WRT160N v3 barely using speeds

Hi i simply updated my router to V3 using the user friendly set up without messing with any of the setting now i did a speed test on wired connection and have 40mbs sec to download and 10 for upload when i was using the wireless connection i could only get 9mb to download and 4 to upload, is there a way to open up the wireless router to get faster speeds wirelessly or a certain settings i should use
please let me know thank you

Ttry to disable WMM.

Similar Messages

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem make an appointment at the Genius Bar of an Apple store.

My iphone 4s with the ISO 7.0.2 keeps crashing, i can barely use it as a phone. Going to switch to samsung tomorrow!!!!

Ever since i upgraded to the newer ISO 6 and above my iphone 4s keeps crashing!
I can barely use it as a phone, emails keeps crashing, crashing halfway during calls and even candy crush wont open!
I was so upset to hear that the only solution was to 'purchase the newer iphone 5c or 5s to fix this problem' as you cannot go backwards with the ISO.
I have always been loyal to Apple, but it seems such a shame that a piece of perfectly good hardware is now made obselete due to its software and the inflexibility of the company.
This is environmentally unfriendly and just a big corporates money hungry way of hitting targets and satisfying its stakeholders!
Apple if you want anymore of my money in the future, you better fix this problem.
Maybe Samsung has a better solution to my phone issues.....

Okay, switch.
Why exactly do you believe that anyone in these user to user support forums cares?
Tinglez wrote:
Ever since i upgraded to the newer ISO 6 and above my iphone 4s keeps crashing!
I can barely use it as a phone, emails keeps crashing, crashing halfway during calls and even candy crush wont open!
I was so upset to hear that the only solution was to 'purchase the newer iphone 5c or 5s to fix this problem' as you cannot go backwards with the ISO.
Maybe if basic troubleshooting was tried, instead of whining, a resolution could be found.
There is no need to purchase a newer iPhone. The 4S runs iOS6 and 7 perfectly fine.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I love using 'Speed Dail'. But now suddenly it's gone missing. Please help me get it back

I've been using Speed Dial for many months (2+years). then, suddenly one day I lost it. It is not where I can see it.
If I click the Tools Add-ons drop down I can see speed dial is there but no way can I restore the speed dial icon back to the menu bar.
Please help

My speed dial also went missing... why, I have no clue.
Regardless, I got it back as my homepage for each tab by going to TOOLS, ADD-ONS, EXTENSIONS, then selecting SPEED DIAL, and switching to ENABLE on the right side of the add-ons box.
I hope this helps!!!

Using Speed / Duration At Points In a Clip

Hi,
Great forum!
I am using Premier Pro (v6.x) and I've a clip that is ten seconds in length. Between the four and eight second mark I need to use Speed/Duration to slow this down to ~10% of the original speed. How is this accomplished?
Many thanks and keep up the great work!
Mark

Clip 1a: up to 4 s.
Clip 1b: 4 - 8 s and apply duration or time remapping for the slomo.
Clip 1c: from 8 s onwards.
You can razor the clips or use keyframes or use a copy from 4 -8 s, apply the slomo and replace the original. Many ways to achieve this.

I bought a barely used MacBook Pro and I have an old MacBook...

I bought a barely used MacBook pro and I have an old MacBook. Is there a way to make the MacBook Pro as a new out of the box computer, so I can send all my data to the "new" computer?

The Migration Assistant doesn't erase anything - it migrates or transfers data from one Mac to another, but it is a good idea to update your Mac's backup you will be migrating or transferring the data to before doing so to be on the safe side.

My ipad's battery is going flat very quickly and is using a lot of data when I am barely using it - any suggestions?

My ipad's battery is going flat very quickly and is using a lot of data when I am barely using it - any suggestions?

This is likely coming from a third-party program. You can try to Reset Firefox. [[Reset Firefox – easily fix most problems]]

At use ipsec useful speed in the channel decreases?

At use ipsec useful speed in the channel decreases? ?
Example:
remoteuser-----internet---server_with_FTP
remoteuser download (over internet) from the FTP with the sped: 15k/sec
If use this:
remoteuser(BM39vpnClient)--------INTERNET---BM39SP1--server_with_ftp
How will be decreases channel speed ?
What will be: 15 K/sec, 10 K/sec, 5 K/s ... ??
Any info, please.
Serg

serg,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

TS1398 my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Could not use "speed 10Mbps" and "duplex full" on 6504E

Hi all
Our company are using connection between 6504E (VSS) and WAN switch 2960S by the default configuration of speed and duplex (speed auto, duplex auto). Current configuration and connection please check in attached files
Due to the limitation of WAN access line, so we want to set the speed of connection to 10Mbps and duplex full
But when we applied the configuration
interface range Gx1/y1, Gx2/y2, ...
speed 10
duplex full
the interfaces on all SWs are down
Gi1/4/36                       down           down     WANSW_2960S
Gi1/4/48                       down           down     WANSW_2960S
Gi2/4/36                       down           down     WANSW_2960S
Gi2/4/48                       down           down     WANSW_2960S
Po64                           down           down      WANSW_2960S
If we used duplex auto, so the links are up. But my boss required to use "duplex full"
Please support or advice me the reason I cannot use the static setting "speed 10, duplex full" on both sites of SWs

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Unsure if it applies to the 2960S (or 6500), but on some devices auto/auto also supports auto-MDI. On those, if you hard code speed/duplex, you need to insure you're using the correct cable; cross-over for switch-to-switch.

Using speed dial button as paging on provisioned 525g's

Hello everyone!
We recently switched to a hosted phone provider with provisoning for our 2 SPA525G2's but still want to maintain an internal paging function between them using a speed dial button. For less confusion, lets call in ex5.
I have successfully created a dial plan and am able to dial *96 + extension number to activate the paging system. My objective is to just hit ex5 and having it automatically activate the paging function.
I feel I'm very close but need help with the last step.
Please help!

Thanks for your response!
Question, wouldn't that use my provisioned phone system still? How could I directly dial the LAN side IP?
I currently have (<5:[email protected]:5060>S0|xx.<:@192.168.0.104:5061>) which allows me to call the other phone but not page it.

WRT160N Slow Internet Connect Speed, while connected wired.

Ive tried two of these routers both from best buy, I took the other one back thinking it was a problem with the router which it still maybe. But, I have 20meg internet and when I run a speed test im only getting 6-7megs. When I directly connect the modem to the computer I get the full speed with no problems. I used to use the old BEFSR41 router and that always had max speed(Now the power light flashes on it, it goes steady then it starts blinking if anyone could help me with this one to would be great). But I don't know what to do.
Thanks.
Justin.

Open the setup page of the router and reduce the MTU to 1350 and click on save settings..Power cycle the router and check...On the BEFSR41 as the power light keeps flashing..it seems that it gone bad...However you may try by resetting the router for 1 minute and if the power light stops blinking then,you can configure the router.

Slo-Mo quality very bad using Speed Change

I haven't been using FCP for quite a while now (I had to change to a PC based system for all my pro work because off Apple's Blu Ray hang-ups), however I still have a lot of family video clips on my Mac Pro which I want to edit and transfer to DVD.
Like a good dog I did update my FCP to 7.0.3 a little while ago but this is the first time I've used it since.
I'm trying to create some slow motion football clips at a rate of 20%....something I had done many times before of my previous version of FCP.
The trouble is that the new version's slo-mo looks terrible compared to the old, it is very blurred indeed.
With the old version all I did was use the default Change Speed settings which basically meant writing in a figure of 20% in the rate box. I didn't alter anything else.
The same info in v7.0.3 produces something unusable. I have noticed that there are extra fields in the new version's Change Speed dialog box so I experimented with ticking OFF Frame Blending, which stopped the blurring but of course the entire clip went "juddery", again unwatchable.
All I want to do is to get the same results I used to before this update.
I have to be honest and say that I cannot remember the version number of my previous FCP but if it helps the Capture Preset I use is ProRes 422(HQ) and the Sequence Preset is ProRes 422 (HQ).....exactly as it had been before in fact.
I changed no basic Audio/Video settings since the new version....all the old ones still seemed to be there.
Is there someting I have to do in the new dialog box that I'm missing?.

OK, I have had some more time to spend on this and it seems that the problem is wider spread (I had only been working on slo-mo up to now).
I started noticing that the quality of the normal speed videos within the timeline were not as good quality as I expected.
Any video containing any motion had a distinct "fuzziness" around the edges of the moving object. This fuzziness seemed to be made up of thin parallel lines.
I exported a short clip as .mov file (using the original sequence settings) and the used Compressor to create the best quality DVD file to burn in DVD SP.
The resulting DVD video looked totally unwatchable. The parallel lines "fuzziness" had become hugely magnified making every moving object a mess of blurring.
I really need some help here because I am totally baffled. As far as I can see all the settings I have in this version of FCS are the same as I had in my previous version. When I checked my older DVDs they all looked great.
But when I used exactly the same source video files in the new version it looked diabolical.
Another slight weirdness as well, I used to quickly run a section of video from FCPs timeline via "Print-to-Video' back onto my Sony camera just to check how it looked on my HDTV. And guess what?, since the software upgrade even this has suffered a big quality loss, it now almost looks like there is a lower frame rate, about 10-15 FPS rather than the 25 it should be.
As I said previously I now do all new work on a PC but the problem is I have about 800 GB of unedited video on one of my Mac internal drives, I don't reaaly want to have to transfer all that to the PC or another drive because of time and cost. So I need to use FCS for this.
If anyone has any clues as to what is going on here I would be most grateful.
I can give some technical info if it helps.
My camera is the Sony HDR-HC7.
The FCP capture preset I use is HDV-Apple ProRes 422 (HQ).
Sequence Preset is Apple Pro-Res 422(HQ) PAL 48kHz, FS 1280*1080,FD Upper, PAR HD 1280*1080.
In Compressor I use the DVD:Best Quality 90 minutes setting.
It could be that I'm missing something very basic here, but I've checked through these settings and can't spot anything obvious to me.If anyone else can then please let me know.
I can try and provide more technical details if needed.
Sorry if this post is too long and rambling.

WRT160N V1 slow N Speeds , good g speeds

so i have a wrt160n v1 and the n speeds are horrible. very very slow. it works great on comps with a g card only but my brand new comp that has an n card that i paid extra for dont work at all hardly, its under 1mbps. so i went and bought a new wrt160n v3 the other day, hooke it up, configured it, and it works great on my new comp.
is there anyway i can get the v1 to work as good as the v3 ? there are no firmware updates for the v1 past 2008:-/ HELP ME!!!!!

i think the the router and my comp dont mix. when i secure it thats what caused the probs. the wap2 security i think cause when i removed it , it improved if i took the comp away from it. but i went out and bought the wrt320n tonite at walmart and its like WOAH. it works way better and speeds are constant and fast and idle speed is good. and when i speedtest it, its constant. im content with the new one . and the old one is i think just junk lol. cause it wolnt seem to work, its out of warranty so im screwed and had no choice
if u have any suggestions im open to any, i have 45 days to return the gigabit router.

I can't use speed editor in iMovie 10.

I don't have an option even if i click CMD & R

Hi,
if you have "wrap timeline" activated then you have to deactivate it. Speed Editor should be available then.

WRT160N v3 barely using speeds

Similar Messages

Maybe you are looking for