WRT160N to WRE54g Workgroup resolution issues

First of all, thank you in advance for any assistance.
I have a WRT160N as my wifi router to my cable modem. All computers have been connected to it and can network together fine. 
I recently added a WRE54G Wifi Extender V.3 to the WRT160N using the manual setup, which functions decently and allows for all computers connected to it to ntework to each other, which includes workgroup names resolution.  I have the static IP address, Mask and Gateway all set to point at the WRT160N and in the same subnet.
I am not, however, able to achieve names resolution in my WORKGROUP or IP networking from the laptop which is wirelessly connected or the desktop hardwired  to the WRT160N to any of the computers connected to the WRE54G.  I suspect that I need to have a routing table entry that allows me to route networking requests to the Wifi extender and on to its connected computers.
I receive a "network path not found" error when trying to explore the computers connected to the WRE54G, even though I can ping them and I see their name in the Workgroup Names list in Network places
May I please request someone's assistance in solving this issue?
Thank you.

Without the Range Expander connected in your network are you able to access all your computer when they are connected to the Router?
The computers which are connected to Range Expander from that computer try to ping the computers which are connected to the Router. Also make sure if there is any firewall or antivirus on your computer Disable it and the try again.. Also make sure all the computers are in the same Workgroup and the AP Isolation is Disable on your Router.

Similar Messages

  • Serious resolution issues with After Effects CC (2014) on Windows 8.1 Pro on Dell Precision M3800 laptop??

    My new company installed Adobe Creative Cloud (There was some annoying Proxy issues at first, because of the seriously tight I.T policies) but we are having some serious resolution issues with After Effects CC 2014 (also have this resolution problem with Adobe Premiere, Media Encoder, Muse) on Windows 8.1 Pro on a Dell Precision M3800 laptop with icons and interface looking too small and hard to see, is there a fix, an update or a work around, can anyone help?
    Any help will be appreciated!
    k.regards
    Ramon

    Hi Todd is there a time-frame for this fix, there is a lot of pressure on me, because I convinced my company to get the Creative Cloud and quite a lot of the CC software is not compatible with the latest Windows 8.1 OS.
    Is there at least a work around, until this big fix comes along?
    k.regards
    Ramon

  • OS X 10.8.3 Display Resolution Issue

    Ever since updating to 10.8.3, there has been a sporatic resolution issue when waking my MBP. My mid 2009 13" MBP operates in closed lid mode while connected to a 21.5" monitor. My machine frequently wakes to a completely incorrect resolution that is many times the size of my display. It fixes to the correct resolution if I simply sleep and wake again, or correct it via System Preferences, but having to do this several times becomes quite annoying. Anyone else experiencing this bug and/or have any ideas on its resolution?

    Hi GoldenA,
    Thanks for visiting Apple Support Communities.
    It may help to reset the NVRAM by following the steps in this article:
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Best,
    Jeremy

  • Macbook Pro 15" Retina Windows 7 HDMI Resolution issue

    Hello,
    I have a late 2013 Macbook Pro 15" with Retina display running bootcamp with Windows 7.
    I have connected the Macbook to an external HP w2448hc display using HDMI interface.
    When booting to OS X 10.9.4, the resolution of the external display is set to 1920x1200 and it looks fine. See picture below:
    However, when booting to Windows 7 the resolution on the external display looks lower (although shows up as 1920x1200):
    I have another PC which I have connected to the same display with HDMI and the resolution also shows up as 1920x1200. However, in this case the resolution indeed looks as the correct one:
    Although not seen very well from the screen shots, both the PC and the Macbook Pro (with Windows 7) show the same resolution in the settings, but the desktop and icons under Macbook Pro (bootcamp) look bigger and with smaller resolution.
    Does anyone know how to solve this?

    Hi,
    I managed to fix this resolution issue by lowering the color depth to 16bit for the external display. Not exactly sure why was this necessary, maybe for some reason Windows cannot allocate enough video memory for both displays?

  • 2048x1280 Resolution Issues in 30" Display?

    Anyone hoping for a fix to the broken 2048x1280 resolution issue with the older 30" Cinema display prepare to be disappointed... it's still broke in 10.6.5 .... sheesh Apple, is this so hard to fix?

    BrandHOUSE wrote:
    G'day,
    I've just upgraded to Acrobat 9.2 this arvo and I immediately noticed that a PDF created as screen resolution displays in a very poor quality. Yes, it's a low res PDF, but everything within the PDF displays very badly. Have I maybe missed something that has changed in Preferences or is it something else?
    I am concerned as all work is sent to clients via a PDF for approval etc. and that they might feel that my artwork is of inferior quality due to the way PDFs now seem to display under Acrobat 9.2
    Thanks in advance for any comments or help.
    Go to Preference and to Page Display:
    Check the part about the resolution and see if it matches the resolution of your display.
    The the resolution of which you view a PDF on screen doesn't necessarily have to do with how it looks when printed. I just updated 9.2 and open a PDF and I didn't see any problems on my machine.
    (Please note information is given by an Experienced User of Acrobat. I am not an employee of Adobe.)

  • Menu Resolution Issues

    I've been working on this DVD Menu forever for our first feature film, DVD's have to go into produciton today so Ive been working on getting the master DVD out to our duplicator. Can someone help me with my menu resolution issues I am having?
    I've sent my menu from photoshop with interactive buttons, both the buttons and the text look great on my preview file, but after burning to dvd the menu looks low res and muddy. is there something I'm doing wrong?

    is there something I'm doing wrong?
    It would help if we knew the various settings. What are the project default transcode settings? That is what is used for menus. Motion menus? What is the pixel size and par of the menus.
    Button highlights by the DVD spec only allow 2 bit indexed color. Adding effects does not work.
    You might post a screenshot from photoshop with the layers twirled open.

  • OS X Mavericks: display randomly turning white/brown/grey [no resolution issues]

    Hey folks,
    I discovered a very strange problem the last few days while using the internal and an external VGA Monitor on my Macbook Pro (mid 2010, 8GB).
    I'm running on OS X Mavericks with the latest updates and the system runs pretty smooth.
    What I discovered is as follows:
    Using any VGA monitor that I own, sometimes both (internal and external) display turn white (or grey or brown, just displaying a solid colored screen). This occurs with literally every display I used externally and doesn't occur while just using the Macbook Pro without an external display. This didn't happen before on Mountain Lion, neither did it happen the first weeks on Mavericks (I've been using it since it's released). After this happening, I have to do a forced reboot. This issue does occur randomly within the daily usage.
    Furthermore, I don't have any resolution issues as many user claimed about this already while running OS X Mavericks.
    From looking at the system I can tell that the RAM is not damaged (also because this doesn't happen while using the MB without external display). I also tried other RAM, issue remains reproducible.
    I haven't found any solution on the internet, so I decided to post my problem here.
    Hope there is anybody out there who might be able to help me out.
    Yours sincerely

    Same problem here https://discussions.apple.com/thread/5613306 FIX IT APPLE!

  • Apple tv3 resolution issues

    I've been having resolution issues with my apple tv3. I recently updated the software and now the quality is nowhere near what is was last week. Originally I thought it was just Netflix but after trying the other channels like Skynews and PBS I've dicovered that it's the AppleTv. I reset the resolution to 1080p under
    settings. I'm finding that I when I start a video I get the hd for the first few seconds then the quality goes to crap.I checked my internet speed and clocked it at
    25 mbps.
    Any help would be greatly appreciated.

    It's not ATV, the network connection.  Bandwidth download tests are not useful for this since it only tests for a brief time span, does not test the path from your ATV to the content provider.  It is also possible that your ISP is throttling streaming video or content from specific services.  I am guessing you are using WiFi?  I would try using a wired connection for a while as a test to see if that resolves it.  Streaming video rarely works well or reliably over WiFi.

  • I have a resolution issue where my radeon 6770m does not play my games on 1366*768

    i have a resolution issue where my radeon 6770m does not play my games on 1366*768 although it was pre choosen in game graphics options, inside the game there is always a black area at the right of my screen where i cant fix.
    my second intel hd 3000 chip doesnt have this problem so any help plz ?

    this seems like the same problem described in this thread: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Black-bar-and-screen-misalignment-on-Pavilio...

  • Connecting from a remote computer / name resolution issues

    My work has two SQL Server 2005 databases, one installed on a Windows XP machine (running some equipment) and one installed on a Windows 7 machine (backing up the files from the XP instance).  Both computers run only the default instance.  I had
    replication set up and functioning (data being created on the XP maching was being replicated to the Win 7 machine) for the last three weeks in July.  I recently noticed that the replication is no longer working (the files were no longer being copied),
    and when I tried to check the status I got an error about named pipes, or, if I disabled named pipes "tcp provider error 0 no such host is known".
    At the time I found the replication problem, I could connect to both databases through SSMS on the Windows 7 machine.  On the XP machine, I could use SSMS to browse to the Win 7 instance but SSMS would not connect to the Win 7 instance by name (same
    errors about no such host known); the connection does go through by IP address.  I can ping from the Win 7 machine to the XP machine both by IP address and by name.  I could ping from the XP machine to the Win 7 machine by IP address but NOT by name.
    I tried running the workgroup wizard on the XP machine, thinking this might help with the name resolution problem.  In the wizard, I changed the workgroup name to a new name.  I changed the workgroup name on the Win 7 machine to match.
    This change did not affect the ping status - I can still ping by both name and IP address from the Win 7 machine, and still only the IP address works from the XP machine.  However, now SSMS on the Win 7 machine no longer sees the XP machine!  Trying
    to log in with either the machine name and the IP address, I now get a "timeout expired" message, and the SSMS login browser does not show the XP machine on the network.
    Any pointers on where to look for the cause of this problem would be very welcome.

    There was some problem (bug?) with the remote connections flag on the Win 7 server.  Someone had posted in the comments to a technet article that unchecking the remote connections box, restarting the server, then re-checking it helped them.  I
    tried it, and that fixed the problem with the Win 7 machine being unable to see the XP machine.
    Olaf's suggestion about the Hosts file fixed the problem with the XP machine having to use the IP address - now it can connect by name as well.
    Now I just have left the problem of a broken subscription to my replication, but that's a separate issue so I'll consider this thread closed.  Thanks to everyone who offered suggestions.

  • Resolution issue with macbook pro 13 (late 2013) and dell u2711

    I have a Dell U2711 (native resolution 2560x1440) that I use without issue with a macbook pro late 2007 (running 10.10.x), various iMacs and Macbook air 2011 running 10.10. When I say without issue, the display works at its native resolution.
    Last week we got a MacBook Pro 13in, late 2013 model.
    If I connect this macbook via either thunderbolt connection to the u2711 using either DVI port on the dell, the maximum resolution that I can use is 1920x1080. I am using apple mini displayport to DVI adaptors (I have tried 2 different ones and 2 different DVI cables, with no improvement). Clicking option + scaled in sys prefs does not give the native resolution as an option.
    However, I just discovered that if I use a DVI to HDMI adaptor and I connect the macbook to the display I get the full native resolution without issue (2560x1440).
    I have zapped the pram, powered down the display etc etc etc and it made no difference.
    I would prefer to use the mini DIsplayPort to DVI adaptor rather than HDMI, any suggestions appreciated.
    TIA.

      Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
      Start up in Safe Mode.  http://support.apple.com/en-us/HT1564
    Best.

  • Mac mini and Sony tv resolution issue

    Hello,
    I have recently purchased a Mac mini for the purposes of hooking it up to my 51" Sony Wega HDTV. I took the mini out and connected the DVI adaptor that came in box and then hooked the mini to the tv via HDMI cable thinking this was the best possible connection for my mini. I have an issue where the screen is over flowing off the TV screen. I looked in system preference and have very limited resolution options but 1080i was selected and also over scan was checked. If I deselect overscan I get borders which I don't want. My tv doesn't have many options so how can I calibrate these two to work togethor?

    I just discovered this is not a TV issue at all...
    Uh, yes it is. Overscan is a condition unique to TVs. Computer monitors don't do it (overscan) hence there is normally no need for the kind of graphics card driver you are talking about, e.g. one that has precise control of video borders.
    Many TVs on the market today have a method for defeating overscan, tucked away somewhere in their menu system, in order to allow the TV to be used just like a computer monitor. That is always the preferred solution when it is available because it will make the best possible image on the TV.
    Your TV is a rear projection TV. Such TVs are not well suited for use as computer monitors because overscan is naturally baked into the optics architecture, meaning the manufacturer deliberately sets the mirror and lens system in such a way as to cause the native resolution (1280 x 720 in the case of your TV) to extend beyond the edges of the projection screen. Therefore it is impossible to get the native resolution of the projector's engine to display fully and perfectly on the screen. Only scaled or bordered version of it can ever be displayed. It's all fixed at the factory and there's no getting around the fact.
    For the original G4 Mac mini that had ATI Graphics, there was a driver like the one you found for your father's Windows computer that allowed video borders to be set independent of resolution. But apart from that early effort on the part of ATI, I have not seen anything like that since for minis that have graphics based on Intel or nVidia hardware. I think you are going to be stuck with the dark video borders as a necessary limitation of the TV you own in the absence of any driver to counteract that limitation.
    I believe the media center front end app called Plex has a facility for setting video borders, but I've never used it personally since I am able to turn overscan off on my TV. So I can't vouch for how well it works. And in any case, since it is bound to the app, it will only be active when Plex is running and not when, say for example, the Finder is in use, which is when you most need it.

  • Portrait display resolution issue since upgrading to Mountain Lion

    Hello. I'm running a Mac Mini 2011 with the 2.5 GHz i5 and Radeon HD 6630m graphics. I run two monitors, one via HDMI and via the Mini DisplayPort to VGA adaptor. The HDMI connection runs landscape, the VGA portrait. Since updating from Lion to Mountain Lion, the resolution options in portrait disappear. I'm forced to use 800x1200, which stretches and distorts horribly, as opposed to the correct 1366x768 available to me in landscape.
    Prior to updating from Lion to Mountain lion I didn't have any issues, so it's pretty clear this is Mountain Lion related. I'm hoping someone can help me resolve this issue.

    Try holding the option key when you click on the scalled button and see if the resolution you need is listed.

  • Intermittent screen resolution issues on Macbook Pro

    My screen can be clear and then reduced resolution or reduced color palatte.  So I know the screen has full resolution capabilty, it just changes without notice for no reason.

    I've just purchased an Envy Rcline 23-k300br and eversince I turned it on for the first time, I 've noticed an issue with the screen: the resolution of the screen is VERY BAD as I can see something like "strips" pof pixels, which makes it difficutl to read things on it (if looks as if there was a plastic film covering it, but there isn't). The pixels seem not to have a continuity, making the image (especilly in written text) very ugly and irregular. I have also noticed that when I press the back of the screen (for example to move the computer's position), the front screen shows a blurred yellowish spot (whcih changes the correct color of whatever is being shown on the screen at the moment), which disappears as soon as I stop pressing it (notice that even the slightest presure will cause the spot to appear).I have a Touchsmart 640 (windows 7) and the screen has an awesome resolution and it's perfect! I cannot understand why this happens on Envy Recline, since it's supposed to be a more modern (and improved) computer.

  • Resolution issues (oh, and xvidtune does not work)

    I'm using my 32" Samsung TV as my PC monitor.
    according to the specs in the manual, the max resolution it supports is 1360x768 @ 60Hz
    also, according to the manual, the horizontal frequency is 30-60 and vertical is 60-75
    I use the GeForce 7950 GX2 video card, and am using the latest nvidia drivers.
    here is the issue:
    X starts up. it even uses 1360x768 as it should. however, the display is not aligned with the monitor/TV - there is roughly a 150 pixel "gap" on the left side of the monitor.
    I tried a lot of things to eliminate it:
    1. adjust the picture on the screen using the monitor itself, obviously (it doesn't go past this point. can't move it more to the left.. I don't know why the limit this, but they do)
    2. xvidtune worked on numerous occasions for me in the past, but it fails horribly this time. whatever I do (even if I don't change anything) it tells me that the mode line I am requesting is either impossible or unsupported by my hardware config
    3. looked for a way to adjust the screen position using the nvidia tools, but I cannot find a way to do so.
    Currently, to be able to use the TV/monitor at all, I'm using the 1024x768 resolution in 4:3 picture mode. But this just won't cut it, I want to use the 1360x768 resolution in 16:9 picture mode (widescreen) as I _should_ be able to.
    how should I take care of this?
    my xorg.conf (complete) is as follows:
    Section "ServerLayout"
        Identifier     "Layout0"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"
        Option         "AutoAddDevices" "off"
        Option         "AllowEmptyInput" "off"
    EndSection
    Section "Files"
        #RgbPath         "/usr/lib/X11/rgb"
        FontPath        "/usr/share/fonts"
    EndSection
    Section "Module"
        Load           "dbe"
        Load           "extmod"
        Load           "type1"
        Load           "freetype"
        Load           "glx"
    EndSection
    Section "ServerFlags"
        Option         "Xinerama" "0"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "no"
        Option         "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Keyboard0"
        Driver         "kbd"
        Option         "CoreKeyboard"
        Option         "XkbRules" "xorg"
        Option         "XkbModel" "pc105"
        Option         "XkbLayout" "us,ru"
        Option         "XkbVariant" ",phonetic"
        Option         "XkbOptions" "grp:caps_toggle"
    EndSection
    Section "Monitor"
    # 96 DPI @ 1360x768
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "SAMSUNG"
        DisplaySize     359    203
        HorizSync       30.0 - 60.0
        VertRefresh     60.0 - 75.0
        Option         "DPMS"
    EndSection
    Section "Device"
        Identifier     "Device0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce 7950 GX2"
    EndSection
    Section "Screen"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth    24
        Option         "UseEdidDpi" "false"
        Option         "DPI" "96 x 96"
        Option         "AddARGBGLXVisuals" "True"
        Option         "TwinView" "0"
    #    Option         "metamodes" "1360x768 @1366x768 +0+0"
        SubSection     "Display"
            Depth       24
            Modes      "1024x768"
        EndSubSection
    EndSection
    Section "Extensions"
        Option         "Composite" "Enable"
    EndSection

    Perhaps try replace your Screen section with this:
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "metamodes" "DFP-1: 1366x768 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection

Maybe you are looking for