WRT160N and Two PS3's

I have two ps3's on my wrt160n router and one will get open NAT and the other will have STRICT NAT, I have tried putting the other one on the DMZ but I get the same thing, is the wrt160n not made to have this type of set-up? here whats connected: two computers, two ps3's, a psp and a ipod, can any help with this? oh! the game this is happening with is Call of Duty Black Ops.

Try to upgrade/re-flash the firmware on your router.
Connect the computer with the Ethernet cable to the router.
Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
Also try to change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.

Similar Messages

  • How can I connect two PS3 to the same Linksys WRT54G correctly

    Hi,
    i'm trying to connect two PS3 to the same routeur without having conflicts. Everytime i try to update my game softwares it tells me error 80710723 or now 8002AD23. I gave the two PS3 different IP adresses, i opened all the ports that Playstation suggested me to open (http://playstation.custhelp.com/app/answers/detail/a_id/241) and gave them different DNS adresses but still they cannot download any software content without bugging the console. I also use a PC, Tablet and Phone with my wireless connection.
    thank you
    -François

    Well in this case the error code (80710723 ) is generated when the internet connection is slow. So you can try the following step:
    # Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page.
    # Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
    # Make the Channel Width to 20 MHz only and Channel to 6, 9, 11..
    #Adjust the following advanced wireless settings:
    ~~ Lower the beacon interval from 100 to 75
    ~~ Lower the fragmentation threshold from 2346 to 2306
    ~~ Lower the RTS threshold from 2347 to 2304

  • Servicing an 'n' MBP with AirExtreme and two PC's with AirExpress

    I want to buy a Time Capsule and set it up using the "n"-only 5Ghz wide band feature so that I can get the best wireless upload speeds possible from my MacBook Pro. However, I also need the network to provide Internet access for two "g" PC's. On top of that I want to connect a PS3 to the internet. I spoke to a Mac Genius yesterday about this and he said that the only way to do this is to buy a gigabit switch and place that between the modem and the AirportExtreme (Time Capsule actually), the Airport Express, and the PS3. Then set up two different networks for the AExt and the AExp.
    My questions are:
    - is this the only and/or best way of doing this?
    - do I really need a gigabit switch or will a slower one do what I want? Gigabit switches seem to be quite a bit more expensive.
    - what would be a good gigabit switch to buy? I'm seeing all different kinds and brands out there and I am finding it a little confusing as to knowing which one(s) is going to work for what I want to do.
    Thanks.

    "The only thing I'm assuming here is that you are using ethernet between the Express and Time Capsule. Is that correct? "
    Yes. That may be where the Mac Genius misunderstood me. My diagram of what I wanted to do didn't indicate that the TC and AExp were connected via an Ethernet cable rather than wireless. Thanks for you help. So, if I could recap what I want to do...
    modem -> ethernet cable -> Time Capsule running at 802.11n only (with "use wide band" on) -> wirelessly servicing -> MacBook Pro 802.11n machine
    Time Capsule -> ethernet cable -> Airport Express running at 802.11g -> wirelessly servicing two PC's, (and apparently my just purchased PS3 - is this right!?) using 802.11g
    Thanks for your help.

  • WRT160N and web page problems

    I have the WRT160N and experience problems with web pages loading. For example, when I use this router there are times when I want to go to Facebook and instead I get some odd MySpace webpage. I've had similar problems when trying to access my local news webpage, it loads some sort of other strange page. This occurs on all computers in my network (3).
    I've tested this using a Netgear and a Belkin router, and have never experienced this problem. Only on the Linksys. The other routers I have are not N so I'd like to try and get to the bottom of this so I can use the linksys. I have the latest firmware loaded on it.
    Any Ideas? 

    The issue I am experiencing has occurred on all three computers in my home. Two desktop computers and one laptap. They are clean from viruses and spyware, I can assure you of that.
    I did try the suggestion of reseting the router, and then re-flashing the lastest firmware. Much to my dismay, this has not solved the problem. I have taken a screenshot to show you.  If you look at the address bar, that is where I am trying to go, but you will see that it did not bring up that page. For some reason it took me to some Microsoft website this time around.
    Any help with this would be greatly appreciated. I really want to get to the bottom of this. 
    ** Edit ** I have noticed that if I go into CMD and run ipconfig /flushdns and close and re-open the browser the problem is corrected. I have used both DNS servers from my ISP and also from OPENDNS, with the same result. Maybe some sort of settings causing problems with the DNS? 
    Message Edited by Schwa83 on 02-24-2010 07:56 PM

  • I have two apple ids somehow, probably from two mobile and two computers - how do I merge them into one account so they all work with iCloud?

    Somewhere, somehow, between two mobile and two macs, I ended up with two apple ids. I figured that this was the root of my problem to syncing. So, I am syncing Mail, Contacts, etc through the one account that I bought storage on this year in iCloud. I want to merge the two accounts, since many of my apps were purchased with my other id. Apparently, Keynote will not merge files since the app was bought with the second id, not the id I am using for icloud.
    What to do??? I read, in the forums, that I am definitely not alone. I always had the id I used for the Apple Store to buy iTunes items, and then apps. The other id, that I am using for iCloud was based on my iDisk id, and apparently I set up as a separate account. The much failed iDisk account appears to be the one that I wish I never got involved with. Should I feel the same way about iCloud. If I cannot merge the two APPLE accounts from the same person (ME!!!), then many dropbox really is the answer for my file sharing needs.
    Please help me decide.

    To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
    Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud too.
    You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
    The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photostream, it does not affect any of your iTunes services.
    To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
    To go back to your question; you cannot merge accounts, but perhaps using one account for iCloud and the other for iTunes will resolve the majority of the reasons you needed to merge to begin with.

  • I can't open iTunes on my brand new Mac!I am getting the message that I am exceeding my limit of 5 computers! Huh, I only have two desktops and two laptops (not counting my new MacBook Pro). I do have an old (discarded) laptop that had iTunes! Help!!

    Hi! I have a new MacBook Pro, but I haven't been able to put iTunes on it even though I have used it for years on my iPhone, iPad, and two Windows desktops and two Windows laptops. I keep getting the message that "I am exceeding my iTunes account limit of 5 computers (not counting my iPhone and iPad, which are explicitly excluded from the count according to the message)". As anyone can see, I only have 4 computers, so I should not have any problems with installing iTunes, but this same message says that I need to deauthorize at least one computer or maybe I have extra authorizations on a computer.
    I can't even find a list or map of the computers on my iTunes account! Please, somebody help ASAP!!!!! Thanks!!!!!
    Murray in Atlanta
    **** cell
    Message was edited by: lmfj20001
    <Personal Information Edited By Host>

        Deauthorize all of your computers and authorize the computers you use.
        http://support.apple.com/en-us/HT6283
      A new Mac comes with 90 days of free tech support from AppleCare.
      AppleCare: 1-800-275-2273
    Best.

  • HT1423 8gb and two 2 gb memory modules in late 2011 21.5inch imac

    Hi is this possible to add one 8gb and two 2 gb memory modules in late 2011 21.5inch imac?

    Thanks
    Actually I have installed one 8gb module on top of my existing TWO 2 gb factory in built modules. System is working fine though everywhere in the internet it is written that iMac mid 2011 ONLY supports maximum of 4 GB module per slot!!! Then how my system is working? Can I install one more 8gb Module?

  • Just updated to IOS 7 and two issues:  First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

    Just updated to IOS 7 and two issues: 
    First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".  I'm not sure what this really means...
    The second issue is when I try to select "Manually Manage Music"
         The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC".  Do you want to erase this iPhone and sync with this iTunes library?  An iPhone can be synced with only one iTunes library at a time.  Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
    So... I don't want to do that, but I do what to be able to Manage my music.  I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
    Anyone have any ideas?

    I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

  • When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

  • My iPod won't sync, and two songs won't download?

    FIRST QUESTION: alright. i'm not exactly sure what happened, so i will list all the possibilities.
    my ipod has been in my bag for... a while. it was in there with a few pens and pencils.
    i was downloading songs from the itunes store this morning and some of them didn't download correctly.
    i restored my ipod to it's original settings.
    here's the problem:
    i plugged my ipod into my computer to sync the new songs i got from the itunes store because well.. they're not on my ipod yet. and when i plugged it in, the following message came up:
    "attempting to copy to the disk "andrea's ipod" failed.the disk could not be red from or written to."
    what does this mean? how do i fix it?
    SECOND QUESTION: i bought a few songs today (as i mentioned above) and two of them didn't work... the box isn't checked in, the words and what not are grey, and they have small grey sign of an exclamation mark next to it. i tried to delete them, but it didn't work, how do i fix it?

    If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
    iPhone and iPod touch: About backups

  • My Ipod touch will not synch all songs in my library - on my windows 8 laptop. Doesn't matter if the songs are checked or not - only some songs will synch to the IPOD. I have multiple devices and two accounts.

    My IPOD touch will not synch all songs in my library. Library is on a windows 8 laptop. Checking the songs does not matter. I have multiple devices (ipod, IPhone 4 and 5, IPad 2) and two ITunes accounts.

    All songs play on the laptop windows 8. The second Ipod touch we have - all songs synch to it and play.
    But the first Ipod touch we bought - only half (or so) of the songs synch. So I assume there is an issue with the newer Ipod touch. The songs not synching are songs I added to the library from CD's.

  • We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers....  How can we combine our purchases to use on all our devices.  We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

    We have a large family, 5 kids and two adults all with iPads, iPhones, Mac Books, Servers....  How can we combine our purchases to use on all our devices.  We have two Apple ID's and sometimes buy multiple copies because of how we are limited...

    Hello Halfback71,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/ht5622
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
    Best of luck,
    Mario

  • We have two apple ID's and two libraries.  My daughter's IPOD is syncing with my library and I need to change this, but I can't figure out how.

    We have two apple ID's and two libraries.  My daughter's iPOD is syncing with my library and we really want to go to just one library--Mine for ease and we can't figure out how to do it.  Please help!!!

    Apple does not transfer content bought with one Apple ID to another Apple ID. Apple will not merge two Apple IDs.
    If most of your content was bought with the Yahoo! Apple ID but you now want the Gmail address for your Apple ID, the trick will be to change the address used for the Yahoo ID with the Gmail address. However, to do that you must first free the Gmail address from that other Apple ID. Use the instructions from Apple to substitute another address that is not used as an Apple ID for your Gmail address in the Apple ID with the Gmail address. Then, when the Gmail address is no longer used in an Apple ID, you can use the same instructions to substitute the Gmail address for the Yahoo address in the Apple ID with the Yahoo address.
    Changing the email address you use for your Apple ID -
    http://support.apple.com/kb/HT5621

  • My wife and I decided to both buy Iphones do I put them both under the same apple ID, or do I create two different apple ID's and two differnt icloud accounts?

    My wife and I decided to both buy Iphones do I put them both under the same apple ID, or do I create two different apple ID's and two differnt icloud accounts? We want to be able to share my itunes library on both our phones and sync our calendars, but I don't want every update and reminder that my wife puts in her phone and I know she doesn't want every reminder I put in my phone.

    What you need to do is both use the same Apple ID for iTunes content, but separate Apple ID's for everything else. So, you keep your existing Apple ID. If not a verifiable email address, you will need to create a new Apple ID for yourself. You also create an Apple ID for your wife, again a verifiable email address. You use the existing Apple ID for all iTunes content. The new Apple ID's for iCloud, iMessage, FaceTime, etc. Here's how to create an Apple ID:
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
    Use multiple devices on one computer:
    http://support.apple.com/kb/HT1495

  • We have two Ipod Touches in the Home and two Ipads. Right now one of the Ipads has a separate user indentity. Can both Ipods be used to use the same library with different user ids's and different passwords.

    We have two Ipod touches and two Ipads in our home. Right now both Ipods are using the same used id and password to access itunes and sync music. But recently both os us have downloaded the Ibooks segment to our Ipads and now the only way to sync the second Ipad for Ibooks is to use the same used id and password. But the problem is that with our two Ipads in the home, we established two separate used ids and passwords one for each. Is there a way for me to still use the second Ipod touch and the second Ipad with completely separate userids and passwords. In other words to share the music library I have accumulated and yet to sign in each with our separate identities. That way the Ipads can sync and the Ipod touches can sync. Is this possible.

    This is to avoid piracy. What could happen is, people could buy music, and give it away for free online. Usually it is then you buy a complete album off iTunes that it will only be available on one device. It is tied to that account, and the device must be registered to that account to listen to it.

Maybe you are looking for

  • Can't Install Java 2 Runtime Environment on Netscape 6.1 (Windows NT) ....

    Dear Colleagues: I would like to help to solve the captioned problem: I was prompted to install Java 2 when I visited a webpage, but the installation/setup went with error and I restart my PC... I can't open my Netscape 6.1 anymoree as Error Message

  • How to implement google search in portal application

    Hi,   I am using  "http://api.google.com/GoogleSearch.wsdl" file to implement google search in portal application. but i am not able to get the search result. how to implement google search. is this "http://api.google.com/GoogleSearch.wsdl" is vaild

  • Travel Expense: Exchange rate error

    Hi All When i try to create an expense record by entering the expense type and other details like amount in USD in Receipt, i get the following  error. "Enter rate USD / AED rate type _ for 01.06.2009 in the system settings" Checked the spro settings

  • How to hide parameters on URL

    Hi, I pass some parameters by URL while changing my BSP pages. How can I hide them so that they would be not visible in browser? Thanks in advance.

  • Entering symbols in GTK programs

    I use the spanish ISO keyboard layout, and I've noticed I cannot enter symbols that require the option key (such as \|@#¢∞{}[]€£) into GTK programs. If I set the swapAltMeta preference to true, I can get them with the command key, while the option ke