Wrt160n Problem to conect wireless ip camera

Hi , I instal a ip camera Insteon everyting work fin on cable but imposible to conect the wireless
my cam device do not detect the network so my laptop do find is that posible the cam device dos not support linksys wifi
ad all my security wpa2 open in the cam setup
what could be the reason my cisco linksys jam the detection of the ip camera ?
thank

Can you access the camera locally?
Are you trying to configure the router for remote access with the camera?
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
settelma wrote:
I just bought an Insteon IP Camera and have the same problem with my EA6500. Whenever I remove the cable I get a DDNS communication error even with port forwarding. The Insteon tech support thought it might be a bad camera and they sent me a new one. I have the same issue with the new camera. The error shows up on the Insteon Camera basic status under DDNS status : Errors in Network Communication. Any advice?

Similar Messages

Wrt160n with Axis 207w wireless wifi security camera

I can't see the linksys wrt160n in the setup of my wireless security camera. I have the router in default settings, with ssid broadcast enabled. I have tried the different settings, with Radio Band Standard Channel Network Mode. But never do I see the router in the setup of my camera. I see all the other routers in the street and have used the camera for years with my 3com wireless-access point. Wired the camera works fine with the router.

You should use a unique SSID name do not use Linksys. Lets say you use Canadian as your SSID When you view wireless network Canadian Secured network should appear in wireless network or profiles for your camera.
It does not matter if there is more than one network showing in the list. It matters that you connect to the correct network.
Greetings from Northern Ontario, Canada

Hi I just purchased a WVC54GCA wireless video camera I am having a problem with the setup software

I just purchased this wireless video camera and I am trying to set up the wireless key. I have put in the SSID and then the option of WEP (128 bit) or 26 character key. I then try to input the 26 character key and the text box can't take that number so I am supposed to click next and enter the key on the next page..... only it is at the last page where you would save the settings and I don't see anywhere to edit it. I know I get a bit hurried is there something I am missing?? I would appreciate any assistance you can offer. Thanks a ton

If you are trying to configure your Camera using the Setup disk, you can exit from the setup and configure all the settings on your Camera Manually.Follow the Instruction below to Configure your Camera manually..
1. Connect your Camera to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on Ok button to Save and Click on "Close" on main Properties window...
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.115.
Use admin for both Username & Password in lower case...It should open your Camera set-up...
3. Once you get to the set-up page you can follow this link to change the Camera Settings...While changing the Camera settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(router and camera)...Also make sure to change the camera's default IP to match your network and Gateway Address should be your router's address...ex. Camera's IP Address : 192.168.1.115(assuming your router's default address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1.
4. After configuring the Camera you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Camera from the computer and power cycle both the devices(Camera and Router)...Your camera should be configured...
In case if you don't get the Camera set-up just leave it connected to your computer and reset it for 30 seconds...
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Camera, wait for 30 seconds and re-connect the power cable...Follow Step 2, Step 3 & Step 4...
Click Here and follow the instructions to configure the camera with the Wireless Settings.

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update:

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update - I was anxious to download the update to see if it addressed the sticky trackball problems and the low volume issue when using a blue tooth device. However, in the process of updating my BB Tour yesterday, the install stopped on the 8th out 12 updates. After a couple of 'retrys', the BB error message on the desktop came up which instructed me to: i) disconnect the device, ii) restart the computer. iii) restart the loading process and, iV) restore my data by loading the loader back-up file using Restore. Unfortunately my Tour was left without any software and the Desktop manager couldn't recognize it. The error message on the Tour was 503. Called Verizon Wireless tech and bottom line, the only fix is a new Tour, which they're sending me. Anyone else having issues with the update? Also, does it address the trackball and blue tooth issues?

I had issues with the trackball and had to have my Tour replaced. I was told this model does not have a removable trackball so the entire phone has to be replaced. My current one is working OK but does stick a bit. Seems to get worse over time. My wife's tour is newer and so far she is not experiencing the problem. Have not experienced a problem with the Blue Tooth volume.
I have another issue with this upgrade that I am wondering if anyone else has seen. My wife has the Tour as well. She was prompted to do the upgrade and went through it. It appeared to work except it blew out her Contact Alerts. When we put them back in we can no longer get the sound to play when she receives an SMS message in her holster. Vibration works but doesn't do any good when it is in her purse. Phones calls, calendar alerts, alarms all work in holster. As soon as we delete the contact alert the default SMS alert will play in the holster. If she takes her phone out of the holster the Contact alert will play. My phone is still running 4.7.1.40 and this function works fine. I am thinking about trying to put her's back to my version if possible but not sure the best way to go about this

LAN IP keeps changing on my wireless internet camera using Linksys E1200 router

Although it was working fine for about a month the LAN IP for my wireless internet camera now keeps changing almost on a daily basis for no apparent reason. I am currently away from home and am unable to access the camera for live coverage until I determine and reset the IP. Fortunately the camera is working and still sending emails on motion detection which includes a note with the IP which I then can use remotely access my local computer and then to the camera for live coverage but this is a time consuming method. To be able to get access from my current location I then have to remotely log on to my home E1200 router and change the address in the port forwarding section of the routers setup program in order to use the new IP directly.
I know I could have avoided this problem by seting up the camera with a static IP but for some reason I had a problem doing so and due to time limitation I ended up accepting the dynamic IP assignment.
What could be causing the change and more importantly is there anything I can do to the router setup to minimize the problem?

There hasn't been a power failure at my house in over 3 weeks at least none that my UPS system has sensed but there have been many camera IP changes during that perioid . Perhaps there has been some local power interuption to the camera or the router. I wonder if a local power sag or surge might be sufficient for the camera to restart. I guess further investigation will have to wait til I return and regardless of what I find I'll switch to a static IP for the futrue.

Trouble setting up a wireless IP camera

I have a Foscam wireless IP camera that I got working easily. I just bought a new GOING model IP camera and am having problems. My AirPort network's IP is 10.0.1.1. When I got the Foscan, I just ran IP Camera Tool and the cam showed right up. From there it was easy to set up. Now this new cam does not show up. I emailed them and they said the default IP for the cam is 192.168.1.10, They told me to add a 192.168.1.x address to my Mac. How can I do that? I see you can change DHCP range in Network options, but won't everything on my network stop working? My Foscam cam is on 10.0.1.4. The web server running on my Mac is at 10.0.1.5 and my Apple TV is at 10.0.1.13. What options do I have here?

Make sure the correct encryption mode is supported. Many times people confuse the different encryption types. Best bet is to not have any encryption set on your router and see if that works first.

Get a wireless ip camera to work

Can anyone give me a STEP BY STEP instruction on how to setup my router (WRT160N) to enable me to access my wireless ip camera, i set it up in a LAN. i am a new to this, so all and any help would be great.
Thanks

To enable Port forwarding on your Router follow this steps...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab..
On the first line in Application box type in ABC, in the start box type in 85 and End box type in 85, leave the protocol as both and under ip address type in 192.168.1.xx( This will be your Cameras IP address) and check the enable box, click Save Settings once done...

Cannot see Wireless IP Camera via WAN

Router:WRT54GC
IP Camera: Chinese EBAY special
I have a Wireless IP Camera connected to the router. Everything works fine on the LAN.
I can connect from within the LAN using the Camera IP (&port) and the external router IP(&port).
I cannot see it outside the LAN though.
I have forwarded the correct port for the IP of the Camera and confirmed the port is open on the net. (Have tried static and automatically obtained)
I can ping the Routers external IP from the WAN but cannot see the Camera.
Have read every thread on here.
This one was helpful:
http://homecommunity.cisco.com/t5/Wireless-Routers/WRT160N-v2-with-IP-camera-BLC131-CE/m-p/300838#M1...
I couldn't ping the router until I disabled "Block anonymous internet requests" but can now.
Although putting the router ip in a browser doesn't give me remote management (if it should?)
Any ideas?

HI,
My ISP is Virgin Media (I'm in the UK)
My WAN IP is 92.236.14.192 - I can ping that from outwith the LAN. I can also use remote management using it with por t8080 so connectivity is ok.
I've forwarded port 1025 for the Cameras IP - port 80 is already in there forwarded with the routers IP, this must be a default one?
I'll change that and see if it helps.
port 1025 is open, I checked with the "canyouseeme" site.
thanks for your help!

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem with my new camera? Will upgrading elements to a newqer version solve the problem?

NEF's for the D7100 should work with the latest version PSE13
You can download here and try free for 30 days:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

Connecting a wireless nanny cam to iMac - no RCA connection

I have just migrated from the PC to Mac world. I have a wireless nanny cam that I use to record to my PC (like a DVR) by installing in my PC a DVR/PCI card that has RCA input jacks. A receiver would connect into the RCA jacks and thus receive the wireless camera signal. I now use an iMac
Obviously I can't install a PCI card on my iMac and it doesn't have RCA inputs either, so how would I receive a signal on my iMac from a wireless camera? It is not a camera that has its own IP address. I thought that since the latest iMacs are able to pick up wireless router signals for internet connectivity, that it could also be configured for a wireless camera that transmits a signal. Do I have any hope? FYI, the software used to manage the camera recordings is called Pico 2000.

You can use El Gato's EyeTV 250.
It has RCA input so you can hook up your Nanny Cam receiver and record to your HD.
Plus,you can connect your cable TV and watch and record shows on the iMac.
http://www.elgato.com/index.php?file=products_eyetv250&PHPSESSID=11d96ee451639d4 dd7739ef8b971a5ea
Jim
P.S. Welcome to the Discussions.
PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM Mac OS X (10.4.8)

The problem related to wireless service Wi-Fi connectivity Never work properly

Hi
i am bashair from KSA
I have iPhone 5, you update your iPhone to version 6.1.3
The problem related to wireless service Wi-Fi connectivity
Never work properly, you try Method posed but did not succeed..
i need help me please
thanks..

UPDATE
Hey this is totally weird. I haven't done jailbreak at all and I won't But how is possible that default apps such as Safari and Appstore have the problem I've mentioned before and Skyfire works perfectly without any trouble.
So to sum up:
Safari: loading stucks after few seconds on wi-fi, mostly doesn't load pictures
Appstore: loading stucks after few seconds on wifi and it keeps saying "loading"
Facebook and Youtube: doesn't load pictures
SKYFIRE: loads everything without any trouble
and completely everything works on Edge...
So tell me W.T.F. :-D

Wireless Network Cameras

Can anyone explaing to me step-by-step, how to attach a wireless video camera to my network and have my Mac recognize it. I just returned to amazom.com my Linksys wvc54g cause mac won't recognize it. I would like to use Evocam or Security Spy, or IveZeen in order to record wireless video.
Is anyone out there knowledgable about this keeping in mind that most of us are novices at networking. I set up my Linksys router to my Airport extreme card in my G5, and it's working fine. Only, I want to purchase a wireless camera, ( a D-Link 900W I hear works).
Any help here would be greatly appreciated. I have been using Macs since 1984 so I am a little familiar with all the other aspects of my G5.
Thanks in advance for your replys.

I googled "wireless network camera for mac" and came up with, among others, this:
http://www.google.com/products?client=safari&rls=en&q=wirelessnetwork+cameras+formac.&oe=UTF-8&um=1&ie=UTF-8&ei=U6SSaWaOorhtgfN0oVR&sa=X&oi=product_resultgroup&resnum=1&ct=title
You can do the rest...

Wireless security cam

hi,
I am planning to install several wireless security cams at home, and the one from linksys seemed a good choice to me.
I am looking for a specific feature that I am not able to find any explanation on. In the features I see that I am abe to watch live immages remotely, and record those live images. What I am also looking for, is that the system can automatically takes and record immages, even when I am not connected to the cam. assumethat there is a stranger in our house, I wantthose images t be recorded at a later stage so that I can see who has been there.
Is that possible with the linksys cam?
Many thanks in advance.
Best regards,
Koen

Yes,using the motion detection feature on the linksys camera it is possible...Some good linksys camera are WVC54GC,WVC54GCA,WVC80N.

Problems reading other wireless network.

Hello everyone,
I am writing this message because in the last weeks I have been having a problem with my wireless network on my macbook. Every time that I open the computer it reads another network first and not the one that is mine. My other computer, ipad and ipod touch are reading the network that I own, but this macbook is not reading it first. I always have to go to network settings and changes it.
Any advice or help in that regard? I will appreciate it.
Thank you.
Luis

Hi
Go into System Preferences... > Network
Select AirPort from the list on the left and then your usual Location
Click Advanced and select the AirPort tab
Delete ALL networks EXCEPT your own from the list of nearby networks
Click on OK, Apply, etc
Bob

TS3992 am facing a problem whereby my new iPad came up with a message saying that "Not enough storage: This iPad cannot be backed up because there is not enough iCloud storgae available......". In addition to that, I coulnt even press the " close" or " se

am facing a problem whereby my new iPad came up with a message saying that "Not enough storage: This iPad cannot be backed up because there is not enough iCloud storgae available......". In addition to that, I coulnt even press the " close" or " settings" that poped up with the message, and I couldnt use the iPad. It basically just stop functioning for the whole day, I couldnt turn it off either. T.T Does anyone have any idea what should i do??

Welcome to the Apple Support Communities
Hold Sleep and Home buttons until the iPad restarts, so the message won't appear after restarting it

Wrt160n Problem to conect wireless ip camera

Similar Messages

Maybe you are looking for