Wrt160n security log

I have the wrt160n ver 2, and I noticed that after enableing logs it does not show the log in of the console when I select the security log section.

When you click on "View Log" and select incoming Log does it display you any log listed in it. Security Log will only Displays a temporary log of packets that have been dropped by the firewall. If your firewall hasnt droped on any packets then i wont display you anything listed under.

Similar Messages

WRT160N security log (new thread)

I posted this as a reply to an existing old thread on the topic, but not sure if the new post would bring the thread back to the front for visibility ... so trying to jump start the topic.
My WRT160N has the SPI firewall enabled and configured to block anonymous Internet connections, and it appears to be working (I've run different online scanners like Shields Up and they all seem to indicate that the port connection attempts to my Intenet IP address are being blocked). But nothing shows up in the security log ... ever. Shouldn't these blocked attempts be recorded there?
BTW, the router firmware is at v1.02.2 ... kind of bummed that I just bought this and I get a unit with apparently the last update to an old firmware build. :-\
Thanks in advance for any feedback.

"I beleive the security log of the scanner on your computer will only tell you the firewall on the computer not on the router... "
Sorry, not sure I follow ... I am speaking about the firewall on the Linksys router and its security log. The router firewall appears to be doing its job and not letting anything thru (so my computer ... hopefully ... isn't seeing it), but nothing from my testing is being recorded in the router log.

System and security logs

1. Login, Clear Logs and log off events in Windows 2003 when does this happen and what are the IDs for
these events ? what is the system login?
2. In an event when administrator account and password are shared by more than one person, is it is possible
to prove who cleared the security logs?
3. If there is no keyboard monitoring is there a way to prove from which PC the delete came from?
4. Can a schedule a task be run in advance to delete the security logs at a later point of time in Window
2003 using utilities like WMI, powershell etc?
5. In Windows 2003 servers, Microsoft allows 2 remote connections and 1 console session also called session
0. What is session 0 ans when is this launched?
6. Can security and the system logs on the server be deleted remotely from any other server in
windows 2003 if the account has admin rights? Please comment if firewall setting needs to be enabled in window 2003.
dhomya

1.) If you enable auditing here are the events
https://technet.microsoft.com/en-us/library/cc787567%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
2.) Probably not unless you know who was at what console at what time.
3/4.)
http://blogs.msdn.com/b/ericfitz/archive/2007/08/10/help-someone-has-deleted-events-from-my-windows-event-log.aspx
5.) http://support.microsoft.com/kb/278845
6.) See 3/4
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Unable to receive an email by task scheduler on audit failure in windows server 2008 r2 security log

Deal All,
I am sorry in advance if i would be on wrong forum, i have created a task on Server 2008 r2 Domain controller that when an audit failure event triggered in windows security log then an email should reach on my email ID, but unfortunately, nothing happen
on audit failure.i receive no email from task scheduler.
kindly suggest me to resolve the issue. I have created Email task on event ID 4771.
Thanks.
Zeeshan Ibrahim Network Administrator

Hi Zeeshan,
I have found a hotfix against the same error messages, though it applies to Windows Vista and Windows Server 2008, I am not sure if it will work on your machine.
Please refer to this KB article below:
Duplicate triggers are generated incorrectly in scheduled tasks in Windows Vista or in Windows Server 2008
http://support.microsoft.com/kb/2617046
Please feel free to let us know if this hotfix couldn’t help you fix this issue.
Best Regards,
Amy Wang

Only one Server Audit can write to Security Log

Hi,
I have a problem when i want to enable a
second audit server to security log...
Permissions are right, the first Audit Server works fine but when i enable the second i have the 33204 error.
(SQL Server Audit could not write to the security log.) its strange...
I used Process Monitor tool from Sysinternals to debug the ACCESS on the Registry Key HKLM\SYSTEM\CurrentControlSet\Services\EventLog\Security but there is not difference when i enable the first Audit Server or the second...
I am not the only person who has this issue, i see that in other places...
Can you help me?
Thanks!
Regads.

Have you granted access to the new service account via secpol? This may be the root cause for this problem. For the detailed instructions please visit:
http://msdn.microsoft.com/en-us/library/cc645889.aspx.
BTW. I would strongly recommend using secpol.msc to manage the local security policy instead of modifying the registry keys directly.
Please let us know if this information helped
-Raul Garcia.
SQL Server Security
This posting is provided "AS IS" with no warranties, and confers no rights.

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

Hi
Secure Zone login feature will only work if you host your website with Business catalyst.
Please take a look to this as an alternative
Password Protect Pages Widget for Adobe Muse
Also, check this thread,
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

WBEMTEST doesn't give Security logs

Hi,
I did a WMI test and queried to see the security logs. Nothing found. I see only Application and System logs. No security logs were found.
I used the below query.
select * from win32_ntlogevent
Thanks in advance.
Rajiv,
Technical Support Engineer.

On Windows Server 10 TP, I don't see the same behavior you describe...
Get-WmiObject -Query 'select * from win32_ntlogevent' | group -Property LogFile -NoElement
Count Name
1140 Security
    1 System
   24 Windows PowerShell
Hope this helps, Martin

System, Firewall,Secure logs

I need some help with trying to understand the logs and whether they can be safely deleted. The only problem is I am unable to figure out what these logs do or how to delete them. Some are labeled some what oddly. I have run the maintenance scripts, but have no idea how to tell if they are working.
I would like to clean up the logs that are using disk space. Some are rather large, but none are over 2.2mb
Secure.log.0.bz2
secure.log.1.bz2
secure.log.2.bz2
System.log
system.log.0.bz2
system.log.1.bz2
system.log.2
system.log.3.bz2
appfirewall.log
appfirewall.log.0.bz2
appfirewall.log.1.bz2
appfirewall.log.2.bz2
appfirewall.log.3.bz2
appfirewall.log.4.bz2
appfirewall.log.5.bz2
When I click on the logs in the console the trash icon is greyed out. Some of the logs light the trash icon up. Any advice or help would be appreciated.

AFAICT, you can't delete any listed one via the Console app because the belong to the system. Leave them be, they'll get removed when appropriate by the daily maintenance script, if your machine is awake overnight. If not, run this command in the Terminal app:
*sudo periodic daily*

Windows 2008 member server, repeating event 4625 in the security log

Hello,
   I'm having an issue with a member server on our 2008 domain, security log is filling up with event 4625, here are the details:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          4/23/2014 2:04:42 PM
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      my.member.server
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason:  Unknown user name or bad password.
Status:   0xc000006d
Sub Status:  0xc000006a
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: -
Source Network Address: 10.0.0.115
Source Port:  51366
Detailed Authentication Information:
Logon Process:  Kerberos
Authentication Package: Kerberos
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-a5ba-3e3b0328c30d}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-23T18:04:42.197Z" />
    <EventRecordID>99893119</EventRecordID>
    <Correlation />
    <Execution ProcessID="744" ThreadID="844" />
    <Channel>Security</Channel>
    <Computer>KLINEWEB.kline.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">
    </Data>
    <Data Name="TargetDomainName">
    </Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2313</Data>
    <Data Name="SubStatus">0xc000006a</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">Kerberos</Data>
    <Data Name="AuthenticationPackageName">Kerberos</Data>
    <Data Name="WorkstationName">-</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">10.0.0.115</Data>
    <Data Name="IpPort">51366</Data>
</EventData>
</Event>
The IP address that appears in source network address all belong to VPN clients. And it looks like its only happening with 4-5 IPs, all of which are VPN clients. These clients shouldn't be connecting to anything on this server, which is why its puzzling.
Our DC is Windows 2008 and the VPN server is another member server on the domain. I suspect the issue is at the client PCs since there are many other VPN clients connected that don't generate the event ID.
Can anyone tell what the issue might be?
Thanks.

Hi Rayminette,
There are multiple login sources that could possibly be generating the errors:
FTP logins - check your FTP log to see if login failures are showing up at the same time.
Logins via Basic Authentication over http or https (simple, but possibly dangerous, way to password-protect a web site).
ASP scripts.
This logon type 8 indicates a network logon like logon type 3 but where the password was sent over the network in the clear text. Windows server doesn’t allow connection to shared file or printers with clear text authentication. The only situation
I’m aware of are logons from within an ASP script using the ADVAPI or when a user logs on to IIS using IIS’s basic authentication mode. In both cases the logon process in the event’s description will list advapi. Basic authentication is only dangerous
if it isn’t wrapped inside an SSL session (i.e. https). As far as logons generated by an ASP, script remember that embedding passwords in source code is a bad practice for maintenance purposes as well as the risk that someone malicious will view the source
code and thereby gain the password.
Reference from:
What is the source of thousands of 4625 Logon Failure errors with Logon Type 8 (NetworkCleartext)?
I hope this helps.

Firefox will not open a new, secure log-in page, on my bank's site

My Bank's website opens a new, secure, log in page from a link on its home page. When I click on this link to do so, nothing happens. No window opens and Firefox does not give any messages as to why. It used to work, but has stopped in the last couple of months. I don't know if it something in my settings or not. I also use the Flock browser - which is based on the Mozilla code and the link works in this browser. Settings in both browsers appear to be the same.
== URL of affected sites ==
http://banksa.com.au

I get the login window in Firefox.
It uses javascript to open the window. Try hitting control-F5 - that will reload all the scripts in case one is corrupt in the cache.
Do you have any add-ons that might block scripts? Adblock Plus, No Script, ...
If so try disabling them.
Try safe mode
[[Safe Mode]]
Also see
[[Basic Troubleshooting]]

Permission Report (secure.log & ALRHelperJobs)

Hi, I usually ignore permission reports since after I repair them I get "Permissions repair complete". First, does "Permissions repair complete" mean they were repaired or not?
But I would most importantly like you insight on the following:
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Permissions differ on "Library/Application Support/Apple/ParentalControls/ALRHelperJobs", should be drwxrwxr-x , they are drwxr-xr-x .
thanks!

Hello,
Run Disk Utility one more time and Repair Disk Permissions. When it's finished, make sure at the end of the report it says: Permissions repair complete Then you're good to go! All done.
Carolyn

802.1x WLAN auth not showing client ip in win 2008 AD security log

Hello.
I have a ongoing project configuring a cisco wlan with 802.1x, where microsoft network policy server is used for radius authentication.
Configuring the SSID on the WLC, and the 802.1x on wlc/radius server works fine, users type in their username and password on a smartphone/ipad etc and get access to the network.
The problem im facing is that I want to log the clients ip-address on the radius-server security log, so I can use cisco active directory agent to find the ip against username mapping in ironport.
The active directory agent checks the domain controllers security log to see what ip-address belongs to which user. In this scenario the user is mapped to the wlc ip, not the smartphone/ipad. The result is a lot of users mapped to the wlc ip-address, and the logs in cisco ADA/ironport is worthless.
Is there any way to configure wlc/802.1x to send the actual client ip-address to the authentication server, and not the WLC?

Please configure radius accounting on the WLC to have the required logs on the NPS server.
On the WLC, make sure we have radius accounting server configured under security > AAA > radius > accounting
After that Go to WLAN, edit the WLAN > security > AAA server and enable radius accounting.
Radius accounting on NPS logs
http://technet.microsoft.com/en-us/library/dd197475%28v=ws.10%29.aspx
Regards,
Jatin

Private Secure Log Permissions being changed by someone????

I have been having to repair the permissions on my ibook often. How do these get changed, by who, and what threat is it to me? How much control over my computer can one get????
Below is the repair I just had to make.
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Group differs on ./private/etc/authorization, should be 80, group is 0
Owner and group corrected on ./private/etc/authorization
Permissions corrected on ./private/etc/authorization
Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
Owner and group corrected on ./private/var/log/secure.log
Permissions corrected on ./private/var/log/secure.log
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Mac OS X (10.4.9)

The permissions on the secure.log file are being changed by the weekly cron task, which is being run by Mac OS X itself as opposed to someone accessing the computer locally or over the network.
(21837)

[WRT400N] Several security log entries - every minute

I have several entries in the security log that I have no idea where they are coming from. They are all blank like this:
Incorrect User login : Username is , Password is From 192.168.1.101=> Wed Mar 17 17:42:48 2010
Incorrect User login : Username is , Password is From 192.168.1.101=> Wed Mar 17 17:43:48 2010
Incorrect User login : Username is , Password is From 192.168.1.101=> Wed Mar 17 17:44:48 2010
The only exception are a few on the first day these started appearing:
ncorrect User login : Username is badcred, Password is himom
From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is admin, Password is From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is admin, Password is admin From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is admin, Password is 1234 From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is admin, Password is password From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is , Password is admin From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is , Password is From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is admin, Password is motorola From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is root, Password is From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is , Password is password From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is root, Password is !root From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is Admin, Password is Admin From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is Admin, Password is From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is admin, Password is junxion From 192.168.1.101=> Tue Mar 9 15:04:12 2010
Incorrect User login : Username is admin, Password is cableroot From 192.168.1.101=> Tue Mar 9 15:04:12 2010
SInce I am getting blank entries every minute, I'm curious what would be causing this. The first entries are obvious that someone was trying to access with various passwords.
Solved!
Go to Solution.

Well, if it is your computer it looks as if you have some malware running on your computer which tries to hack into your router... Or did you try those passwords at any time?

2012 DC getting numerous 5152 errors in Security log

I have a DC running Windows Server 2012 (not R2) which has recently started getting numerous failed audit entries in its security log, ID 5152.
The source IP seems to include about half a dozen in use by domain PCs (all Windows 7). The source and destination port varies depending on which PC generating the error, but they do not change with regards to each PC. For example, when source IP is 192.168.1.113,
the source and destination ports for all of the errors generated by that IP never change.
This is a real puzzle. I've seen external logon attempts in the past on other servers when port 3389 was open to the internet. But in those cases the same IP tried different logon names and different ports. In this case, there is no username, nor does the
error even have a place to display a username. It's just source and destination IP/Port, the protocol which is always 17.
Anyone seen anything like this? Any ideas on what might be going on? Let me know if more information is needed.
Jonathan

Make sure that viruses are not behind this behaviour.
Use Process Monitor to make diagnostics.
Regards
Milos
I know what Process Monitor is but have never used it so I have no idea how to use it for this issue.
Jonathan

Wrt160n security log

Similar Messages

Maybe you are looking for