WRT160N v3 Easy Link Software not working; screen garbled
Up until 2 days ago, this router was the best. Then with no notice, lost all connections to wireless devices and the software loaded, but graphics on screen failed to resolve and thus unuseable. I've uninstalled & reinstalled; set & reset; plugged & unplugged. No other programs exhibit any graphics problems . Any suggestions?
You can Uninstall the Easylink advisor from your computer and do all the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
Similar Messages
-
LINK software not working on many fronts
Two issues right off the bat on BB link software
1. Cannot log in to BB ID on link. Cannot hit create new account or forget password either. Amazing really for new software. I can log right in to BB ID from browser so I know id and password work and I can see account info.
2. Trying to port over data from torch 9810 to new Q10 as per the BB instructions. Link gets hung and never does back up on Torch so worthless again.
Spent 40 mintues on phone with BB suport, then ATT, who then connected me to BB support and 3 people did nto help at all and then patch me thru to the beginning all over again. What **bleep** support. I have iphone and had many and switch is so easy. BB i always kept since liked keyboard but looks like it will be getting packed up and sent back as i think i finally am giving up on BB as its crappy software is still a nightmare like BB desktop was but at least that was better than this which has reached new low.I had a similar issue and was unable to get BB Link to sign into my blackberry ID. After trying numerous things including several reboots, reinstalls, disabling firewall etc... the following fixed my issue.
1. Complete uninstall of BB Link
2. Complete uninstall of BB Dektop Manager
3. Reboot
4. Run registry cleaner (CC Clean)
5. Reboot
6. Reinstall BB Link
7. Reboot
8. STARTED WORKING
I was able to use BB Link to transfer the settings from my Torch 9850 to my new Z10 wihtout any issues. However I did add all of my accounts to the Z10 first (4 email accounts-1 with calendar, facebook, twitter)
Give that a try perhaps it will work. I had nearly given up until i tried the complete removal and registry clean.
Good Luck
Rick -
Easy config..not work..HA
well...got my copy of 6.x and
DELETED everything from my pc ( at home )
(running win 95 ).
installed 6.x ..blah.
try to use easy config to set tnsname.ora sql*net.ora
BANG!...no go...reading the readme.xxx
easy config does not WORK..you have to MANUAL do it..
i feel sorry for new developers trying to do this..
patrick
united airlines
nullIt could be the work of one of your add-ons, or even add / mal-ware.
Type '''about:addons'''<enter> in the address bar to open your Add-ons Manager.
Hot key; '''<Control>''(Mac:<Command>)''<Shift> A)'''
In the Add-ons Manager, on the left, select '''Extensions.'''
Make sure you know what each one is and what it does.
Remove Yahoo Anything.
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
Also, check the programs that are on your computer
'''Windows:''' Start > Control Panel > Uninstall Programs.
'''Mac:''' Open the "Applications" folder.
'''Linux:''' Check your user manual.
Remove Yahoo Anything.
After, reboot the computer.
Use these after the problem is settled;
Bookmark and use this;
'''[https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
This add-on is very simple: on installation, it backs up and
then resets your search preferences and home page to their
default values, and then uninstalls itself. This affects the
search bar, URL bar searches, and the home page.
'''[https://addons.mozilla.org/en-US/firefox/addon/settings-guard Settings Guard for Firefox]''' {web link}
Detects and resets changes to settings that are frequently done
by add-ons and application installers. -
Copy Protection without DLT - Link does not work
I'm trying to find out how I can protect DVDS with Encore. Or if anyone knows of reasonably priced software to do this. I see there is a link to something called, Protection without DLT, but the link does not work....
Help!
JessicaCSS keys are only licensed to replicators, player manufacturers, etc. so it is highly unlikely that there will ever be a free solution for creating encrypted DVDs.
CSS encryption is worthless, by the way. It has been compromised for over a decade. There are more complex copy-protection methods available that work by creating malformed structures on the DVD meant to confuse "ripping" programs. However, they are an additional cost from third parties and, more significantly, they run the risk of making your product incompatible with older players or with some computer DVD-ROM drives or software players.
Your replication facility can tell you which additional copy-protection methods they offer and what their cost is. -
Slow-link detection not working.
Slow-link detection not working.
In our branch office in Ethiopia we are experiencing some issues with the access to mappings. Our main office is located in the Netherlands. The Offices are connected with a VPN site2site solution.
We map a home folder to H:\ (which is working).
We map a Document share to L:\ (which is not working).
We map a Programs share to X:\ (which is not working).
All shares are DFS namespace.
We have set the according GPO which results in the following reg keys:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\NetCache\SlowLinkParams]
"\\\\DOMAIN.XXX.NL\\dfsdata"="Latency=32000"
"\\\\DOMAIN.XXX.NL\\dfsdata\\Home1"="Latency=360"
"\\\\DOMAIN.XXX.NL\\dfsdata\\Home2"="Latency=360"
"\\\\DOMAIN.XXX.NL\\dfsdata\\ConcernData"="Latency=360"
"\\\\DOMAIN.XXX.NL\\dfsdata\\Programs"="Latency=360"
The detection says in the eventvwr (OfflineFiles) says:
Path \\ DOMAIN.XXX.NL \dfsdata\home1 transitioned to slow link with latency = 106 and bandwidth = 270472
So the Homedrive is working.
But when I try to access the DFS root I get:
Windows cannot access "\\DOMAIN.XXX.NL\dfsdata
You do not have permission to access....."
And yes, the user has permission.
So the L-drive and X-drive are not accessible.
How come?Hi,
>>Slow-link detection not working.
Did we check group policy result to see if the policy setting was applied successfully? We can run command gpresult/v or gpresult/z to collect group policy result.
Besides, instead of just focusing on slow link, this issue may be related to DFS namespace.
Regarding this point, the following blog can be referred to for more information.
Using DFS Namespaces and Offline Files
http://blogs.technet.com/b/filecab/archive/2006/01/19/using-dfs-namespaces-and-offline-files.aspx
Regarding how to troubleshoot DFS namespace problem, the following article and blog can be referred to for more information.
How to troubleshoot Distributed File System Namespace access failures in Windows
http://support.microsoft.com/kb/975440/en-us
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen -
Reply link does not work on ipad
After logging in to this group, the reply link does not work on either my ipad 2 running IOS 8.1.3 nor my iphone 4 running 7.1.2. Not helpful really. I have had to switch on my old laptop.Also I never know which group to post a new question in, The names like Snow Leopard dont really give me a clue, so if the key word does not find an existing topic, i just end up guessing.
You seem to have double posted, Lynne. I have replied on the other one.
Snow Leopard is one of the Apple operating Systems (OS X) as opposed to iOS -
Dashboard link is not working from BI Publisher
Dashboard link is not working from BI Publisher. Please let me know How to fix this problem.
Please somebody guide me.
Dashboard link is working fine from the Apps Server Machine. But the link is not working from other machines. Do I need to setup machine.domain:<port_number> any where.
Thanks,
Vara -
Multi scanner software not working after E71 FW U...
Multi scanner software not working after E71 FW Update to 3.1
Nice bit of trouble-shooting. Thanks for sharing the final solution.
-
APPLE SENT ME AN E-MAIL WITH A LINK TO RENEW MY ONE TO ONE SUPPORT. THE LINK DOES NOT WORK. AFTER I LOG INTO MY APPLE ACCOUNT AND CLICK "RENEW NOW" FOR ONE TO ONE, AN ERROR MESSAGE APPEARS SAYING "PAGE NOT FOUND". AMAZING. WHEN I TRY TO CALL THE TOLL FREE APPLE SUPPORT NUMBER FROM MILAN, ITALY WHERE I AM NOW LIVING, IT DOESN'T WORK. THE ITALIAN SUPPORT DESK APPEARS TO BE AVAILABLE ONLY ON WEEKDAYS DURING NORMAL BUSINESS HOURS. HOW CAN I REACH A LIVE APPLE SUPPORT PERSON?
Start by going here - https://expresslane.apple.com/GetproductgroupList.action?locale=it_IT
Best of luck. -
A/R Invoice linked object not working all the time
I have a LinkedButton that is set to SAPbouiCOM.BoLinkedObject.lf_Invoice. When the selected A/R Invoice has a Document Type of Service the link works. When the selected A/R Invoice has a Document Type of Items the link does not work and I get the following error:
"No matching records found 'A/R Invoice' (ODBC -2028)"
I there another property that I should be setting? I could not find anything.Hi,
I've added a code sample that works fine for me.
add this code to a simple vb project with the correct references....
1. Enter a number of the Invoice you want
2. click on the second EditText to set the linkedButton
3. click the LinkedButton
<i>Public WithEvents m_App As SAPbouiCOM.Application
Private Sub Class_Initialize()
Dim oForm As SAPbouiCOM.Form
Dim oDBDS As SAPbouiCOM.DBDataSource
Dim oItem As SAPbouiCOM.Item
Dim oLB As SAPbouiCOM.LinkedButton
Dim oST As SAPbouiCOM.StaticText
Dim oET As SAPbouiCOM.EditText
Set m_App = getCurrentApplication()
' m_App.MessageBox "You have COM UI connection"
'form
Set oForm = m_App.Forms.Add("UUID")
oForm.Height = 150
oForm.Width = 400
oForm.Top = 100
oForm.Left = 400
Set oDBDS = oForm.DataSources.DBDataSources.Add("OINV")
'Edittext
Set oItem = oForm.Items.Add("EditT", it_EDIT)
oItem.Left = 200
oItem.Width = 40
oItem.Top = 50
oItem.Height = 15
Set oET = oItem.Specific
Call oET.DataBind.SetBound(True, "OINV", "DocNum")
'static
Set oItem = oForm.Items.Add("StaticT", it_STATIC)
oItem.Left = 50
oItem.Width = 100
oItem.Top = 50
oItem.Height = 15
oItem.LinkTo = "EditT"
Set oST = oItem.Specific
oST.Caption = "Business Partner Code"
Set oItem = oForm.Items.Add("EditT2", it_EDIT)
oItem.Left = 200
oItem.Width = 40
oItem.Top = 80
oItem.Height = 15
Set oET = oItem.Specific
Call oET.DataBind.SetBound(True, "OINV", "DocNum")
Set oItem = oForm.Items.Add("StaticT2", it_STATIC)
oItem.Left = 50
oItem.Width = 100
oItem.Top = 80
oItem.Height = 15
oItem.LinkTo = "EditT2"
Set oST = oItem.Specific
oST.Caption = "Business Partner Decs"
'linked button
Set oItem = oForm.Items.Add("Linked", it_LINKED_BUTTON)
oItem.Left = 180
oItem.Top = 50
oItem.LinkTo = "EditT"
Set oLB = oItem.Specific
oLB.LinkedObject = lf_Invoice
oForm.Visible = True
End Sub</i>
Regards,
Yaniv G.
SDK Consultant,
SAP Manage Israel. -
I have updated my firefox to version 15.0. After this I have the effect that at some unspecified time during use many of the functions stop working. Menu's do not open, download links do not work anymore and so on. Opening new tab's or windows still works. Links on pages partly work partly not. Copy and paste does not work anymore on webpages. It takes ending the firefox process and restarting to correct the issue until it happens again. I have those effects on totally different webpages. At this time it happens every time after I start Firefox but not right away. Firefox first works for some time and then it suddenly doesn't anymore without me having done anything special
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
Link is not working for one role. how to check please guide.
Hi Expert,
I have a simple question but as don;t aware of some of the techincal area not able to understand where to check.
I have a link under document flow in offer( opportunity) where for one role sales support user the link is not happening. I have checked for other role its working fine.I understand that for this role the link will not work as per the role maintianed.
But where this link got maintained and how i will be able to check which link is tagged to which profile.
rolewise mappeing with link.
Please guide.
Prem.Hello Prem,
Please check the navigation bar profile from your business role.
Then go to the navigation bar profile settings, you can find the details settings there.
If it is a link under some work center, you need to start from the work center.
If it is a direct link, then start from the derect link group.
Hope this could be helpful.
Best regards,
'Maggie -
I want to import bookmarks from Explorer and I go to File Tab and the IMPORT link is not working or not illuminated?
Make sure that you not run Firefox in permanent [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode" -
I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.e
I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply
-
This link is not working. Please if you can access this l...
this link is not working. Please if you can access this link send me the text from it (as an attachement by email)
Is the SQL being passed to Access valid for Access:
SELECT Orders.*, Tickets_detail.OrderID2 AS T2, Tickets_detail.Price, Tickets_detail.ticketname FROM Orders JOIN Tickets_detail ON Orders.OrderID = Tickets_detail.OrderID2 WHERE EventID =24 AND AuthNetCode =1 AND OrderType IS NULL ORDER BY orderID2 DESC
(that's from your error msg)
Can you run that on Access?
I suspect the JOIN syntax might be different.
Any reason why you're running SQL Server on live, and Access on dev? You're making a bit of a rod for yourself there.
Adam
Maybe you are looking for
-
Hi Guys, I am admin on this machine. I have tried regedit as suggested for the .cdda error (1402 1406 errors) with the .aif\OpenWithProgIds entry, but have had no luck 1. There is no key within this subdirectory (Get error - 'Cannot Open OpenWithProg
-
Hyperlink using formula in Crystal Reports 8.5
Is there a way to create hyperlink formula to link to nth page in the report (in the exported pdf file) for example: i want to created a link to a text and when clicked on the link it should take me to page 8 in the same report. Thanks -Vivek
-
It does not matter how long or short the video clip is. it always "buffers". i have a decent amount of Ram at 4Gb, 2.5 Ghz intel quad core processor
-
Hi, How can i export a UIComponent (like DataGrid, Panel etc) to PPT as a image. Thanks in Advance
-
Passing select options to a subroutine
hi experts can somebody tell me how to pass a select options to a subroutine. tell me how to pass using pass by reference and value. thanks.