WRT160N V3 Original Firmware

i have this problem, Network magic updates my router's firmware and i notice that the access restriction tab had gone. should i downgrade the firmware from its originat state and where can i get the firmware with access restriction feature? please help.. thanks in advance!
Solved!
Go to Solution.

i really not sure what version of firmware originally installed with this router but the first time i set it up, it has access restriction tab/menu that i can create internet access policy for different group of computers, i can set schedules (day and time) in accessing the internet but when network magic did some update, no more access restriction tab on the menu, i saw this firmware version 3.0.02 after the 1st firmware upgrade, looking for luck to get that access restriction tab back, i download and installed the latest firmware version 3.0.03 build 3 but no success. and i also notice that my internet connection slows down after the 1st and 2nd update. sir, can you help me locate the original firmware on this device? by the way, the bottom panel shows that this router has model number WRT160N V3 but the box indicated that it is WRT160N-SG. thanks for the reply sir, hope you can help me again.

Similar Messages

Satellite A105-S1013: Need CDW/DVD drive original firmware?

I flashed the wrong firmware model of my CDW/DVD optical drive and now the drive is not being recognized by WinXP. It simply vanished...
I would like to re-flash the correct original firmware for this drive.
The drive is a TSST model TS-L462C TO10.
Can anybody help me locate the original firmware for this drive model?
I know the firmware are very model specific and are not interchangeable.
I searched all Toshiba/Samsung sites to no avail.
Tks in advance for any help...

Thanks, but unfortunately none of these sites offers a TS-L462C TO10 firmware - they offer other models.
I am under the impression this is a rather new firmware code which has not been widely divulged yet. My computer is rather new ( 3 months since I bought it).
Anybody has or knows who has this firmware ??
Thanks

HT3939 what is the original firmware for iphone 3gs model number a1303?

what is the original firmware for iphone 3gs model number a1303?

What does it matter?
What is the issue you are trying to resolve?
The current version of iOS for the 3GS is 6.1.2.

Restoring original firmware *without* iPod updater?

Recently (since upgrading to iTunes 6?), my 2nd gen iPod no longer mounts (on OS X or winXP). I'd like to roll back the firmware to try an earlier version, but this isn't possible with the iPod Updater software, since my iPod doesn't appear on my computer.
Can you restore the original firmware from the iPod ROM without using the updater? (ie. using some sort of button combination or hardware switch)
Also: my iPod charges over firewire when connected to the computer, but doesn't mount, so I'm guessing it isn't a firewire problem.

Absolutely, I have run into the same exact problem with my 20g iPod (second generation). It no longer mounts to the desktop or to iTunes. I've removed iTunes and attempted to reinstall the iPod Updater, but limits the updater to my hd, since the iPod fails to mount properly.
Also, if you check your system profiler, you'll see (most likely) that it is still reading the presence of the device. It's there, but it isn't. The device works fine when on its own, but simply does not mount.
They need to give us a solution ASAP that doesn't destroy all the information on our devices. We are sinking together.

Needed: EA3500 Original Firmware

If someone has the original firmware for the EA3500 I would appreciate a copy. I need to downgrade my router after Cisco sabotaged it with their Cloud Connect. This will be the firmware you have right out of the box. Be sure you go into the Admin. section and Save a Copy before you ever connect to the Internet. Also Uncheck the Auto Updates box or you will be fed the Cloud Connect (and its amazing Terms Of Service). Thank you for any help
Solved!
Go to Solution.

Was checking for more info about this concern and I stumbled upon this, looks like Cisco is addressing this concern:
Title: Rolling back the Cisco Connect Cloud firmware of Linksys Smart Wi-Fi routers to the standard web-based setup page
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=227c9e6286124532ac52a643ca4122a5_Rolling_back_the_...

Restore original firmware on linksys WRT54GL v1.1 from DD WRT VER 2.3 SP2

Helo.
Did someone know the procedure to restore the original firmware ?
Thanks a lot.
Silviu

You can try it thru the TFTP.
Click here for more info.
C | EH
linksyshelp.blogspot.com

Original Firmware

Is it possible for me to go back to the original firmware installed on my ipod (30gb With Video).
Ever since i've downloaded iTunes7 and this stupid firmware upgrade my ipod, computer, and Itunes have been running super slow and nasty.

Okay, in clicking restore, it will format it (everything is backed up but im trying NOT to reformat it being that i have almost 4,000 songs and full seasons of TV shows and it would take almost 2 days to refill it and thats 2 more days that I, the one that spent $323.89 on a product, should not have to wait) and how am i, or you for that fact sure it will bring it back to the original state so that i may return to using iTunes6? It certainly didnt format the ipod when i upgraded, it shouldn't when i want to downgrade. Sorry if i sound like an @$$, but i'm overly fustrated right now.
-TY
Dude... Its a Dell Windows XP Pro

Linksys ea4500 original firmware

after upgrading the original firmware on linksys ea4500 its almost impossible to get the original back because linksys does not provide the link to the download- anyway i stumbled on this link when searchin the web to solve my problems so I just wanted to make it easier for al you others
just copy paste to your browser
http://download.linksys.com/updates/to0037258865.pdx/FW_E4200_2.0.36.126507.SSA
/enjoy

Are you trying to assign a static ipv6 dns on the router? I think it is not possible yet but maybe if they will do an update or if it will be part of the update (if ever) that they will do on the classic firmware. For the EA routers, IPV6 packets are embedded in the IPV4 and the router will convert it using the 6rd tunnel.

TS-L633N original firmware

I need the original firmware of the CD/DVD drive TS-L633N
Anyone knows where I can find it??

Hi there @Siwiman,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are looking for original firmware for your TS-L633N.
The available drivers and software for the components in your notebook are available on this page:
HP Pavilion dv6-3190ed Entertainment Notebook PC
It is possible, that one of the packages in the multimedia category, may have something of use to you, although I do not believe the firmware is there. The other option would be just to search the internet, but as in all cases on the internet, treat any unfamiliar site, as if it is a source of the plague. Use caution.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

N70 original firmware

i have recently upgraded to latest firmware but is there anyway i can go back to the original firmware.

It might be an issue of the new firmware. But the best thing which you can do is to change ur phone, its too old and i think nokia is never gonna fix it. Buy an N96 or some other latest phone.
Phones used: Nokia N70 --> Nokia 5610 XpressMusic
Current Phone: Nokia N96
Firmware Version: 30.033

Backup Original Firmware E3000 - Need Small Push to Start

I am newbe and just bought a E3000. I downloaded and read the manual and read various posts for initial setup. I also reviewed various posts for flashing firmware, including the hard reset, 30/30/30 and power cycle. I also understand there are different views on which flashing method to use or, on a different subject, whether or not to use Cisco Connect. I have viewed issues or mixing Cisco Connect with web based management and certain downfalls.
I have tried to review the web site for information to help the first setup go somewhat right (or at least try to avoid the somewhat wrong).
However, I haven't seen one issue. I want to flash the E3000 with the current firmware, but I would like to backup the original firmware loaded at the factory. I see there is a backup in Administration, but it seems only to backup configuration settings, not the firmware.
Since flashing should wipe out configuration settings with the hard reset, 30/30/30, it doesn't seem logical to start the Cisco CD for Cisco Connect (i.e. - start the initial setup) and then poke and hope to find a command to gui to backup the firmware, if any. The web site does not list the original factory firmware for downloading purposes.
I haven't even plugged the unit in and powered it up.
I want to backup the original factory firmware. How? Thanks.

Just thought I would reply. You were right Wizard. I could not find any option in Cisco Connect or the web gui to enter a line command mode. Later I may try to link into the router with telnet or something else, assuming the standard port can be used or if that port is not disabled by the factory, and, of course assuming it can be done. Kinda surprising there is not an administration hardware port. But Cisco Connect or the web gui should have access to a line command mode to operate. After all either gui should only represent or execute some line command program or parameter.
But went ahead and flashed before loading Cisco Connect. Did a 30/30/30 before, then flashed and let nvram build after reboot, then power cycle and finally another 30/30/30. Flash seems OK. Been up for couple of days.
Never used the CD - just used Cisco Connect upgrade from download (installed after flash only). Seems that you can use Advance features (enter web administration mode) as long as you do not change any password. Reviewing the web access, it seems very easy to administer without Cisco Connect, but haven't had time to play.
Thanks again for your reply.

Backup original firmware

Hello together,
is it possible to backup original firmware of a nokia phone before updating it ?
If not, where can I get original firmware of my phone ?
Any suggestions ?

Your only backout option at the minute would be via a service centre. This has been suggested many times however no-one's ever confirmed whether a service centre has installed a previous version of firmware for them.

Possible to Have the DVD Drive: SHW-160H6S OEM Original Firmware (FW Version: CP81)

Hello,
I have a Compaq Presario SR1850NX desktop computer. It's about 8 years old now but what I want to talk about today is specifically about the DVD Burner that comes included with the desktop.
The model is a Liteon SHW-160H6S OEM drive packaged with the CP81 firmware (OEM firmware, not retail firmware).
A few years ago, I decided to flash the firmware for the sake of updating using the provided firmware available on the HP site which was version CP91. After the seemingly successful flash, my dvd burner would never work properly again. The DVD burner will still turn on and can still open and close the disc tray but won't detect or read the DVD/CDs but is properly detected by the BIOS and by Windows.
I have looked online by myself to figure out how to unbrick my drive after the failed firmware upgrade but with no luck. Now I ask any of you if you may possibly have this working dvd drive which may be like finding a needle in a haystack but still worth asking so I can receive a copy of your working or original firmware. I tried to flash it after the unsucessful flash but it seems like it has no effect.
Retail firmwares won't work since this drive won't accept it. Also...
@HP Customer Service
If you have the original firmware possibly somewhere in your archivces but I won't bet on it, it would be great if you could provide me access to it so I can try to revive my dead DVD drive. Many thanks and I just hope I can get this drive working again someday!
For reference,
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&product=1843679

Cats869, welcome to the forum.
The only Firmware that is available for the Drive is in the "Drivers" section of the link that you provided.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Wrt160n v2 router firmware broken

Hi,
I just upgraded my router firmware to the latest version as found here: http://www.linksysbycisco.com/US/en/support/WRT160N/download Installing this version was really a bad idea though... My mac's could not connect anymore, after a lot of searching I finally downgraded like described here: http://audipages.com/router/. This worked but the connection is kind of unstable now.. I can not put the router in Wireless N only because then Mac's and Windows computer can not connect anymore.
Another thing is that the localized Dutch version of the site has a completely different firmware version of the same router: http://www.linksysbycisco.com/NL/nl/support/WRT160N/download....
So obvious question is: What is the preffered and recommended router firmware version for the WRT160N v2.
Thanks in advance,
Lars

The first thing is that it is not advisable to downgrade the firmware.It is recommended that to always use the firmware based on the model and the version no of the device..Area-wise the firmware does not differ a lot,however it is always preferred to use the firmware area-wise for the particular unit due to some limitation.
It is advisable to reset the router after upgrading the firmware.So reset the router for 35 seconds,power cycle the router and reconfigure the router from scratch.

Cannot restore original iPhone to original firmware, can someone help?

Alright, I have tried literally everything virtually possible to fix my iPhone. Currently it is in this state:
And I want to fix it up and make it back to the original iPhone firmware. It currently has no firmware installed. It cannot install any firmware and if I try it will just fail. Please help.

**SOLVED***
After wasting 6hrs and trying everything under the sun, Redsnow, TinyUmbrella, Snowblizzard, Ziphone, ect, ect..
I was able to resolve this by simply switching usb ports.. I was dong this on an Acer netbook and just went from the 2 usb portside to the main one near the power source.. RESTORED via Itunes and I am back to a working phone...
Not sure what caused the issue tho, as I was on a (presumebly) bone stock Iphone and simply tried to update the software from the phone...
oNe

WRT160N V3 Original Firmware

Similar Messages

Maybe you are looking for