WRT160N issues - is there any help for us?

I've had a 160N V3 v3.0.02 for about a month.  WEP mode meant never getting a certificate on my wireless laptops and dropped connections.  Laptops are all Windows XP with latest greatest updates, and 2 use G class wireless cards, one has a built in N class wireless card.  WPA2 Personal mode has helped getting authenticated by the router, but access speed goes from 1 to 72 with very little steady state.  All laptops will drop out at least once every ten minutes or so, and my router often doesn't show up in the list of available routers.  It may take 30 mins before the thing(s) can reconnect.  Of course, the only hard wired ethernet connection to a PC is working fine and dandy.  it's the wireless side.
Using Search I can see I'm not alone, and not hopeful there is a solution.  Should i just downgrade to a WRT54G2???  Are they trouble free?  My old one worked fine but I gave it away when I got the N class router.
John
(Mod note: Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 11-29-2009 06:34 AM

Try to adjust the wireless settings on the router...Open the setup page of the router and Under Wireless tab,Change the Network mode to "Mixed"...Change the SSID to some unique name,Channel Width to 20MHz and Channel to 11 and click on save settings..Under Advance Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
As you are getting the IEEE error on the laptop,it is the addition authentication on the laptop.It has nothing to do with the router.You can change the Security to WPA or try the following steps ...
Click on the Start button >>Control Panel >>Network Connections- Here right click on the "Wireless Network Connection" icon and select Properties- Click on the 'Authentication' tab- Uncheck "Enable network access control using IEEE 802.1x" and click on Ok.  

Similar Messages

  • Is there any help for a cracked iphone after dropping it?

    is there any help for a cracked iphone after dropping it?

    If you have the new AppleCare+ service, then yes:
    http://www.apple.com/support/products/iphone.html
    Otherwise, maybe. Regular AppleCare, if you have it, can't help you. But you might still be able to get it repaired – of course, any repair will cost you. Apple will replace a damaged iPhone for a flat fee.
    800-MY-APPLE (800-692-7753

  • Help help help help. I just mistakenly deleted a Note from the Note App that I need.  I don't use iCloud. The only place I have the Note app is on my iPad and my iPod. What can I do? Is there any help for this?

    Help help help.
    I just deleted a note from the Notes App form my ipad3. I don't use iCloud. The only place this note was is my iPod and iPad. Is there any possible way to recover this note?????
    Thanks in advance

    Thank you sberman, yes the first thing I did was check my iPod. Instant synching works great between the iPad and iPod, so it was deleted there as well. On both devices I have my Notes account to the same account.
    I ashamedly have not synched to iTunes for ages. After I calmed down I realized that most of the info on that deleted Note I had copied and pasted from an excel file in November. I'm in the process of doing that again, and am only out the recent info.

  • Is there any help for ALV report development with  funcation modules?

    Hi,
    please tell me any help or example to understand the ALV function module.

    Hi neha,
    1. very simple alv
       (with minimum code)
    2. just copy paste
    3.
    report abc.
    TYPE-POOLS : slis.
    DATA : alvfc TYPE slis_t_fieldcat_alv.
    DATA : alvfcwa TYPE slis_fieldcat_alv.
    data : begin of itab occurs 0.
            include structure usr02.
    data : end of itab.
    START-OF-SELECTION.
      select * from usr02
      into table itab.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
        EXPORTING
          i_program_name         = sy-repid
          i_internal_tabname     = 'ITAB'
          i_inclname             = sy-repid
        CHANGING
          ct_fieldcat            = alvfc
        EXCEPTIONS
          inconsistent_interface = 1
          program_error          = 2
          OTHERS                 = 3.
    Display
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          it_fieldcat   = alvfc
        TABLES
          t_outtab      = itab
        EXCEPTIONS
          program_error = 1
          OTHERS        = 2.
    regards,
    amit m.

  • Is there any Help for video from iPhone3GS?

    Can anyone please tell me how to get the video from my iPhone3GS to transfer upright?  All videos sync sideways. 
    Is there anything I can do to fix this?
    I still have the videos on my phone and can sync again if necessary.
    Please help.

    If you have the new AppleCare+ service, then yes:
    http://www.apple.com/support/products/iphone.html
    Otherwise, maybe. Regular AppleCare, if you have it, can't help you. But you might still be able to get it repaired – of course, any repair will cost you. Apple will replace a damaged iPhone for a flat fee.
    800-MY-APPLE (800-692-7753

  • Is there any help for this..

    Hello friends,
    I am not getting any answer from the experts of oracle. Why I don't know?
    I am asking a simple question realted to forms. I want to keep my form 'always on top' of other running application in windows for a specific requirements. How to do this?
    If anybody know, then please let me know. If YES, then how?
    If NO, then Why?
    regards,
    Praveenkumar Talla (Pune, India)

    Hello Praveenkumar,
    an answer (that I'm not sure if will fit your need) could be the following:
    open your form, look for the Window you want to keep always on top, and set the property 'Window Style' to 'Dialog box'. When it's defined as 'Document', your window stays inside the window that Forms Runtime open.
    Hope this help, although I'm not sure if this will help you.
    Best regards,
    Franklin Gongalves Jr.
    [email protected]
    Hello friends,
    I am not getting any answer from the experts of oracle. Why I don't know?
    I am asking a simple question realted to forms. I want to keep my form 'always on top' of other running application in windows for a specific requirements. How to do this?
    If anybody know, then please let me know. If YES, then how?
    If NO, then Why?
    regards,
    Praveenkumar Talla (Pune, India)

  • Is there any help for new iWeb users?

    the tutorials I've found are inadequate for the most basic web site design and editing. I would like to do simple things like changing fonts, linking pages but there is nothing. Help

    Here are a series of video  tutorials by Apple: Apple - Find Out How - Web - iWeb.  And here's the iWeb manual in PDF format: manuals.info.apple.com/en/iWeb_Getting_Started.pdf.
    This is an illustrated Manual from Bowling Green University:
    www.bgsu.edu/downloads/cio/file85786.pdf.
    and this is Apple's manual:
    manuals.info.apple.com/en/iWeb_Getting_Started.pdf
    OT

  • Is there any hope for mac user

    i got the zen vision m 30 gig for xmas and just this week i got a mac computer... i tried to load the software to the mac but i think that since its for pc that i cant use it.. is there any help for me...
    tom

    Hello kpratta,
    There is some hope. I have heard of someone putting the ipod in a bag of dry rice and putting the bag in a dark place for a 4-5 days. After that they used this:
    www.apple.com/support/ipod/five_rs/
    This has the best chance. The rice absorbs any liquid in the ipod.
    Hope this helps.
    ~Julian

  • I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

    I'm new to SQL Server Integration Services and I need help on how to begin learning SSIS. Is there any training for it besides msdn?

    Check this thread where people have already given their suggestion on learning SSIS
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f2cc1cf3-204d-454a-a189-47df87a3aa23/i-want-to-learn-ssis?forum=sqlintegrationservices
    I would suggest to go for You tube videos (type learn SSIS or begin SSIS step by step) you will get lot of good tutorials to start with.
    Happy Learning!!
    If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".

  • I cant find the end button when i receive a incomming call please help me. Is there any solution for it or is it a bug in the ios7.0.3 iam updated with ios7.0.3

    I cant find the end button when i receive a incomming call please help me. Is there any solution for it or is it a bug in the ios7.0.3 iam updated with ios7.0.3

    Do you mean decline button before picking up the call?

  • Is there any book for troubleshooting issues for basis consultants for beginners.

    is there any book for troubleshooting issues for basis consultants for beginners.

    Have you tried taking a look at the books at SAP press?
    Administration - Books by SAP PRESS
    https://www.sap-press.com/it-management/sap-for-beginners/topic/

  • For this issue Is there any solution in Standard solution or any Developmet

    Hello Friends,
    I have one issue that is
    When ever the forecast is release from DP to PPDS (Monthly - days) of a material quantities should be bucketed into Monthly bucketed quantities and split into day level ( e.g: Product1 1st week 1000ton, 3rd week  2000ton , when it releases system aggregates the quantities and depending upon the product profile and setup time it shold give me result as product1 -3000ton in day 1 and product2 --2000ton on day 2 ...so on) .Standard SAP APO release of Monthly forecast quantity to daily bucket is divided into 30 or 31 days and split the quantities equally( e.g: Product1 1st week 1000ton, 3rd week  2000ton , when it releases system aggregates the quantities and divides in 30 days in a month and split the quantities equally).
    For this issue Is there any solution in Standard SAP or any Developmet is required in APO-DP.
    Pl Through me some lights on me .
    Regards,
    sivaram76.

    Hi
    If you are using u201C/SAPAPO/MC90  for releasing the FCST , I think you can define different Planning Buckets Profiles according your requirement for example according your needs for disaggregation of your FCST. A planning buckets profile contains the periodicities or a subset of the periodicities that you defined in the storage buckets profile.
    Once you maintain the planning bucket profile you can put it in tab Daily Buckets Profile while releasing the FCST.
    It will be nice if you please cross check it its meet you requirement.
    Thanks
    Amol

  • TS4436 hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

    hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

    If you are using the iPhone camera zoom then remember that this is a digital zoom not an optical zoom. The zoomed in area will have fewer pixels and not appear as clear. The more you zoom the worse it gets. It's like cropping a picture after it has been taken.

  • Are there any fixes for iPad 2 with OS 8.1.1.

    Are there any fixes for the iPad 2 IOS 8.1.1?  I've had problems with Safari and other Apps crashing or locking up, and with extremely slow touch response.  These problems have been occurring since the last update.  At times the iPad becomes unusable.  I have been keeping all programs closed and history and web site data cleared.  Thanks for any help you can give.

    Hi, dannilee,
    I have exactly the same problem. The device was my favorite computer until 8.1.1. Now it runs s-l-o-w-l-y, requires endless reboots.
    To improve the performamce, I have tried these:
    1.Go to Setting->General->Accessibility->Reduce Motion. Turn on.
    2.Reset iPad device settings using Setting->General->Reset->Reset All Settings. Its increase iPad performance little better.
    3.Hold the sleep/wake button and home button upto 8 seconds. This will turn off your iPad. Then turn on iPad. Wait few moments. Do the same thing twice to solve this issue.
    Solution 3 worked for me. And, I always recommend you to backup your iPad first before any action to avoid any data loss.
    Hope it is useful for you.

  • Is there any way for a basemap to be manipulated from the client side?

    Hello,
    Essentially, we have a basemap (+basemap A+) that contains boundary geography (i.e., county, tract, block boundaries) and we have a theme (+theme A+) that contains housing unit points.
    The idea is that theme A will be a layer that the user will be able to switch on/off. We know how to do this, but the problem comes in where performance is concerned.
    Previously, theme A was actually included in basemap A, and performance was not an issue, but the problem then was that the user was not able to turn that layer on/off.
    Also I have done everything I know in terms of caching as well as using the mapviewer API
    (e.g.,
    test_theme.setClickable(false);
    test_theme.enableInfoWindow(false);
    test_theme.enableInfoTip(false);
    test_theme.enableLabels(false);
    test_theme.enableAutoWholeImage(true);
    test_theme.setMinVisibleZoomLevel(5);),
    but rendering the theme on the client side is still way too slow (even at zoom level 5).
    So, my question boils down to this. Is there any way for a basemap to be manipulated by a user? I.e., Is there a way for a user to pass parameters to a basemap, essentially telling it which themes to turn on/off?
    I know you can specify which zoom level the basemap's themes are visible, but again, we want the user to be able to have control of when a certain theme is shown or not.
    Thank you for any help you can provide,
    John
    Edited by: user641525 on Mar 18, 2009 10:29 AM
    Edited by: user641525 on Mar 18, 2009 10:30 AM

    What you may try is to replicate your base map but take the point theme out of its definition. Then create a second tile layer for the new base map. You can add both tile layers to the client (but set only one of them to be visible). Then simply switch the tile layers' visibility on/off based on user turning on/off the point theme. The built-in Oracle Maps tutorial #22 (Multiple Base maps) has some sample code you might be able to re-use.
    thanks
    LJ

Maybe you are looking for