
Troubleshoot the spinning beach ball
Apple OSX and Time Machine Tips (Leopard - ML
Mac Basics: Time Machine
OS X Mountain Lion: Alternatives for backing up your Mac
User Tip: Most commonly used backup methods
Emergency backups you didn't know you had!

My firefox browser is very slow,and constantly reads the hard disk,when i switch off the wi fi button on laptop,the hard disks stops reading

these are the last many crash details
Report ID Date Submitted
53754937-6cf1-4f3b-8e80-5e018848d34d 24/02/2015 13:01
d301607c-cc67-4ee5-84ff-137e5213854b 22/02/2015 13:54
7d2ed0aa-b929-4325-9846-9f627c715a97 20/02/2015 21:18
7c7d6258-818e-48b7-bacc-bbbfd67e2b5c 20/02/2015 21:17
8ed02479-b8f3-4916-9be7-9a760d98e2dc 15/02/2015 17:29
f2fdbfd9-c11a-449c-8a09-5eeca161d482 12/02/2015 14:00
6cb2fb1f-2af0-4a03-9530-d5d2ab61882f 11/02/2015 11:00
c48929ef-6cb2-4e95-aa4a-04c7efdef6e7 10/02/2015 12:33
911e51a7-1e0e-4e00-9d51-35daaf024082 03/02/2015 12:51
9cbeb1e0-f542-42f8-b359-d1d77404f9eb 28/01/2015 18:10
a24e1d6a-212e-43e2-a646-937608b40b60 25/01/2015 11:31
dcb98d1b-c579-4ee5-b5e8-772d20ce5e63 13/01/2015 22:00


this is the most recent crash report with bp
Report ID Date Submitted
bp-6f1d775b-777b-472e-98e4-a12802150227 27/02/2015 15:52
and when clicked on bp link these are the messages
Mozilla Crash Reports
Search
Product:
Select Version:
Report:
Super Search
Firefox 35.0.1 Crash Report [@ hang | WaitForMultipleObjectsEx | RealMsgWaitForMultipleObjectsEx | mozilla::widget::WinUtils::WaitForMessage(unsigned long) | base::MessagePumpForUI::WaitForWork() | base::MessagePumpForUI::DoRunLoop() ]
Search Mozilla Support for Help
ID: 6f1d775b-777b-472e-98e4-a12802150227
Signature: hang | WaitForMultipleObjectsEx | RealMsgWaitForMultipleObjectsEx | mozilla::widget::WinUtils::WaitForMessage(unsigned long) | base::MessagePumpForUI::WaitForWork() | base::MessagePumpForUI::DoRunLoop()
Details
Metadata
Modules
Raw Dump
Extensions
Signature hang | WaitForMultipleObjectsEx | RealMsgWaitForMultipleObjectsEx | mozilla::widget::WinUtils::WaitForMessage(unsigned long) | base::MessagePumpForUI::WaitForWork() | base::MessagePumpForUI::DoRunLoop() More Reports Search
UUID 6f1d775b-777b-472e-98e4-a12802150227
Date Processed 2015-02-27 10:22:53.454001
Process Type plugin Shockwave Flash Version:16.0.0.305 Filename:NPSWF32_16_0_0_305.dll
Uptime 653
Install Age 2390456 since version was first installed.
Install Time 2015-01-27 15:30:06
Product Firefox
Version 35.0.1
Build ID 20150122214805
Release Channel release
OS Windows NT
OS Version 6.1.7601 Service Pack 1
Build Architecture x86
Build Architecture Info GenuineIntel family 6 model 42 stepping 7 | 2
Crash Reason EXCEPTION_BREAKPOINT
Crash Address 0x7705015d
User Comments
App Notes
AdapterVendorID: 0x8086, AdapterDeviceID: 0x0106, AdapterSubsysID: 397517aa, AdapterDriverVersion: 9.17.10.3347
Processor Notes sp-processor03_phx1_mozilla_com.27927:2012; MozillaProcessorAlgorithm2015; non-integer value of "SecondsSinceLastCrash"
EMCheckCompatibility
True
Winsock LSP
MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP TCPv6 Service Provider : 2 : 1 :
RSVP TCP Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP UDPv6 Service Provider : 2 : 2 :
RSVP UDP Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD RfComm [Bluetooth] : 2 : 1 :
Adapter Vendor ID
0x8086
Adapter Device ID
0x0106
Bugzilla - Report this bug in Firefox Core Plugins Toolkit
Related Bugs
Crashing Thread
Frame Module Signature Source
0 ntdll.dll NtWaitForMultipleObjects
1 kernelbase.dll WaitForMultipleObjectsEx
2 kernel32.dll WaitForMultipleObjectsExImplementation
3 user32.dll RealMsgWaitForMultipleObjectsEx
4 xul.dll mozilla::widget::WinUtils::WaitForMessage(unsigned long) widget/windows/WinUtils.cpp
5 xul.dll base::MessagePumpForUI::WaitForWork() ipc/chromium/src/base/message_pump_win.cc
6 xul.dll base::MessagePumpForUI::DoRunLoop() ipc/chromium/src/base/message_pump_win.cc
7 xul.dll base::MessagePumpWin::RunWithDispatcher(base::MessagePump::Delegate*, base::MessagePumpWin::Dispatcher*) ipc/chromium/src/base/message_pump_win.cc
8 xul.dll base::MessagePumpWin::Run(base::MessagePump::Delegate*) ipc/chromium/src/base/message_pump_win.h
9 xul.dll MessageLoop::RunInternal() ipc/chromium/src/base/message_loop.cc
10 xul.dll MessageLoop::RunHandler() ipc/chromium/src/base/message_loop.cc
11 xul.dll MessageLoop::Run() ipc/chromium/src/base/message_loop.cc
12 xul.dll XRE_InitChildProcess toolkit/xre/nsEmbedFunctions.cpp
13 plugin-container.exe content_process_main(int, char** const) ipc/contentproc/plugin-container.cpp
14 plugin-container.exe wmain toolkit/xre/nsWindowsWMain.cpp
15 plugin-container.exe __tmainCRTStartup f:/dd/vctools/crt_bld/self_x86/crt/src/crt0.c:278
16 kernel32.dll BaseThreadInitThunk
17 ntdll.dll __RtlUserThreadStart
18 ntdll.dll _RtlUserThreadStart
Show/hide other threads
Mozilla Crash Reports - Powered by Socorro - All dates are UTC
Server Status
Source
Docs
API
Privacy Policy
Sign in

Ever since downloading the OS X Maverick on my MacBookPro it is sluggish, very slow and constantly get the spinning beach ball...any fixes?

Since downloading the OS X Maverick my computer has been sluggish. Never had this issue until this download. Is there a way to remove OS X Maverick or another fix?

Here is the system report:
Hardware Information:
          MacBook Pro (15-inch, 2.53GHz, Mid 2009)
          MacBook Pro - model: MacBookPro5,4
          1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 4 days 1:15:38
Disk Information:
          Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 249.2 GB (165.78 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-868
USB Information:
          Apple Inc. Built-in iSight
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          net.kromtech.kext.Firewall          (2.3.6 - SDK 10.8)
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.flipvideo.FlipShareServer.launchd.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.leapfrog.connect.shell.plist 3rd-Party support link
          [System] com.zeobit.MacKeeper.AntiVirus.plist 3rd-Party support link
          [System] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist 3rd-Party support link
Launch Agents:
          [System] com.flipvideo.FlipShare.AutoRun.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
          [System] com.hp.productresearch.plist 3rd-Party support link
User Launch Agents:
          [not loaded] [email protected]
          [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
          [not loaded] com.google.Chrome.framework.plist 3rd-Party support link
          [not loaded] com.zeobit.MacKeeper.Helper.plist 3rd-Party support link
          [not loaded] ws.agile.1PasswordAgent.plist 3rd-Party support link
User Login Items:
          GrowlHelperApp
          Dropbox
          Monitor
Internet Plug-ins:
          DirectorShockwave: Version: 12.0.5r146 - SDK 10.6 3rd-Party support link
          o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
          Unity Web Player: Version: UnityPlayer version 4.0.1f2 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.4.2.4 3rd-Party support link
          Silverlight: Version: 5.1.20513.0 - SDK 10.6 3rd-Party support link
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          Flash Player Plugin for Chrome: Version: 11.4.402.265 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          CouponPrinter-FireFox_v2: Version: Version 1.1.9 - SDK 10.5 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 12 Outdated! Update
Safari Extensions:
          1Password: Version: 3.9.9
          Awesome Screenshot: Version: 1.3.7
          GMail Counter: Version: 0.9.3
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
Old Applications:
          /Applications/iWork '09
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          Network Recording Player:          Version: 2.2.0 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/WebEx Folder/500/Network Recording Player.app
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: NO - Auto backup turned off
          Volumes being backed up:
                    Macintosh HD: Disk size: 232.09 GB Disk used: 77.69 GB
          Destinations:
                    My Passport for Mac [Local] (Last used)
                    Total size: 931.36 GB
                    Total number of backups: 14
                    Oldest backup: 2011-10-21 21:23:05 +0000
                    Last backup: 2014-04-03 14:18:33 +0000
                    Size of backup disk: Excellent
                              Backup size 931.36 GB > (Disk size 232.09 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              12%          Google Chrome
               7%          WindowServer
               1%          Dropbox
               1%          EtreCheck
               1%          hidd
Top Processes by Memory:
          172 MB          AntiVirus
          168 MB          Google Chrome
          103 MB          Google Chrome Helper
          82 MB          Finder
          70 MB          Skype
Virtual Memory Information:
          139 MB          Free RAM
          1.25 GB          Active RAM
          1.10 GB          Inactive RAM
          554 MB          Wired RAM
          32.67 GB          Page-ins
          1.01 GB          Page-outs

Itunes 10.4 extremely slow and "hangs"

Ever since I upgraded to Lion, the new iTunes is extremely slow, and constantly "hangs" (showing the dreader Beach Ball of Death). This happens for an especially long time whenever I'm downloading podcasts and otherwise syncing my iPod Classic.

The problem about screen size values happens to all video that I import in Itunes from the same source (my Samsung HMX-H100P HD Camcorder).
The strange thing is that if you look at the scren size values with other software (QuickTime, Avidemus), the values shown for scren size are corrected as expected: 1280x720.
I installed Itunes 10.4.0.80 1 month ago and it was the first installation of Itunes on my PC.
Reinstalling (deinstall + install) Itunes is not a solution to the problem: I tried this yesterday without success.

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that.

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that. I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house. For some reason the range is low and speed veru disappointing.
I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed. Please HELP!

No silver bullet........but my suggestions may drive you in the right direction.
1. Unplug the power cable from the TC and wait 10-15 minutes before powering back up.   Seriously wait!
      Proceed to #2 if this dosen't help.
2. Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem.
2a. Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch) wait for all the modem lights to come on EXCEPT activity.
2b. Connect ethernet from modem to TC, and plug in the power cable to TC.
      Proceed to #3 if this dosen't help.
3. Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
All really simple to do....if you need additional help let me (us) know.

HT1766 why is my phone so slow, it has never been this slow and it constantly restarts it's self...?

why is my phone so slow, it has never been this slow and it constantly rests it's self ??

Hello, mackenzienesbitt.
Thank you for visiting Apple Support Communities.
Here are a couple resources that have some helpful troubleshooting steps for this issue.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H.

Computer running super slow and fan is constantly on

Hello, I am really hoping someone can help me. My computer is running incredibly slow, and the fan is constantly on high as soon as I turn it on. I have tried the SMC reset as I have read in other forums, but it has been an hour now and that has not seemed to work. Is there anything else I can try?

Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

Why is my computer so slow and now constantly freeze up after installing OS 10.10 Yosemite?

Why is my computer so slow and now constantly freeze up after installing OS X Yosemite?

If your Mac runs slowly:
http://support.apple.com/kb/PH19031?viewlocale=en_US&locale=en_US
Start up in Safe Mode. http://support.apple.com/kb/PH18760
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
FileVault encryption may make the Mac run slowly after installing new version of OS X.
Let it finish.
Remove unnecessary software like CleanMyMac2.
Run EtreCheck: https://discussions.apple.com/docs/DOC-6173
Take a look at it or post a report here.

Why is my computer so slow and now constantly freeze up after installing OS X Yosemite?

Why is my computer so slow and now constantly freeze up after installing OS X Yosemite?

Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information

GE60 fan problem. speeds up and slows down constantly [EC reset done]

My model is GE60 OCN and bios and EC is the newest ones for win7 embeded on msi website.
I have the same problem with others if you search here 'ge60 fan'.
The temperature between 50~60℃ the fans runs slow and really quite.
But if the temperature goes down under about 46℃, it speed up and slows down constantly and it is annoying and much noiser.
I think msi should provide new EC firmware for this. Even the temperature is low, it annoys and nosier than when the temperature is between 50~60℃.
Please check this problem and provide new EC firmware for fan policy.
Someone has uploaded video link: youtube.com/watch?v=OQjjjVOpsEQ
this is exact problem with me as well.

I have exactly the same problem. Let's continue in the other thread (https://forum-en.msi.com/index.php?topic=165613.0)

Why is my macbook Slow and fan always running

I recently upgraded to Mavericks, and since then my computer has been slow and lagging a lot. I see the perpetual spinning beach ball more than I would like. I have done everything I can think of within my knowledge to rectify the problem but it still seems slow to me. I have unistalled apps, cleared caches, run an antivirus, run onyx and cleanmymac applications. I don't know what else I can do. I also find that my fan is running constantly and when I look at the activity monitor nothing is eating my CPU, in fact it is always below 10%. Here is my most recent Etrescheck. PLEASE HELP!! I'm open to all and any suggestions. Thank YOu
Hardware Information:
          MacBook (13-inch, Aluminum, Late 2008)
          MacBook - model: MacBook5,1
          1 2 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:10:11
Disk Information:
          TOSHIBA MK1653GSX disk0 : (160.04 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    L?KLN (disk0s2) /: 159.18 GB (97.69 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS21N
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.avast.PacketForwarder          (1.4 - SDK 10.9)
          com.avast.AvastFileShield          (2.1.0 - SDK 10.9)
Startup Items:
          HP IO: Path: /Library/StartupItems/HP IO
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.avast.init.plist 3rd-Party support link
          [System] com.avast.uninstall.plist 3rd-Party support link
          [System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] com.sibelius.sari.plist 3rd-Party support link
Launch Agents:
          [System] com.Affinegy.InstaLANa.plist 3rd-Party support link
          [System] com.avast.userinit.plist 3rd-Party support link
          [System] com.hp.devicemonitor.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.avast.home.userinit.plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
User Login Items:
          Mail
          Opera
Internet Plug-ins:
          AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 3rd-Party support link
          CouponPrinterPluginMac1.0.0.7: Version: CouponPrinterPluginMac 1.0.0.4 - SDK 10.7 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 3rd-Party support link
          SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          CouponPrinter-FireFox_v2: Version: 1.1.10 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
          Move-Media-Player: Version: npmnqmp 071503000004 3rd-Party support link
          fbplugin_1_0_3: Version: (null) 3rd-Party support link
          npBcsMcTcIO: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
          avast! Preferences 3rd-Party support link
          Flash Player 3rd-Party support link
          Growl 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          Epson Printer Utility 4:          Version: 9.17 - SDK 10.5 3rd-Party support link
                    /Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
          HP Device Monitor:          Version: 2.7.0 - SDK 10.5 3rd-Party support link
                    /Library/Printers/hp/hpio/HP Device Monitor.app
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Time Machine not configured!
Top Processes by CPU:
               3%          WindowServer
               1%          EtreCheck
               0%          com.avast.fileshield
               0%          airportd
               0%          aosnotifyd
Top Processes by Memory:
          53 MB          Opera Helper
          39 MB          Opera
          23 MB          Finder
          23 MB          WindowServer
          20 MB          EtreCheck
Virtual Memory Information:
          33 MB          Free RAM
          637 MB          Active RAM
          611 MB          Inactive RAM
          278 MB          Wired RAM
          1.49 GB          Page-ins
          5 MB          Page-outs

Installing CleanMyMac will corrupt your system. I know of no way to recover from its effects other than to reinstall OS X and other essential software. "Essential" is defined to specifically exclude CleanMyMac as well as all similarly ill-conceived "cleaning" products that are likely to have similar effects. Never install such junk on a Mac.
Erasing your Mac will have the benefit of eradicating it, the useless Avast garbage, and Internet Plug-Ins as well.
You are likely to need more memory. 2 GB is barely sufficient to run any OS later than Snow Leopard. Your MacBook can address as much as 8 GB and I recommend at least 4 GB.

Anyone else finding iCloud to be less than stellar?? It is slow and scrolling through my mail is absolutely painful.

Hi everyone - I've been an Apple fan for a very long time. Had one of the original iMacs. I have found iCloud to be one of the worst products that Apple has put together and am ready to discontinue the service. Just today I could not even get to my mail from my work PC. Scrolling through email is slow and "sticky" for lack of a better word. Is anyone else experiencing this with iCloud?
Thanks.
Liz

Glad you found a solution on your own! Your predicament sounds like an IP address conflict: your Mac and your iPhone competing for the same IP address in your DHCP lease; your router can satisfy one, or the other, but not both at the same time. Happened to me, and I had to renew the DHCP lease from System Preferences/Network while trying to connect both devices to the Internet at the same time; no more problems since then, but it all depends on the way your router handles simultaneous requests to the Web.

Multiple (but separate) domain problem & Apple's slow and useless response

I am having problem with multiple (but separate) domain. I opened a ticket.
Here is Apple's slow and useless response and my follow up.
This follow up is not going to resolve the issues I am having. The sites are not in one domain file. I have split them into separate domains. I found that the simplest change to any page made the publishing process extremely and reasonably slow. If I updated a single site, iWeb republishes the whole conglomeration; hardly the most efficient way.
I have several directories under the ~/Library/Application Support/iWeb/ directory with separate Domain.sites2 files for each site:
consultingAM.com
DarkAssassinMovie.com
Fuzzy Llama Junior Optimist Club
GulfportOptimist.com
OptimistView
pAwesomeProductions.com
www.nfdoi.com
With the previous version of iWeb, I navigated to a specific ~/Library/Application Support/iWeb/ directory, selected the Domain.site file, and opened it. This would open iWeb with the selected domain. Several of the sites have their blog page with the RSS subscribe option.
Once I made the update, all I usually had to do was publish site and all was well. Occasionally, I would have to do a publish all if I changed domains. All in all, I had no problems with publishing once I found the right steps to be able to maintain multiple domains.
Now, using the default publish or publish all process, all I get is the last site I published. In order to get things semi-functional, I published a site, then I would go to iDisk/Web/Sites/ directory, select the folder name for the site I had just published, then copy it or move it to iDisk/Web/Sites/iWeb directory. This was rather slow and I suspect it is not an approved solution, but it semi-worked. My sites are back up, but they are not fully functional.
Is there anyway to get back to using the ~/Library/Application Support/iWeb/ directory (separate Domain.sites file for each site) process to publish multiple sites? If not, is there any way to suck in the various domains back into one? If that is possible, will it take hours to publish the combined 2-3GB like it did with the previous version?
How do I reverse the 'personal domain' process? I do not want to do this at this time. I just wanted to see what the steps were. I have done the first step, but not the second.
I was glad to see some of the changes made in the upgrade (web widgets, maps, html snippets, theme switching), but I am too happy about the changes made by the upgrade process. In the past, I upgraded my Apple related stuff as soon as it came out. Based on this upgrade, that won't happen again.
It took you guys 5 days to get back to me (during which time several of my sites were down) and I do not believe the information you provided is going to solve my specific problems. I am very disappointed with the results of this upgrade. Clearly there was inadequate testing of this product before it was released. I cannot recall seeing the Apple discussion forums with hundreds of topics and thousands of posts within a week or two of a new release. Apple had to upgrade iWeb in the first week, another poor sign.
Apple is beginning to slip back to the pack; all vendors all below average. Apple is getting more like Microsoft everyday. First Apple delays the release of an OS upgrade so they can concentrate on a freaking phone, now you release software that is so buggy it should be classified as beta at best.
Some of the changes/problem I am seeing since the upgrade (in addition to the problems mentioned previously) are:
layout changes; some of my pages no longer look the same; same of the changes are so bad the pages are unreadable
broken photo pages; some of my photo pages no longer work; some of them have no text or pictures
file/page name changes; why would Apple change the location of the files; now my domains are not pointing right location; special characters (like spaces, ampersands, etc.) are handled differently in this version; specifically, I see that spaces are changed to underscores (_); iWeb used to use '%20' for spaces; what was Apple thinking?
broken 3rd party themes; I know Apple is not responsible for 3rd party themes, but you should certainly be aware that they exist
Based on what I am seeing online, most of the people who are complaining about major iWeb issues are not newbies; based on the technical details in the threads, there are clearly some experienced people who are trying to figure things outw. I have lost many hours trying to figure this mess out. I now have to review hundreds of pages to try get things to look and work the way they did before the upgrade. I have had to handle dozens of phone calls and emails from my viewers and subscribers trying to explain the situation.
I googled 'iweb 08 *****' and got nearly 50,000 hits! I think Apple better get in front of this train before it gets run over.
On Aug 19, 2007, at 11:09 AM, .Mac Support wrote:
Dear David,
I understand that you are experiencing an issue viewing some of your websites published in iWeb:
I have examined all of the published pages and they appear to load and function as expected. If you published your website to .Mac, you can visit it either of these ways:
- In iWeb, click the Visit button in the lower-left corner.
- Enter the following URL into a web browser:
http://web.mac.com/daviddawley/
If you have published more than one website, the URL above will take you to the default website, which is the first website listed in iWeb. To visit another website you have created in iWeb, use the following URL format:
http://web.mac.com/daviddawley/iWeb/YourSiteName
Using this form, the web addresses for the two sites you mentioned would be:
http://web.mac.com/daviddawley/iWeb/FuzzyLlamaJuniorOptimist.com
http://web.mac.com/daviddawley/iWeb/pAwesomeProductions.com
To change the default website, simply open iWeb, and in the Site Organizer, drag the desired default website to the top and republish to .Mac.
NOTE: Be sure to give each website a unique name. This will help prevent one website from overwriting another. For further information, refer to the following article:
iWeb: Do not use similar names for your sites
http://www.info.apple.com/kbnum/n303042
If you still experience issues with the website, try the following troubleshooting steps:
WAIT SEVERAL MINUTES
If your website has movies, you may need to wait several minutes after going to the website before the movies are ready to play. The QuickTime Player icon indicates that a movie is still loading.
CLEAR YOUR BROWSER CACHE
If you use Safari, you can clear your browser cache by choosing Empty Cache from the Safari menu. If you use another browser, consult that browser’s documentation if you need assistance in clearing your browser cache.
UPDATE YOUR BROWSER
Make sure you are using the latest available version of your web browser when viewing pages published in iWeb. If you use Safari, you can check for updates by choosing Software Update from the Apple menu. If there are any available Safari, Security, or Mac OS X updates, install those updates and try looking at your website again.
If you use another browser, consult that browser’s documentation if you need assistance in updating the browser.
TRY ANOTHER BROWSER
If you use a Mac, try viewing your website with Safari or Firefox. If you use Windows, try Internet Explorer 6 or Firefox. Firefox is a free download available here: http://getfirefox.com
TRY ANOTHER NETWORK
If possible, try viewing your website from another network or Internet connection. If you can successfully view the website from another network, please consult your network administrator or Internet service provider (ISP) to resolve this issue.
Important: Mention of third-party websites and products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the selection, performance, or use of information or products found at third-party websites. Apple provides this only as a convenience to our users. Apple has not tested the information found on these sites and makes no representations regarding its accuracy or reliability. There are risks inherent in the use of any information or products found on the Internet, and Apple assumes no responsibility in this regard. Please understand that a third-party site is independent from Apple and that Apple has no control over the content on that website.
Sincerely,
Mel
.Mac Support
http://www.apple.com/support/dotmac
http://www.mac.com/learningcenter
Support Subject : iWeb
Sub Issue : I can't publish to .Mac from iWeb
Comments : I was interested in forwarding one of several iWeb based sites to one of my domains. I wanted to see what the steps were. I believe I inadvertently started the process for moving the site to www.nfdoi.com site. I have several sub directories under the ~/Library/Application Support/iWeb directory with separate domain.sites files (now domain.sites2).
I was going through all of my domain.sites files and opening them in iWeb08; then publishing them. Somewhere along the line everything blew up. Most of my iWeb sites no longer function, It appears that every other iweb site other www.nfdoi.com is down EXCEPT the last one I published. I have made a mess of things and would appreciate any help.
Don't work:
http://web.mac.com/daviddawley/FuzzyLlamaJuniorOptimist.com
http://web.mac.com/daviddawley/pAwesomeProductions.com
Works:
http://web.mac.com/daviddawley/Optimist_View/OptimistView.com/OptimistView.com.h tml
========= PLEASE USE THE SPACE ABOVE TO DESCRIBE THE ISSUE BASED ON THE QUESTIONS BELOW =========
1. What version of iWeb are you using to publish to .Mac? iLife 08
2. When did you first notice this issue? After publishing a few sites.
3. What happens, including any error messages, when you try to publish your site?
--------------------- Additional Info -------------------------
Alternate email address : [email protected]
OS Version : Mac OS X 10.4.10
Browser Type : Safari 2.x
Category : I can't publish to .Mac from iWeb
Connection Type :Other
TrackID: 4154168

Just got off the phone with Apple Support. There procedure was the following:
1. Go to the Apple TV, select settings, general and scroll down to reset.
2. Select reset and then select reset all
Apple TV will go through a restart after the reset and you will have to select your network then log in with your network or Airport Express password. You will then have to turn on home sharing and It will then ask you for your Apple ID for the iTunes store and then the password. At this point you may not see your library, because the Apple TV wants you to turn on home sharing on your home computer that is hosting the movie library. Turn off home sharing on that computer, restart iTunes and turn on home sharing again. After this is done you should be able to see you library listed under the computer.
After going through these steps, when I select an HD movie from my iTunes library the movie comes up after about a 5 second delay.
Hope this helps! I am back up for business.

WRT150n SLOW!!! and constantly renewing IP address.

Similar Messages

Maybe you are looking for