WRT160N v2 - problems with WPA2 and some questions about N

Hi guys
WRT160N V2 (F/W 2.0.03)
So I've been operating on Wireless G with WEP for a good while because of the problems I had in the past. The other day I decided to try again with the "N" and the WPA2... and spent 4 hours going around in circles; now I'm on B/G Mixed/WPA-PSK.
When I tried to use "N", (by enabling "Mixed" with everything else set to "Auto") even my HTC Sensation would only pick up a "G" connection... and all my laptops (which are not "N" capable) would not connect at all. So I ditched that and looked at the encryption and authentication.
When I enabled "WPA2" "AES/TKIP", my machines and phones would either not connect at all, failed to get an IP address, or connected fine with an IP address but routing wasn't working... and these symptoms seemingly occurred randomly - no direct device correlation and one device might show all the symptoms at different times.
I dropped down to WPA, and (touch wood) everything seems to be working at the moment... but I don't trust it. Can you tell me what I need to do to get this working on N and WPA2? Have I missed a firmware update?
p.s. Is this model 2.4GHz or 5GHz please?
Cheers

That's 2.4.. G network would only work in this case since you don't have N cards on your computers
Check out this article so you know what security you can set on your computers, some devices are not WPA capable so you might want to think about that too.
Setting-Up WEP, WPA or WPA2 Wireless Security on a Linksys Wireless Router
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Similar Messages

Problem with Spotlight and some system problem, Please HELP!

I'm using iMac G5 with iSight (10.4.8)
Recently, I've noticed that my spotlight didn't search anything, when I type something it just do nothing.
I try to re indexing the spotlight by move the HD to the privacy zone in the spotlight preference but nothing appear on the list. I can't add anything to the privacy zone both by draging the folder or click + button.
Then I search for the application that can clear the cache and re indexing the spotlight, I found Onyx and Maintenance.
Both of them can't be open, it say that I have to use an admin account.
Even I was logged in as a Admin, I have only one account in the system and set as an admin already.
So, I search on the internet and someone suggest another way to re index in terminal by using this command: sudo mdutil -E /
First I open the terminal and type the command, it said "-bash: sudo: command not found "
So, I try to use terminal by boot on the DVD that bundle with iMac, and same result.
I tried boot in single user by press command and S when boot and type sudo command, same reult.
Another information, I noticed on my macbook when I open the terminal, it will show this info:
Last login: show the time
Welcom to Darwin!
My computer name
But on my iMac, it didn't show anything except only the computer name line.
What should I do? Thanks

Highly recommend that you read, reread and understand the consequences and then follow the directions as presented on X Lab
http://www.thexlab.com/faqs/stopspotlightindex.html
That is before you follow some of the directions you find on some of these discussions. Even mine.

Download problems with 6i and OS question

Hello,
I am unable to downloand the trial version of Forms 6i for NT. Here is the url that I am using.
http://otn.oracle.com/software/products/forms/content.html
I am selecting Forms 6i for NT. But nothing happens when I click. Where can I download a copy of this?
Also my OS is Windows 98. Will this trial version work on this?
I have Oracle 8i (trial) installed on my win98 machine.
Thanks in advance,
Parvati
null

at http://www.oracle.com/ip/develop/ids/
there is a link on the right that offers a free CD that contains Forms.

MiFi2200 and some questions about VZAccess

I've been using my 2 MiFi2200s as modems in my desktop...I recently bought a Laptop and I use them as modems on it as well. My question is, why will it show me charging status on my Desktop...but not on my laptop? I have 3 cards total (2 activated) but 2 frequently tell me they're critically low only by blinking the red light...It won't tell me via VZ on my Laptop. Is it a setting i'm missing, or just a quirk? Thanks .
Also, 1 last thing...I have 2 separate wall chargers as well. Neither charger seems to charge the battery...it only seems to charge when they're plugged into a computer. Is it just really slow or are both of my chargers no good?

That's 2.4.. G network would only work in this case since you don't have N cards on your computers
Check out this article so you know what security you can set on your computers, some devices are not WPA capable so you might want to think about that too.
Setting-Up WEP, WPA or WPA2 Wireless Security on a Linksys Wireless Router
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

I am not able to download ITunes. I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don

I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don't see any thing else. Now not sure what else I have to do.
Thanks,
Ranjit

See the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2

I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, a

I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, and it freezes. If I go to Task Manager, I can see the two Adobe apps sucking up CPU cycles. If I end the processes, then the other apps continue. Today, I uninstalled FlashPlayerPluginqand plugin-container. All day since I have had no freezing of an app. What should I do to correct the problem?

Here's an explanation of what those processes are.
Inside Flash Player Protected Mode for Firefox
I'm curious about what you did to uninstall just those.

Hi! Everyone, I have some problems with JOIN and Sub-query; Could you help me, Please?

Dear Sir/Madam
I'm a student who is interested in Oracle Database and
I have some problems with JOIN and Sub-query.
I hope so many of you could help me.
if i use JOIN without sub-query, may it be faster or not?
SELECT field1, field2 FROM tableA INNER JOIN tableB
if i use JOIN with sub-query, may it be faster or not?
SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
Thanks in advance!

Hi,
fac30d8e-74d3-42aa-b643-e30a3780e00f wrote:
Dear Sir/Madam
I'm a student who is interested in Oracle Database and
I have some problems with JOIN and Sub-query.
I hope so many of you could help me.
if i use JOIN without sub-query, may it be faster or not?
SELECT field1, field2 FROM tableA INNER JOIN tableB
if i use JOIN with sub-query, may it be faster or not?
SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
Thanks in advance!
As the others have said, the execution plan will give you a better idea about which is faster.
If you're trying to see how using (or not using) a sub-query affects performance, make the rest of the queries as similar as possible. For example, include field3 in both queries, or ignore field3 in both queries.
In this particular case, I guess the optimizer would do the same thing either way, but that's just a guess. I can't see your execution plans.
In general, simpler code is faster, and better in other ways, too. In this case
tableB
is simpler than
(SELECT field1, field2 FROM tableB)
Why do you want a sub-query in this example?

I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from ....Try providing more room for peoples questions ...

I have a iphone 5, purchased dec 2013. Had no problems with downloads and syncing until yesterday. I updated to the latest 7.1.1 and now my purchased ringtones have bern deleted from my library and my phone, Where are they ????
I have gone to download again and told i can purchase them again
But there is no option to download all ready purchased items..
Can you provide an explanation and solution .

Are you using the same Apple id as used to originally purchase them
and are you using iTunes on a PC/Mac

Some questions about javacard 2.1.1 and smartcardio

Hello i have some question about java card 2.1.1 and the smartcardio package.
1.) I want to sign a message with the Signature.ALG_RSA_SHA_PKCS1 algorithm. I use the following code in the applet to sign the message:
final static byte P1_CREATION_MODE = (byte) 0x01;
final static byte INS_SIGN_MODE = (byte) 0x60;
final static byte SmartCard_CLA = (byte) 0xB0;
private void signMessage(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        byte byteRead = (byte) (apdu.setIncomingAndReceive());
        signature.init(privateKey, Signature.MODE_SIGN);
        short length = signature.sign(buffer, ISO7816.OFFSET_CDATA, byteRead, buffer, (short) 0);
        apdu.setOutgoingLength((short) length);
        apdu.sendBytesLong(buffer, (short) ISO7816.OFFSET_CDATA, (short) length);
        apdu.setOutgoing();
    }On the host side I use the following code to connect to the card and to send the sign apdu:
if (TerminalFactory.getDefault().terminals().list().size() == 0) {
            LOGGER.log(Level.SEVERE, "No reader present");
            throw new NoSuchCardReader();
        /* Select the first terminal*/
        CardTerminal terminal = TerminalFactory.getDefault().terminals().list().get(0);
        /* Is a card present? */
        if (!terminal.isCardPresent()) {
            LOGGER.log(Level.SEVERE, "No Card present!");
            throw new NoSuchCard();
        /* Set the card protocol */
     Card card = terminal.connect("*");
        ATR atr = card.getATR();
        LOGGER.fine(getHexString(atr.getBytes()));
        LOGGER.fine(getHexString(atr.getHistoricalBytes()));
        CardChannel channel = card.getBasicChannel();
        CommandAPDU cmd = new CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, new String("datadatdatadata").getBytes(), (byte) 0x40);
     ResponseAPDU response = channel.transmit(cmd);
        card.disconnect(false);But this does not work and i got the following error
javax.smartcardio.CardException: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:202)
        at sun.security.smartcardio.ChannelImpl.transmit(ChannelImpl.java:73)
        at de.upb.client.smartmeter.SmartMeter.initSmartCardApplet(SmartMeter.java:114)
        at de.upb.client.smartmeter.SmartMeterApplikation.main(SmartMeterApplikation.java:39)
Caused by: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.PCSC.SCardTransmit(Native Method)
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:171)
        ... 3 more2.) 3Des encryption
I want to use the 3Des algorithm to encrypt my data. I use
keyDES = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES,
                    KeyBuilder.LENGTH_DES3_2KEY, false);
cipherDES = Cipher.getInstance(Cipher.ALG_DES_CBC_ISO9797_M2, false);But i do not know what is the aquivalent on the host side??
3.) Another problem is that i am not able to send the modulus of a public key from the host applikation to the smard card
new CommandAPDU((byte) 0xb0, (byte) 0x20, (byte) 0x01, (byte) 0x00, modulus.toByteArray()); // create the apdu
// the method in the applet
private void setServerKeyMod(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        try {
            byte byteRead = (byte) (apdu.setIncomingAndReceive());
            short off = ISO7816.OFFSET_CDATA;
            // strip of any integer padding
            if (buffer[off] == 0) {
                off++;
                byteRead--;
            publicKeyServer.setModulus(buffer, off, byteRead);
        } catch (APDUException ex) {
            ISOException.throwIt((short) (SW_APDU_EXCEPTION + ex.getReason()));
    }The error code is 6700
4.) My last problem ist, that i am not able to use a value bigger than 0x7F as the ne field in the apducommand, because i get the following error
CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, data, (byte) 0xff);
java.lang.IllegalArgumentException: ne must not be negative
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:371)
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:252)I thought that it this should be possible in order to use all the bytes of the response apdu.
If you need more code to help please let me know.
Cheers
Edited by: 858145 on 06.07.2011 08:23

2) What is PKCS? what is the difference between
PKCS#11 and PKCS#15??PKCS is the abbreviation of "Public-Key Cryptography Standards"
PKCS #11: Cryptographic Token Interface Standard
See http://www.rsasecurity.com/rsalabs/node.asp?id=2133
PKCS #15: Cryptographic Token Information Format Standard
http://www.rsasecurity.com/rsalabs/node.asp?id=2141
If you want to use yor smartcard as secure token it doesn't have to be a JavaCard.
BTW: I don't remember a way to access PKCS#15 tokens on a JavaCard from within an oncard JavaCard program. If you want to use keys in your oncard program, you have to transfer it onto the card or generate it oncard and export the public key by your own oncard/offcard code.
Jan

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problems Receiving Emails and some data on WIFI since latest software update.

Problems Receiving Emails and some data on WIFI since latest software update.
My blackberry torch will not receive emails on wifi since the latest software update, I've tried numerous wifi networks and several handsets, even had them replaced and received a brand new. Still the same problem.
When turning off the wifi network on the torch, the phone will stall for 5-10min while it tries to communicate with the network (vodafone) to receive outstanding emails and data.
Can someone please inform Blackberry and get a quick fix on this

Sounds like you have Do NOt Disturb turned on.
settings - do not disturb - off

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

WRT160N v2 - problems with WPA2 and some questions about N

Similar Messages

Maybe you are looking for