WRT160n speed issue, tech help required please

I'm puzzled. I have a WRT160nV2 just recently purchased. I just noticed that my desktop, which is using a WMP300N-UK, running under WinXP SP3, is connecting to the standard channel as listed in the router's status screen, rather than the wide channel. The Linksys icon in the XP desktop system tray reports signal strength 90% speed 48Mbps. How do I improve on this? (The network is mixed, with other 802.11g devices connected, and is secured with WEP 64-bit hex)

In the router, make sure your Radio Band is set to "wide channel".
Also, some wireless adapters have had difficulty doing WEP at speeds above 54 Mbps. I don't know if the WMP300N has this problem or not, but you might want to try using WPA (= WPA with TKIP), or WPA2 (= WPA with AES) encryption. Ideally, you should be using WPA2, or at least WPA encryption anyway. WEP is not longer recommended because it is too easy to crack, even with a 64 bit hex key.
Also, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
If you still have trouble, download and install the latest driver for your WMP300N.
Hope this helps.

Similar Messages

Help required please. "Itunes can not read the contents of my iphone"

Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description: PC
IP Address: (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers: 10.143.147.147
 10.143.147.148
Adapter Name: {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description: Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name: {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description: Broadcom 43225 802.11b/g/n
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection: PC
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number: 85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

HT4859 Hi - help required please. My kids have locked my iPad and now I need to sync to my computer xcept am on hols and don't have it. Any options? Thanks Darren

Hi there
Hope someone can help me here. I am currently on holidays and my
Kids have disabled my iPad so I now have to sync with my computer.
I don't have my computer handy and want to use my device over the next few weeks
if possible so can anyone help me please
Thanks
Darren

You will have to use a third party utility to extract your iPad and iPhone's music.
Read turingtest2's User Tip:
https://discussions.apple.com/docs/DOC-3991

Font Rendering Issues-Help Required Please

In the past week, any Google search on Firefox or Chrome (but not Opera) gives me results where the fonts look gappy. Sometimes there are additional dots above the letters. I uninstalled and reinstalled Firefox from scratch in case an add-on was at fault but even with a clean install I am still seeing the issue. I checked my font settings and do not have any minimum font size set. I have allow pages to choose their own font ticked.
I've uploaded an image where I can see some correctly rendered text and some gappy looking text (not from a Google search but a Mozilla query). It also happens when commenting online sometimes, during typing it will be gappy but it will show properly once submitted. Any ideas for a fix would be warmly welcomed and I can give more examples if that would help. Although it's not Firefox related, I did restore all defaults in Chrome and it didn't fix the issue there either.
I uninstalled the most recent Windows Update since the problem is recent but it didn't change anything. I'm not sure if browsers would even look to my computers fonts.

hi Auds77, this is probably caused by microsoft update kb3013455 which can cause font rendering issues on vista:
<blockquote>After you install security update 3013455, you may notice some text quality degradation in certain scenarios. The problem only occurs on systems that are running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available. </blockquote>
reference: https://support.microsoft.com/kb/3013455
one option may be to [http://windows.microsoft.com/en-us/windows/remove-update#1TC=windows-vista roll-back this particular update] for now until there is a fix by microsoft or you could also look if there is a [[Upgrade your graphics drivers to use hardware acceleration and WebGL|graphics driver update]] available on the website of the vendor (intel/amd/nvidia) which might also resolve this problem in some cases.

Maximum number of items reached in FI--help required please

Hi,
How to avoid the situation(error)
Po raised for some 300 line items.
PO consists of 3-4 header conditions and all the conditions are linked to a differrent GL account all together.
GR to be done against PO.
System fails to post the document because of the error 'max no of items reached in FI(since counter limit for accounting document lines is 999).
This is most likey to happen frequently in my requirement since the POs are often consisting of 200-300 line items and alsmost 2-3 conditions minimum.
In addition to that we have thought of going for purchase account management which means that effectively 2 more additional postings in GR.
So all in all for every line in PO there could be atleast 6-8 accounting entries getting generated at the time of MIGO or any goods movement.
This very commonly happens in Sales issues also and in Invoicng also.
I have raised this issue earlier also but could not got any concrete answer.
Many suggested to go in for split GR but how far that is advicable.
There is summerization option but I am really not getting any que out of some notes I read and some forum postings I read.
Can anyone suggest me a simple step by step approach for achieving this and basically how it works and would be helpful for me.
I repeat and request you all to help me in this.If someone has already done this then please share the knowledge.
Regards,
arjman

Hi,
The issue what you mentioned is really a very painful and most complex one which we are also researching. OSS suggested a OSS note and it didn't work. Yes, as you said, we have that issue in MIRO for now....I am afraid, it would comeup in MIGO as well, then, I will have no sleep, for sure....suprizingly, OSS is working very slow on this issue to my surprize. The OSS note doesn't clearly specify what to and how to summarize. We have different issues in MIRO....one for number of tax lines exceeding 500 lines...and GR/IR lines exceeding on another end...we thought if we can't fix tax lines, at least we can work on GR/IR lines but neither one is successful....We have this issue in ECC 5 for the past 3 months...with real good expert in each functional space in the team, we couldn't fix it yet!!!
just FYI

Adobe Audition R6025 Virtual C++ Crash (Help Required, Please!)

Hi. I posted a problem about Rewire earlier but I seem to have sort of overcome that. My problem now is that I get a crash with a dialogue box stating that AA is shutting down:
'To continue working where you left off, please restart Audition.'
This is followed by another dialogue:
'Microsoft Visual C++ Runtime Library Runtime Error! R6025 - pure virtual function call'
And then it shuts down.
I searched for solutions and have discovered that r6025 is a very general fault that can mean a number of things. Here's the specific thing that causes the crash:
If I have a session from me previous machine open, it'll play fine. If I try to change the input to a track, that's when the crash occurs. I can do it if I create a new session (I think - I haven't done anything complicated from scratch since I got a new PC this week).
I have tried a few things that have been suggested on other posts:
Reinstalling AA (a few times).
Running Audition in compatibility mode for XP SP2, XP SP3 and not in any compatibility mode.
Uninstalling Quicktime (as suggested http://forums.adobe.com/thread/414943).
Deleting the Application Data backup so that a new one gets created next time (as suggested http://kb2.adobe.com/cps/403/kb403357.html).
Disabling all plugins.
Trying it out on another User ID.
None of these measures have helped as of yet. I'd really appreciate some help or some suggestions of actions I could take. My system is an AMD Phenom II X4 945 (AM3) in a Gigabyte mainboard with 4GB RAM, running Windows 7 Professional 64-bit, AA 3.0.1 and using my Audigy 4 Pro from my old PC rather than the onboard Realtek HD Audio (for Asio purposes).
Please post if you need any more details to help with diagnosis.
Anticipated thanks.

Hi. Thanks very much for the posts. I'm aware of the 48kHz issue from previous incompatibilities with other people's sessions. Always managed to work in 48kHz with Reason before using XP. I've just tried the ASIO4ALL driver with the same result, I'm afraid. Not really sure if the problem is limited to Reason because I don't own any other Rewire apps. I'm really hoping to get this sorted out because I use Reason an awful lot in conjunction with Audition as I think they make a nice pairing of complimentary skills (lack of a tempo track notwithstanding). I can change inputs on sessions with no Rewire tracks in them, using either Creative Asio or ASIO4ALL and it doesn't crash. I can also use Reason quite happily on it's own. I've even managed to create a new session with a couple of wav's and then set Reason on another track with no problems (although these sessions are very simple). I'm really stumped. I suppose I could try to run the whole thing in XP Mode but that negates some of the advantages of using my new computer and requires me to install everything, Audition, Reason and all my plugins, for a second time. I will do that if I have to but that's what my Dad, a scientist, would call an inelegant solution. Again, I really appreciate the suggestions you've come up with thus far. The ASIO4ALL idea was a good one and I'll keep it installed too as an option for when other problems (inevitably) arise. I'm loath to discard what was a reasonably expensive sound card (even if it is a bit dated and patently not designed for audio engineering). In my old set up, I used the Audigy for mixing and monitoring but my MBox as in input due to it's Focusrite preamps. Don't get me started on my MBox and Pro Tools!!! Haven't even started to install that yet because I know it'll be a nightmare. It's hard enough trying to install an update from Digidesign. I'd really be much happier to get things back to the way they were - plus a much faster processor and more RAM. That was the whole idea of the new machine. I really love AA and have done since Cool Edit 1.2. I'm too set in my ways to try and learn new software, not too mention too poor to buy any!! Any ideas really gratefully accepted.

SAML configuration issue-Urgent Help required!!!

I have configured SAML using the following article guidelines http://www.oracle.com/technology/pub/articles/dev2arch/2006/12/sso-with-saml.html
but I 'm unable to login to Application A itself which is SAML source site.Please Help me to understand where am i going wrong!!!!!

Hi George,
The issue is I wanted to download few app from google play on Cisco DX 650 example office suite whic helps to open an attachment like word pdf etc on the phone.In order to do that we require a google play store app on the phone which I am able to see on few phones and on few phones it is missing.
I have checked the CUCM config for all the phone and I can see allow application from android market is enabled.
still I am not able to see the play store Icon
Rgds,
Ajith

Windows 7 and Bonjour--Printer issue--Need Help ASAP, Please!

Okay, add my name to the growing list of people with Windows 7 issues. (Actually, add my wife's name. I have a Mac, and I'm glad I do.)
Anyway--she has a new HP laptop with Windows 7 preloaded. We use Airport Express as a wireless router for our 5 year old HP PSC 1350 all in one printer, requiring the use of Bonjour 1.0.6 on her new laptop to print wirelessly. Except it is only printing about 2/3's of a page and quitting. This also fouls up the printing que, meaning nothing else will print on her unit. (I have not tried printing from the Mac while her HP is AFU.)
How do I rectify this, other than taking her HP back and getting the Mac she'd be happier with?
Any and all help would be greatly appreciated, as she's in school and needs to print a lot of papers.
Doc

There has been no satisfactory answer to this. So, no, my question isn't really answered.
Instead, we bought a new wireless printer, and I removed Bonjour and AirPort from her Windoze 7 unit.
I'm not so thrilled, but she's happy. And if she's happy, it's okay.
I guess.
Doc

Urgent Help Required Please

Hello,
I have the following code
public class StudentRecords {
 private Hashtable recordHolder; //Holds marks for collection of students
 //Maps students to their marks
 private int noAssignments; //Number of marks associated with each student
 public StudentRecords(int noAssignments){
 //Argument is the number of assignments for the course
 recordHolder = new Hashtable();
 public Enumeration getStudentNames(){
 //Returns with an enumeration of student names who do the course
 return recordHolder.elements();
 public int getMark(String studentName, int assignmentNo){
 //Returns with the mark for the student studentName on assignment assignmentNo
 Hashtable studentDetails = (Hashtable)recordHolder.get(studentName);
 String assignmentNoStr = studentDetails.get(String.valueOf(assignmentNo)).toString();
 return Integer.parseInt(assignmentNoStr);
 public int getNoOfAssignments()
 //Returns with the number of assignments associated with the course
 return 10;
 public int getAverage(String studentName){
 //Returns average of marks associated with studentName
 Hashtable studentDetails = (Hashtable)recordHolder.get(studentName);
 System.out.println("studentDetails " +studentDetails);
 int total = 0;
 int countAssignments = 0;
 Enumeration enum = studentDetails.elements();
 while(enum.hasMoreElements())
 countAssignments++;
 String mark = enum.nextElement().toString();
 int mark2 = Integer.valueOf(mark).intValue();
 total = total+mark2;
 return total/countAssignments;
 public void createStudentRecord(String studentName){
 //Create a student record which associates a student with the marks for his/her assignments
 if(!recordHolder.contains(studentName))
 //System.out.println("Creating record for " +studentName);
 recordHolder.put(studentName, new Hashtable());
 public void addMark(String studentName, int assignmentNo, int mark){
 //Add the mark given by mark for assignmentNo to the students record associated with studentName
 Hashtable assignments = (Hashtable)recordHolder.get(studentName);
 String assignment = String.valueOf(assignmentNo);
 String markStr = String.valueOf(mark);
 // new record
 assignments.put(assignment, markStr);
 public String toString()
 return recordHolder.toString();
}Now i have a SAX parser class that is suppose to populate the StudentRecords object. Once this is done I need to output the details into a HTML file using a PrintWriter ( this I can do) but how the hell do I populate my object with this SAX parser.
Here is my SAX class
public class MarksProcessor extends HandlerBase{
public static void main(String[] args){
 //Main method
 try
 MarksProcessor mp = new MarksProcessor();
 Class loadedClass = Class.forName("com.ibm.xml.parser.SAXDriver");
 Parser xParser = (Parser)loadedClass.newInstance();
 xParser.setDocumentHandler(mp);
 xParser.setErrorHandler(mp);
 xParser.parse("Classmarks.txt");
 catch(Exception e)
 e.printStackTrace();
public MarksProcessor()
 public void error(SAXParseException se){
 //Executed when a serious error occurs in processing the XML source
 System.out.println("Error: Problem with XML "+se.getMessage());
 public void warning(SAXParseException se){
 //Executed when a minor problem occurs when processing the XML source
 System.out.println("Warning: Problem with XML "+se.getMessage());
 public void startDocument() throws SAXException{
 //Executed when the XML document is first executed
 System.out.println("Document started");
 public void startElement(String elementName, AttributeList al) throws SAXException
 System.out.println("End ELEMENT = "+ elementName);
 public void endElement(String elementName) throws SAXException{
 //Executed when the end of an element is encountered
 System.out.println("End ELEMENT = "+ elementName);
 public void endDocument() throws SAXException{
 //Executed when processing is finished
 System.out.println("Document finished " +records.toString());
 public void characters(char[] chars, int start, int length)throws SAXException
 System.out.println(new String(chars, start, length));
}Here is the DTD
<STUDENTLIST>
<STUDENTMARK>
<STUDENTNAME>Dobbs</STUDENTNAME>
<ASSIGNMENTNO>1</ASSIGNMENTNO>
12
</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Wilkinson</STUDENTNAME>
<ASSIGNMENTNO>1</ASSIGNMENTNO>
28
</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Wilkinson</STUDENTNAME>
<ASSIGNMENTNO>2</ASSIGNMENTNO>
44
</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Roberts</STUDENTNAME>
<ASSIGNMENTNO>1</ASSIGNMENTNO>
77
</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Roberts</STUDENTNAME>
<ASSIGNMENTNO>2</ASSIGNMENTNO>
80
</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Roberts</STUDENTNAME>
<ASSIGNMENTNO>3</ASSIGNMENTNO>
50
</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Wilkinson</STUDENTNAME>
<ASSIGNMENTNO>3</ASSIGNMENTNO>
60
</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Thomas</STUDENTNAME>
<ASSIGNMENTNO>1</ASSIGNMENTNO>
45
</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Thomas</STUDENTNAME>
<ASSIGNMENTNO>3</ASSIGNMENTNO>
90
</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Dobbs</STUDENTNAME>
<ASSIGNMENTNO>2</ASSIGNMENTNO>
12
</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Thomas</STUDENTNAME>
<ASSIGNMENTNO>2</ASSIGNMENTNO>
45

</STUDENTMARK>
<STUDENTMARK>
<STUDENTNAME>Dobbs</STUDENTNAME>
<ASSIGNMENTNO>3</ASSIGNMENTNO>
12
</STUDENTMARK>
</STUDENTLIST>
The other problem is that I have to know how many assignments there are before I create any StudentREcords object.
Please help. I am desperate and this paper has to be finished in the next day or two.
Thanks alot.

You have to keep track of what the parser reads as it goes through the document. Most of the work will be done in the endElement() method, as you don't have all the information for an element until that's called. Here's a rough draft:public String currentElement;
public StringBuffer currentElementValue;
public String currentStudentName;
public String currentAssignmentNo;
public void startElement(String elementName, AttributeList al) throws SAXException
currentElement = elementName;
currentElementValue = new StringBuffer();
public void endElement(String elementName) throws SAXException
if (currentElement.equals("STUDENTNAME")
 currentStudentName = currentElementValue.toString();
 createStudentRecord(currentStudentName);
if (currentElement.equals("ASSIGNMENTNO")
 currentAssignmentNo = currentElementValue.toString();
if (currentElement.equals("MARK")
 addMark(currentStudentName, Integer.parseInt(currentAssignmentNo), Integer.parseInt(currentElementValue.toString());
public void characters(char[] chars, int start, int length)throws SAXException
currentElementValue.append(chars, start, length);
}PC²

Itunes help required PLEASE

Please can anyone help? I brought an Ipod nano about a month ago and I am still unable to use this. The problem being Itunes.
No matter what I try I get a message saying Itunes has encounted an error and needs to close.
I have installed Quicktime standalone and this works however Itunes doesn't. I have used the suggested error finding software - this came up with nothing and also used msconfig and this has come up with nothing and Itunes still will not work.
Any suggestions will be greatly appreciated.
Thanks
Dave

hi Dave!
okay, let's try enlisting some additional technical help with this one.
we'll get a crash log from itunes, and send it to someone who can interpret crash logs.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
launch itunes, collect the crash log, and send it to this email address
in the email:
(1) state the precise version number of itunes that you're using. (right-click on your itunes icon in "C:\Program files\iTunes", select "Properties" and click on the "version" tab to doublecheck. for example, mine says "file version 6.0.4.2".)
(2) include the URL to this thread so that the person who gets the email has some context, but also give as much information about the context of the crashing as you can.
love, b

Help required please with installof a Linksys Router iMac G5

Thanks in advance for any advice or help.
I wish to connect an iMAC G5 directly to a Linksys Router with 4 port switch.
Any ideas on this as the Linksys CD does not have Apple software.
Thanks
Fergal.

Welcome to the Apple Forums!
Sure, it will work. I'm uncertain as to the model that you are referring to, but generally, once you plug in your iMac to your linksys router, you will access it via your web browser at 192.168.1.1 and there is no user name and the password is Admin.
Take a peek at the documents that came with your router and look for the section called "Web based" administration and that should get you up and running.
Let us know if you have any other issues.

8800 Sircocco - Help required please

Hi ther, just bought this phone and have a few problems hoping somebody can help.
1. Anyone had problems hearing the other caller? I have difficulty, tried increasing the volume etc but to no avail.
2. How do you add / edit the voice commands in the contacts? I want to use my bluetooth but It wont recoginse the "default" name tag given to all my contacts..
Thanks in advance..

I don't own the Sirocco Edition but the 8800 original. Don't mean to offend but, are you making extra sure that the ear-piece for the phone is properly positioned? Also double check that there's no plastic over that part of the phone. One of the things about the 8800 series is that unless the portal for the incoming speech is right over your ear, its pretty much inaudible. For some reason it seems to be especially problematic with this type of handset. Otherwise, the only other reasons I can think of are that you might have some signal issues where you're located, or it could just be faulty. Try it out in lots of different environments and positions and see what happens.
The voice tags are very likely automatic, (similar to the way they are in the N80, or 6233, etc) and you can't edit them per se. They do take some getting used to but the phone becomes better able to recognize tags the more often you use them. To make voice dialling easier, try looking in the options under each contact to see if there is a possibility for adding a nickname, and then try checking to see whether the phone will recognize the nickname for calling that person. One last resort is to check first how the phone pronounces the tag for each default. You might find a slight difference in emphasis or inflection which will make all the difference between getting the right number and no match at all.

BR* Tpols help required please

Hi guys,
This is Angeline Purnama, I really need your help this point
In NW2004s PI-Server 7.0 under windows 2003
Basically someone already setup for SAP BR*Tools setup which is i can see DB12 or DB13 view...
Everyday it backup whole database files such as:-
SR3.data1, SR3.data2, SR3.data3, SR3DB.data1,SR3DB.data2,SR3DB.data3,SR3DB.data4,SR3DB.data5,SR3DB.data6 etc. etc.
Size of all files more then 1GB everyday... and it create everyday new folder name and saved all files in side of folder
1. Question: Is that normal procedure if yes, so why not SAP just backup only updated files ?
2. How to check what kind of tables listed in large file for example SR3.data1 or SR3DB.data1 ? where should I go in SQL statement is that table or database sigma?
3. If I want to changed date only backup 2 or 3 days only, everyday and prevouse bacakfiles are deleted automatically, becuase I have to remove folder manualy everyday old backup folder... where should I change? in initSID file? or goto brtool and change or background job change ?
4. Its saved some Archived logs too, like folder names: oraarch and lot of files in it such as Arch38923.001 every extension .001 how to check thase files... or open it where they are define...
I read help.sap.com that meke me very confouse and point out some others notes
I belive if someone give me very nice and short answer that will be really appriciated, I know you guys very busy but take little time for me,hehehehe thanks in Advanced
Angeline

Hi,
Please find the answer of the questiones below.
1. Question: Is that normal procedure if yes, so why not SAP just backup only updated files ?
It all depends on what backup stratgy you followin your env.
I think you have scheduled offline backup every day and some time in day you sap system will not be accessable.So it is tacking the backup of all the system and not the updated data.all the updated data is in the archive logs files.
so if you have one offline backup and all the archive logs files after thet then you can restore the system.
2. How to check what kind of tables listed in large file for example SR3.data1 or SR3DB.data1
I dont think any specific table is backed up .in offline backup all the tables(data) are copied .
3. If I want to changed date only backup 2 or 3 days only, everyday and prevouse bacakfiles are deleted automatically, becuase I have to remove folder manualy everyday old backup folder... where should I change? in initSID file? or goto brtool and change or background job change ?
Please check that is there any scheduled defined in DB13 you can do it in DB 13 as we have collender there.
4. Its saved some Archived logs too, like folder names: oraarch and lot of files in it such as Arch38923.001 every extension .001 how to check thase files... or open it where they are define...
Archive logs are created when you are updateing or changing some thing in the database.All the archive logs thet are created are made entry in the file backSID.log.
Thanks
Rishi Abrol

First Start HELP required please.

My new laptop is super. Now I need to switch it on. Do I do this with the cable attached and switched on or do I simply rely on battery power? Can I work on it when the cable is attached and switched on? Will this 'save' battery power?
Please help me as I want to get going!
Thank you,
David

Thank you for your help. There is one further thing. I have been removing the little plastic cap from the plug when I plug it in. Is that right or should I leave that on?
David

Circular JList . Help required please

Folks,
I need a bit of help please.
I have created a JList,but I want this to be circular.
Im my JList example,I display 11 numbers,the first 5 are displayed
when the application starts up,the user should be able to
press the 'Down Button'and the focus shud then go to 2.
Once the focus reaches 5,and the user presses the Down Button,
number 1 should scroll up and the screen shud display numbers
2 to 6.
The user presses the Down Button again,and the screen shud display
3 to 7.
This way till number 11 is reached,and when the user presses
the 'Down' button,number 1 will be displayed.
All shud be circular.
Attached is my code.
Can some please suggest what needs to be coded in the
Down Button action performed inner class??
Or Am I overlooking something?
public class MyCircularList extends JPanel{
    private JList list;
    private DefaultListModel listModel;
    private JButton DownButton;
    private static final String DownString = "Down";
     public MyCircularList() {
          super(new BorderLayout());
          listModel = new DefaultListModel();
          listModel.addElement("1");
          listModel.addElement("2");
          listModel.addElement("3");
          listModel.addElement("4");
          listModel.addElement("5");
          listModel.addElement("6");
          listModel.addElement("7");
          listModel.addElement("8");
          listModel.addElement("9");
          listModel.addElement("10");
          listModel.addElement("11");
          //Create the list and put it in a scroll pane.
          list = new JList(listModel);
          list.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
          list.setSelectedIndex(0);
          list.setVisibleRowCount(5);
          JScrollPane listScrollPane = new JScrollPane(list);
          DownButton = new JButton(DownString);
          DownButton.setActionCommand(DownString);
           DownButton.addActionListener(new DownListener());
           JPanel buttonPane = new JPanel();
           buttonPane.setLayout(new BoxLayout(buttonPane,                                                                                           BoxLayout.LINE_AXIS));
           buttonPane.add(DownButton);
           buttonPane.add(Box.createHorizontalStrut(5));
           buttonPane.add(new JSeparator(SwingConstants.VERTICAL));
           buttonPane.add(Box.createHorizontalStrut(5));
           buttonPane.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
           add(listScrollPane, BorderLayout.CENTER);
           add(buttonPane, BorderLayout.PAGE_END);
        // Inner class to handle Button Listener.
     class DownListener implements ActionListener {
     public void actionPerformed(ActionEvent e) {
        // How to handle the circluar motion of the list???
     } // End of actionPerformed.
     } // End of Inner class.
     public static void main(String[] args) {
        JFrame.setDefaultLookAndFeelDecorated(true);
     JFrame frame = new JFrame("Circular List Demo");
     frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     JComponent newContentPane = new MyCircularList();
     newContentPane.setOpaque(true);
     frame.setContentPane(newContentPane);
     frame.pack();
     frame.setVisible(true);

Since you didn't include any code in your listener, I'm not sure what you want. Perhaps:
int n=(list.getSelectedIndex()+1)%list.size();
list.setSelectedIndex(n);
list.ensureIndexIsVisible(n);
But the JList keyboard support does all this automatically?

WRT160n speed issue, tech help required please

Similar Messages

Maybe you are looking for