WRT160n cannot access via web browser

After i unchecked the acces the router through web browser box and saved setttings now I cannot get back in. I know this was a dumb mistake. I did this so I counld access my web cam. Every time I tried to access the cam the router sign in screen came up. Well now the cam orks but not the sign in screen. Please help. I really don't want to push reset because I don;t remember the settings AT*T told me to change to use the router with their Modem.

Are you getting any error message...?
Are you trying to access the router's setup page...?
If you want to access the router setup page then,Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...If you setup your own password and you don't remember the password then,you have to reset the router.

Similar Messages

Cannot Access IP Web Browser Configuration Page OfficeJet 8600 Plus

Win 7 64-bit
HP OfficeJet Pro 8600 Plus
Wireless Connection
Hi:
The printout of wireless network test page shows IP address for HP Officejet Pro 8600 Plus as: http://192.168.1.104 (The HP Home Network Diagnostic Utility v4.3.0.002 also shows: 192.168.1.104)
When I try to access http://192.168.1.104 with either IE 9 or Firefox 10 I get an error message: "The website is unable to display the webpage"
But, on the same computer I CAN access http://192.168.1.103 HP Officejet 6480 web browser configuration page with either IE 9 or Firefox 10
Why I can't access the web configuration page: http://192.168.1.104
Thanks
FYI: I set the router to various other network modes, channel widths, channels and ssid broadcast on/off, and also removed power from router and printer, reconnected power and restarted computer, all these efforts did NOT allow access to http://192.168.1.104
This question was solved.
View Solution.

On the front of the printer: Setup > Network > Wireless Setup Wizard. Run it.
Next, on your PC, delete all instances of your printer in Control Panel > Devices and Printers.
Finally, re-add the printer this way:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Cannot access my web browser anymore!

Arrrgh! Just typed a whole msge, then think I deleted it by pressing the back button by mistake, so apologies if this has gone out twice! I've had my 'curve 8900', 4 over a yr now & never had any major probs until now. I updated my phone about 3 mths ago, but as I had bn using my (dare I say) iTouch, I hadn't used my web browser. anyhow, whilst out one day, I had 2 use my BB as my itouch doesn't have 3G & my phone froze after clicking on the browser button & a strange msge came up which said "Uncaught exception: java.lang.illegalArgumentException" . I then had 2 do a battery pull 4 my phone 2 work again. I tried again at home, but same problem occurred. I backed up & updated my phone less than a wk ago, hoping this would fix it, but the same problem keeps re-occurring. I've searched the forums 4 about 90 mins, but haven't come across this same msge with any other user! Can any of u bright BB people out there possibly help me with this most frustrating problem PLEASE!???? Waiting in anticipation! Cherry58

I spent 1 minute googling the error message and got 20,300 hits, so there is plenty of info out there.
From a brief reading of a couple of these hits, it seems a battery pull will provide a solution. Now, you mention that you have updated your phone although its not clear from what you have said as to what that means. Please explain. Also if you have updated your os then there might be some apps that are incompatible with the new system. And when you reply, please dont use 1 long paragraph and text speak as it makes it hard to help you.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

I have a new printer which behaves OK except it will not print directly from a web site accessed via Firefox. We do not have this problem if accessed via another browser. Suggestions?

New printer is Brother MFCJ615W. OS is XP. Computer is quite old Dell. Printer also refuses to print pictures from .jpg files - but the fact that I can print direct from web sites accessed via another browser suggests some of the problem is with Firefox. I asked this a few days ago and got an email reply giving me a link to click on - but this only produced an error message.

I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
the funny behaviour of the trackpad/cursor still persists. any suggestion???
thanks again

Setup iCal server accessible to the LAN via web browser

Hello guys,
I am newbie in mac server and I believe there are lots of guys over there that could help me.
Here's my environment:
Software/Server: Mac OS X Server 10.6
Hardware: Mac Mini Server Snow Leopard
LAN/internet Setup:
Broadband -> router -> mac mini server
-> mac users
-> pc users
Now, here's my scenario:
The mac mini is already running (OS is already installed) and act a normal computer usage like internet browsing, doing some documents and so on and so forth. But now, we decided to make the mac mini server as a server(calendar (iCal) server, address book server, web-server). I'm not so much familiar with DNS, DHCP or networking things to make the client computers connected to server.
My main concern is that I want the calendar to be accessible via web browser in our local network (something like this -> http://calendar.company/ or can access via IP address of the server like.. http://192.168.1.20/), in this case Mac and PC users connected to our LAN(router) can able to access and share their our calendar.
Now questions are:
1. How can I setup the mac mini server and calendar server to be accessible via web browser to the mac and pc users?
2. Do I still need to setup DNS and public IP for my server?
3. Where can I get a step by step tutorials that I could follow?
All recommendations and comments are all appreciated
Thanks in advance,
Emmman

I can't find any clear and step by step instructions with my concern. I am not expecting this to be easy(can setup even non-IT) as apple advertise but as I am reading the documentations I notice these things to be properly setup:
1. Functional DNS system. - This is a high level networking Stuff(Non-IT can't even understand it).
2. IP addresses, reverse IP's etc - Non-IT can't even understand it
3. Router Configurations - Non-IT can't even understand it.
and so on and so forth.
We, the newbie on mac server just need a clear and step by step scenario on how to setup the whole thing.
Thank you.

I Pad email access using web browser

I plan to give my I Pad I 3G to my wife and purchase a new I Pad 2 for myself. My wife wants to use the I Pad I Wi-FI for internet access and not purchase a paid subscription for a data plan. She has a mobileme paid account on her IMac. When she tries to access her email on the I Pad 1 via mobileme using a web browser, the IPad will not allow her to do this; it keeps bumping her to a page that says requires a paid account. She already has a mobile me paid account and should be able to access her me.com mail via web browser as she does from other computers when traveling away from home. Please advise.

Your email account was hacked, that's what happened, & it happens all the time. Change your password...use at least 10 characters...a combination of upper/lower case...numbers & characters.

Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. Hoy can I go back?

Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. How can I go back?

Sorry, you cannot downgrade iOS software.
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem.

Cannot open application, web browser(default nokia...

hello everybody..
I want to ask about my phone nokia 5130c xpressmusic.
I have some problem in my mobile.
I cannot open application, web browser(default nokia), radio, and music player.
How to solve that problem?
thank you for your answer and attention.

What does it say if you want to open the application? I think you should restore the factory settings!!!! If it doesn't work then update your software!!!!
Alif

Error: "Cannot access the web server" with BlazeDS Turnkey

Help! I'm new to Flex and BlazeDS and Eclipse. I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro).   I am NOT using the Eclipse Flex plug-in. I'm using Flex Builder for the Flex code.
Here's what I've done:
I installed BlazeDS and tested http://localhost:8400 - That worked.
I setup Tomcat in Eclipse. - That seemed to work.
I created a Dynamic Web Project in Eclipse - That seemed to work.
I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
<destination id="HelloWorld">   <properties> <source>HelloWorld</source> </properties> </destination>
When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
Now when I bring up http://localhost:8400 I get:
      Directory Listing for /
      Apache Tomcat/6.0.14
My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds). According to Eclipse the server is running.
My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
     My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
     Root URL: is http://localhost:8400/ReportGenTool/
     Context root is: /ReportGenTool/
Any idea what might be wrong? What didn't I configure that needs to be configured?
Thanks in advance.

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

Cannot access acrobat web capture facility too busy

Hi, i
have been using adobe acrobat 9 (part of creative web suite cs4) to convert webpages to pdf's. I now get a message to say that 'cannot access acrobat web capture facility too busy. I have reinstalled the software and ran the repair tool in acrobat after reading similar issues on the forum. It still hasnt fixed it. Any ideas??

I don't know what happened to acrobat V9 - I have the same problem - sorry I am at a loss?
Ron

Cisco 1262 AP cannot access via cosole and GUI

Hi,
I have a Cisco AIR-LAP1262N-E-9 but I cannot access via console and GUI. Also, I noticed that after getting IP address from DHCP server, its IP address will be released after 2minutes. Then after a while, the access point will get another new IP address. And this happens repeatedly.
Hoping for some help out there...
Thanks,
shawn

Hi Manas,
Thanks for your comments.
I have a WLC 5508 controller. I just want to have a basic setup for my upcoming project implementation. On my test bed, I have WLC, 2 sets of AP, and PoE L3 switch. The L3 switch serves as a DHCP server to APs. I manually set the Management Interface IP address of WLC in the same VLAN of the DHCP scope for AP just for basic connectivity. Upon powering up the APs, the WLC detected the APs. However, after 2-3 minutes, the WLC cannot detect anymore the APs. I also notice that the APs are getting their IP address to DHCP server but it will release after sometime..may about 3minutes. Then the APs will get again IP address and will release it. And this happens continuously. I just wish to hard code the IP settings to APs via console but I cannot access it.
Hoping for your help and thanks in advance.
Regards,
Shawn

Copying Events in iCal via Web Browser

How do you copy an event on iCloud (via web browser) from one day to another.
For instance, I have some recurring events that get added to my calendar, but they are not in a predictable schedule (so I can't use the recurring controls).
Do I have to add those in manually every time? Is there an upcoming release that will allow copying of events to another time/date on the calendar using a web browser?

I too would like to know how to do this (copy an event on the iCloud calendar).
Google Calendar provides a nice copy/duplicate feature. Why can't Apple provide the same functionality?

Firefox 9.0, I cannot access Netflix web sight, but I can access it with IE, tried clearing cache & cookies stil cnnot access Netflix.

I use Firefox 9.0, I cannot access Netflix web sight, but I can access it using IE, I tried clearing the cache & cookies, but I still cannot access it. Help.

Try looking at [[Error loading web sites]] first.

After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari

After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari... I can still makes calls and send txt messages but I can't send iMessages

Settings > General > Reset > Reset Network Settings.

Access via web CCM 5.0

Hi
I have been installed the CM 5.0, after the installation the i try to access via web from other PC with network connectivity ( the ping is OK) but i can not access. I use http://IPCCM:8080/ccmadmin
Is necesary to configure anything in the server before i can access via web??
thank you

doesn't CCM 5.0 use HTTPS (secure http) ?
try this:
https://:{8443}/ccmadmin/showHome.do
see this link for more info:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00806331e7.html

WRT160n cannot access via web browser

Similar Messages

Maybe you are looking for